FLKU 10 ST

## **Data sheet Product FLKU 10 ... ST** 

Profile heatsinks and liquid coolers>Fluid coolers technical data refer to a water inlet temperature of 23 °C stainless austenitic steel / 1.4404 stainless steel V4A 

- water as a cooling medium without corrosion protection inhibitors suitable liquid pumps and hose systems on request other materials with higher thermal conductivity (nickel) on request version with soldering for PCB mounting on request customer-specific adaptations and designs 

* ground flat 

Liquid coolers for circuit board assembly; **produced in 3D printing with an AIoptimized heat exchange structure** ; dissipation of large amounts of heat with little space requirement; **particularly suitable for power semiconductors in TO case, SIP Multiwatt and similar** ; simple and safe component assembly using lock-in retaining springs for transistors from the THFU series; **separate cooling circuit on each mounting side;** minimized flow pressure losses through optimized heat exchange structure; **finely ground semiconductor mounting surfaces with very good flatness and low surface roughness** ; maximum operating pressure up to 3 bar; **max. dissipated power loss with a difference in water temperature (IN = 33 ° C, OUT = 43 ° C) of 670W** ; simple connection via plastic hoses from the pneumatics area; **dimensional adjustments to the given installation conditions** 

## **Features** 

|width:|9.6 mm|
|---|---|
|height:|30 mm|
|length:|45 mm|
|material:|stainless steel 1.4404|



**Technical Drawing**