GP330SCHHB

_**Data Sheet**_ 

## _**Model No.:  GP330SCH**_ 

**==> picture [515 x 591] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type : Rechargeable Nickel Metal Hydride<br>Cylindrical Cell Fast Charge (Charge Control required)<br>Nominal Dimension : ∅ = 23.0mm                             Voltage (V)<br>(with Sleeve) H = 44.5mm  1.6<br>Application : Discharge current  1.5 3300 mA (1C)<br>330mA to 30A (Continuous)<br>58A (Momentary) 1.4 1650 mA<br>Nominal Voltage : 1.2V 1.3 (0.5C)<br>Nominal Capacity : Minimun : 3300mAh<br>Typical : 3465mAh 1.2<br>when discharged at 660mA to 1.0V at 20 [o] C 1.1<br>Charging Condition : 330mA for 16 hrs at 20 [o] C<br>1.0<br>Fast Charge : 1650mA to 3300mA (0.5C to 1C) with 0 20 40 60 80 100 120 140<br>charge termination control. Capacity Input  (%)<br>Recommended control parameter :<br>-∆V : 0-5mV Low Rate Discharge<br>dT/dt : 0.8 [o] C/min (0.5C to 0.9C) Voltage (V)<br>0.8-1 [o] C/min (1C) 1.5<br>TCO : 40-45 [o] C 1.4<br>Charge : 330 mA x 16 hrs at 20 [1] C<br>1.3<br>Timer : 105% nominal input<br>(Secondary) 1.2<br>Service Life : > 500 cycles (IEC standard) 1.1<br>Continuous : 330mA maximum current<br>1<br>Overcharge No conspicuous deformation and/orleakage 0.9 3,300mA 1,650mA 660mA<br>  (1C)  (0.5C) (0.2C)<br>Weight : 62.0g 0.8<br>Internal Resistance : Average 5mΩ upon fully charged 0 1 2 3 4 5 6<br>(Range : 3-6mΩ) at 1000Hz Discharge Time (Hrs)<br>Max. Charging : 1.5V at 330mA charging<br>Voltage High Rate Discharge<br>Voltage (V)<br>Ambient Temperature : Standard Charging : 0 [o] C to 40 [o] C 1.5<br>Range Fast Charging : 10 [o] C to 40 [o] C<br>Discharging :  -20 [o] C to 50 [o] C 1.4 Charge : 330 mA x 16 hrs at 20 [1] C<br>Storage : -20 [o] C to 35 [o] C<br>1.3<br>Storage (1 week) :  -20 [o] C to 60 [o] C<br>1.2<br>1.1<br>1<br>φ  10.0 (Ref.)  30A 16.5A  9.9A   6.6A<br>0.9<br>(10C) (5C) (3C)   (2C)<br>0.8<br>0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32<br>Discharge Time (Mins)<br>* The information (subject to change without<br>prior notice) contained in this document is for<br>reference only and should not be used as a basis<br>for product guarantee or warranty.  For<br>application other than those described here,<br>unit : mm please consult GP Sales and Marketing Office or r=<br>Distributors.<br>+ 0  - 1.0<br> 23.0mm<br>φ<br>+ 0 - 1.5<br>44.5mm<br>**----- End of picture text -----**<br>


_Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. PBR043-01 Rev.00_