GWC1H151MCOADNGS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**GWC** Chip Type, 135°C High Reliability 

**==> picture [58 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
NEW<br>**----- End of picture text -----**<br>


High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 135°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. 

**==> picture [37 x 79] intentionally omitted <==**

**----- Start of picture text -----**<br>
GWC<br>High<br>Ripple<br>GXC<br>High<br>Ripple<br>GYC<br><><br>**----- End of picture text -----**<br>


Specifications Item Performance Characteristics Category Temperature Range –55 to +135°C Rated Voltage Range 25 to 63V ~~—_—_—_—=__—=&__~~ Rated Capacitance Range 47 to 560µF Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~ee~~ Rated voltage (V) 25 35 50 63 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.14 0.12 0.10 0.08 ~~SS~~ ESR Less than or equal to the specified value at 100kHz, 20°C ~~a~~ Leakage Current ※ ※ After 2 minutes' application of rated volta ~~ee~~ ge at 20°C, leakage current is not more than 0.01CV(µ ~~ee~~ A). Temperature Characteristics Z(– 25°C) / Z(+20°C) 2 ~~ee~~ (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 2.5 (100kHz) The specifications listed at right shall be met when the Capacitance change Within ± 30% of initial capacitance value Endurance capacitors are restored to 20°C after D.C. bias plus rated tan δ 200% or less of the initial specified value ripple current is applied for 4000 hours at 125°C or 135°C, ESR 200% or less of the initial specified value the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~a~~ Shelf Life After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 ~~i~~ clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~i~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Ctan Leakage currentapδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value ~~=~~ Marking Black print on the case top. ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Dimensions (φ8, φ10 )【Standard】 Positive Type numbering system  (Example : 35V 150µF) Trade markVoltage (J:63V) Series Plastic platform0.3 max. C±0.2 G1 W2 C3 14 V5 16 57 18 M9 10C O11 121 G13 S14 Taping code ~~-~~ lee AL ~~FO~~ Size code Configuration Capacitance tolerance (±20%) Size Code Rated capacitance (150µF) Standard φ8 to φ10 CO So Lot No. Capacitance Pressure relief vent(Only φ10×16.5L)L±0.5 ~~e~~ H Negative ~~tt~~ Rated voltageSeries name (Type35V) ResistanceVibration φφφ10×16.5L8 to 10×16.5Lφ10 NUCXNX Positive (Voltage (H:50V)φ8, φ10 )【Vibration ResistanceSeries Plastic platform】 StandardAφD×L 8 × 109.0 10 × 1011.0 10×12.511.0 10×16.511.0(mm) Vibration ResistanceAφD×L 8 × 109.0 10 × 1011.0 10×12.511.0 10×16.511.0(mm) Trade mark 0.3 max. C±0.2 B 8.3 10.3 10.3 10.3 B 8.3 10.3 10.3 10.3 ® oo C 8.3 10.3 10.3 10.3 C 8.3 10.3 10.3 10.3 E 3.1 4.5 4.5 4.5 E 3.1 4.5 4.5 4.5 L 10.3 10.3 12.5 16.5 L 10.5 10.5 12.8 16.8 H 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 1.1 to 1.5 H 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 ~~@~~ Lot No. Capacitance L±0.5 ~~e~~ e H Negative Voltage Frequency coefficient of rated ripple current ~~im~~ Pressure relief vent(Only φ10×16.5L) Aid electrode ~~See~~ V 25 35 50 63 Frequency 120Hz 1kHz 10kHz 100kHz or more ~~=~~ FAPPqs Code E V H J ~~==}~~ Coefficient 0.15 0.40 0.75 1.00 ~~~~~ Dimension table in next page. ~~le~~ —— CAT.8100O 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GWC** 

Dimensions 

**==> picture [511 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Ripple<br>Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（µA） ESR（mΩ）max.  （mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） 125℃/ 135℃/<br>100kHz 100kHz<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）|Rated Ripple<br>（mArms）|Part Number|
|---|---|---|---|---|---|---|---|---|
|||||||125℃/<br>100kHz|135℃/<br>100kHz||
||||||||||
|25<br>（1E）|220|8×10|0.14|55.0|18|4300|3000|GWC1E221MC□1GS|
||330|10×10|0.14|82.5|16|5000|3500|GWC1E331MC□1GS|
||470|10×12.5|0.14|117.5|14|5300|3700|GWC1E471MC□1GS|
||560|10×16.5|0.14|140.0|10|6100|4300|GWC1E561MN□1GS|
|35<br>（1V）|150|8×10|0.12|52.5|18|4300|3000|GWC1V151MC□1GS|
||270|10×10|0.12|94.5|16|5000|3500|GWC1V271MC□1GS|
||330|10×12.5|0.12|115.5|15|5300|3600|GWC1V331MC□1GS|
||470|10×16.5|0.12|164.5|11|5800|4100|GWC1V471MN□1GS|
|50<br>（1H）|68|8×10|0.10|34.0|24|4000|2700|GWC1H680MC□1GS|
||120|10×10|0.10|60.0|20|4700|3000|GWC1H121MC□1GS|
||150|10×12.5|0.10|75.0|17|5000|3300|GWC1H151MC□1GS|
||220|10×16.5|0.10|110.0|13|5500|3800|GWC1H221MN□1GS|
|63<br>（1J）|47|8×10|0.08|29.6|27|3700|2300|GWC1J470MC□1GS|
||82|10×10|0.08|51.7|22|4400|2800|GWC1J820MC□1GS|
||100|10×12.5|0.08|63.0|17|5000|3300|GWC1J101MC□1GS|
||150|10×16.5|0.08|94.5|13|5500|3800|GWC1J151MN□1GS|



**□** : Enter the appropriate configuration code. 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100O