EX-BNS180-12Z-2187-2-3G/D-10M

## **DATASHEET** 

## **EX-BNS 180-12Z-2187-2-3G/D 10,0M** 

- Explosion protection for ATEX Zones 2 and 22 Thermoplastic enclosure Ø M18 

- Particularly large switching distance 

- Insensitive to transverse misalignment Suitable for food processing industry only in combination with BP 15 SS 

- no mechanical wear 

## **Data** 

## **Ordering data** 

Product type description EX-BNS 180-12Z-2187-2-3G/D 10,0M Article number (order number) 101208353 EAN (European Article Number) 4030661379913 eCl@ss number, version 11.0 27-27-24-02 eCl@ss number, version 9.0 27-27-24-02 ETIM number, version 7.0 EC002544 ETIM number, version 6.0 EC002544 

## **Explosion protection** 

Explosion protection: regulations 

EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 

Explosion protection zones 

2 22 

Explosion protection category 

3G 3D 

Explosion protection designation 

- DD II 3G Ex nC IIC T6 Gc X DD II 3D Ex tc IIIC T80°C Dc X 

Manufacturer declaration 

ATEX Zone 2 and 22 

## **General data** 

Standards BG-GS-ET-14 EN IEC 60947-5-3 Housing construction form Cylinder, thread Installation conditions (mechanical) quasi-flush Housing material Glass-fibre, reinforced thermoplastic Gross weight 401 g 

## **General data - Features** 

Short circuit detection Yes Cross-circuit detection Yes Number of normally closed (NC) 2 Number of normally open (NO) 1 Number of safety contacts 2 Number of cable wires 6 

## **Safety classification** 

Standards EN ISO 13849-1 Mission time 20 Year(s) 

## **Safety classification - Safety outputs** 

B10D- Value Normally-closed 25,000,000 Operations contact/Normally open contact (NC/NO) 

## **Mechanical data** 

Active area front side Actuating element Magnet 

Switching distance actuator Actuating magnet BP 6, Sao: 8 mm Actuating magnet BP 6, Sar: 20 mm Actuating magnet BP 8, Sao: 8 mm Actuating magnet BP 8, Sar: 20 mm Actuating magnet BP 10, Sao: 18 mm Actuating magnet BP 10, Sar: 28 mm Actuating magnet BP 15 SS, Sao: 18 mm Actuating magnet BP 15 SS, Sar: 28 mm Impact energy, maximum 2 J Direction of motion Head-on to the active surface 

**Mechanical data - Switching distances according EN IEC 60947-5-3** Assured switching distance "ON" Sao 18 mm 8 mm Assured switching distance "OFF" Sar 22 mm 32 mm 

**Mechanical data - Connection technique** Length of cable 10 m Termination Cable Wire cross-section 0.25 mm[2] Wire cross-section 23 AWG Material of the Cable mantle PVC 

|**Mechanical data - Dimensions**||
|---|---|
|ISO thread of the sensor|M18|
|Length of sensor|36 mm|



|**Ambient conditions**||
|---|---|
|Degree of protection|IP67|
|Ambient temperature|-25 ... +70 °C|
|Storage and transport temperature,|-25 °C|
|minimum||
|Storage and transport temperature,|+70 °C|
|maximum||



Resistance to vibrations 10 … 55 Hz, amplitude 1 mm 

Restistance to shock 30 g / 11 ms 

## **Electrical data** 

Switching voltage, maximum 120 VAC Switching voltage, maximum 120 VDC Switching current, maximum 0.25 A Switching capacity, maximum 5 W Switching frequency, maximum 5 Hz 

## **Scope of delivery** 

Scope of delivery Actuator must be ordered separately. 

## **Accessory** 

Recommendation (actuator) BP 10 BP 8 BP 6 BP 15 SS Recommended safety switchgear SRB-E-301ST SRB-E-201LC 

## **Note** 

Note (General) Contact symbols shown for the closed condition of the guard device. The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN ISO 14119) 

## **Pictures** 

## **Product picture (catalogue individual photo)** 

ID: kexbnf05 | 169.0 kB | .jpg | 130.881 x 263.172 mm - 371 x 746 px - 72 dpi | 68.4 kB | .png | 74.083 x 148.872 mm - 210 x 422 px - 72 dpi | 30.0 kB | .jpg | 61.383 x 123.472 mm - 174 x 350 px - 72 dpi 

## **Dimensional drawing basic component** 

ID: 1bns1g02 | 31.2 kB | .cdr | | 5.6 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi | 67.5 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi 

## **Diagram** 

ID: k2o1sk07 | 26.0 kB | .cdr | | 82.8 kB | .jpg | 352.778 x 125.589 mm - 1000 x 356 px - 72 dpi | 3.5 kB | .png | 74.083 x 26.458 mm - 210 x 75 px - 72 dpi 

## **Characteristic curve** 

## ID: 1bns1a09 

| 22.8 kB | .png | 74.083 x 51.153 mm - 210 x 145 px - 72 dpi | 147.9 kB | .jpg | 352.778 x 243.769 mm - 1000 x 691 px - 72 dpi 

## Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern 

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible. Generated on: 05/02/2024, 08:58