FCB-205-0224L

CII Mid-Range Relays 

## **FCB-205 Series, 5 Amperes, DPDT** 

## **Product Facts** 

- n **Hermetically Sealed** 

- n **All Welded Construction** 

- n **Balanced Force** 

- n **Permanent Magnet Drive** 

- n **Contacts rated low level to 5 Amps VDC and 115/200 VAC 400 Hz, 3 Phase** 

- n **Weight .54 ounces max. (15.4 grams)** 

- n **Qualified to M83536/1, /2** 

The Series FCB-205 relay increased contact pressure is a polarized single-side in both states over that of stable design, where the a spring return nonpolar flux from a permanent design.  We also magnet provides the manufacture other forms  of armature holding force in the FCB relay: the deactivated state, and **FCB-405** — 5 Amp 4PDT its flux path is switched Relay and combined with the coil flux in the operated state. This results in appreciably 

## **Contact Rating — Amperes Ratings Are Continuous Duty** 

|**Type of**<br>**Load**<br>Resistive|**Life (Min.)**<br>**Cycles x 103**<br>100|**28 VDC**<br>5|**115VAC**<br>**400Hz**<br>5|**115/200VAC**<br>**400Hz, 3Ø**<br>5|
|---|---|---|---|---|
|Inductive|20|3|5|5|
|Motor|100|2|3|3|
|Lamp|100|1|1|1|



*60 Hz loads rated for 10,000 operations 

Low Level Switching Capability:  With contacts operating a load of 10 to 50 microamperes at 10 to 50 millivolts, the contact resistance miss detection level shall be 100 ohms max. Cycling rate is 1 to 12 per second, for 100,000 operations. 

**Overload Current** — 20 AMPS DC, 30 AMPS 400Hz 

**Rupture Current** — 25 AMPS DC, 40 AMPS 400Hz 

**Contact Make Bounce** —1.0 MILLISECOND AT NOMINAL VOLTAGE 

**Max. Contact Drop at 5 Amps** — INITIAL 0.100 VOLTS **End of Life** — 0.125 VOLTS 

## **General Specifications** 

**Temperature Rating** — -70˚C TO + 125˚C **Altitude** — 300,000 Feet **Shock*** — Z, Y, & X Enclosures — 200 g for 6 mS W & M Enclosures (Stud Mtg.) — 100 g for 6 mS 

T Enclosure (Socket Mounted in Track) — 50 g for 11 mS 

**Vibration, Sinusoidal*** — Z, Y, & X Enclosures — 

0.12 DA 10 to 70 Hz, 30 g 70-3000Hz W & M Enclosures (Stud Mtg.) — 0.12 DA 10 to 57 Hz, 20 g 57-3000Hz T Enclosure (Socket Mounted in Track) — 0.06 DA 10 to 57 Hz, 10 g 57 to 500Hz, 20 g 500 to 3000 Hz 

**Vibration, Random*** — Z, Y, & X Enclosures — 0.4 g[2] /Hz 50-2000Hz T, W & M Enclosures — 0.2 g[2] /Hz 50-2000Hz 

**Dielectric Strength** — At Sea Level — 

All circuits to ground and circuit to circuit — 1000 V rms Coil to ground — 1000 V rms At 80,000 Feet — 250 V rms 

**Insulation Resistance** — Initial (500 VDC) — 100 MΩ Min. After Life or Environmental Tests — 50 MΩ Min. 

**Operate Time at Nominal Voltage** — 4 ms or less 

**Release Time at Nominal Voltage** — 4 ms or less 

* Max. contact opening under vibration or shock 10 microseconds 

## **Coil Data** 

|**Coil Data**|||||||
|---|---|---|---|---|---|---|
|**Coil**<br>**Code**|**Nominal**<br>**Voltages**|**Freq.**<br>**Hz**|**DC Res.**<br>**(B)**|**Over Tem**<br>**Pickup or**<br>**Below Volts**|**Over Temperature Ran**<br>**Dropout or**<br>**Above Volts**|**erature Range**<br>**Must Hold**<br>**Voltage (C)**|
|1|6|DC|20Ω|4.5|0.3|2.5|
|2|12|DC|95Ω|9.0|0.75|4.5|
|3|28|DC|500Ω|18.0|1.5|7.0|
|4(A)|28|DC|500Ω|18.0|1.5|7.0|
|5|48|DC|1600Ω|36.0|2.5|14.0|



- A.  CODE 4 COILS HAVE BACK EMF SUPPRESSION TO 42 VOLTS MAX. 

- B.  DC COIL RESISTANCE ± 10% AT 25˚C 

- C.  RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. 

- D.  MAX. OVERVOLTAGE: 6 & 12 VDC COILS 120% OF NOMINAL; ALL OTHERS 110% OF NOMINAL. 

5–6 Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for reference purposes only. Specifications subject to change. 

Dimensions are in millimeters unless otherwise specified. 

For additional support numbers please visit www.te.com 

www.te.com 

CII Mid-Range Relays 

## **FCB-205 Series, 5 Amperes, DPDT** (Continued) 

Below are shown the standard terminal types and the enclosures available.  Specify the assembly as indicated under How To Order.  Dimensions are shown in inches ± .010 and (Millimeters ± .25). 

