GYC1V680MCQ1GS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**==> picture [79 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
GYC<br>**----- End of picture text -----**<br>


Chip Type, 135°C High Reliability 

**==> picture [57 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
NEW<br>**----- End of picture text -----**<br>


High Reliability, Low ESR,High ripple current. Long life of 2000 to 4000 hours at 135°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. **GYC** High Temperature **GYA** ~~J~~ Specifications Item Performance Characteristics ~~Ee~~ Category Temperature Range –55 to +135°C ~~a~~ Rated Voltage Range 25 to 63V Rated Capacitance Range 10 to 330µF ~~ot~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C Rated voltage (V) 25 35 50 63 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (MAX.) 0.14 0.12 0.10 0.08 ESR Less than or equal to the specified value at 100kHz, 20°C ~~___~~ Leakage Current ~~(eS~~ After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). ~~ee~~ Temperature Characteristics Z– 25°C / Z+20°C 2 (Max.Impedance Ratio) Z– 55°C / Z+20°C 2.5 (100kHz) ~~ee ee~~ The specifications listed at right shall be met when the capacitors Capacitance change Within ± 30% of initial capacitance value are restored to 20°C after D.C. bias plus rated ripple current is tan δ 200% or less of the initial specified value Endurance applied for 4000 hours (2000 hours for φD = 6.3) at 125°C or ESR 200% or less of the initial specified value 135°C, the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~ee~~ Shelf Life After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~ee~~ Damp Heat The specifications listed at right shall be met when the capacitors Capacitance change Within±30% of the initial capacitance value are restored to 20°C after the rated voltage is applied for 2000 tan δ 200% or less of the initial specified value (Steady State) hours (1000 hours for φD  =  6.3) at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~ee~~ The capacitors are kept on a hot plate for 30 seconds, Capacitance change Within±10% of the initial capacitance value Resistance to Soldering Heat which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. tan Leakage currentδ Less than or eLess than or equal to the initial specified valuequal to the initial specified value ~~fe~~ Marking Black print on the case top. Dimensions Type numbering system  (Example : 35V 47µF) Positive (φ6.3 ) Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage (V:35V) Series 0.3 MAX. C±0.2 G Y C 1 V 4 7 0 M C Q 1 G S Taping code ET Size code Configuration Capacitance tolerance (±20%) Rated capacitance (47µF) Lot No. Capacitance L±0.3 H Negative Rated voltage (35V) I—_| _J, ss Series name Type Positive (φ8, φ10 ) Plastic platform Trade markVoltage (J:63V) Series 0.3 MAX. C±0.2 φD×L φ6.3 × 5.8 φ6.3 × 7.7 φ8 × 10 φ10 × 10(mm) VoltageV 25 35 50 63 A 7.3 7.3 9.0 11.0 Code E V H J B 6.6 6.6 8.3 10.3 C 6.6 6.6 8.3 10.3 E 2.2 2.2 3.1 4.5 L 5.8 7.7 10.3 10.3 Lot No. Capacitance cif|__| L±0.5 itL H ~~fe~~ Negative ~~F~~ H 0.5 to 0.8 S=== 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 φ6.3×7.7L, φ8×10L, φ10×10L : The vibration structure-resistant product is also available upon request, please ask for details. 

Dimension table in next page. 

116 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GYC** 

## Dimensions 

**==> picture [512 x 37] intentionally omitted <==**

**----- Start of picture text -----**<br>
V (Code) 25 35 50<br>Cap.(µF) 1E 1V 1H<br>Code<br>**----- End of picture text -----**<br>


|V (Code)<br>Cap.(µF)<br>Code|V (Code)<br>Cap.(µF)<br>Code|**25**|**25**|**25**|**25**|**35**|**35**|**35**|**35**|**50**|**50**|**50**|**50**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||1E||||1V||||1H||||
|||||||||||||||
|**10**|100|||||||||||||
|**22**|220|||||||||6.3 × 5.8|80|1100|750|
|**33**|330|||||||||6.3 × 7.7|45|1600|1100|
|**47**|470|||||6.3 × 5.8|60|1400|900|||||
|**56**|560|6.3 × 5.8|50|1400|900|||||||||
|**68**|680|||||6.3 × 7.7|40|1900|1400|8 × 10|30|2200|1250|
|**100**|101|6.3 × 7.7|35|1900|1400|||||10 × 10|28|2600|1600|
|**150**|151|||||8 × 10|27|2900|1600|||||
|**220**|221|8 × 10|27|2900|1600|||||||||
|**270**|271|||||10 × 10|20|3300|2000|φD×L|ESR<br>mΩ|Rated ripple Current<br>(mArms)||
|**330**|331|10 × 10|20|3300|2000|||||||125℃|135℃|



**==> picture [218 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
V (Code) 63<br>Cap.(µF) 1J<br>Code<br>**----- End of picture text -----**<br>


|V (Code)<br>Cap.(µF)<br>Code|V (Code)<br>Cap.(µF)<br>Code|**63**|**63**|**63**|**63**|
|---|---|---|---|---|---|
|||1J||||
|||||||
|**10**|100|6.3 × 5.8|120|1000|700|
|**22**|220|6.3 × 7.7|80|1300|900|
|**33**|330|8 × 10|40|1900|1100|
|**47**|470|||||
|**56**|560|10 × 10|30|2300|1400|
|**68**|680|||||
|||φD×L|ESR<br>mΩ|Rated ripple Current<br>(mArms)||
|||||125℃|135℃|
|ESR at 20°C 100kHz<br>Rated ripple Current at 125°C or 135°C 100kHz||||||



## Frequency coefficient of rated ripple current 

0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 

Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18,19. Please refer to page 3 for the minimum order quantity. 

117