EX-13EB-PN

Ultra-slim Photoelectric Sensor Amplifier Built-in **EX-10 SERIES Ver.2** 

319 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS ~~a~~ MICRO PHOTOELECTRIC SENSORS AREA SENSORS ~~=~~ LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS PLC / TERMINALS HUMAN MACHINE ~~ee~~ ENERGY CONSUMPTION INTERFACES VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Related Information 

**■** General terms and conditions ........... F-17 | Glossary of terms / General precautions ...... P.1359~ / P.1405 

- Sensor selection guide .................. P.283~ 

- **■** Korea’s S-mark ............................. P.1410 

## **Ver.2** [| 

**==> picture [165 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
panasonic-electric-works.net/sunx<br>**----- End of picture text -----**<br>


**==> picture [105 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Conforming toEMC Directive Recognition<br>(Excluding  EX-15□/17□ )<br>Certified<br>(Some models only)<br>**----- End of picture text -----**<br>


PNP output type available 

## **Amplifier built-in extraordinarily small and slim size** 

## **Smallest body, just 3.5 mm 0.138 in thick** 

It can be mounted in a very small space as its size is just W10 × H14.5 × D3.5 mm W0.394 × H0.571 × D0.138 in (thru-beam, front sensing type). 

## **Flexible mounting** 

The diffuse reflective type sensor is front sensing and is so thin that it gives an impression of being just pasted on the mounting base. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting. 

## Diffuse reflective 

Thru-beam 

**==> picture [227 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• Front sensing type  • Side sensing type  • Front sensing type<br>**----- End of picture text -----**<br>


## **BASIC PERFORMANCE** 

## **Electric power saving *** 

## **High-speed response time: 0.5 ms** 

The sensor is suitable for detecting small and high- 

The **EX-10** series achieves reductions in power consumption of up to 65 %. These sensors contribute to speed traveling objects. environmental friendliness. 

* Effective from production in October 2010. 

A maximum **35 %** reduction compared to conventional sensors 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

320 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**==> picture [469 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
a APPLICATIONS<br>**----- End of picture text -----**<br>


**==> picture [456 x 284] intentionally omitted <==**

**----- Start of picture text -----**<br>
Verifying position of PCBs Detecting ICs Detecting PCB rack<br>2S Z Z : S<br>UE LEZt<br>EX-19□<br>Transparent stick<br>IC EX-15□<br>4 a <™<br>EX-14□<br>Detecting wafer cassette Detecting thin ring Checking for absence of capacitor in tray<br>EX-14□<br>4 es o><br>‘al ,<br>EX-13E□<br>Guide<br>EX-14□<br>**----- End of picture text -----**<br>


## ~~eee~~ **BASIC PERFORMANCE** 

**Minimum sensing object: ø1 mm ø0.039 in EX-11** ( **E** ) **□** , **EX-15** ( **E** ) **□** 

**Long sensing range: 1 m 3.281 ft EX-19□** A sensing range of 1 m 3.281 ft has been realized with a slim size of just 3.5 ~~ee~~ **1 m** mm 0.138 in. It can be used **3.281 ft** to detect even wide IC trays. 

**EX-11□** , **EX-11E□** , **EX-15** and **EX-15E** are incorporated with ø1 mm ø0.039 in slit masks so that ø1 mm ø0.039 in, or more, object can be detected. Hence, they are suitable for precise positioning or small parts detection. 

**EX-14□** 

## **Background suppression** 

## **Hardly affected by background** 

## **Black object reliably detected** 

It can reliably detect dark The best distance is approx. 10 mm color objects since it is 0.394 in from the a object. convergent reflective type. 

Even a specular background separated by 100 mm 3.937 in, or more, is not detected. Background mM Ih; Ih 100 mm (However, the background 3.937 in should be directly opposite. L SK A spherical or curved background may be ~~j~~ A> detected.) <7 % 

## ~~eee~~ **ENVIRONMENTAL RESISTANCE** 

## **Waterproof IP67** 

## **Incorporated an inverter countermeasure circuit *** 

The sensor can be hosed down because of its IP67 construction and the non-corrosive stainless steel mounting bracket. 

The **EX-10** series become significantly stronger Fluorescent light tube against inverter light and A ‘' other extraneous light. 

Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself. 

- Effective from production in October 2010. 

**EX-□-R** 

## **Bending durability** 

FIBER SENSORS 

LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS 

PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

**CX-400 EX-10 EX-20 EX-30 EX-40** 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Flexible cable type **EX-□-R** is available. It is most suitable for moving parts, such as robot arm, etc. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

321 

~~e~~ FIBER **MOUNTING / SIZE** ~~e~~ SENSORS LASER **Mountable with M3 screws** SENSORS PHOTOELECTRIC Non-corrosive stainless steel type mounting bracket is also available. SENSORS ~~a~~ **• MS-EX10-1 • MS-EX10-2 • MS-EX10-3** MICRO [Cold rolled carbon steel (SPCC)] [Cold rolled carbon steel (SPCC)] [Cold rolled carbon steel (SPCC)] PHOTOELECTRIC SENSORS **MS-EX10-11 MS-EX10-12 MS-EX10-13** AREA [Stainless steel (SUS304)] [Stainless steel (SUS304)] [Stainless steel (SUS304)] SENSORS mounting bracket for the front mounting bracket for the side (L-shaped mounting bracket) ~~—_~~ LIGHT _ [ sensing type ( sensing type ) CURTAINS PRESSURE / M3 screws FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR M3 screws USE SENSORS M3 screws ~~oe~~ SENSOR Rk OPTIONS SIMPLE WIRE-SAVING **Red beam makes beam alignment easy** UNITS WIRE-SAVING The red LED beam projected from the emitter helps you SYSTEMS to align the sensor heads. MEASUREMENT SENSORS ~~OO~~ STATIC CONTROL ~~i~~ **FUNCTIONS** ~~|~~ **VARIETIES** ~~e~~ DEVICES **Bright 2-color indicator Operation mode switch EX-15□/17□** ENDOSCOPE A convenient 2-color Thru-beam type sensor incorporated with an operation MARKERSLASER indicator has been mode switch on the bifurcation is also available. It helps incorporated in the you to test the operability before start-up. TERMINALSPLC / miniature body. HUMAN MACHINE INTERFACES 2-color indicator 2-color indicator ENERGY CONSUMPTION Orange: Operation indicator Red: Operation indicator VISUALIZATION Green: Stability indicator Green: Stability indicator ~~—~~ COMPONENTS | | Operation mode switch > FA COMPONENTS Even for the thru-beam Operation indicator type sensor, only three MACHINE VISION (Orange) wires have to be connected. SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated **CX-400 EX-10** ~~La~~ **EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

