GB20S24K01

20W Single Output **GB20 Family** Medical & Industrial Grade 

## **FEATURES AND BENEFITS** 

Approved to CSA/EN/IEC/UL60601-1, 3[rd] Edition E-cap Life of >7 Years 

20W Open Frame and PCB-mount Power Supply 1.6” x 3.38” x 1.0” Package od Universal Input 90-264VAC 

Medical 

>1,000,000 Hours MTBF 

<0.1W No Load Input Power 3 Year Warranty 

|<0.1W No Load Input Power<br>3 Year Warranty<br>Industrial|
|---|
|Approved to CSA/EN/IEC/UL62368-1<br>Meets Class B Radiated & Conducted EMI, with<br>Margin<br>Meets Heavy iIndustrial and IEC60601-1-2<br>4thEdition Levels of EMC<br>Model Number2<br>GB20S07K01<br>GB20S09K01<br>GB20S05K01<br>GB20S12K01<br>GB20S15K01<br>GB20S24K01<br>GB20S48K01<br>Input<br>Class/Termination<br>Class I (Grounded) input,<br>3-pin AMP/Molex type<br>connector<br>Change “K” to “C” for<br>class II input<br>Change “K” to “P” for PCB<br>mount pins, class I input<br>Change “K” to “V” for PCB<br>mount pins”, class II input<br>PCB mount pins for<br>“P” and “V” versions<br>4-pin AMP/Molex type<br>connector for “K” and “C”<br>versions<br>Output<br>Termination<br>Volts<br>7.5V<br>9.0V<br>5.0V<br>15.0V<br>12.0V<br>24.0V<br>48.0V<br>Rated<br>Current<br>2.0A<br>2.0A<br>3.0A<br>1.2A<br>1.5A<br>0.8A<br>0.4A<br>Ripple &<br>Noise1<br>90mV pk-pk<br>120mV pk-pk<br>75mV pk-pk<br>75mV pk-pk<br>120mV pk-pk<br>240mV pk-pk<br>480mV pk-pk<br>Line<br>Regulation<br>±1%<br>±1%<br>±1%<br>±1%<br>±1%<br>±1%<br>±1%<br>Load<br>Regulation<br>±5%<br>±5%<br>±5%<br>±5%<br>±5%<br>±5%<br>±5%<br>Output<br>Power<br>15W<br>18W<br>15W<br>18W<br>18W<br>20W<br>20W<br>Note:1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.<br>Note:*Consult Factory for compliance information.<br>**MODEL SELECTION**<br>~~nn~~<br>® WCE<br>wus~~——~~|
|2. Other output voltages available, consult factory.|
|3. All specifications are typical at 230VAC, full load, at 25°C ambient unless noted.|
|Output Power<br>15W-20W continuous – See models chart for specific<br>voltage model ratings<br>Hold-Up Time<br>20ms/100VAC at full load<br>Turn On Time<br><700ms<br>100-240VAC, ±10%, 47-63Hz, 1Ø<br>Input Current<br>115VAC: 0.5A, 230VAC: 0.2A<br>Inrush Current<br>264VAC, cold start: will not exceed 40A peak<br>Input Voltage and<br>Frequency<br>**OUTPUT**<br>**INPUT**<br>X<br>X|
|Output Voltage<br>See models chart<br>Input Fuses<br>3.15A, 250VAC fuse in both line and neutral|
|Transient Response<br>500μs resp.time for return to w/in 0.5% of final<br>value for any 50% load step from 5% to 100% of<br>rated load, ∆i/∆t<0.2A/μs<br>Max voltage deviation is +/-3.5%<br>Regulation<br>See models chart<br>Note: All specifications are typical at 230VAC input, full load, at 25°C ambient unless noted.<br>Efficiency<br>>88%, typical<br>Earth Leakage Current<br>(Input to Ground)<br><500μA@264VAC, 60Hz, NC<br><1mA@264VAC, 60Hz, SFC<br>Earth Leakage Current<br>(Output to Ground)<br><100μA@264VAC, 60Hz, NC<br><500μA@264VAC, 60Hz, SFC<br>Power Factor<br>0.9, min., 230VAC, 80-100% load vector, 25°C<br>ambient|



Note: All specifications are typical at 230VAC input, full load, at 25°C ambient unless noted. 

