FL40/D25/A/RN

## **C l i f f o r d  &  S n e l l** 

## _**Xenon Strobe -  Visual Alarm ~ Yodac ~**_ 

Tom Cribb Road, Thamesmead, London SE28 0BH Tel: +44 (0)20 8316 4477 or (0)20 8317 1717 Fax: +44 (0)20 8317 2400 Email: cliffordandsnell@aol.com Web Site: www.cliffordandsnell.com 

## **MAIN FEATURES** 

- Continuously rated 

- Strobe 2.5 and 5 joule 

- High flash intensity 

- 360 degree visibility 

- Reliable and simple to install 

- Complements audible alarm system 

- Flush mounting base available 

- Red / White flame retardant ABS plastic enclosure 

## **DIMENSIONS (mm)** 

**==> picture [177 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
oe a Ch 90 (3.5”)<br>90 (3.5”)<br>ae i 49 (1.9”)<br>81 (3.2”)<br>a: =<br>**----- End of picture text -----**<br>


All dimensions quoted are approximate only and subject to change without notice as are technical features resulting from continual development and improvement. 

## **CONFIGURATOR** 

**==> picture [241 x 243] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit Type   Strobe<br>Strobe  12Vdc 2.5joules  @&<br>supply<br>Voltage  24Vdc 2.5 joules  Pins<br>and<br>Flash  24Vdc 5.0 joules  @<br>Energy 48Vdc 5.0 joules  FSO)<br>115Vac 5.0 joules  @<br>230Vac 5.0 joules  @<br>Lens Colours<br>@ @<br>@ 2 O2@<br>Base Colours  Red Flame   @<br>Red Normal<br>CRN<br>White<br>WN<br>Certification USA/Canada  ><br>DC Type  AC Type<br>**----- End of picture text -----**<br>


- Lens colours: Amber (A), Red (R), Green (G), Opal (O), 

- Blue (B)  and Clear (C) made from  flame retardant polycarbonate plastic. 

- Steady lamp version available upon request 

## **TECHNICAL SPECIFICATION** 

- Operating temperature range  –25 to +40 deg C 

- Storage temperature range      –40 to +70 deg C 

- Relative humidity                    90% @ 40 deg C 

- IP65 Rated 

- Weight: DC types                   0.24Kg AC types                   0.22Kg 

- Operating voltage                    12Vdc or 24Vdc or 48Vdc 115Vac or 230Vac 

- Current consumption (Flash Energy).  See design data below. 

- • Flash rate 1 per second 

## **MOUNTING** 

All units are supplied separate from the back box for ease of installation. The back box must be mounted with the two cable entries at the top or bottom. The back box should be mounted to a reasonably flat surface or to a standard wiring box, using any of the internal mounting holes. A gasket is supplied, should the surface be uneven, or if the unit is to be used in wet conditions. To maintain the integrity of the weather seal, the cable must be fitted using a suitable sealed gland. The installation is completed by fitting the beacon onto the back box by means of the supplied screws. 

## **DESIGN DATA** 

|OperatingVoltage|12Vdc  24Vdc   48Vdc 115Vac 230Vac|12Vdc  24Vdc   48Vdc 115Vac 230Vac|
|---|---|---|
|Flash Energy (Joules)<br>Light output, opal lens<br>Candela sec|2.5<br>2.5 - 5     5<br>5<br>5<br>4.5<br>4.5 - 14      14           14<br>14|5<br>14|
|Current consumption<br>(mA)<br>300       150 - 250    135         130       70<br>**CAUTION:**High voltages are present within the beacon when<br>operational.||300       150 - 250    135         130       70<br>High voltages are present within the beacon when|



## **LINE MONITORING** 

Monitoring via reverse polarity End of line resistance. Minimum 3K3 ohms 0.5 watts wire-wound or metal film type 

## **APPROVAL SPECIFICATION** 

UL 1638 CAN/ULC-S526-M87 

Controlled document No. D7410-01-02 \\BGRICE\3 Issued\Data Sheets\V4 

**Clifford & Snell a division of Signature Industries part of the Digital Angel Corporation**