## **OTHERS** 

## **Less resources used *** 

Based on environmental considerations, simplified packaging is used in order to reduce waste. In addition, the bag is made from polyethylene which produces no toxic gases even when burned. 

*  Effective from production in October 2010. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

322 

**==> picture [546 x 551] intentionally omitted <==**

**----- Start of picture text -----**<br>
ORDER GUIDE FIBER<br>SENSORS<br>LASER<br>SENSORS<br>Model No. Output<br>Type Appearance Sensing range (Note 2) operation Output PHOTO-ELECTRIC<br>SENSORS<br>EX-11A Light-ON MICRO<br>150 mm 5.906 in PHOTO-<br>EX-11B Dark-ON ELECTRICSENSORS<br>500 mm EX-13A Light-ON AREASENSORS<br>19.685 in<br>EX-13B Dark-ON<br>LIGHT<br>1 m EX-19A Light-ON CURTAINS<br>3.281 ft EX-19B Dark-ON PRESSURE / FLOW<br>SENSORS<br>150 mm 5.906 in EX-15 Switchable either  INDUCTIVEPROXIMITYSENSORS<br>Light-ON or<br>500 mm19.685 in EX-17 Dark-ON PARTICULARUSE SENSORS<br>SENSOR<br>EX-11EA Light-ON NPN open-collector  OPTIONS<br>150 mm 5.906 in transistor<br>EX-11EB Dark-ON SIMPLE<br>WIRE-SAVING<br>UNITS<br>500 mm EX-13EA Light-ON<br>19.685 in WIRE-SAVING<br>EX-13EB Dark-ON SYSTEMS<br>MEASURE-<br>150 mm 5.906 in EX-15E MENT<br>Switchable either  SENSORS<br>Light-ON or  STATIC<br>500 mm19.685 in EX-17E Dark-ON CONTROLDEVICES<br>ENDOSCOPE<br>EX-14A Light-ON<br>LASER<br>2 to 25 mm 0.079 to 0.984 in (Note 1) MARKERS<br>(Convergent point: 10 mm 0.394 in) EX-14B Dark-ON PLC /<br>TERMINALS<br>EX-11A-PN Light-ON HUMAN<br>150 mm 5.906 in MACHINE<br>EX-11B-PN Dark-ON INTERFACES<br>ENERGY<br>500 mm EX-13A-PN Light-ON CONSUMPTION VISUALIZATION<br>19.685 in COMPONENTS<br>EX-13B-PN Dark-ON FA<br>COMPONENTS<br>1 m EX-19A-PN Light-ON<br>3.281 ft EX-19B-PN Dark-ON MACHINE VISION<br>SYSTEMS<br>EX-11EA-PN Light-ON PNP open-collector  UV<br>150 mm 5.906 in EX-11EB-PN Dark-ON transistor CURING SYSTEMS<br>500 mm EX-13EA-PN Light-ON<br>19.685 in<br>EX-13EB-PN Dark-ON<br>Selection<br>Guide<br>EX-14A-PN Light-ON Amplifier<br>Built-in<br>2 to 25 mm 0.079 to 0.984 in (Note 1) Power Supply<br>Built-in<br>(Convergent point: 10 mm 0.394 in) EX-14B-PN Dark-ON Amplifier-<br>separated<br>Front sensing<br>With operation mode switch on the bifurcation<br>Thru-beam<br>NPN output<br>Side sensing<br>With operation mode switch on the bifurcation<br>Convergent reflective (Diffused beam type) Front sensing<br>Front sensing<br>Thru-beam<br>PNP output<br>Side sensing<br>Convergent reflective (Diffused beam type) Front sensing<br>**----- End of picture text -----**<br>


NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets (six types). 

Notes: 1) The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should be directly opposite. A spherical or curved background may be detected.) 

- 2) The model No. with  “ **P** ” shown on the label affixed to the thru-beam type sensor is the emitter, “ **D** ” shown on the label is the receiver. (e.g.) Emitter of **EX-11A** : **EX-11P** , Receiver of **EX-11A** : **EX-11AD** 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

323 

FIBER SENSORS 

LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

LIGHT CURTAINS PRESSURE / FLOW SENSORS 

INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

**RT-610** 

## **ORDER GUIDE** 

## **Flexible cable type** 

Flexible cable type is also available for NPN output type. (excluding sensor with operation mode switch on the bifurcation **EX-15□/17□** ) When ordering this type, suffix “ **-R** ” to the model No. 

(e.g.) Flexible cable type of **EX-11A** is “ **EX-11A-R** ”. 

