GYC1H680MCQADNGS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

Chip Type, 135°C High Reliability 

## **GYC** 

High Reliability, Low ESR,High ripple current. Long life of 2000 to 4000 hours at 135°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. 

## Specifications 

## **GYD** 

High Temperature **GYC** High Temperature **GYA** 

Item Performance Characteristics Category Temperature Range –55 to +135°C ~~dtd~~ Rated Voltage Range 16 to 80V Rated Capacitance Range 10 to 560µF ~~SSsio4H-_,—_—_1]7>NY9Y>)>->59"———~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C Rated voltage (V) 16 25 35 50 63 80 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.16 0.14 0.12 0.10 0.08 0.08 ESR Less than or equal to the specified value at 100kHz, 20°C ~~——————— eee~~ Leakage Current ※ After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). ~~a~~ 80V : After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV(µA). Temperature Characteristics Z(– 25°C) / Z(+20°C) 2 ~~a~~ (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 2.5 (100kHz) The specifications listed at right shall be met when the capacitors Capacitance change Within ± 30% of initial capacitance value Endurance are restored to 20°C after D.C. bias plus rated ripple current is tan δ 200% or less of the initial specified value applied for 4000 hours (2000 hours for φD = 6.3) at 125°C or ESR 200% or less of the initial specified value 135°C, the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~|~~ Shelf Life After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~ee~~ Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~a~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Ctan Leakage currentapδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value ~~I~~ Marking Black print on the case top. 

Dimensions 

※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) 

**==> picture [513 x 330] intentionally omitted <==**

**----- Start of picture text -----**<br>
Positive<br>(φ6.3 )【Standard】 Type numbering system  (Example : 35V 47µF)<br>Plastic platform<br>Voltage (V:35V) Series 0.3 max. C±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>G Y C 1 V 4 7 0 M C Q 1 G S<br>“I } AL oo Taping code<br>Size code<br>Configuration<br>Capacitance tolerance (±20%) Size Code<br>OW t Rated capacitance (47µF i ) Standard CQ NZ(16.5L)<br>Lot No. Capacitance L±0.3 H Negative Rated voltage (35V) Vibration<br>Series name Resistance CW NW(16.5L)<br>QP a : LS Type<br>Positive<br>(φ8, φ10 )【Standard】 Standard (mm) Vibration Resistance (mm)<br>Trade markVoltage (J:63V) Series Plastic platform0.3 max. C±0.2 AφD×L 6.3 × 5.87.3 6.3 × 7.77.3 8 × 109.0 10 × 1011.0 10 × 12.511.0 10 × 16.511.0 AφD×L 6.3 × 7.77.3 8 × 109.0 10 × 1011.0 10 × 12.511.0 10 × 16.511.0<br>B 6.6 6.6 8.3 10.3 10.3 10.3 B 6.6 8.3 10.3 10.3 10.3<br>=—(| S C SEEEEE 6.6 6.6 8.3 10.3 10.3 10.3 C 6.6 8.3 10.3 10.3 10.3<br>E 2.2 2.2 3.1 4.5 4.5 4.5 E 2.2 3.1 4.5 4.5 4.5<br>L 5.8 7.7 10.3 10.3 12.5 16.5 L 7.7 10.5 10.5 12.8 16.8<br>H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 1.1 to 1.5 H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5<br>Lot No. Capacitance L±0.5 H Negative Voltage Frequency coefficient of rated ripple current<br>V 16 25 35 50 63 80 Frequency 120Hz 1kHz 10kHz 100kHz or more<br>Code C E V H J K Coefficient 0.15 0.40 0.75 1.00<br>|__| aa Positive 6 °<br>(φ6.3 )【Vibration Resistance】<br>Voltage (V:35V) Series Plastic platform (φ8, φ10 )【Vibration Resistance】 Positive<br>, y w 0.3 max. C±0.2 Voltage (H:50V)Trade mark Series Plastic platform 0.3 max. C±0.2<br>H<br>CS Lot No. Capacitance L±0.5 Negative Lot No. Capacitance L±0.5 = — H Negative at<br>Dimension table in next page. eS Aid electrode<br>fe Cae<br>CAT.8100N<br>0.5 max.<br>A1 47V GYC D±0.5φ B±0.2 E A±0.2<br>0.5 max.<br>A1 56J GYC D±0.5φ B±0.2 E A±0.2<br>0.5 max.  max.<br>5<br>0.<br>E<br>n2 68V GYC D±0.5φ B±0.2 A±0.2<br>n2 68H GYC D±0.5φ B±0.2 E A±0.2<br>**----- End of picture text -----**<br>


