GXC1V331MCWADNGS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**NEW** 

## **GXC** Chip Type, 135°C High Reliability 

High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 135°C. 

**==> picture [181 x 61] intentionally omitted <==**

**----- Start of picture text -----**<br>
GXC<br>High<br>Ripple Current<br>— GYC | gy<br>**----- End of picture text -----**<br>


Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. **GXC** 

## Specifications 

Item Performance Characteristics Category Temperature Range –55 to +135°C Rated Voltage Range 25 to 63V Rated Capacitance Range 33 to 470µF Capacitance Tolerance ± 20%   at 120Hz, 20°C Rated voltage (V) 25 35 50 63 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.14 0.12 0.10 0.08 ~~See~~ ESR Less than or equal to the specified value at 100kHz, 20°C Leakage Current ※ ※ After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics Z(– 25°C) / Z(+20°C) 2 (100kHz) ~~a~~ (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 2.5 The specifications listed at right shall be met when the capacitors Capacitance change Within ± 30% of initial capacitance value Endurance are restored to 20°C after D.C. bias plus rated ripple current is tan δ 200% or less of the initial specified value applied for 4000 hours at 125°C or 135°C, the peak voltage shall ESR 200% or less of the initial specified value not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~EB~~ Shelf Life After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 ~~a~~ clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~| |~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Ctan Leakage currentapδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value Marking Black print on the case top. 

※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) 

Dimensions Positive Type numbering system  (Example : 35V 100µF) (φ8, φ10 )【Standard】 Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage (V:35V) Series 0.3 max. C±0.2 G X C 1 V 1 0 1 M C Q 1 G S Trade mark Taping code ~~-~~ Size code “I | ral LITLE) CJ Configuration Capacitance tolerance (±20%) Size Code Rated capacitance (100µF) Standard Q Rated voltage (35V) Vibration Resistance W Lot No. Capacitance L±0.5 H Negative Series name eli ic ~~e a~~ Type Positive (φ8, φ10 )【Vibration Resistance】 Voltage (E:25V) Series Plastic platform Voltage Standard (mm) Vibration Resistance (mm) Trade mark 0.3 max. C±0.2 V 25 35 50 63 φD×L 8 × 10 10 × 10 10 × 12.5 φD×L 8 × 10 10 × 10 10 × 12.5 Code E V H J A 9.0 11.0 11.0 A 9.0 11.0 11.0 2 ~~Sp~~ et ~~t~~ EEE B 8.3 10.3 10.3 B 8.3 10.3 10.3 C 8.3 10.3 10.3 C 8.3 10.3 10.3 E 3.1 4.5 4.5 E 3.1 4.5 4.5 L 10.3 10.3 12.5 L 10.5 10.5 12.8 ~~Co~~ Lot No. Capacitance L±0.5 ~~g~~ H Negative ~~“~~ H 0.8 to 1.1 0.8 to 1.1 == 0.8 to 1.1 H 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Aid electrode Frequency coefficient of rated ripple current Frequency 120Hz 1kHz 10kHz 100kHz or more ~~———~~ Coefficient 0.15 0.40 0.75 1.00 

Dimension table in next page. ~~fe~~ 

-— CAT.8100N 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GXC** 

## Dimensions 

**==> picture [512 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Ripple<br>Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（µA） ESR（mΩ）max.  （mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） 125℃/ 135℃/<br>100kHz 100kHz<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）|Rated Ripple<br>（mArms）|Part Number|
|---|---|---|---|---|---|---|---|---|
|||||||125℃/<br>100kHz|135℃/<br>100kHz||
||||||||||
|25<br>（1E）|150|8×10|0.14|37.5|18|4000|2800|GXC1E151MC□1GS|
||220|8×10|0.14|55.0|18|4000|2800|GXC1E221MC□1GS|
||270|10×10|0.14|67.5|16|4500|3300|GXC1E271MC□1GS|
||330|10×10|0.14|82.5|16|4500|3300|GXC1E331MC□1GS|
||470|10×12.5|0.14|117.5|14|5200|3600|GXC1E471MC□1GS|
|35<br>（1V）|100|8×10|0.12|35.0|18|4000|2800|GXC1V101MC□1GS|
||150|8×10|0.12|52.5|18|4000|2800|GXC1V151MC□1GS|
||220|10×10|0.12|77.0|16|4500|3300|GXC1V221MC□1GS|
||270|10×10|0.12|94.5|16|4500|3300|GXC1V271MC□1GS|
||330|10×12.5|0.12|115.5|15|5000|3500|GXC1V331MC□1GS|
|50<br>（1H）|47|8×10|0.10|23.5|24|3600|2500|GXC1H470MC□1GS|
||68|8×10|0.10|34.0|24|3600|2500|GXC1H680MC□1GS|
||100|10×10|0.10|50.0|20|4300|3000|GXC1H101MC□1GS|
||120|10×10|0.10|60.0|20|4300|3000|GXC1H121MC□1GS|
||150|10×12.5|0.10|75.0|17|4600|3300|GXC1H151MC□1GS|
|63<br>（1J）|33|8×10|0.08|20.8|27|3300|2300|GXC1J330MC□1GS|
||47|8×10|0.08|29.6|27|3300|2300|GXC1J470MC□1GS|
||56|10×10|0.08|35.3|22|4000|2800|GXC1J560MC□1GS|
||68|10×10|0.08|42.8|22|4000|2800|GXC1J680MC□1GS|
||82|10×10|0.08|51.7|22|4000|2800|GXC1J820MC□1GS|
||100|10×12.5|0.08|63.0|17|4600|3300|GXC1J101MC□1GS|



**□** : Enter the appropriate configuration code. 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100N