## **5 m 16.404 ft cable length type** 

5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) is also available for NPN output type. (excluding flexible cable type) When ordering this type, suffix “ **-C5** ” to the model No. 

(e.g.) 5 m 16.404 ft cable length type of **EX-11A** is “ **EX-11A-C5** ”. 

## **OPTIONS** 

**==> picture [330 x 385] intentionally omitted <==**

**----- Start of picture text -----**<br>
Designation Model No. Description<br>Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]<br>MS-EX10-1<br>(The thru-beam type sensor needs two brackets.)<br>Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]<br>MS-EX10-2<br>(The thru-beam type sensor needs two brackets.)<br>L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]<br>MS-EX10-3<br>(The thru-beam type sensor needs two brackets.)<br>Sensor mounting<br>bracket<br>Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)]<br>MS-EX10-11<br>(The thru-beam type sensor needs two brackets.)<br>Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)]<br>MS-EX10-12<br>(The thru-beam type sensor needs two brackets.)<br>L-shaped mounting bracket [Stainless steel (SUS304)]<br>MS-EX10-13<br>(The thru-beam type sensor needs two brackets.)<br>• Sensing range: 600 mm 23.622 in [ EX-19□ ]<br>Slit on one side 250 mm 9.843 in [ EX-13□ ,  EX-17□ ]<br>• Min. sensing object: ø2 mm ø0.079 in<br>OS-EX10-12<br>(Slit size ø1.2 mm ø0.047 in) • Sensing range: 400 mm 15.748 in [ EX-19□ ]<br>Slit on both sides 200 mm 7.874 in [ EX-13□ ,  EX-17□ ]<br>• Min. sensing object: ø1.2 mm ø0.047 in<br>• Sensing range: 800 mm 31.496 in [ EX-19□ ]<br>Slit on one side 350 mm 13.780 in [ EX-13□ ]<br>Slit mask • Min. sensing object: ø2 mm ø0.079 in<br>OS-EX10-15<br>(Slit size ø1.5 mm ø0.059 in) • Sensing range: 500 mm 19.685 in [ EX-19□ ]<br>Slit on both sides 300 mm 11.811 in [ EX-13□ ]<br>• Min. sensing object: ø1.5 mm ø0.059 in<br>Slit on one side • Sensing range: 250 mm 9.843 in [ EX-13E□ ,  EX-17E□ ]<br>OS-EX10E-12 • Min. sensing object: ø2 mm ø0.079 in<br>(Slit size ø1.2 mm ø0.047 in) Slit on both sides • Sensing range: 200 mm 7.874 in [ EX-13E□ ,  EX-17E□ ]<br>• Min. sensing object: ø1.2 mm ø0.047 in<br>Sensor checker  It is useful for beam alignment of thru-beam type sensors. The optimum<br>CHX-SC2<br>(Note) receiver position is given by indicators, as well as an audio signal.<br>Mounting screws with washers (50 pcs. lot). It can mount<br>Mounting screw MS-M2<br>securely as it is spring washer attached.<br>**----- End of picture text -----**<br>


## **Sensor mounting bracket** 

**• MS-EX10-1 • MS-EX10-11** Material: Cold rolled Material: Stainless carbon steel (SPCC) steel (SUS304) (Uni-chrome plated) Two M2 (length 4 mm Two M2 (length 4 mm 0.157 in) pan head 0.157 in) pan head screws [stainless screws are attached. steel (SUS304)] are attached. 

## **• MS-EX10-2 • MS-EX10-12** 

**==> picture [55 x 76] intentionally omitted <==**

**==> picture [52 x 75] intentionally omitted <==**

Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M2 (length 8 mm 0.315 in) pan head screws are attached. 

Material: Stainless steel (SUS304) Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. 

**• MS-EX10-3 • MS-EX10-13 Sensor checker • CHX-SC2** Material: Cold rolled Material: Stainless steel carbon steel (SPCC) (SUS304) (Uni-chrome plated) Two M2 (length 4 mm Two M2 (length 4 mm 0.157 in) pan head 0.157 in) pan head screws [stainless screws, and two M2 steel (SUS304)] and Sensor checker (length 8 mm 0.315 in) two M2 (length 8 mm pan head screws are 0.315 in) pan head attached. screws [stainless steel (SUS304)] are attached. 

Note: Refer to the sensor checker **CHX-SC2** pages for details. 

## **Sensor checker** 

## **Slit mask** 

Example of mounting ( **OS-EX10E-12** ) 

**• CHX-SC2** 

**• OS-EX10-12 • OS-EX10E-12 • OS-EX10-15** 

**==> picture [61 x 56] intentionally omitted <==**

Tighten along with the sensor mounting bracket. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

