FP2 D3002

## The Best Rela tion y 

## FP2 Relay 

108-98005 Rev. C EC-JM00-0009-03 ECOC: JM10 1. Apr. 04 

## FP2 Relay 

2 pole telecom / signal relay Through Hole Type (THT) Polarized. 

Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils 

## Features 

- Telecom / signal relay (dry circuit, test access, ringing) 

- Slim line 14 x 9 mm, 0.550 x 0.354 inch 

- Switching current 2 A 

- 2 changeover contacts (2 form C / DPDT) 

- Bifurcated contacts 

- High sensitivity results in low nominal power consumption 

- 80 mW for high sensitive, 140 mW for sensitive version 

–  High mechanical shock resistance up to 300 G functional up to 1500 G survival 

## Typical applications 

- Communications equipment Linecard application - analog, ISDN, xDSL, PABX Voice over IP 

- Office and business equipment 

- Measurement and control equipment 

- Consumer electronics Set top boxes, HiFi 

- Medical equipment 

UL 508 File No. E111441 

IEC 61811-53:01 (QC 160503) 

## European Directive conformance: 

FP2 relay product conformance according to: 

   - Directive 2000/53/EC:  ELV (End of Life of Vehicles) 

   - Directive 2002/95/EC: ROHS (Restrictions of the use of certain  hazardous substances in electrical and electronic equipment) 

- Compliance is evidenced by written declaration from all raw material suppliers. 

Tyco Electronics AXICOM only has responsibility for the proper processing of these materials. Confirmation is valid for date codes ≥ 0336 

Page 2 (10) 108-98005 Rev. C 

FP2 Relay 

## Dimensions 

THT mm                       inch L        14.02 ± 0.08    0.574 ± 0.008 W      9.02 ± 0.08       0.035 ± 0.003 H       5 ± 0.1                 0.196 ± 0.004 T        3.2 + 0.3             0.125 + 0.011 T1     N/A                      N/A T2     7.62 ± 0.1          0.3 ± 0.004 Tw    0.5                        0.020 S        0.25+0.05         0.009+0.002 

## THT Version 

## Mounting hole layout 

View onto the component side of the PCB (top view) 

**==> picture [124 x 100] intentionally omitted <==**

Basic grid 2.54 mm 

Terminal assignment Relay - top view 

Non-latching type, not energized condition 

**==> picture [83 x 70] intentionally omitted <==**

Latching type, reset condition 

**==> picture [91 x 70] intentionally omitted <==**

latching, 2 coils reset condition 

**==> picture [50 x 108] intentionally omitted <==**

Contacts in reset position. Both coils can be used as  either set or reset coils. 

Page 3 (10) 108-98005 Rev. C 

## FP2 Relay 

|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|Coil Data (values at 23°C)<br>Ordering Information|
|---|---|---|---|---|---|---|
|Nominal<br>voltage<br> _U_nom<br> <br> <br> Vdc|Operate/set voltage range<br> <br> <br>Minimum           Maximum<br>voltage_U_minvoltage_U_max<br>Vdc                         Vdc|Release/<br>reset voltage<br>Minimum<br>Vdc|Coil<br>power<br>mW|Coil<br>Resistance<br>Ω/ ± 10 %|Relay<br>code|Tyco part<br>number|



|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|non-latching<br>1 coil|
|---|---|---|---|---|---|---|---|
|3|2.1|6.6|0.30|140|64|D 3006|1-1462033-3|
|4.5|3.15|9.9|0.45|140|145|D 3004|0-1462033-9|
|5|3.5|11.0|0.50|140|178|D 3009|1-1462033-4|
|6|4.2|13.2|0.60|140|257|D3005|1-1462033-1|
|9|6.3|19.8|0.90|140|574|D 3010|2-1462033-1|
|12|8.4|26.4|1.20|140|1028|D 3002|0-1462033-5|
|24|16.8|44.3|2.40|200|2880|D 3012|2-1462033-2|
|48|33.6|72.3|4.80|300|7680|D 3013|2-1462033-6|



