GB10S15K01

12W Single Output Medical/Industrial Grade 

**GB10 Family** 

## **FEATURES AND BENEFITS** 

**==> picture [21 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Medical<br>**----- End of picture text -----**<br>


**==> picture [23 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Industrial<br>**----- End of picture text -----**<br>


12W Open Frame Power Supply 1.6” x 3.38” x 1.0” (40.6mm x 85.8mm x 25.4mm) Universal Input 90VAC–264VAC 

<0.1W No Load Input Power 

Approved to CSA/EN/IEC/UL62368-1 ~~es~~ 

E-cap Life of >10 Years >1,000,000 Hours MTBF 3 Year Warranty Meets Class B Radiated & Conducted EMI, with Margin Meets Heavy Industrial and IEC60601-1-2 4[th] Edition Levels of EMC 

Approved to CSA/EN/IEC/UL60601-1 3[rd] Edition 

## Notes: 

1. *Consult factory for compliance information. 

## **MODEL SELECTION** 

|Model<br>Number2|Volts<br>~~P|~~|Rated<br>Current<br>~~P|~~|Output<br>Power<br>~~P|~~<br>~~|~~|Ripple &<br>Noise1<br>~~||}~~|Line<br>Regulation<br>~~|}~~|Load<br>Regulation<br>~~|}~~|Input<br>Class/Termination|Output<br>Termination|
|---|---|---|---|---|---|---|---|---|
|GB10S05K01|5.0V<br>~~P|~~|2.0A<br>~~P|~~|10.0W<br>~~P|~~<br>~~|~~|75mV<br>pk-pk<br>~~| |}~~|±1%<br>~~|}~~|±5%<br>~~|}~~|Class I (Grounded)<br>input,  3-pin AMP/<br>Molex type  connector<br>Change “K” to “C” for<br>Class II input|4-pin AMP/Molex type<br>connector for “K” and<br>“C”  versions|
|GB10S07K01|7.5V|1.3A|10.0W|75mV<br>pk-pk|±1%|±5%|||
|GB10S09K01|9.0V|1.0A|10.0W|90mV<br>pk-pk|±1%|±5%|||
|GB10S12K01|12.0V|1.0A|12.0W|120mV<br>pk-pk|±1%|±5%|||
|GB10S15K01|15.0V|0.8A|12.0W|150mV<br>pk-pk|±1%|±5%|||
|GB10S24K01|24.0V|0.5A|12.0W|240mV<br>pk-pk|±1%|±5%|||



## Notes: 

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor. 

2. Other output voltages available, consult factory. 

3. All specifications are typical at 230VAC, full load, at 25°C ambient unless noted. 

GB10 Datasheet v0719 

Copyright © 2019 SL Power Electronics Corp. All rights reserved. 

Page 1 

12W Single Output Medical/Industrial Grade 

**GB10 Family** 

## **INPUT** X 

|Input Voltage and<br>Frequency|100VAC–240VAC, ±10%, 47Hz–63Hz, 1Ø|
|---|---|
|Input Current|115VAC: 0.45A, 230VAC: 0.22A|
|Inrush Current|264VAC, cold start: will not exceed 40A peak|
|Input Fuses|3.15A, 250VAC fuse in both line and neutral|
|Earth Leakage Current<br>(Input to Earth)|<500μA@264VAC, 60Hz, NC<br><1mA@264VAC, 60Hz, SFC|
|Earth Leakage Current<br>(Output to Earth)|<100μA@264VAC, 60Hz, NC<br><500μA@264VAC, 60Hz, SFC|
|Efficiency|>88%, typical|



## Notes: 

1. All specifications are typical at 230VAC input, full load, at 25°C ambient unless noted. 

## **OUTPUT** 

Output Voltage See models chart 10W–12W continuous - See models chart for Output Power specific voltage model ratings Turn On Time <800mS 20mS/100VAC at full load, “K” and ”C” input options Hold-up Time 10mS/100VAC at full load, “P” input options 500μs resp. time for return to w/in 0.5% of final value for any 50% load step from 5% to 100% of Transient Response rated load, Δi/Δt<0.2A/μs Max voltage deviation is ±3.5% Total Load Regulation See models chart 0.9min., 230VAC, 80%–100% load vector, 25°C Power Factor ambient 