324 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS 

PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400** 

**EX-10 EX-20 EX-30 EX-40** 

**CX-440** 

**EQ-30 EQ-500 MQ-W RX-LS200** 

**RX** 

## **SPECIFICATIONS** 

**==> picture [504 x 649] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type Thru-beam Convergent reflective(Diffused beam type) [Thru-beam · with operation mode switch on bifurcation]<br>Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensing<br>Model No. Light-ON EX-11A ( -PN ) EX-11EA ( -PN ) EX-13A ( -PN ) EX-13EA ( -PN ) EX-19A ( -PN ) EX-14A ( -PN ) EX-15  EX-15E  EX-17 EX-17E<br>Item (Note 2) Dark-ON EX-11B ( -PN ) EX-11EB ( -PN ) EX-13B ( -PN ) EX-13EB ( -PN ) EX-19B ( -PN ) EX-14B ( -PN ) (Note 3) (Note 3) (Note 3) (Note 3)<br>2 to 25 mm 0.079<br>Sensing range 150 mm 5.906 in 500 mm 19.685 in 1 m 3.281 ft to 0.984 in (Note 4) 150 mm 5.906 in 500 mm 19.685 in<br>(Conv. point: 10 mm 0.394 in)<br>ø1 mm ø0.039 in opaque object ø2 mm ø0.079 in opaque object ø2 mm ø0.079 in ø0.1 mm ø0.004  ø1 mm ø0.039 in opaque object ø2 mm ø0.079 in opaque object<br>(Completely beam interrupted object) (Completely beam interrupted object) opaque object in copper wire (Completely beam interrupted object) (Completely beam interrupted object)<br>Setting distance  Setting distance  Completely beam  Completely beam  Setting distance  Setting distance<br>Min. sensing object between emitter  between emitter  interrupted object interrupted object between emitter  between emitter<br>and receiver:   and receiver:   Setting distance between  and receiver:  and receiver:<br>150 mm 5.906 in 500 mm 19.685 in emitter and receiver:  Setting distance:  150 mm 5.906 in 500 mm 19.685 in<br>1 m 3.281 ft 10 mm 0.394 in<br>– 15 % or less of operation  –<br>Hysteresis<br>distance (Note 4)<br>Repeatability (perpendicular to sensing axis) 0.05 mm 0.002 in or less 0.1 mm 0.004 in or less 0.05 mm 0.002 in or less<br>Supply voltage 12 to 24 V DC ±10 %  Ripple P-P 10 % or less<br>Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less 13 mA or less 25 mA or less<br><NPN output type> <PNP output type> NPN open-collector transistor<br>NPN open-collector transistor PNP open-collector transistor • Maximum sink current: 100 mA<br>• Maximum sink current: 50 mA • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V)<br>Output<br>• Applied voltage: 30 V DC or less (between output and 0 V) • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less<br>• Residual voltage: 2 V or less (at 50 mA sink current) • Residual voltage: 2 V or less (at 50 mA source current) (at 100 mA sink current)<br>1 V or less (at 16 mA sink current) 1 V or less (at 16 mA source current) 1 V or less (at 16 mA sink current)<br>Utilization category DC-12 or DC-13 –<br>Short-circuit protection Incorporated<br>Response time 0.5 ms or less<br>Operation indicator Orange LED (lights up when the output is ON) Orange LED (lights up when the output is ON), located on the bifurcation<br>Incident beam indicator – Red LED (lights up under light received condition),<br>located on the receiver<br>Green LED Green LED (lights up under stable light received<br>Stability indicator condition or stable dark condition), located on the<br>(lights up under stable light received condition or stable dark condition) receiver<br>Pollution degree 3 (Industrial environment) –<br>Protection IP67 (IEC)<br>Ambient temperature −25 to +55 °C −13 to +131 °F (No dew condensation or icing allowed), Storage: −30 to +70 °C −22 to +158 °F<br>Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH<br>Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face<br>EMC EN 60947-5-2 –<br>Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure<br>Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure<br>Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each<br>Shock resistance 500 m/s [2]  acceleration (50 G approx.) in X, Y and Z directions for three times each<br>Emitting element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)<br>Material Enclosure: Polyethylene terephthalate Enclosure: Polyethylene terephthalate<br>Lens: Polyalylate Lens: Polyalylate, Bifurcation: Polyalylate<br>0.1 mm [2]  3-core (thru-beam type emitter: 2-core) cabtyre cable,   0.2 mm [2]  3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation;<br>Cable (Note 5) 2 m 6.562 ft long from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)<br>Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm [2] , or more, cable (thru-beam type: emitter and receiver). Extension up to total 100 m 328 ft is possible with 0.3 mm [2] , or more, cable.<br>Net weight (each emitter and receiver): 20 g approx., Net weight: 20 g approx.<br>Weight Gross weight: 60 g approx. Gross weight: 40 g approx. [Net weight: 55 g approx., Gross weight: 80 g approx.]<br>Accessories Mounting screws: 1 set Mounting screws: 1 set Mounting screws: 1 set, Adjusting screwdriver: 1 pc.<br>Environmental resistance<br>**----- End of picture text -----**<br>


Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 

- 2) Model Nos. having the suffix “ **-PN** ” are PNP output type. 

- 3) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation). 

- 4) The sensing range and the hysteresis of convergent reflective type sensor are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object. 5) The flexible cable type (model Nos. having suffix “ **-R** ”) has a 0.1 mm[2] 3-core (thru-beam type emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long. 

**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

325 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

LIGHT CURTAINS 

PRESSURE / FLOW SENSORS 

INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS 

STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS PLC / TERMINALS 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

## **I/O CIRCUIT AND WIRING DIAGRAMS** 

## **EX-11□  EX-13□  EX-19□  EX-14□** 

NPN output type 

## **I/O circuit diagram** 

## **Wiring diagram** 

**==> picture [447 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>D1 (Brown) +V<br>(Black)  Load  Brown<br>D2 Output (Note)  +  12 to 24 V DC<br>−  ±10 % Load<br>Tr  ZD 50 mA  max.  Black (Note)  +  12 to 24 V DC<br>(Blue) 0 V  −  ±10 %<br>Blue<br>Internal circuit  Users’ circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


Note: The emitter of the thru-beam type sensor does not incorporate the black wire. 

Note: The emitter of the thru-beam type sensor does not incorporate the output. 

Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor 

## **EX-11□-PN  EX-13□-PN  EX-19□-PN  EX-14□-PN** 

## **I/O circuit diagram** 

## **Wiring diagram** 

PNP output type 

**==> picture [446 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>(Brown) +V<br>ZD 50 mA  max.  +  12 to 24 V DC Brown<br>Tr  D2 (Black) Output (Note)  −  ±10 %<br>Load  Black (Note)  +  12 to 24 V DC<br>D1 (Blue) 0 V  −  ±10 %<br>Load<br>Blue<br>Internal circuit  Users’ circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


Note: The emitter of the thru-beam type sensor does not incorporate the output. 

