GW.26.0152

## **SPECIFICATION** 

Part No. : **GW26.0152** 

- Product Name  :[2.4GHz Miniature Terminal Mount Monopole ] 

Antenna 

- Feature :[RP-SMA(M) ] 

Fixed 90 28.3 * 17.2mm ROHS Compliant 

Page 1 of 13 

SPE-11-8-004/I/SS 

## **1 Introduction** 

The GW.26 2.4GHz Monopole RP-SMA(M) terminal mount antenna is ideal for 2.4GHz wireless applications such as Bluetooth and Wireless LAN. Connector mount is fully customizable. 

Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance. 

Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module. 

For example, a module manufacturer may state that the antenna must have less than 2dBi peak gain, but you don’t need to select an embedded antenna that has a peak gain of less than 2dBi in free-space. This will give you a less optimized solution. It is better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your device, performance will degrade below this 2dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits. 

Page 2 of 13 

SPE-11-8-004/I/SS 

## **2 Specification** 

|Wi-Fi 2.4GHz<br>~~ii~~|Wi-Fi 2.4GHz<br>~~ii~~|
|---|---|
|Frequency<br>~~ii~~|2400~2500MHz|
|Bandwidth|100MHz|
|Peak Gain|1.8dBi|
|Radiation Efficiency|> 40%|
|Radiation|Omni-directional|
|Polarization|Vertical|
|Power Handling 1W Max|Power Handling 1W Max|
|Electrical Wave|Monopole|
|Impedance|50Ω|
|Operating Temperature|-40°C ~ +85°C|
|Storage Temperature|-40°C ~ +85°C|



## **3 Mechanical Properties** 

|Mechanical Properties<br>~~I~~|Mechanical Properties<br>~~I~~|
|---|---|
|Colour|Black and Green|
|Connector|RP-SMA(M)R/A|
|IP rating|IP-65|



Page 3 of 13 

SPE-11-8-004/I/SS 

## **4 Antenna Characteristics** 

## **4.1 Antenna S11** 

Page 4 of 13 

SPE-11-8-004/I/SS 

## **4.2 Antenna Peak Gain** 

**==> picture [489 x 287] intentionally omitted <==**

**----- Start of picture text -----**<br>
3<br>Peak Gain (dBi)<br>2<br>ert {ttt ttt tT ttt te ——<br>1<br>CLLISINN EEE<br>0 Ley<br>-1<br>LTE TET ETTTTT ETPSeeEEPNET<br>-2<br>LET TTT TE<br>LETT<br>-3<br>-4<br>TELE TE T TTTET TT Ey<br>2350 2360 2370 2380 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 2510 2520 2530 2540 2550<br>Freq(MHz)<br>Peak Gain(dBi)<br>**----- End of picture text -----**<br>


Page 5 of 13 

SPE-11-8-004/I/SS 

## **4.3 Antenna Efficiency** 

**==> picture [482 x 264] intentionally omitted <==**

**----- Start of picture text -----**<br>
60<br>Efficiency (%)<br>50<br>LETTOSS TT fee<br>40<br>TELL NL<br>30<br>20<br>STEEL TT EET TTT EE TE Pe<br>10<br>STEEL TTT TT ETT<br>0<br>TELL TT TE TT TTETTEET TE<br>2350 2360 2370 2380 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 2510 2520 2530 2540 2550<br>Freq(MHz)<br>Efficiency(%)<br>**----- End of picture text -----**<br>


Page 6 of 13 

SPE-11-8-004/I/SS 

## **4.4 Antenna pattern (XY plane)** 

**==> picture [129 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Y<br>Z<br>X<br>**----- End of picture text -----**<br>


Page 7 of 13 

SPE-11-8-004/I/SS 

## **4.5 Antenna pattern (XY plane)** 

**==> picture [444 x 357] intentionally omitted <==**

**----- Start of picture text -----**<br>
0<br>5<br>330 0 30<br>Saeunny<br>-5<br>S eed<br>-10<br>S SS R<br>-15<br>300 60<br>OT TE -20 R<br>ABS Ty.ORO<br>-25<br>-30<br>FARESS\ -35 WEEN<br>270 -40 90<br>= Beeee |  caase oo 2400MHz<br>1. Sa | CSS |<br>2420MHz<br>2440MHz<br>240 120 2460MHz<br>2480MHz<br>IMSS ad<br>2500MHz<br>SA H  w ha<br>210 150<br>aa a<br>aaatttasoe<br>**----- End of picture text -----**<br>


180 

Page 8 of 13 

SPE-11-8-004/I/SS 

**==> picture [476 x 387] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.6 Antenna pattern (XZ plane)<br>0<br>0<br>330 -5 30<br>-10<br>P ES<br>-15<br>300 4EON -20 60<br>-25<br>-30<br>FESS:<br>-35<br>270 -40 90<br>eeSee= Se ae<br>2400MHz<br>i) =ecy/| \S =e |<br>2420MHz<br>2440MHz<br>240 120 2460MHz<br>SSSI SES 2480MHz<br>2500MHz<br>I 210 150<br>Te<br>**----- End of picture text -----**<br>


**==> picture [19 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
180<br>**----- End of picture text -----**<br>


Page 9 of 13 

SPE-11-8-004/I/SS 

## **4.7 Antenna pattern (YZ plane)** 

**==> picture [7 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
0<br>**----- End of picture text -----**<br>


**==> picture [486 x 403] intentionally omitted <==**

**----- Start of picture text -----**<br>
0<br>eS<br>330 -5 30<br>-10<br>STIR.<br>-15<br>OST TAO<br>300 -20 60<br>SSH<br>-25<br>RSQ<br>TAR RQW -30 EES<br>SSS -35 aa<br>0 -40 90<br>. Se  SS |<br>2400MHz<br>2420MHz<br>SF SO MINNIONOO 2440MHz<br>240 | 120 2460MHz<br>TTS<br>2480MHz<br>Sain [ae] el<br>2500MHz<br>210 150<br>S r<br>180<br>**----- End of picture text -----**<br>


Page 10 of 13 

SPE-11-8-004/I/SS 

## **5. Outline Drawings and Structure** 

## Key 

|Keyey|||
|---|---|---|
|1|Antenna Cover|TPU(Black)|
|2|Connector|RP-SMA(M)|
|3|Colour Stripes|Apple Green|



Page 11 of 13 

SPE-11-8-004/I/SS 

## **6. Packaging** 

SPE-11-8-004/I/SS Page 12 of 13 

Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. 

Taoglas reserves the rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. 

- © Taoglas 

Page 13 of 13 

SPE-11-8-004/I/SS