GYA1E101MCQ1GS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

~~Ay~~ **NEW** 

Chip Type, 125°C High Reliability 

## **GYA** 

High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 125°C. Adapted to the RoHS directive (2011/65/EU). 

## Specifications 

|Item<br>~~CORs~~|Performance Characteristics<br>~~Rs~~|
|---|---|
|Category Temperature Range<br>~~CORs~~<br>~~Rs~~|–55 to +125°C<br>~~Rs~~<br>~~Rs~~|
|Rated Voltage Range<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|25 to 63V<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|
|Rated Capacitance Range<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|e<br>10 to 330µF<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|
|Capacitance Tolerance<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|± 20%   at 120Hz,20°C<br>~~Rs~~<br>~~Rs~~<br>~~Rs~~|
|Leakage Current<br>~~Rs~~<br>~~Rs~~|After 2 minutes' application of rated voltage at20°C, leakage current is not more than 0.01CV(µA).<br>~~Rs~~<br>~~Rs~~|
|Tangent of loss angle (tanδ)<br>~~Rsee~~|)<br>120Hz 20°C<br>Rated voltage(V)<br>tanδ(MAX.)<br>25<br>0.14<br>35<br>0.12<br>50<br>0.10<br>63<br>0.08<br>~~Rsee~~|
|ESR<br>~~ee~~<br>~~SS~~|Less than or equal to the specified value at 100kHz, 20°C<br>~~ee~~<br>~~SS~~|
|Endurance<br>~~SS~~|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after D.C. bias plus  rated<br>ripple current is applied for 4000 hours at 125°C, the peak<br>voltage shall not exceed the rated voltage.<br>Capacitance change<br>tanδ<br>Leakage current<br>ESR<br>Within ± 30% of initial capacitance value<br>200% or less of the initial specified value<br>200% or less of the initial specified value<br>Less than or equal to the initial specified value<br>~~SS~~|
|Shelf Life<br>~~SS~~|After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4<br>clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.<br>~~SS~~|
|Damp Heat<br>(Steady State)|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after the rated voltage is<br>applied for 1000 hours at 85°C, 85% RH.<br>Capacitance change<br>tanδ<br>Leakage current<br>Within±30%of the initial capacitance value<br>200% or less of the initial specified value<br>Less than or equal to the initial specified value|
|Resistance to<br>Soldering Heat<br>~~Rs~~|After solderling the Capacitor, After restored at room temperature,<br>they meet the characteristics requirements listed below.<br>Capacitance change<br>tanδ<br>Leakage current<br>Within±10%of the initial capacitance value<br>Less than or equal to the initial specified value<br>Less than or equal to the initial specified value<br>~~Rs~~|
|Marking<br>~~Rs~~|Black print on the case top.<br>~~Rs~~|



## Type numbering system  (Example : 35V 47µF) 

| Dimensions ic) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform Voltage (V:35V) Series 0.3 MAX. C±0.2 G Y A 1 V 4 7 0 M C Q 1 G S Taping code —_ | LT ILL | Size code Configuration S| Capacitance tolerance (±20%) Rated capacitance (47µF) LO roa — ee fe Rated voltage (35V) Lot No. Capacitance L±0.3 H Negative Series name 10L : ±0.5 Type (mm) r Specifications φD×L φ6.3 × 5.8 φ6.3 × 7.7 φ8 × 10 φ10 × 10 V 25 35 50 63 BA 7.36.6 7.36.6 9.08.3 10.311.0 _——————————— Cap. (µF) Code 1E 1V 1H 1J C 6.6 6.6 8.3 10.3 a 10 ee 100 eses 6.3 × 5.8 120 700 E 2.2 2.2 3.1 4.5 22 220 6.3 × 5.8 80 750 6.3 × 7.7 80 900 a ee L 5.8 7.7 10.3 10.3 a 33 ee 330 6.3 × 7.7 40 1100 8 × 10 40 1100 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 47 470 6.3 × 5.8 60 900 aeee Voltage 56 560 6.3 × 5.8 50 900 10 × 10 30 1400 V 25 35 50 63 68 680 6.3 × 7.7 35 1400 8 × 10 30 1250 Code E V H J a 100 101 aee 6.3 × 7.7 30 1400 10 × 10 28 1600 -+—}+—_+—} — **a** eea i 150 151 8 × 10 27 1600 a i es es a 220 221 ee 8 × 10 27 1600 ee 270 271 10 × 10 20 2000 φD×L ESR Ripple aee 330 ee 331 10 × 10 20 2000 mΩ mArms ESR:100kHz,20°C Rated ripple Current 100kHz,125°C