Page 1 

GB20 Datasheet v0 721 

Copyright © 20 21 SL Power Electronics Corp. All rights reserved. 

20W Single Output20W Single Output **GB20 FamilyGB20 Family Medical & Industrial Grade** 

**==> picture [592 x 703] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|PROTECTION|SAFETY|
|Overtemperature|Will shutdown upon an overtemperature condition,|ITE/Industrial Safety|EN/IEC/UL62368-1|
|Protection|Auto-recovery|
|Medical Safety|EN/IEC/UL60601-1, 3|[rd]|edition|
|130% to 160% of rated output current value,|
|Overload Protection|
|Hiccup mode|
|Short Circuit Protection|Hiccup mode|
|EMI/EMC COMPLIANCE|
|120% to 150% of nominal output voltage,|
|Overvoltage Protection|
|Hiccup Mode|EN55032, EN55011/CISPR11 Class B, FCC Part|
|ae|Conducted Emissions|‘|
|15.107, Class B: 6db margin type, at 115 and 230VAC|
|EN55032, EN55011/CISPR11 Class B, FCC Part|
|RELIABILITY|Radiated Emissions|15.109, Class B: 3db margin type, at 115 and 230VAC|
|Electro-Static Discharge|EN55024/IEC61000-4-2, Level 4: +/- 8kV contact,|
|>1,000,000 hours, full load, 110 & 220VAC input,|
|MTBF|(ESD) Immunity on|+/- 15kV air, Criteria A|
|25°C amb., per telcordia 332 issue 6, stress method|
|Power Ports|IEC60601-1-2, 4|[th]|edition, Table 4|
|>7 year life based on calculations at 115VAC/60Hz|
|EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz,|
|E-cap Life|& 230VAC/50Hz, ambient 25°C at 24 hrs per day,|Radiated RF EM Fields|
|80% AM at 1kHz|
|365 days/year, 6 power up cycles per day|Susceptibility|
|—|IEC60601-1-2, 4|[th]|edition, Table 4|
|EN55024/IEC61000-4-4, Level 4, +/- 4.4kV,|
|Electrical Fast|
|100Khz rep rate, 40A, Criteria A|
|ISOLATION SPECIFICATIONS|Transients (EFT)/Bursts|
|IEC60601-1-2, 4|[th]|edition, Table 5|
|Input-Output|: 4000VAC (2 MOPP)|Surges, Line to Line|EN55024/IEC61000-4-5, Level 4, +/-2kV DM,|
|Isolation|Input-Ground|: 1500VAC (1 MOPP)|(Diff Mode) and Line to|+/-4kV CM, Criteria A|
|GND (CMN Mode)|Surpasses IEC60601-1-2, 4|[th]|edition requirements|
|Output-Ground|: 1500VAC (1 MOPP)|
|Isolation Resistance|I/P-O/P, I/P-FG, O/P-FG: TBD|EN55022/IEC61000-4-6, 3.6V/m – Level 4, (0.15 to|
|_|Conducted Disturbances|80Mhz; and 12V/m) in ISM and amateur radio bands|
|Induced by RF Fields|between 0.15Mhz and 80Mhz, 80% AM at 1KHz|
|IEC60601-1-2, 4|[th]|edition, Table 5|
|ENVIRONMENT|
|Rated Power Frequency|EN55024/IEC1000-4-8,  Level 4: 30 A/m, 50/60Hz|
|Magnetic Fields|IEC60601-1-2, 4|[th]|edition, Table 4|
|-25 ~ +70°C, see derating curve for operation above|
|Operating Temperature|
|40°C|EN55024/IECEN61000-4-11:|
|--100% dip for 10 ms, at 0, 45, 90, 135, 180, 225,|
|StorageTemperature|-40°C ~ +85°C|
|270 and 315 degrees, 100% dip for 20ms, 0 deg.,|
|Cooling|Convection|Voltage Interruptions,|Criteria A|
|Dips, Sags & Surges|--100% dip for 5000ms (250/300 cycles), Criteria B|
|Relative Humidity|5% to 90%, Non-condensing|--60% dip for 100ms, Criteria B|
|--30% dip for 500ms, Criteria A|
|Operating: 0.003g/Hz, 1.5grms overall, 3 axes,|IEC60601-1-2, 4|[th]|edition, Table 5|
|10 min/axis, 1-500Hz|
|Harmonic Current|
|Non-Oper.: random waveform, 3 minutes per axis, 3|EN55011/EN61000-3-2, Class A|
|Vibration|Emissions|
|axes and sine waveform, Vib. frequency/acceleration:|
|10-500Hz/1g, sweep rate of 1 octave/minutes,|Flicker Test|EN61000-3-3|
|vibration time of 10 sweeps/axes, 3 axes|
|Note:|1. The power supply is considered a component which will be installed into a final equipment.|
|Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 shocks|The final equipment must be re-confirmed that it still meets EMC directives.|
|total|2. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Consult|
|Shock|Non-Operating: Half-sine waveform, impact|factory for information regarding testing for or usage under special environments.|
|acceleration of 50G, pulse duration of 6ms,|
|Number of shocks: 3 for each of the three axis|
|41 x 86 x 25mm|
|Dimensions|
|1.6 x 3.38 x 1.0 inch|
|Weight|120g|
|_|
|Note:|Same dimensions for PCB & Pin Variants.|
|GB20|Datasheet v0|721|Copyright © 20|21|SL Power Electronics Corp. All rights reserved.|Page 2|