**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GYC** 

Dimensions 

**==> picture [512 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Ripple<br>Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（µA） ESR（mΩ）max.  （mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） 125℃/ 135℃/<br>100kHz 100kHz<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）|Rated Ripple<br>（mArms）|Part Number|
|---|---|---|---|---|---|---|---|---|
|||||||125℃/<br>100kHz|135℃/<br>100kHz||
||||||||||
|16<br>（1C）|82|6.3×5.8|0.16|13.12|50|1500|950|GYC1C820MCQ1GS|
||150|6.3×7.7|0.16|24.0|30|2000|1500|GYC1C151MC□1GS|
||270|8×10|0.16|43.2|25|3100|1700|GYC1C271MC□1GS|
||470|10×10|0.16|75.2|20|3400|2100|GYC1C471MC□1GS|
||560|10×12.5|0.16|89.6|16|3600|2400|GYC1C561MC□1GS|
|25<br>（1E）|47|6.3×5.8|0.14|11.75|50|1400|900|GYC1E470MCQ1GS|
||56|6.3×5.8|0.14|14.00|50|1400|900|GYC1E560MCQ1GS|
||68|6.3×7.7|0.14|17.00|30|1900|1400|GYC1E680MC□1GS|
||100|6.3×7.7|0.14|25.00|30|1900|1400|GYC1E101MC□1GS|
||150|8×10|0.14|37.50|27|2900|1600|GYC1E151MC□1GS|
||220|8×10|0.14|55.00|27|2900|1600|GYC1E221MC□1GS|
||270|10×10|0.14|67.50|20|3300|2000|GYC1E271MC□1GS|
||330|10×10|0.14|82.50|20|3300|2000|GYC1E331MC□1GS|
||470|10×12.5|0.14|117.50|16|3500|2300|GYC1E471MC□1GS|
||560|10×16.5|0.14|140.0|12|4800|2900|GYC1E561MN□1GS|
|35<br>（1V）|33|6.3×5.8|0.12|11.55|60|1400|900|GYC1V330MCQ1GS|
||47|6.3×5.8|0.12|16.45|60|1400|900|GYC1V470MCQ1GS|
||68|6.3×7.7|0.12|23.80|35|1900|1400|GYC1V680MC□1GS|
||100|8×10|0.12|35.00|27|2900|1600|GYC1V101MC□1GS|
||150|8×10|0.12|52.50|27|2900|1600|GYC1V151MC□1GS|
||220|10×10|0.12|77.00|20|3300|2000|GYC1V221MC□1GS|
||270|10×10|0.12|94.50|20|3300|2000|GYC1V271MC□1GS|
||330|10×12.5|0.12|115.50|16|3500|2300|GYC1V331MC□1GS|
||470|10×16.5|0.12|164.5|12|4800|2900|GYC1V471MN□1GS|
|50<br>（1H）|22|6.3×5.8|0.10|11.00|80|1100|750|GYC1H220MCQ1GS|
||33|6.3×7.7|0.10|16.50|40|1600|1100|GYC1H330MC□1GS|
||47|8×10|0.10|23.50|30|2200|1250|GYC1H470MC□1GS|
||68|8×10|0.10|34.00|30|2200|1250|GYC1H680MC□1GS|
||100|10×10|0.10|50.00|28|2600|1600|GYC1H101MC□1GS|
||120|10×10|0.10|60.00|28|2600|1600|GYC1H121MC□1GS|
||150|10×12.5|0.10|75.00|18|3200|2000|GYC1H151MC□1GS|
||220|10×16.5|0.10|110.0|14|4300|2600|GYC1H221MN□1GS|
|63<br>（1J）|10|6.3×5.8|0.08|6.30|120|1000|700|GYC1J100MCQ1GS|
||22|6.3×7.7|0.08|13.86|80|1300|900|GYC1J220MC□1GS|
||33|8×10|0.08|20.79|40|1900|1100|GYC1J330MC□1GS|
||47|8×10|0.08|29.61|40|1900|1100|GYC1J470MC□1GS|
||56|10×10|0.08|35.28|30|2300|1400|GYC1J560MC□1GS|
||68|10×10|0.08|42.84|30|2300|1400|GYC1J680MC□1GS|
||82|10×10|0.08|51.66|30|2300|1400|GYC1J820MC□1GS|
||100|10×12.5|0.08|63.00|20|3000|1900|GYC1J101MC□1GS|
||150|10×16.5|0.08|94.5|15|4200|2500|GYC1J151MN□1GS|
|80<br>（1K）|22|8×10|0.08|88.0|45|1600|1100|GYC1K220MC□1GS|
||33|10×10|0.08|132.0|36|1900|1300|GYC1K330MC□1GS|
||47|10×10|0.08|188.0|36|1900|1300|GYC1K470MC□1GS|
||56|10×12.5|0.08|224.0|24|2800|1800|GYC1K560MC□1GS|



**□** : Enter the appropriate configuration code. 

Blue : New product （as of October 2024） 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100N