Note: The emitter of the thru-beam type sensor does not incorporate the black wire. 

Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor 

**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

326 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES 

PLC / TERMINALS 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40** 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

## **I/O CIRCUIT AND WIRING DIAGRAMS** 

## **EX-15□  EX-15E□  EX-17□  EX-17E□  EX-17W** 

## **I/O circuit diagram** 

**==> picture [230 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>D1 (Brown) +V<br>Load<br>D2 (Black) Output  +  12 to 24 V DC<br>Tr  ZD 100 mA  max.  − ±10 %<br>(Blue) 0 V<br>Internal circuit  Users’ circuit<br>Symbols … D1: Reverse supply polarity protection diode<br>D2: Reverse output polarity protection diode<br>ZD: Surge absorption zener diode<br>Tr : NPN output transistor<br>Sensor circuit<br>**----- End of picture text -----**<br>


## **SENSING CHARACTERISTICS (TYPICAL)** 

## **All models** 

**==> picture [66 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN output type<br>**----- End of picture text -----**<br>


**==> picture [214 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-15□, EX-15E□, EX-17□, EX-17E□ wiring diagram<br>**----- End of picture text -----**<br>


**==> picture [222 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
Brown<br>Load<br>Black  +   12 to 24 V DC<br>−  ±10 %<br>Blue<br>**----- End of picture text -----**<br>


Thru-beam type 

ENDOSCOPE 

LASER MARKERS 

## **Correlation between setting distance and excess gain** 

**==> picture [253 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 100<br>50 50<br>EX-13□<br>EX-17□ EX-19□<br>10 10<br>5 5<br>EX-11□<br>EX-15□<br>1 1<br>0 200 400 600 800 1,000 0 1 2 3 4 5<br>7.874 15.748 23.622 31.496 39.370 3.281 6.562 9.843 13.123 16.404<br>Setting distance L (mm in) Setting distance L (m ft)<br>Excess gain Excess gain<br>**----- End of picture text -----**<br>


**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

327 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

**RT-610** 

**==> picture [548 x 574] intentionally omitted <==**

**----- Start of picture text -----**<br>
SENSORSFIBER SENSING CHARACTERISTICS (TYPICAL)<br>LASER<br>SENSORS EX-11□  EX-11E□  EX-15□  EX-15E□ Thru-beam type<br>PHOTO-<br>ELECTRICSENSORS Parallel deviation Angular deviation<br>MICRO 200 200<br>PHOTO- 7.874 7.874<br>ELECTRIC<br>SENSORS<br>EX-11 □<br>SENSORSAREA 5.906150 EX-15 □ 5.906150 EX-11 □<br>EX-11E □ EX-15 □<br>CURTAINSLIGHT 3.937100 EX-15EX-11 □□ EX-11EEX-15E □□ 3.937100 EX-15EEX-11E □□<br>Emitter EX-15E □ Emitter<br>PRESSURE /  Emitter Emitter<br>SENSORSFLOW 1.96950 ℓ L ℓ L 1.96950 θ L θ L<br>INDUCTIVE EX-11 □ EX-11E □<br>PROXIMITYSENSORS 0 Receiver Receiver 0 EX-15 □ Receiver Receiver EX-15E □<br>100 50 0 50 100 20 10 0 10 20<br>PARTICULARSENSORSUSE  3.937 Left1.969 Center 1.969Right 3.937 LeftOperating angle θ ( ° )Center Right<br>Operating point ℓ (mm in)<br>SENSOR<br>OPTIONS<br>SIMPLE EX-13□  EX-13E□  EX-17□  EX-17E□ Thru-beam type<br>WIRE-SAVING<br>UNITS Parallel deviation Angular deviation Parallel deviation with slit  Parallel deviation with slit<br>WIRE-SAVING SYSTEMS masks (ø1.2 mm ø0.047 in) masks (ø1.5 mm ø0.059 in)<br>800 800 400 400<br>MEASURE- 31.496 31.496 15.748 EX-13 □ /17 □ 15.748 Slit on one side<br>MENT Slit on one side or both sides<br>SENSORS EX-13 □ /17 □<br>CONTROLSTATIC  23.622600 EX-13EX-17 □□ 23.622600 11.811300 Slit on both sides EX-13E □ /17E □ 11.811300<br>DEVICES EX-13E □ EX-13EX-17 □□ Slit on one side<br>ENDOSCOPE 15.748400 Emitter EX-17E □ Emitter 15.748400 Emitter EX-13EEX-17E □□ 7.874200 EX-13E Slit on both sides□ /17E □ Emitter 7.874200 Slit on one side, sensing range: 350 mm 13.78 in Emitter<br>MARKERSLASER 7.874200 ℓ L ℓ L 7.874200 θ L θEmitterL 3.937100 ℓ L 3.937100 Slit on both sides, sensing range: 300 mm 11.81 in ℓ L<br>TERMINALSPLC / 0 Receiver EX-13EX-17 □□ EX-13EEX-17E □□ Receiver 0 EX-13EX-17 □□ Receiver Receiver EX-13EEX-17E □□ 0 Receiver 0 Receiver<br>100 50 0 50 100 20 10 0 10 20 40 20 0 20 40 100 50 0 50 100<br>INTERFACESMACHINE HUMAN  3.937 LeftOperating point ℓ (mm 1.969 Center 1.969Rightin) 3.937 LeftOperating angle θ ( ° )Center Right 1.575 LeftOperating point ℓ (mm 0.787 Center 0.787Rightin) 1.575 3.937 LeftOperating point ℓ (mm 1.969 Center 1.969Rightin) 3.937<br>ENERGY<br>CONSUMPTION<br>VISUALIZATION<br>COMPONENTS<br>EX-19□ Thru-beam type<br>FA<br>COMPONENTS<br>Parallel deviation Angular deviation Parallel deviation with slit  Parallel deviation with slit<br>MACHINE VISION  masks (ø1.2 mm ø0.047 in) masks (ø1.5 mm ø0.059 in)<br>SYSTEMS<br>800<br>UV  31.496<br>CURING  Slit on one side Slit on one side<br>SYSTEMS<br>1,000 1,000 1,000<br>39.370 39.370 600 39.370<br>23.622<br>Slit on both sides<br>400<br>Selection Guide 500 Emitter 500 Emitter 15.748 Emitter 500 Emitter<br>19.685 19.685 19.685<br>Power Supply Amplifier Built-in ℓ L θ L 7.874200 Slit on both sides ℓ L ℓ L<br>seAmplifier-paratedBuilt-in 0 Receiver 0 Receiver 0 Receiver 0 Receiver<br>200 100 0 100 200 40 20 0 20 40 200 100 0 100 200 200 100 0 100 200<br>7.874 3.937 3.937 7.874 Left Center Right 7.874 3.937 3.937 7.874 7.874 3.937 3.937 7.874<br>Left Center Right Operating angle θ ( ° ) Left Center Right Left Center Right<br>CX-400 Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)<br>)in )in<br>Setting distance L (mm  Setting distance L (mm<br>)in )in )in )in<br>Setting distance L (mm  Setting distance L (mm  Setting distance L (mm  Setting distance L (mm<br>)in )in )in )in<br>Setting distance L (mm  Setting distance L (mm  Setting distance L (mm  Setting distance L (mm<br>**----- End of picture text -----**<br>


