FDL-65-1550

**- FDL 65 series** 

65W Constant Current Mode LED Driver 

**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


**==> picture [79 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
IP65<br>■<br>**----- End of picture text -----**<br>


**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


～ 

℃ ℃ 

**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


_File Name:FDL-65-SPEC   2019-01-22_ 

**- FDL 65 series** 

65W Constant Current Mode LED Driver 

## **SPECIFICATION** 

|**MODEL**<br>**RATED CURRENT**<br>**RATED POWER**<br>**OUTPUT**<br>**SET UP TIME**<br>**Note.3**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**EMC IMMUNITY**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>**OVER VOLTAGE**<br>500ms/230VAC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>47 ~ 63Hz<br>PF<br>0.95/230VAC, PF<br>0.90/277VAC@full load<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br><0.75mA / 277VAC<br>**ENVIRONMENT**<br>**EMC EMISSION**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>Shut down o/p voltage, re-power on to recover<br>**SHORT CIRCUIT**<br>Hiccup mode, recovers automatically after fault condition is removed<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**CURRENT TOLERANCE**<br>±5.0%<br>**CONSTANT CURRENT REGION Note.2**<br>**TOTAL HARMONIC DISTORTION**<br>**OPEN CIRCUIT VOLTAGE(max.)**<br>COLD START 11A(twidth=<br>s measured at 50% Ipeak)/230VAC<br>35<br>Per NEMA 410<br>μ<br>;<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>26 units (circuit breaker of type B) / 26 units  (circuit breaker of type C) at 230VAC<br>℃<br>℃<br>℃<br>180 ~ 295VAC          254 ~ 417VDC<br><0.5W<br>25.2 ~ 42V<br>**FDL-65-1550**<br>**FDL-65-1800**<br>1550mA<br>65.1W<br>21.6 ~ 36V<br>1800mA<br>64.8W<br>50V<br>45V<br>90%<br>90%<br>0.48A / 230VAC      0.39A/277VAC<br>46 ~ 56V<br>40 ~ 48V<br>**WORKING TEMP.**<br>Compliance to EN55015, EN61000-3-2 Class C (load<br>60%) ; EN61000-3-3,GB17743,GB17625.1<br>≧<br>,EAC TP TC 020<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:4KV,Line-Line:2KV),EAC TP TC 020<br>20 ~ 95% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 60<br>)<br>10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes<br>I/P-O/P:3.75KVAC         I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>LVD EN61347-1,EN61347-2-13 Independent, GB19510.1,GB19510.14,EAC TP TC 004, IP65 approved<br>594.9K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>151*53*31.5mm (L*W*H)<br>0.441Kg; 24pcs / 11.6Kg / 0.73CUFT<br>**CURRENT ADJ. RANGE**<br>Hiccup mode, recovers automatically after fault condition is removed<br>0.77-1.55A<br>0.9~1.8A<br>THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-40 ~ +90<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**MAX. CASE TEMP.**<br>Tcase=+90℃<br>~~eG~~<br>ee~~eG~~<br>~~es~~<br>ee~~a~~<br>eeNe<br>~~eG~~<br>De<br>a<br>Ge<br>a~~——~~<br>~~ee~~a<br>CR<br>ee<br>ee<br>~~Ge~~<br>ee<br>a<br>rs<br>Iee<br>Re<br>Re<br>ee<br>1. All parametersNOT specially mentioned are measured at230VAC input, rated currentand 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>6. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**MODEL**<br>**RATED CURRENT**<br>**RATED POWER**<br>**OUTPUT**<br>**SET UP TIME**<br>**Note.3**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**EMC IMMUNITY**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>**OVER VOLTAGE**<br>500ms/230VAC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>47 ~ 63Hz<br>PF<br>0.95/230VAC, PF<br>0.90/277VAC@full load<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br><0.75mA / 277VAC<br>**ENVIRONMENT**<br>**EMC EMISSION**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>Shut down o/p voltage, re-power on to recover<br>**SHORT CIRCUIT**<br>Hiccup mode, recovers automatically after fault condition is removed<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**CURRENT TOLERANCE**<br>±5.0%<br>**CONSTANT CURRENT REGION Note.2**<br>**TOTAL HARMONIC DISTORTION**<br>**OPEN CIRCUIT VOLTAGE(max.)**<br>COLD START 11A(twidth=<br>s measured at 50% Ipeak)/230VAC<br>35<br>Per NEMA 410<br>μ<br>;<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>26 units (circuit breaker of type B) / 26 units  (circuit breaker of type C) at 230VAC<br>℃<br>℃<br>℃<br>180 ~ 295VAC          254 ~ 417VDC<br><0.5W<br>25.2 ~ 42V<br>**FDL-65-1550**<br>**FDL-65-1800**<br>1550mA<br>65.1W<br>21.6 ~ 36V<br>1800mA<br>64.8W<br>50V<br>45V<br>90%<br>90%<br>0.48A / 230VAC      0.39A/277VAC<br>46 ~ 56V<br>40 ~ 48V<br>**WORKING TEMP.**<br>Compliance to EN55015, EN61000-3-2 Class C (load<br>60%) ; EN61000-3-3,GB17743,GB17625.1<br>≧<br>,EAC TP TC 020<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:4KV,Line-Line:2KV),EAC TP TC 020<br>20 ~ 95% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 60<br>)<br>10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes<br>I/P-O/P:3.75KVAC         I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>LVD EN61347-1,EN61347-2-13 Independent, GB19510.1,GB19510.14,EAC TP TC 004, IP65 approved<br>594.9K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>151*53*31.5mm (L*W*H)<br>0.441Kg; 24pcs / 11.6Kg / 0.73CUFT<br>**CURRENT ADJ. RANGE**<br>Hiccup mode, recovers automatically after fault condition is removed<br>0.77-1.55A<br>0.9~1.8A<br>THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-40 ~ +90<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**MAX. CASE TEMP.**<br>Tcase=+90℃<br>~~eG~~<br>ee~~eG~~<br>~~es~~<br>ee~~a~~<br>eeNe<br>~~eG~~<br>De<br>a<br>Ge<br>a~~——~~<br>~~ee~~a<br>CR<br>ee<br>ee<br>~~Ge~~<br>ee<br>a<br>rs<br>Iee<br>Re<br>Re<br>ee<br>1. All parametersNOT specially mentioned are measured at230VAC input, rated currentand 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>6. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**FDL-65-1550**|**FDL-65-1800**|
|---|---|---|---|
||**RATED CURRENT**<br>~~eG~~<br>ee|1550mA<br>~~eG~~<br>~~eG~~|1800mA<br>~~eG~~<br>~~eG~~|
||**RATED POWER**<br>~~eG~~<br>ee|65.1W<br>~~eG~~<br>~~eG~~|64.8W<br>~~eG~~<br>~~eG~~|
||**CONSTANT CURRENT REGION Note.2**<br>ee<br>~~es~~<br>ee|25.2 ~ 42V<br>~~eG~~<br>~~es~~<br>~~a~~|21.6 ~ 36V<br>~~eG~~<br>~~es~~|
||**OPEN CIRCUIT VOLTAGE(max.)**<br>~~es~~<br>ee<br>ee|50V<br>~~es~~<br>~~a~~<br>Ne|45V<br>~~es~~|
