G5V-1 DC12

~~**– G5V-1 TextPCB Signal Relay – G5V-1**~~ ■ **Contact Ratings Load** Resistive load (cosϕ = 1) **Rated Load** 0.5 A at 125 VAC; 1 A at 24 VDC **Contact Material** Ag (Au alloy) **Rated Carry Current** 2 A **Max. switching voltage** 125 VAC, 60 VDC **Max. switching current** 1 A **Max. switching power** 62.5 VA, 30 W **Failure rate (reference value)** 1 mA at 5 VDC **Note:** P level: λ60 = 0.1 x 10[-6] /operation. This value was measured at a switching frequency of 120 operaions/min and the criterion of contact resistance is 100. This ~~o0UC~~ value may vary depending on the operating environment. Always double-check relay suitability under actual operating conditions. ■ **Characteristics Contact resistance (see note 1)** 100 mΩ max. **Classification Model Operate time (see note 2)** 5 ms max. (mean value: approx. 2.5 ms) **Contact type Contact material Structure Release time (see note 2)** 5 ms max. (mean value: approx. 0.9 ms) Single crossbar AG (Au Alloy) Fully sealed G5V-1 **Max. operating frequency** Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr at rated load When ordering, add the rated coil voltage to the model number. **Insulation resistance (see note 2)** 1,000 MΩ min. (at 500 VDC between coil and contacts, at 250 VDC between contacts of same polarity.) Rated coil voltage **Dielectric strength** 1,000 VAC, 50/60 Hz for 1 min between coil and contacts 400 VAC, 50/60 Hz for 1 min between contacts of same polarity **Impulse withstand voltage** 1,500 V (10 x 160 µs) between coil and contacts (conforms to FCC Part 68) **Vibration resistance** Destruction: 10 to 55 to 10 Hz, 1.65mm single amplitude (3.3mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 1.65mm single amplitude (3.3mm double amplitude) **1.   Contact Form 2.   Rated Coil Voltage Shock resistance** Destruction: 1,000 m/s[2] 1:   SPDT 3, 5, 6, 9, 12, 24 VDC Malfunction: 100 m/s[2] **Endurance** Mechanical: 5,000,000 operations min. (at 18,000 operations/hr) Electrical: 100,000 operations min. (under rated load, at 1,800 operations/hr) **Ambient temperature** Operating: -40°C to 70°C (with no icing) **Ambient humidity** Operating: 5% to 85% ~~=~~ **Weight** Approx. 2 g 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC **Note: 1.** The contact resistance was measured wih 10mA at 1VDC with a voltage drop method. **2.** Values in parantheses are actual values. 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 6.25 mA **3.** The insulation resistance was measured with a 500VDC megohmeter between coil and contacts with a 250VDC megohmeter between contacts with the same polarity applied to the same parts as those used for checking the dielectric strength. 60 Ω 167 Ω 240 Ω 540 Ω 960 Ω 3,840 Ω **Armature OFF** 0.05 0.15 0.20 0.45 0.85 3.48 ■ **Approved Standards Armature ON** 0.11 0.29 0.41 0.93 1.63 6.61 **UL (File No. E41515)/CSA C22.2 No.0, No.14 (File No. LR31928)** 80% max. of rated voltage **Model Contact form Coil ratings Contact ratings** 10% min. of rated voltage G5V-1 SPDT 3 to 24 VDC 0.5 A, 125 VAC (general use) 0.3 A, 110 VDC (resistive load) 200% of rated voltage at 23°C 1 A, 30 VDC (resistive load) Approx. 150 mW ~~S=SS5=5~~ a The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. Operating characteristics are measured at a coil temperature of 23°C. 

~~**187**~~ 

~~**– G5V-1 TextPCB Signal Relay – G5V-1**~~ ■ **Contact Ratings Load** Resistive load (cosϕ = 1) **Rated Load** 0.5 A at 125 VAC; 1 A at 24 VDC **Contact Material** Ag (Au alloy) **Rated Carry Current** 2 A **Max. switching voltage** 125 VAC, 60 VDC **Max. switching current** 1 A **Max. switching power** 62.5 VA, 30 W **Failure rate (reference value)** 1 mA at 5 VDC **Note:** P level: λ60 = 0.1 x 10[-6] /operation. This value was measured at a switching frequency of 120 operaions/min and the criterion of contact resistance is 100. This ~~o0UC~~ value may vary depending on the operating environment. Always double-check relay suitability under actual operating conditions. ■ **Characteristics Contact resistance (see note 1)** 100 mΩ max. **Classification Model Operate time (see note 2)** 5 ms max. (mean value: approx. 2.5 ms) **Contact type Contact material Structure Release time (see note 2)** 5 ms max. (mean value: approx. 0.9 ms) Single crossbar AG (Au Alloy) Fully sealed G5V-1 **Max. operating frequency** Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr at rated load When ordering, add the rated coil voltage to the model number. **Insulation resistance (see note 2)** 1,000 MΩ min. (at 500 VDC between coil and contacts, at 250 VDC between contacts of same polarity.) Rated coil voltage **Dielectric strength** 1,000 VAC, 50/60 Hz for 1 min between coil and contacts 400 VAC, 50/60 Hz for 1 min between contacts of same polarity **Impulse withstand voltage** 1,500 V (10 x 160 µs) between coil and contacts (conforms to FCC Part 68) **Vibration resistance** Destruction: 10 to 55 to 10 Hz, 1.65mm single amplitude (3.3mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 1.65mm single amplitude (3.3mm double amplitude) **1.   Contact Form 2.   Rated Coil Voltage Shock resistance** Destruction: 1,000 m/s[2] 1:   SPDT 3, 5, 6, 9, 12, 24 VDC Malfunction: 100 m/s[2] **Endurance** Mechanical: 5,000,000 operations min. (at 18,000 operations/hr) Electrical: 100,000 operations min. (under rated load, at 1,800 operations/hr) **Ambient temperature** Operating: -40°C to 70°C (with no icing) **Ambient humidity** Operating: 5% to 85% ~~=~~ **Weight** Approx. 2 g 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC **Note: 1.** The contact resistance was measured wih 10mA at 1VDC with a voltage drop method. **2.** Values in parantheses are actual values. 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 6.25 mA **3.** The insulation resistance was measured with a 500VDC megohmeter between coil and contacts with a 250VDC megohmeter between contacts with the same polarity applied to the same parts as those used for checking the dielectric strength. 60 Ω 167 Ω 240 Ω 540 Ω 960 Ω 3,840 Ω **Armature OFF** 0.05 0.15 0.20 0.45 0.85 3.48 ■ **Approved Standards Armature ON** 0.11 0.29 0.41 0.93 1.63 6.61 **UL (File No. E41515)/CSA C22.2 No.0, No.14 (File No. LR31928)** 80% max. of rated voltage **Model Contact form Coil ratings Contact ratings** 10% min. of rated voltage G5V-1 SPDT 3 to 24 VDC 0.5 A, 125 VAC (general use) 0.3 A, 110 VDC (resistive load) 200% of rated voltage at 23°C 1 A, 30 VDC (resistive load) Approx. 150 mW ~~S=SS5=5~~ a The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. Operating characteristics are measured at a coil temperature of 23°C. 

