GYD1E151MCW1GS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**GYD** Chip Type, 150°C High Reliability ~~Az~~ Ay **NEW** High Reliability, Low ESR,High ripple current. : Long life of 1000 hours at 150°C. Kee 

Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. 

**GYD** High Temperature **GYC** ~~|~~ Specifications Item Performance Characteristics ~~Re |~~ Category Temperature Range –55 to +150°C Rated Voltage Range 25 to 35V ~~Rs~~ Rated Capacitance Range 100 to 270µF ~~ns~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~es~~ Rated voltage (V) 25 35 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (MAX.) 0.14 0.12 ~~a OES~~ ESR Less than or equal to the specified value at 100kHz, 20°C ~~Rs a~~ Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics Z– 25°C / Z+20°C 2 (Max.Impedance Ratio) Z– 55°C / Z+20°C < 2.5 (100kHz) ~~eeee~~ The specifications listed at right shall be met when the Capacitance change Within ± 30% of initial capacitance value Endurance capacitors are restored to 20°C after D.C. bias plus  rated tan δ 200% or less of the initial specified value ripple current is applied for 1000 hours at 150°C, the peak ESR 200% or less of the initial specified value voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value The capacitors are kept on a hot plate for 30 seconds, Capacitance change Within±10% of the initial capacitance value Resistance to Soldering Heat which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. tan Leakage currentδ Less than or eLess than or equal to the initial specified valuequal to the initial specified value Marking Black print on the case top. ~~es~~ 

## Dimensions 

| Dimensions Type numbering system  (Example : 35V 100µF) ® Positive (φ8, φ10 ) Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Trade markVoltage (V:35V) Series oe 0.3 MAX. C±0.2 G Y D LT 1 V ILL.) 1 0 1 M C Q 1 G S Taping code : Size code Configuration | Capacitance tolerance (±20%) (De || _|[RAE | —[-———— Rated capacitance (100µF) . Lot No. Capacitance LPEN L±0.5 ia ~~G~~ H Negative Rated voltageSeries name (35V) Type | Dimensions (mm) Voltage V **25 35** φD×L φ8 × 10 φ10 × 10 V 25 35 A 9.0 11.0 Code E V Cap.(µF) **1E 1V** B 8.3 10.3 ~~——_ 7~~ **100** 101 8 × 10 27 1400 C 8.3 10.3 ~~eeeeee~~ E 3.1 4.5 **150** 151 8 × 10 27 1400 10 × 10 20 1800 ~~a ee~~ L 10.3 10.3 **220** 221 Case size H 0.8 to 1.1 0.8 to 1.1 ~~jf~~ **270** 271 10 × 10 20 1800 φ(mm)D × L ESRmΩ mArmsRipple The vibration structure-resistant product is also available upon request, please ask for details. ESR at 20°C 100kHz Rated ripple Current at 150°C 100kHz 

## Frequency coefficient of rated ripple current 

0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 

Apr.2020