FLLD4120ATHT6

EMI Filters 

## **FLLD4 – TH, 530/305 VAC,  8 – 200 A High Performance Chassis Mount Three-Phase and Neutral Filters** 

## **Overview** 

These are compact, general purpose, three-phase + N filters, with terminal blocks for quick installation in industrial equipment. They are optimized in geometry, with high insertion loss characteristics. 

## **Applications** 

Typical applications include switch-mode power supplies, servo drives, robotics, regenerative drives, battery chargers, inverters, converters, power drives, UPS machines, process automation and other industrial applications. 

## **Technical Specifications** 

|**Item**|**Parameters/**<br>**Characteristics**|
|---|---|
|Rated Voltage|530/305 VAC|
|Rated Frequency|50 – 60 Hz|
|Rated Current|8 – 200 A|
|Rated Temperature|50°C|
|Temperature Range|−25°C to 100°C|
|Climate Category|25/100/21|
|Voltage Test|P→P 2,250 VDC<br>P→E 3,000 VDC|



## Typical Electrical Schematic 

**==> picture [281 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
L1 L1<br>L2 Qi... L2<br>L3 | io L3<br>== = O =) | /= / |=<br>N N<br>PE PE<br>LINE LOAD<br>**----- End of picture text -----**<br>


**Built Into Tomorrow** ~~Le~~ 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0002_FLLD4-TH • 9/30/2021 1 

EMI Filters 

FLLD4 – TH, 530/305 VAC,  8 – 200 A, High Performance Chassis Mount Three-Phase and Neutral Filters 

## **Technical Specifications cont.** 

**==> picture [475 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Current  Power Loss  Leakage Current [1]  Approximate<br>Part Number<br>at 50°C (A) at 25°C/50 Hz (W) (mA) Weight (kg)<br>**----- End of picture text -----**<br>


|**Part Number**|**Rated Current**<br>**at 50°C(A)**|**Power Loss**<br>**at 25°C/50 Hz(W)**|**Leakage Current1**<br>**(mA)**|**Approximate**<br>**Weight(kg)**|
|---|---|---|---|---|
||||||
|FLLD4008ATHT3|8|3|11|0.8|
|FLLD4016ATHT3|16|6|11|0.8|
|FLLD4025ATHT3|25|12|11|1.2|
|FLLD4036ATHT3|36|15|11|1.2|
|FLLD4064ATHT5|64|18|11|2.3|
|FLLD4080ATHT6|80|20|11|4.0|
|FLLD4120ATHT6|120|30|11|5.3|
|FLLD4160ATHT7|160|32|11|6.1|
|FLLD4200ATHT7|200|45|11|6.1|



_1 Calculated according to IEC 60939.  During fail conditions the current may be higher._ 

## **Approvals** 

**==> picture [542 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Certification Body File Number Mark<br>IEC/EN 60939–3 UL-Demko<br>ANSI/UL 60939–3–2016 UL E490803<br>**----- End of picture text -----**<br>


## **Environmental Compliance** 

KEMET EMI filters are RoHS Compliant. 

**==> picture [60 x 56] intentionally omitted <==**

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0002_FLLD4-TH • 9/30/2021 2 

EMI Filters FLLD4 – TH, 530/305 VAC,  8 – 200 A, High Performance Chassis Mount Three-Phase and Neutral Filters 

## **Typical Insertion Loss** 

8 to 16 A 

## 25 to 36 A 

**==> picture [526 x 372] intentionally omitted <==**

**----- Start of picture text -----**<br>
Differential mode Common mode Differential mode Common mode<br>100 100<br>90 90<br>80 80<br>70 70<br>60 60<br>50 50<br>40 40<br>30 30<br>20 20<br>10 10<br>0 0<br>0.01 0.1 1 10 100 0.01 0.1 1 10 100<br>Frequency (MHz) Frequency (MHz)<br>64 to 120 A 160 to 200 A<br>Differential mode Common mode Differential mode Common mode<br>100 100<br>90 90<br>80 80<br>70 70<br>60 60<br>50 50<br>40 40<br>30 30<br>20 20<br>10 10<br>0 0<br>0.01 0.1 1 10 100 0.01 0.1 1 10 100<br>Frequency (MHz) Frequency (MHz)<br>Attenuation (dB) Attenuation (dB)<br>Attenuation (dB) Attenuation (dB)<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0002_FLLD4-TH • 9/30/2021 3 

EMI Filters 

FLLD4 – TH, 530/305 VAC,  8 – 200 A, High Performance Chassis Mount Three-Phase and Neutral Filters 

## **Mechanical Dimensions – Millimeters** 

**==> picture [367 x 222] intentionally omitted <==**

**----- Start of picture text -----**<br>
K<br>W1 W2<br>L1<br>L W<br>H<br>M<br>J<br>**----- End of picture text -----**<br>


**==> picture [542 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions<br>Terminal Block<br>Part Number<br>L L1 W W1 W2 H J K M Wire Torque<br>(mm [2] ) (Nm)<br>FLLD4008ATHT3 120 80 115 127.5 143 80 32 6.5 M6 1 – 10 1.2 – 1.5<br>FLLD4016ATHT3 120 80 115 127.5 143 80 32 6.5 M6 1 – 10 1.2 – 1.5<br>FLLD4025ATHT3 130 90 125 137.5 153 115 32 6.5 M6 1 – 10 1.2 – 1.5<br>FLLD4036ATHT3 130 90 125 137.5 153 115 32 6.5 M6 1 – 10 1.2 – 1.5<br>FLLD4064ATHT5 160 100 125 137.5 153 125 35 6.5 M10 10 – 25 3 – 4<br>FLLD4080ATHT6 230 120 135 147.5 165 125 35 6.5 M10 16 – 50 6 – 8<br>FLLD4120ATHT6 250 200 140 153.5 170 140 55 6.5 M10 16 – 50 6 – 8<br>FLLD4160ATHT7 280 230 140 153.5 170 170 50 6.5 M10 35 – 95 15 – 20<br>FLLD4200ATHT7 280 230 140 153.5 170 170 50 6.5 M10 35 – 95 15 – 20<br>**----- End of picture text -----**<br>


_Tolerances, if not stated, according to ISO 2768-c._ 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0002_FLLD4-TH • 9/30/2021 4 

EMI Filters FLLD4 – TH, 530/305 VAC,  8 – 200 A, High Performance Chassis Mount Three-Phase and Neutral Filters 

## 

## **Disclaimer** 

All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. 

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. 

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. 

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. 

_KEMET is a registered trademark of KEMET Electronics Corporation._ 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0002_FLLD4-TH • 9/30/2021 5