~~**187**~~ 

**==> picture [321 x 368] intentionally omitted <==**

**----- Start of picture text -----**<br>
– G5V-1<br>ee<br>Endurance Ambient Temperature vs.<br>Maximum Coil Voltage<br>5,000<br>3,000<br>TL 1,000<br> 700<br>yt  500 300 100 P 24-VDC resistive load ttoft Rated coil voltage<br>LE   70  50 JA G<br>AC  125-VAC<br>resistive  resistive<br>load load<br>T HT TINS bea]<br>Switching voltage (V) Switching current (A) Ambient temperature (°C)<br>Note:    The maximum coil voltage refers to the maxi-<br>mum value in a varying range of operating<br>power voltage, not a continuous voltage.<br> All units are in millimetres unless otherwise indicated.<br>Numbers in parentheses are reference values.<br> Orientation marks are indicated as follows:<br>Terminal Arrangement/ Mounting Holes<br>12.5 max. 7.5 max.(7.3)* Internal Connections (Bottom View) (Bottom View)<br>(12.3)* 2.54 7.62<br>(1.07)<br>10 max.(9.9) 0.5 1 2 5 5.08+0.1(1.11)<br>10 9 6 (1.11)<br>3.5<br>Wo G oa<br>0.5 ll Six, 1-dia. holes 10.16+0.1 (1.07)<br>* Average value<br>3<br>Maximum coil voltage (%)<br>Endurance (x10   operations)<br>**----- End of picture text -----**<br>


## 

## **Relay Handling** 

When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40∞C. Do not put the Relay in a cold cleaning bath immediately after soldering. 

**==> picture [400 x 414] intentionally omitted <==**

**----- Start of picture text -----**<br>
TextPCB Signal Relay – G6E<br>Sub-miniature, Sensitive SPDT<br>Signal Switching Relay<br>■  ROHS compliant.<br>■  High sensitivity: 98mW pickup coil power.<br>■  Impulse withstand voltage meets FCC Part 68 m7<br>requirements. ,<br>■  Fully sealed construction. FA<br>■  Unique moving loop armature reduces relay<br>size, magnetic interference, and contact<br>bounce time.<br>■  Single- and double-winding latching types<br>also available. RC<br>we<br>Ordering Information<br>Contact form Terminal Single-side stable Single-winding latching Double-winding latching<br>SPDT Bifurcated Straight terminal G6E-134P-US G6EU-134P-US G6EK-134P-US<br>crossbar Self-clinching  G6E-134C-US G6EU-134C-US G6EK-134C-US<br>terminal<br>Note:    When ordering, add the rated coil voltage to the model number.<br>   Example: G4A-1A-E 12 VDC<br>a<br>Rated coil voltage<br>Model Number Legend<br>G6E       -                            -     -             VDC<br>OOOUOOOOUU<br>1 2 3 4 5 6 7 8 9<br>1.   Relay Function 3.   Contact Type 7.   Approved Standards<br>   None:   Single-side stable    3:   Bifurcated crossbar    US:  UL, CSA certified<br>   U:         Single-winding latching       Ag (Au-clad) contact 8.   Special Function<br>   K:         Double-winding latching    9:   Bifurcated crossbar    U:     For ultrasonically cleanable<br>2.   Contact Form       AgNi (Au-clad) contact 9.   Rated Coil Voltage<br>   1:          SPDT 4.   Enclosure Ratings    3, 5, 6, 9, 12, 24, 48 VDC<br>   4:   Fully sealed<br>5.   Terminals<br>   P:   Straight PCB<br>   C:   Curved tail<br>6.   Special Function<br>   L:   Low sensitivity coil (400 mW)<br>Signal Relays<br>**----- End of picture text -----**<br>


~~**189** |~~