**----- End of picture text -----**<br>


20W Single Output20W Single Output **Medical & Industrial Grade** 

**GB20 FamilyGB20 Family** 

## **DERATING CURVE** 

**==> picture [440 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
25<br>20 vw<br> 5V<br>15 :<br>12V-18V<br>10  24V<br> 48V<br>5<br>0 R<br>-20 -10 0 10 20 30 40 50 60 70<br>Ambient Temperature (°C)<br>Watts<br>**----- End of picture text -----**<br>


## **MECHANICAL DRAWING** 

Page 3 

GB20 Datasheet v0 721 

Copyright © 20 21 SL Power Electronics Corp. All rights reserved. 

20W Single Output20W Single Output **Medical & Industrial Grade** 

**GB20 FamilyGB20 Family** 

## **CONNECTOR AND TERMINATION INFORMATION** 

|Version<br>Connector Pinout<br>Ground<br>Connector Type/Part No.<br>Input Connections|Connector Pinout<br>Connector Type/Part No.<br>Output Connections|
|---|---|
|Open Frame:<br>“K”, “C”<br>Pin 1: AC LINE<br>Pin 2: N/C<br>Pin 3: GROUND<br>Pin 4: N/C<br>Pin 5: AC NEUTRAL<br>Connector:<br>TE/AMP P/N 640445-5<br>Mating Connector: TE/<br>AMP P/N 640250-5<br>Pins= 770476-1|Pin 1: +Vout<br>Pin 2: +Vout<br>Pin 3: -Vout<br>Pin 4: -Vout<br>Connector:<br>TE/AMP P/N 640445-4<br>Mating Connector:<br>TE/AMP P/N 640250-4,<br>Pins= 770476-1|
|PCB Mount:<br>“P”, “V”<br>Pin 1: AC Line<br>Pin 2: AC Neutral<br>PG: AC Ground<br>(N/A on “V”<br>version)<br>Pencom PI3207 or equivalent|Pin 4: +Vout<br>Pin 5: +Vout<br>Pin 6: -Vout<br>Pin 7: -Vout<br>Pencom PI3207 or equivalent|



Disclaimer : The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 

Page 4 

GB20 Datasheet v 0721 

Copyright © 20 21 SL Power Electronics Corp. All rights reserved.