**EX-10** 

**EX-20** 

**EX-30** 

**EX-40** 

*Optical properties of side sensing types ( **EX-11E/13E/15E/17E** ) 

Due to the optical properties of side sensing types, note that sensing may be affected if multiple sensors are positioned in such a way that optical axes intersect as shown in the diagram below. 

Emitter 2 Receiver 1 Emitter 1 Receiver 1 ℓ × 2 or more Emitter 1 Receiver 2 Emitter 2 Receiver 2 L 

Beam from Emitter 1 may be caught by Receiver 2. 

There is no problem when sensors are installed in parallel (although the distance between sensors should be ℓ × 2 or more). 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

328 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE 

LASER MARKERS 

PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

## **SENSING CHARACTERISTICS (TYPICAL)** 

**==> picture [509 x 479] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-14□ Convergent reflective type<br>Sensing fields<br>•  Horizontal (left and right) direction •  Vertical (up and down) direction<br>40 40<br>1.575 50 × 50 mm 1.969 × 1.969 in 1.575<br>Non-glossy paper<br>30 30<br>1.181 7 mm ℓ 1.181 50 × 50 mm<br>0.276 in L White 1.969 × 1.969 inNon-glossy paper<br>20 20<br>0.787 White 0.787<br>10 10<br>0.394 0.394 ℓ<br>N4 N4 7.75mm L<br>0.305 in<br>0 0<br>10 5 0 5 10 10 5 0 5 10<br>0.394 0.197 0.197 0.394 0.394 0.197 0.197 0.394<br>Left Center Right Down Center Up<br>Operating point ℓ (mm in) Operating point ℓ (mm in)<br>Correlation between lightness and sensing range Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range<br>40 80<br>1.575 The sensing region (typical) is  3.150 The bars in the graph indicate<br>represented by oblique lines  the sensing range (typical)<br>30 in the left figure. However, the  60 for the respective material.<br>1.181 sensitivity should be set with  2.362 However, there is a slight<br>enough margin because of  variation in the sensing range<br>20 slight variation in products. 40 depending on the product.<br>0.787 Sensing region 1.575 Further, if there is a reflective<br>object (conveyor, etc.) in the<br>0.39410 0.78720 background of the sensing<br>10 object, since it affects the<br>  0 0.3940 sensing, separate it by more<br>DarkN2 N4LightnessN6 N8Light Lightness shown on the left may differ slightly from the  than twice the sensing range shown in the left graph.<br>N1 N2 N3 N4 N5 N6 N7 N8 N9 actual object condition.<br>PRECAUTIONS FOR PROPER USE Refer to General precautions.<br>Operation mode switch<br>• Never use this product as a sensing device  (EX-15□, EX-15E□, EX-17□ and EX-17E□ only)<br>for personnel protection.<br>• In case of using sensing devices for  Operation mode switch<br>personnel protection, use products which  L: Light-ON<br>meet laws and standards, such as OSHA,  D: Dark-ON<br>ANSI or IEC etc., for personnel protection<br>applicable in each region or country. Operation indicator (Orange)<br>)in )in<br>Setting distance L (mm  Setting distance L (mm<br>)in )in<br>Sensing range L (mm  Sensing range L (mm<br>Distance to  convergent point (Hair line)<br>Black circuit board Black rubber sheet IC tray (Black) Glass epoxy printed circuit board (Green masked surface) Ceramic circuit board White non-glossy paper Stainless steel plate Aluminum plate Aluminum-evaporated mirror Distance to convergent point<br>**----- End of picture text -----**<br>


**==> picture [240 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operation mode switch<br>L: Light-ON<br>D: Dark-ON<br>Operation indicator (Orange)<br>Lights up when the output is<br>ON.<br>Switch<br>Description<br>position<br>Light-ON mode is set when the switch is turned fully<br>clockwise (L side).<br>Dark-ON mode is set when the switch is turned fully<br>counterclockwise (D side).<br>**----- End of picture text -----**<br>


## **Mounting** 

- **In case of mounting on tapped holes** (Unit: mm in) 

**==> picture [230 x 71] intentionally omitted <==**

**----- Start of picture text -----**<br>
Side sensing Front sensing<br>Sensing<br>Sensing 11 direction<br>direction 0.433<br>Attached screw 11<br>Attached screw M2 × 0.4 0.016 hole [M2 (length 8 0.315)] 0.433<br>[M2 (length 10 0.394)] tapped, 6 0.157 deep M2 × 0.4 tapped, 7 0.0160.276 hole deep<br>**----- End of picture text -----**<br>


The tightening torque should be 0.2 N·m or less. 