## Notes: 

1. All specifications are typical at 230VAC input, full load, at 25°C ambient unless noted. 

## **ISOLATION** 

Input-Output: 4000VAC (2 MOPP) **RELIABILITY** Isolation Input-Ground: 1500VAC (1 MOPP) Output-Ground: 1500VAC (1 MOPP) >1,000,000 hours, full load, 110VAC & 220VAC input, MTBF Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: TBD 25°C amb., per telcordia 332 issue 6, stress method ~~pp ‘~~ >10 year life based on calculations at 115VAC/60Hz E-cap Life & 230VAC/50Hz, ambient 25°C at 24 hrs/day, 365 days/year, 6 power up cycles/day **PROTECTION** ~~. a~~ Will shutdown upon an overtemperature Overtemperature Protection condition, Auto-recoveryy **SAFETY** 130% to 160% of rated output current value, Overload Protection Hiccup modep mode mode ITE/Industrial Safety EN/IEC/UL62368-1 Short Circuit Protection Hiccup mode Medical Safety EN/IEC/UL60601-1 3[rd] Edition ~~ee~~ 

Will shutdown upon an overtemperature Overtemperature Protection condition, Auto-recoveryy 130% to 160% of rated output current value, Overload Protection Hiccup modep mode mode Short Circuit Protection Hiccup mode 120% to 150% of nominal output voltage, Overvoltage Protection Hiccup Mode ~~——=~~ 

~~.~~ 

GB10 Datasheet v0719 

Copyright © 2019 SL Power Electronics Corp. All rights reserved. 

Page 2 

12W Single Output Medical/Industrial Grade 

**GB10 Family** 

## **ENVIRONMENT** 

-25°C ~ +70°C, see derating curve for operation Operating Temperature above  50°C Relative Humidity 5% to 90%, non-condensing Weight 100 grams 1.60” x 3.23” x 1.04” Dimensions 40.0mm x 82.0mm x 26.5mm Storage Temperature -40°C ~ +85°C Operating: 0.003g/Hz, 1.5 grams overall, 3 axes, 10 min/axis, 1Hz–500Hz Non-Oper.: random waveform, 3 mins/axis, 3  axes Vibration and Sine waveform, Vib. frequency/acceleration: 10Hz–500Hz/1g, sweep rate of 1 octave/minutes, Vibration time of 10 sweeps/axes, 3 axes Operating: Half-sine, 20gpk, 10mS, 3 axes, 6 shocks total Shock Non-Operating: Half-sine waveform, impact acceleration of 50G, pulse duration of 6mS,  Number of shocks: 3 for each of the 3 axis Cooling Convection 