|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|non-latching 1 coil<br>high sensitive version|
|---|---|---|---|---|---|---|---|
|3|2.25|8.7|0.3|80|113|D 3021|3-1462033-2|
|4.5|3.38|13.1|0.45|80|253|D 3022|3-1462033-3|
|5|3.75|14.6|0.5|80|313|D 3023|3-1462033-4|
|6|4.50|17.5|0.6|80|450|D 3024|3-1462033-5|
|9|6.75|24.2|0.9|80|1013|D 3025|3-1462033-6|
|12|9.00|35.0|1.2|80|1800|D 3026|3-1462033-7|
|24|18.00|52.8|2.4|140|4114|D 3027|3-1462033-8|
|48|36.00|77.6|4.8|260|8882|D 3028|3-1462033-9|
|latching<br>1 coil||||||||
|3|2.25|7.8|2.25|100|90|D 3041|4-1462033-0|
|4.5|3.38|11.7|3.38|100|203|D 3042|4-1462033-1|
|5|3.75|13.0|3.75|100|250|D 3043|4-1462033-2|
|6|4.50|15.6|4.50|100|360|D 3044|4-1462033-3|
|9|6.75|23.5|6.75|100|810|D 3045|4-1462033-4|
|12|9.00|31.3|9.00|100|1440|D 3046|4-1462033-5|
|24|18.00|47.5|18.00|150|3840|D 3047|4-1462033-6|
|latching<br>2 coils||||||||
|3|2.1|5.5|2.1|200|45|D 3061|4-1462033-7|
|4.5|3.15|8.3|3.15|200|101|D 3062|4-1462033-8|
|5|3.5|7.2|3.5|200|125|D 3063|4-1462033-9|
|6|4.2|11.1|4.2|200|180|D 3064|5-1462033-0|
|9|6.3|16.8|6.3|200|405|D 3065|5-1462033-1|
|12|8.4|28.1|8.4|200|720|D 3066|5-1462033-4|
|24|16.8|44.3|16.8|300|1920|D 3067|5-1462033-6|



Further coil versions are available on request. 

Page 4 (10) 108-98005 Rev. C 

FP2 Relay 

## Coil operating range 

**==> picture [295 x 663] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.4<br>80 mW<br>3.2 140 mW<br>3 200 mW<br>2.8 U max.  at 0 A<br>2.6 Umax. at 2 x 1 A<br>2.4 Umax. at 2 x 2 A<br>2.2<br>2<br>1.8<br>1.6<br>1.4<br>1.2<br>1 Unom. nominal coil voltage<br>0.8<br>0.6<br>Uop. min.<br>0.4<br>Urel. min.<br>0.2<br>0<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120<br>Ambient Temperature [°C]<br>2.6<br>260 mW<br>2.4 300 mW<br>2.2<br>Umax. at 0 A<br>2.0 U max.  at 2 x 1 A<br>Umax. at 2 x 2 A<br>1.8<br>1.6<br>1.4<br>1.2<br>1.0 Unom. nominal coil voltage<br>0.8<br>0.6<br>Uop. min.<br>0.4<br>Urel. min.<br>0.2<br>0.0<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120<br>Ambient Temperature [°C]<br>4.6<br>4.4 200 mW Latching<br>4.2 100 mW Latching<br>4<br>3.8 Umax. - 100 % coil duty at 0 A<br>3.6<br>3.4<br>3.2<br>3<br>2.8<br>2.6<br>2.4<br>2.2<br>2<br>1.8<br>U max.  - 5 % coil duty at 2 x 2 A<br>1.6<br>Umax. - 5 % coil duty at 2 x 1 A<br>1.4<br>1.2 Umax. - 5 % coil duty at 0 A<br>1 Unom. nominal coil voltage<br>0.8<br>0.6<br>Uset min.<br>0.4<br>0.2<br>0<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140<br>]nom<br>Coil Voltage [U/U<br>]nom<br>Coil Voltage [U/U<br>]nom<br>Coil Voltage [U/U<br>**----- End of picture text -----**<br>


Unom =           Nominal coil voltage 

Umax. =           Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized 

Uop. min. =      Lower limit of the operative range of the coil voltage (reliable operate voltage) 

Urel. min. =      Lower limit of the operative range of the coil voltage (reliable release voltage) 

Ambient Temperature [°C] 

Page 5 (10) 108-98005 Rev. C 

FP2 Relay 

|Contact Data|Contact Data|
|---|---|
|Number of contacts and type|2 changeover contacts|
|Contact assembly|Bifurcated contacts|
|Contact material|Silver-nickel, gold-covered|
|Limiting continuous current at max. ambient temperature|2 A|
|Maximum switching current|2 A|
|Maximum swichting voltage|220 Vdc<br>250 Vac|
|Maximum switching capacity|60 W, 62.5 VA|
|Thermoelectric potential|< 10mV|
|Minimum switching voltage|100mV|
|Initial contact resistance / measuring condition: 10 mA / 20 mV|< 50 mW|
|Electrical endurance      at contact application 0 (³30 mV/³10 mA)<br>at cable load open end<br>at 125 Vdc / 0.24 A - 30 W<br>at 250 Vac / 0.25 A - 62.5 VA<br>at 24 V / 1.25 A - 30 W|min. 2.5 x 106operations<br>min. 2.0 x 106operations<br>min. 1.0 x 105operations<br>min. 1.0 x 105operations<br>min. 3.0 x 105operations|
|Mechanical endurance|typ. 108operations|
|UL contact ratings|220 Vdc / 0.24 A - 60 W<br>125 Vdc / 0.24 A - 30 W<br>250 Vac / 0.25 A - 62.5 VA<br>125 Vac / 0.5 A - 62.5 VA<br>30 Vdc / 2 A - 60 W|