||**CURRENT ADJ. RANGE**<br>ee<br>ee<br>~~eG~~|0.77-1.55A<br>~~a~~<br>Ne<br>~~eG~~|0.9~1.8A<br>~~eG~~|
||**CURRENT TOLERANCE**<br>ee<br>~~eG~~<br>De|±5.0%<br>Ne<br>~~eG~~||
||**SET UP TIME**<br>**Note.3**<br>~~eG~~<br>De|500ms/230VAC<br>~~eG~~||
||**VOLTAGE RANGE**<br>De<br>~~——~~|(Please refer to "STATIC CHARACTERISTIC" section)<br>180 ~ 295VAC          254 ~ 417VDC<br>~~——~~||
||**FREQUENCY RANGE**<br>a<br>~~——~~|47 ~ 63Hz<br>~~——~~||
||**POWER FACTOR (Typ.)**<br>a<br>~~——~~|PF<br>0.95/230VAC, PF<br>0.90/277VAC@full load<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>~~——~~||
||**TOTAL HARMONIC DISTORTION**<br>~~——~~|THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>~~——~~||
||**EFFICIENCY (Typ.)**<br>Ge<br>a~~——~~|90%<br>Ge<br>~~——~~|90%<br>Ge<br>~~——~~|
||**AC CURRENT (Typ.)**<br>Ge<br>a~~——~~|0.48A / 230VAC      0.39A/277VAC<br>Ge<br>~~——~~||
||**INRUSH CURRENT(Typ.)**<br>a~~——~~|COLD START 11A(twidth=<br>s measured at 50% Ipeak)/230VAC<br>35<br>Per NEMA 410<br>μ<br>;<br>~~——~~||
||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>~~——~~|26 units (circuit breaker of type B) / 26 units  (circuit breaker of type C) at 230VAC<br>~~——~~||
||**LEAKAGE CURRENT**<br>~~——~~|<0.75mA / 277VAC<br>~~——~~||
||~~——~~<br>~~ee~~a|<0.5W<br>~~——~~<br>a||
||**SHORT CIRCUIT**<br>~~——~~<br>~~ee~~a|Hiccup mode, recovers automatically after fault condition is removed<br>~~——~~<br>a||
||**OVER VOLTAGE**<br>~~ee~~a<br>CR<br>ee|Shut down o/p voltage, re-power on to recover<br>46 ~ 56V<br>40 ~ 48V<br>a<br>CR||
||**OVER TEMPERATURE**<br>CR<br>ee|Hiccup mode, recovers automatically after fault condition is removed<br>CR||
||**WORKING TEMP.**<br>CR<br>ee<br>ee|Tcase=-40 ~ +90<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>CR||
||**MAX. CASE TEMP.**<br>ee|Tcase=+90℃||
||**WORKING HUMIDITY**<br>ee<br>~~Ge~~<br>ee|20 ~ 95% RH non-condensing<br>~~Ge~~||
||**STORAGE TEMP., HUMIDITY**<br>ee<br>a|-40 ~ +80<br>, 10 ~ 95% RH<br>℃||
||**TEMP. COEFFICIENT**<br>ee<br>a|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 60<br>)||
||**VIBRATION**|10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes||
||**SAFETY STANDARDS**|LVD EN61347-1,EN61347-2-13 Independent, GB19510.1,GB19510.14,EAC TP TC 004, IP65 approved||
||**WITHSTAND VOLTAGE**<br>rs<br>I|I/P-O/P:3.75KVAC         I/P-FG:2KVAC     O/P-FG:1.5KVAC||
||**ISOLATION RESISTANCE**<br>rs<br>Iee|I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||
||**EMC EMISSION**<br>Iee|Compliance to EN55015, EN61000-3-2 Class C (load<br>60%) ; EN61000-3-3,GB17743,GB17625.1<br>≧<br>,EAC TP TC 020||
||**EMC IMMUNITY**<br>ee<br>Re|Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:4KV,Line-Line:2KV),EAC TP TC 020||
||**MTBF**<br>Re<br>Re|594.9K hrs min.      MIL-HDBK-217F (25<br>)<br>℃||
||**DIMENSION**<br>Re<br>Re<br>ee|151*53*31.5mm (L*W*H)||
||**PACKING**<br>℃<br>℃<br>℃<br>0.441Kg; 24pcs / 11.6Kg / 0.73CUFT<br>Re<br>ee<br>1. All parametersNOT specially mentioned are measured at230VAC input, rated currentand 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>6. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|||