## **Others** 

- **In case of using attached screws and nuts** (Unit: mm in) 

- Do not use during the initial transient time (50 ms) ( **EX-15□** , **EX-15E□** , **EX-17□** , **EX-17E□** : 100 ms) after the power supply is switched on. 

**==> picture [229 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
Side sensing Front sensing<br>Flat washers<br>Sensing<br>11 Sensing direction<br>0.433 direction Nuts<br>Attached screw Spring washers [M2 (length 8 Attached screw0.315)] 0.43311<br>[M2 (length 10 0.394)]<br>Thickness of Thickness of<br>mounting plate: 2 0.079 or less mounting plate: 2.5 0.098 or less<br>**----- End of picture text -----**<br>


- Excess bending of the cable or stress applied to the cable may disconnect the internal lead wire. 

The tightening torque should be 0.2 N·m or less. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

329 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS 

INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS 

PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400** 

**EX-10** 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

**EX-20** 

**EX-30** 

**EX-40** 

## **DIMENSIONS (Unit: mm in)** 

The CAD data in the dimensions can be downloaded from our website. 

## **EX-11A□  EX-11B□  EX-13A□  EX-13B□  EX-19A□  EX-19B□** 

Sensor 

**==> picture [157 x 166] intentionally omitted <==**

**----- Start of picture text -----**<br>
10  Stability<br>0.394  indicator  3.5<br>6.45  (Green)  0.138<br>5.5  0.254  Operation 2.1 0.083<br>0.217  1.75  indicator<br>0.069  (Orange)<br>1.75  1.5<br>0.069  0.059<br>Beam-  4<br>receiving  0.157  11  14.5<br>part  0.433  0.571<br>4.5<br>0.177<br>6.5  2-ø2.2 ø0.087<br>0.256<br>mounting holes<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>**----- End of picture text -----**<br>


**==> picture [162 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.5<br>0.138 10<br>2.1 0.394<br>0.083 5.5<br>0.217<br>1.75 0.069<br>1.75 0.069<br>4<br>0.157<br>14.5 11<br>0.571 0.433<br>4.5 Beam-<br>0.177 emitting<br>part<br>2-ø2.2 ø0.087 6.5<br>mounting holes 0.256<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>Emitter<br>**----- End of picture text -----**<br>


**==> picture [40 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Receiver<br>**----- End of picture text -----**<br>


## **EX-11EA□  EX-11EB□  EX-13EA□  EX-13EB□** 

Sensor 

**==> picture [187 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
Stability<br>indicator (Green)  10<br>Operation 0.394<br>indicator (Orange) 6.45<br>0.254<br>4.5  1.75<br>2.25  0.177  0.069  1.75  1.5<br>0.089  0.069  0.059<br>Beam-  4<br>receiving part  0.157  0.433 11  0.571 14.5<br>4.5<br>0.177<br>6.5  2-ø2.2 ø0.087<br>4.2  0.256  mounting holes<br>0.165<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>Receiver<br>**----- End of picture text -----**<br>


**==> picture [210 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
10<br>0.394 4.5<br>1.75 0.069 0.177<br>2.25<br>1.75 0.069 0.089<br>4 Beam-<br>14.5 11 0.157 emitting<br>0.571 0.433 part<br>4.5<br>0.177<br>2-ø2.2 ø0.087 6.5<br>mounting holes 0.256 4.2<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long 0.165<br>**----- End of picture text -----**<br>


**Emitter** 

**==> picture [208 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-15E  EX-17E<br>**----- End of picture text -----**<br>


**==> picture [32 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>**----- End of picture text -----**<br>


## **EX-15  EX-17** 

## Sensor 

**==> picture [503 x 225] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.138 3.5 2.1 0.083  Emitter 0.069 1.75 0.069 1.750.157 4   0.394 10  5.5 0.217  Receiver 6.45 10 0.3940.2540.217 5.5 0.069 1.75Incident beam indicator (Orange)Stability indicator (Green) 0.069 1.75  0.059 1.5  0.138 3.5  2.1 0.083  Emitter 0.069 1.75 0.069 1.75 0.157 4  0.394 10  Stability indicator (Green) Incident beam indicator (Orange)4.5 0.177 2.25 0.089  4.5 0.177 2.25 0.089  0.394 10  0.157 6.454 1.750.069 0.254 1.75 Receiver 0.069 0.059 1.5<br>0.571 14.5  0.433 11 Beam- emitting part  Beam- receiving part  4 0.157 0.433 11  4.5 0.571 14.5 0.177  0.571 14.5 0.433 11 Beam- emitting part  Beam- receivingpart  0.433 11 4.50.571 14.5 0.177<br>4.5  4.5<br>0.177  0.177  4.2  4.2<br>2-ø2.2 mounting holes ø0.087 2-ø2.2 mounting holes ø0.087 19.685 500  2-ø2.2 mounting holes ø0.087 0.165  0.165  500  2-ø2.2 mounting holes ø0.087<br>19.685<br>ø2.5 ø0.098 cables<br>15.2 0.598  ø2.5 ø0.098 cables<br>15.2 0.598<br>Operation indicator  19.2<br>(Orange)  0.756  Operation indicator  19.2<br>38  (Orange)  0.756<br>1.496  38<br>1.496<br>Operation mode switch<br>Operation mode switch<br>ø3.8 ø0.150 cable,<br>2 m 6.562 ft long  ø3.8 ø0.150 cable,<br>2 m 6.562 ft long<br>1 0.039  8<br>7  0.315  1 0.039  8<br>0.276  7  0.315<br>0.276<br>**----- End of picture text -----**<br>