## Max. DC load breaking capacity 

Max. DC load breaking capacity 

**==> picture [211 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
DC current [A]<br> DC Voltage [Vdc]<br>**----- End of picture text -----**<br>


Page 6 (10) 108-98005 Rev. C 

## Insulation 

|Insulation resistance at 500 VDC|> 109 W|
|---|---|
|Dielectric test voltage (1 min)<br>between coil and contacts<br>between adjacent contact sets<br>between open contacts|1000 Vrms<br>1000 Vrms<br>750 Vrms|
|Surge voltage resistance<br>according IEC (10 / 700ms)<br>between coil and contacts<br>between adjacent contact sets<br>between open contacts<br>according to FCC 68 (10 / 160ms)<br>between coil and contacts<br>between adjacent contact sets<br>between open contacts|1500 V<br>1500 V<br>1500 V<br>1500 V<br>1500 V<br>1500 V|



|High Frequency Data|High Frequency Data|
|---|---|
|||
|Capacitance<br>between coil and contacts<br>between adjacent contact sets<br>between open contacts|max. 4 pF<br>max. 1 pF<br>max. 1 pF|
|RF Characteristics<br>Isolation at 100 / 900 MHz<br>Insertion loss at 100 / 900 MHz<br>V.S.W.R. at 100 / 900 MHz|-40.2 dB / -22.3 dB<br>-0.03 dB  / -0.25 dB<br>1.01 / 1.07|



## General data 

|Operate time at_U_nomtyp. / max.|3 ms / 4 ms|
|---|---|
|Reset time (latching) at_U_nom, typ. / max.|3 ms / 4 ms|
|Release time without diode in parallel (non-latching), typ. / max.|1 ms/3 ms|
|Release time with diode in parallel (non-latching), typ. / max.|3 ms / 4 ms|
|Bounce time at closing contact, typ. / max.|1 ms / 5 ms|
|Maximum switching rate without load|50 operations/s|
|Ambient temperature|-55° C ... +85° C|
|Thermal resistance|< 150 K/W|
|Maximum permissible coil temperature|125° C|
|Vibration resistance (function)|20 G<br>10 to 500 Hz|
|Shock resistance, half sinus, 11 ms|50 G (function)<br>1500 G(damage)|
|Degree ofprotection / Environmentalprotection|immersion cleanable,IP 67/RT III|
|Needle flame test|application time 20 s, no burningorglowing|
|Mounting position|any|
|Processing information|Ultrasonic cleaningis not recommended|
|Weight (mass)|max. 2g|
|Terminal surface|SnCu 0.7|
|Resistance to solderingheat|260° C/10 s|



All data refers to 23° C unless otherwise specified. 

Page 7 (10) 108-98005 Rev. C 

## FP2 Relay 

## Packing 

Tube for THT version - 50 relays per stick, 1000 relays per box 

**==> picture [137 x 95] intentionally omitted <==**

**==> picture [103 x 52] intentionally omitted <==**

Page 8 (10) 108-98005 Rev. C 

FP2 Relay 

## IM Relays 

4[th] generation slim line – low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption of  140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings)  and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 

## P2 Relays 

3[rd] generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 15 x 7,5 mm board space and 10 mm height. 

## FX Relays 

3[rd] generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads  up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. 

## FT2 / FU2 Relays 

3[rd] generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. 

## FP2 Relays 

3[rd] generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads  up to 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. 

## MT2 / MT4 

2[nd] generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... 48 V, coil power consumption 150/200/300/400 and 550 mW, and 300 mW (MT4). Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) the MT4 only. Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height. 

## D2n Relays 

2[nd] generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x10 mm board space and 11,5 mm height. 

## P1 Relays 

Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. 

## W11 Relays 

Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. 

## Reed Relays 

High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. 

## Cradle Relays 

Extremely reliable and mature relay family of 1[st] generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. 

## Other Relays 

We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. 

## HF3 Relay 

High performance low cost RF relay with excellent RF characteristics. Available with an impedance of 50 and 75 Ohm. Suitable for frequencies up to 3 GHz. Actually smallest RF relay available combining small size, excellent RF performance and SMD solderability. Available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm. 

Page 9 (10) 108-98005 Rev. C 

Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wädenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com 

Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com 

Tyco Electronics EC Trutnov s.r.o. Komenského 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com 

Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752 

Page 10 (10) 108-98005 Rev. C