## **EMI/EMC COMPLIANCE** 

|Conducted Emissions|EN55032, EN55011/CISPR11 Class B, FCC<br>Part  15.107, Class B: 6db margin type, at<br>115VAC and 230VAC|
|---|---|
|Radiated Emissions|EN55032, EN55011/CISPR11 Class B, FCC<br>Part  15.109, Class B: 3db margin type, at<br>115VAC and 230VAC|
|Electro-Static Discharge<br>(ESD) Immunity on Power<br>Ports|EN55024/IEC61000-4-2, Level 4: ±8kV contact,<br>±15kV air, Criteria A<br>IEC60601-1-2 4thEdition, Table 4|
|Radiated RF EM Fields<br>Susceptibility3|EN55022/EN61000-4-3, 10V/m, 80MHz–<br>2.7GHz,  80% AM at 1kHz<br>IEC60601-1-2 4thEdition, Table 4|
|Electrical Fast Transients<br>(EFT)/Bursts|EN55024/IEC61000-4-4, Level 4, ±4.4kV,<br>100Khz rep rate, 40A, Criteria A<br>IEC60601-1-2 4thEdition, Table 5|
|Surges, Line to Line (DM)<br>and Line to Ground (CM)|EN55024/IEC61000-4-5, Level 4, ±2kV DM,<br>±4kV CM, Criteria A<br>Surpasses IEC60601-1-2 4thEdition<br>requirements|
|Conducted RF Immunity|EN55022/IEC61000-4-6, 3.6V/m – Level 4,<br>(0.15MHz to  80MHz; and 12V/m) in ISM and<br>amateur radio bands  between 0.15MHz and<br>80MHz, 80% AM at 1KHz<br>IEC60601-1-2 4thEdition, Table 5|
|Power Frequency Magnetic<br>Field Immunity<br>~~P|~~|EN55024/IEC1000-4-8, Level 4: 30 A/m,<br>50Hz/60Hz, IEC60601-1-2 4thEdition, Table 4|
|Voltage Dip Immunity<br>~~P|~~|EN55024/IECEN61000-4-11:<br>--100% dip for 10mS, at 0°, 45°, 90°, 135°,<br>180°, 225°, 270° and 315°, 100% dip for 20mS,<br>0°, Criteria A(Criteria B for “P” option)<br>--100% dip for 5000mS (250/300 cycles),<br>Criteria B<br>--60% dip for 100mS, Criteria B<br>--30% dip for 500mS, Criteria A<br>IEC60601-1-2 4thEdition, Table 5|
|Harmonic Current<br>Emissions<br>~~|~~<br>~~Ff~~|EN55011/EN61000-3-2, Class A|
|Flicker Test<br>~~|~~<br>~~Ff~~|EN61000-3-3|



## Notes: 

1. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 

2. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Consult factory for information regarding testing or for usage under special environments. 

GB10 Datasheet v0719 

Copyright © 2019 SL Power Electronics Corp. All rights reserved. 

Page 3 

12W Single Output Medical/Industrial Grade 

## **GB10 Family** 

## **DERATING CURVE** 

**==> picture [387 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
14<br>12 QR<br>10 Rv<br> 5V-9V<br>8<br> 10V-24V<br>6<br>4<br>2<br>0 Xi ; . ! L 1 \ 1<br>-20 -10 0 10 20 30 40 50 60 70<br>Ambient Temperature (°C)<br>Watts<br>**----- End of picture text -----**<br>


## **MECHANICAL DRAWING** 

GB10 Datasheet v0719 

Copyright © 2019 SL Power Electronics Corp. All rights reserved. 

Page 4 

12W Single Output Medical/Industrial Grade 

**GB10 Family** 

## **CONNECTOR AND TERMINATION INFORMATION** 

|Input Connections|Input Connections|Input Connections|Input Connections|Ground|Ground|
|---|---|---|---|---|---|
|Version|Connector Pinout|Ground|Connector Type/Part No.|Connector Pinout|Connector Type/Part No.|
|Open Frame:<br>“K”, “C”|Pin 1: AC LINE<br>Pin 2: EMPTY<br>Pin 3: AC NEUTRAL|Pin 1: AC LINE<br>Pin 2: N/C<br>Pin 3: GROUND<br>Pin 4: N/C<br>Pin 5: AC NEUTRAL|Connector:<br>TE/AMP P/N 640445-5<br>Mating Connector: TE/<br>AMP P/N 640250-5<br>Pins= 770476-1|Pin 1: +Vout<br>Pin 2: +Vout<br>Pin 3: -Vout<br>Pin 4: -Vout|Connector:<br>TE/AMP P/N 640445-4<br>Mating Connector:<br>TE/AMP P/N 640250-4,<br>Pins= 770476-1|



Disclaimer: The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 

GB10 Datasheet v0719 

Copyright © 2019 SL Power Electronics Corp. All rights reserved. 

Page 5