## **Terminals** 

**==> picture [498 x 580] intentionally omitted <==**

**----- Start of picture text -----**<br>
Socket Pin Terminals Solder Pin Terminals Solder Hook Terminals<br>CODE  CODE  CODE<br>"A" Socket  Pins Gold Plated. Polarizing "B" All Terminals Tin/Lead  Plated "C" Hook Terminals Tin/Lead  Plated<br>pin tin/lead plated<br>.170 . 050 ± .005 .170<br>(1.27 ± (.13)<br>(4.32) Silicone (4.32)<br>t Rubber<br>Gasket<br>.200 .200<br>(5.08) (5.08)<br>smec .050 ± .002(1.27 ± .05) ti| .050 ± .002(1.27 ± .05) c .210 (5.33) Tay .065 DIA(1.65)<br>polarizing pin polarizing pin .040 ± .002 Dia Pin<br>-X2 -X2 ( 1.02 ± .02)<br>8 Places<br>C\O © O ©Or1\© O -X2<br>+X1 +X1 .040 ± .002 Dia Pin<br>BLUE BEAD .040 ± .001 Dia Pin BLUE BEAD (1.02 ± .02) +X1<br>(1.02 ± .02)8 Places 8 Places BLUE BEAD<br>CODE  90˚ Solder Pins CODE  CODE<br>"H" All Pins Bright Acid Tin/lead "Z" "Y"<br>.150± .015 .640 Max.<br>(3.81) (16.26) .640 Max<br>(16.26)<br>.156 .810 Max. .025<br>@)a .150(3.81) : Lo L .810 Max. | 4 PLCSFULL R ylf (3.96) e (20.57) 1.078 Ly (.64)<br>(20.57) (27.38) .133<br>een —_ 1.062 = (3.38)<br>S D R ea . 040± .020 R Typ. AL .410 Max. i | (26.92) —| |<br>(3.81).150.040 ± .001 Dia PinBLUE BEAD to .150± .015(3.81) .210(5.33) (10.41) [ | J | (10.4).410 Max. _ (.3127.92)<br>(1.02 ± .02) 1.280 Max.<br>8 Places | Po (32.57)<br>Enclosures CODE  CODE<br>"W" "T"<br>All Enclosures have Cupro-Nickel Cans M83536/2-028<br>bright acid tin/lead plated after assembly<br>.810 Max. (REFERENCE ONLY)<br>to terminal headers.<br>(20.57)<br>feo<br>Dimensions: Inches ± .010 (mm ± .25) .410 Max.<br>Enclosure "T" is for use with track (10.41) .080 ±.005<br>(2.03 ± .13)<br>mounted sockets and requires socket pin .500 .158 ±.005 **<br>terminals, but no gasket.  The gasket is .172 (12.7) .640 Max. (4.01 ± .13)<br>included in the socket assembly. (4.37) |a (16.26) _lr<br>CODE "X" (7.92).312 (3.58).141 (.1333.38) 4-40 UNC-2A2 Studs * ate .375(9.52) | (20.57) .810 Max. .055 ±.005<br>.693 Max. . 032 (1.38 ± .13)<br>(16.26).640 Max .320 (17.6) (.79) .410 Max.<br>(8.13) (10.41)<br>4 PLCSFULL R pe .810 Max. (20.57) 1.062 fo == .055 ±.005(1.38 ± .13) .110 ±.005(2.79 ± .13)<br>r (26,92) a *Metric threads available,To specify use  M  in place of  W O O<br>1.078 NOTE:  FOR USE WITH TRACK MOUNT PER<br>Los (27.38) MIL-R-6106/23<br>.410 Max. ** MEASURED FROM SURFACE OF HEADER<br>(10.4)<br>1.280 Max. .025<br>fh (32.51) (.64)<br>**----- End of picture text -----**<br>


**5** 

5–7 

Catalog 5-1773450-5 Dimensions are shown for Revised 3-13 reference purposes only. Specifications subject www.te.com to change. 

Dimensions are in millimeters USA: +1 800 522 6752 unless otherwise specified. Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

For additional support numbers please visit www.te.com 

www.te.com 

CII Mid-Range Relays 

## **FCB-205 Series, 5 Amperes, DPDT** (Continued) 

## **Terminal Wiring** 

## **DC Coils** 

## **Transient Suppression** 

**==> picture [117 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
POLARIZING<br>PIN<br>3 X2 - 2 1<br>B<br>+<br>A<br>X1 +<br>BLUE BEAD<br>|<br>**----- End of picture text -----**<br>


**==> picture [117 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
POLARIZING<br>PIN<br>3 X2 - 2 1<br>B<br>+<br>A<br>X1 +<br>BLUE BEAD<br>e l<br>**----- End of picture text -----**<br>


**NOTE:** Polarity must be observed with DC coil supply. Relay is polarized with a permanent magnet and will not operate or be damaged by reverse polarity. 

Diodes used in transient suppression and in AC rectifier circuits have peak inverse voltage rating of 600 VDC minimum.  Zener diodes have a minimum rating of 1 watt. 

Terminal designations are for reference only and do not appear on the header. 

**==> picture [143 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
.150 Typ .075<br>(3.81) ( 1.90) P olarizing Pin<br>3 -X2 2 1<br>B<br>A<br>.075 +X1 Blue Bead<br>(1.90) res .150 Typ )<br>( 3.81)<br>TERMINAL VIEW<br>**----- End of picture text -----**<br>


## **HOW TO ORDER** 

**FCB-205-A  Y  4** 

**RELAY TYPE TERMINALS** (Socket Pins) **ENCLOSURE** (With Flanges) **COIL** (28 VDC With Transient Suppression). ~~——|~~ 

**ENCLOSURE** (With Flanges) 

***** The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 

5–8 

Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for Dimensions are in millimeters reference purposes only. unless otherwise specified. Specifications subject to change. 

For additional support numbers please visit www.te.com 

www.te.com