GNRD06CDL

**|** 06/2022 

## › **GNRD-0 Series** 

## **Motor Reversing Solid State Relays** DIN Rail Mount 

- › **For frequent start/stop/reversing operation of DC Motors** 

- › **Output Current of 6 Amps** 

- › **Output Voltage of 7-36 V** c 

- › **Control Voltage of 7-30 V** c 

- › **DC Switching** 

- › **CE and UKCA Recognized** 

**==> picture [444 x 259] intentionally omitted <==**

**----- Start of picture text -----**<br>
GNRD-0<br>Product Selection - DC Switching (DC Loads)<br>Rated Load Current 6A<br>Output Voltage 7-36 V c<br>Control Voltage<br>7-30 V c GNRD06CDL<br>Part Number System<br>GNRD-0<br>Series Control Voltage Output Voltage<br>GNRD0:  GNRD0 Series C:  7-30 V c L:  7-36 V c<br>GNRD0 6 C D L<br>Output Current Switching Type<br>6:  6 A D:  DC Switching<br>**----- End of picture text -----**<br>


Do you need an adapted or customized solution? Contact us on **www.crouzet.com** 

## **Description:** 

Crouzet Solid State Relays are designed to be used in almost any application, offering very long life expectancy and are easy to install, easy to use, robust and multipurpose. For more information about Crouzet’s Solid State relays, please visit **www.crouzet.com** . 

**|** WWW.CROUZET.COM 

**| 2** 

**|** GNRD-0 Series 

**|** 06/2022 

## **Output Characteristics[(1)]** 

|**Description**|6A|
|---|---|
|Maximum Load Current @ Ta=30 °C [Arms]|6|
|Minimum Load Current [mArms]|0.1|
|Maximum 1 Cycle Surge Current [Apeak]|60A @100 ms|
|Maximum On-State Voltage Drop @ Rated Current [Vpeak]|0.4|
|Thermal Resistance Junction to Case (Rjc) [°C/W]|1.36|
|Minimum Heat Sink for Rated Current @ 40 °C [°C/W]|No heatsink|
|Operating Voltage [Vrms]|7-36 Vc|
|Transient Voltage [Vpeak](2)|60|
|Maximum Of-State Leakage Current @ Rated Voltage [mArms]|0.2|
|Minimum Power Factor|0.45|



## **Input Characteristics[(1)]** 

|Control Voltage Range|7-30 Vc|
|---|---|
|Maximum Reverse Voltage|-30 Vc|
|Minimum Turn-On Voltage|7 Vc|
|Must Turn-Of Voltage|1 Vc|
|Minimum Input Current (for on-state) [mA]|12|
|Maximum Input Current [mA]|58|
|Nominal Input Impedance [Ohms]|1000|
|Maximum Turn-On Time [msec]|0.01|
|Maximum Turn-Of Time [msec]|0.15|



## **General Characteristics** 

|**Description**|6A|
|---|---|
|Dielectric Strength, Input to Output (50/60 Hz) [V]|2500|
|Dielectric Strength, Input/Output to Ground (50/60 Hz) [V]|2500|
|Minimum Insulation Resistance (@ 500 Vc) [Ohms]|109|
|Maximum Capacitance, Input/Output [pF]|8|
|Ambient Operating Temperature Range [°C](7)|-40 to 80|
|Ambient Storage Temperature Range [°C]|-40 to 100|
|Weight (typical) [g]|110|
|Housing Material|UL94 V-0|
|Input Terminal Screw Torque Range [in-lb/Nm]|3-5 / 0.4-0.5|
|Load Terminal Screw Torque Range [in-lb/Nm]|3-5 / 0.4-0.5|
|Humidity per IEC60068-2-78 [%]|40-85|
|LED Input Status Indicator|Green|
|MTBF (Mean Time Between Failures) at 40 °C ambient temperature [years](8)|15|
|MTBF (Mean Time Between Failures) at 60 °C ambient temperature [years](8)|10|
|MTTFd [years]|34|



## **General Notes** 

(1) All parameters at 25 °C unless otherwise specified (2)Output will self trigger between 450-600 Vpk not suitable for capacitive loads (7)AC models operating range is -20 to 80 °C (8)All parameters at 50 % power rating and 100 % duty cycle (contact tech support for detailed report) 

**|** WWW.CROUZET.COM 

**| 3** 

**|** GNRD-0 Series 

**|** 06/2022 

## **Diagrams** 

## **Wiring** 

**==> picture [486 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
GNRD-0   Recommended Wire Size<br>5 7 L_cthe CFR =|{hs ++ - hep pL] , TERMINALSInput 12 AWG (4 mm²) SOLID WIRE SIZE 14 AWG (2.5 mm²) STRANDED 0.4 - 0.5 Terminal Screw Torque (N.m)<br>Control F+ ON Output 12 AWG (4 mm²) 14 AWG (2.5 mm²) 0.4 - 0.5<br>M T1 ie ] ——_—————T oF" L1+<br>DC<br>On m'i|: T2 | le l] L2 - =<br>Control R R+ + O ON N —_—_—_—_—_—_—_J<br>Control« lc __ ale<br>Warning : the F+ and R+ switches must never be activated at the same time, an interlock prohibiting the control of both directions of rotation and a time delay at the moment<br>of inversion of control must be provided.<br>+<br>+<br>**----- End of picture text -----**<br>


## **Diagrams Equivalent Circuit Block** 

**GNRD-0** , Series 7-30 V c control, 7-36 V c output; DC Switching (DC Loads) 

Input Current vs Input Voltage Standard Regulated DC inputs 

**==> picture [468 x 230] intentionally omitted <==**

**----- Start of picture text -----**<br>
14<br>F+ - 21, - L1+ 12<br>FORWARD<br>INPUT 10<br>L2-<br>8<br>6<br>T1 4<br>R+ oOCO Ln CoS) T2 2<br>REVERSE 0<br>INPUT 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30<br>iy<br>; Input Voltage (V)<br>S \<br>COMMON<br>C-<br>OUTPUT VOLTAGE<br>Input Current (mA)<br>MOTOR<br>**----- End of picture text -----**<br>


**|** WWW.CROUZET.COM 

**| 4** 

**|** GNRD-0 Series 

**|** 06/2022 

**==> picture [493 x 565] intentionally omitted <==**

**----- Start of picture text -----**<br>
Diagrams<br>——————————— Dimensions (mm)<br>GNRD-0<br>76,2<br>CY Ly<br>58,12  ± 1 77,99<br>7 —<br>i)<br>Curves<br>Thermal Derating Curves<br>GNRD-0<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>0<br>0 10 20 30 40 50 60 70 80 90<br>Ambient Temperature (°C)<br>Standards & Electromagnetic Compatibility Specfification<br>EN61000-4-4 Immunity to fast transients / bursts<br>EN61000-4-5 Immunity to surges<br>Current (A)<br>1<br> ±<br>1<br> ± 54,38<br>32,28<br>**----- End of picture text -----**<br>


Standards 

## **Warning:** 

The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of contractual commitment. Crouzet and its subsidiaries reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use or application of our products and it is the responsibility of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition, deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not been expressly agreed by us prior to the sale of our products.