_File Name:FDL-65-SPEC   2019-01-22_ 

**- FDL 65 series** 

65W Constant Current Mode LED Driver 

## **BLOCK DIAGRAM** 

**==> picture [461 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
PWM fosc : 60~130KHz<br>EMI FILTER POWER RECTIFIERS +V<br>I/P & SWITCHING & -V<br>RECTIFIERS FILTER<br>O.V.P. O.T.P. O.L.P. DETECTION<br>PWM & PFC CIRCUIT<br>CONTROL<br>CASE GROUND<br>**----- End of picture text -----**<br>


## **DRIVING METHODS OF LED MODULE** 

※ This series works in constant current mode to directly drive the LEDs. 

**==> picture [219 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>Constant<br>Current area<br>60<br>(min.)<br>Hiccup<br>Protection<br>50 100 Io(%)<br>Typical output current normalized by rated current (%)<br>Vo(%)<br>**----- End of picture text -----**<br>


In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 

_File Name:FDL-65-SPEC   2019-01-22_ 

**- FDL 65 series** 

65W Constant Current Mode LED Driver 

## **OUTPUT LOAD vs TEMPERATURE** 

**==> picture [504 x 373] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 100<br>80 80<br>60 60<br>40 40<br>20 20<br>-40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 90 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC<br>※ Tcase at 80℃<br>0.98<br>100<br>0.96<br>90<br>0.94<br>80<br>0.92<br>70 0.9<br>277V<br>60 0.88<br>230V<br>0.86<br>50<br>0.84<br>40<br>0.82<br>0.8<br>180 190 200 210 220 230 240 250 260 270 280 295<br>INPUT VOLTAGE (V) 60Hz 60% 70% 80% 90% 100%<br>LOAD<br>LOAD (%) LOAD (%)<br>PF<br>LOAD (%)<br>**----- End of picture text -----**<br>


## **TOTAL HARMONIC DISTORTION (THD)** 

**==> picture [231 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
※ 1800mA Model,Tcase at 80℃<br>25%<br>20%<br>15% 277VAC<br>230VAC<br>10%<br>5%<br>0%<br>60% 70% 80% 90% 100%<br>LOAD<br>THD<br>**----- End of picture text -----**<br>


## **EFFICIENCY vs LOAD** 

**==> picture [242 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
FDL-65 series possess superior working efficiency that up to 90% can<br>be reached in field applications.<br>※ 1800mA Model, Tcase at 80℃<br>91.5<br>91<br>90.5<br>90<br>277V<br>89.5<br>230V<br>89<br>88.5<br>88<br>60% 70% 80% 90% 100%<br>LOAD<br>EFFICIENCY(%)<br>**----- End of picture text -----**<br>


_File Name:FDL-65-SPEC   2019-01-22_ 

**- FDL 65 series** 

## 65W Constant Current Mode LED Driver 

**==> picture [481 x 324] intentionally omitted <==**

**----- Start of picture text -----**<br>
MECHANICAL SPECIFICATION<br>CASE NO.: 246A Unit:mm<br>151<br>142<br>140<br>300±20 127 300±20<br>tc<br>22<br>AC/N(Blue) -V(Blue)<br>AC/L(Brown) +V(Brown)<br>H05RN  1.0mm²*2C 4xψ4.5 H05RN  1.0mm²*2C<br>4xψ7.5<br>�tc : Max. Case Temperature<br>34.29<br>◎ Note: Please connect the case to FG for the complete EMC deliverance.<br>7<br>24.5 43 53<br>31.5<br>12.63<br>**----- End of picture text -----**<br>


## **INSTALLATION MANUAL** 

**==> picture [176 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Please refer to: http://www.meanwell.com/manual.html<br>**----- End of picture text -----**<br>


_File Name:FDL-65-SPEC   2019-01-22_