**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

330 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

## **DIMENSIONS (Unit: mm in)** 

**==> picture [235 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
The CAD data in the dimensions can be downloaded from our website.<br>**----- End of picture text -----**<br>


**==> picture [471 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-14A□  EX-14B□<br>13<br>0.512<br>6.45  Stability indicator<br>0.254  2.75  (Green)  3.5<br>0.197 5  0.108 1.75 0.069  Operationindicator (Orange) 0.138  2.1 0.083<br>1.75  1.5<br>0.069  0.059<br>4.5<br>Beam- receiving  0.177  11  14.5<br>part  0.433  0.571<br>Beam-emitting part  4.5<br>0.177<br>8<br>0.315  2-ø2.2 ø0.087 mounting holes<br>ø2.5 ø0.098 cable,<br>2 m 6.562 ft long<br>**----- End of picture text -----**<br>


Sensor 

**==> picture [464 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>Assembly dimensions<br>t 0.047t 1.2 0.2997.6 Mounting drawing with  EX-14□<br>t 1.2 20 0.787 (0.7)<br>t 0.047 7.6 (0.028)<br>0.299<br>3.7<br>0.146<br>3.7 3.5 (4.9)<br>0.146 0.138 (0.193)<br>20 22.75 0.896<br>0.787 13<br>4-M2 × 0.4 0.016 6.5 8 3.5 0.512<br>thru-hole threads 0.256 0.315 0.138 2-ø3.4 ø0.134 mounting holes Beam- 0.1975  0.42310.750.3158 (8.8)3.50.138 0.0491.25<br>emitting (0.346)<br>11 8 15 part<br>0.433 0.315 0.591<br>Beam- 3 0.118 8 11 15<br>receiving 0.315 0.433 0.591<br>part<br>4.25 0.167<br>0.157 in) pan head screws are attached.) pan head screws are attached.<br>2-ø3.4 ø0.134 mounting holes<br>**----- End of picture text -----**<br>


## **MS-EX10-1** 

Material:  Cold rolled carbon steel (SPCC) (Uni-chrome plated) 

Two M2 (length 4 mm 0.157 in) pan head screws are attached.) pan head screws are attached. 

## **MS-EX10-2** 

Sensor mounting bracket (Optional) 

## **Assembly dimensions** 

**==> picture [150 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
t 1.2<br>t 0.047 7.6<br>0.299<br>6.25<br>0.246<br>20<br>0.787<br>3.2 1.4<br>0.126 0.055<br>11 8 15<br>0.433 0.315 0.591<br>2-M2 × 0.4 0.016<br>thru-hole threads 8 3.5<br>0.315 0.138<br>**----- End of picture text -----**<br>


**==> picture [219 x 182] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-11E□  and  EX-13E□<br>(2.3)<br>t 1.2 0.2997.6 (0.091)<br>t 0.047<br>6.25 4.5 (7.45)<br>0.246 0.177 (0.293)<br>(1.3)<br>(0.051) 3.2<br>4 0.25 10 0.126 1.25<br>0.157 0.010 0.394 0.049<br>1.4<br>0.055<br>Beam- 2.5 0.098<br>0.59115 0.43311 receiving 0.3158<br>part<br>4.25<br>0.167<br>8 3.5<br>0.315 0.138<br>20<br>0.787<br>**----- End of picture text -----**<br>


Material:  Cold rolled carbon steel (SPCC) (Uni-chrome plated) 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Two M2 (length 8 mm 0.315 in) pan head screws are attached. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

331 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS 

SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifier-paratedarated separatedAmplifier-paratedarated 

## **DIMENSIONS (Unit: mm in)** 

The CAD data in the dimensions can be downloaded from our website. 

## **MS-EX10-3** 

**==> picture [187 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
15<br>0.591<br>7 0.276 10.5<br>0.413<br>1.4 3.2<br>0.055 0.126<br>8<br>t 1.2 0.315 4-M2 × 0.4 0.016<br>t 0.047 thru-hole threads<br>10.8 6.5<br>0.425 0.256<br>11 2<br>0.433 0.079<br>**----- End of picture text -----**<br>


Material:  Cold rolled carbon steel (SPCC) 

(Uni-chrome plated) 

Two M2 (length 4 mm 0.157 in) pan head screws and two M2 (length 8 mm 0.315 in) pan head screws are attached. 

**==> picture [218 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>EX-14□<br>(2.75) 10.8 t 1.2<br>(0.108) 0.425 t 0.047<br>(0.7)<br>(0.028)<br>3.5 10.5<br>0.138 0.413 3.2<br>Beam-receiving part 0.51213 1.75 0.069 Beam-emitting part 0.2767 0.126<br>5 6.25 1.25<br>0.197 0.246 0.049 1.4<br>0.055<br>3 0.118<br>11 15 8<br>0.438 0.591 0.315<br>4.25<br>0.167<br>**----- End of picture text -----**<br>


**==> picture [96 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>**----- End of picture text -----**<br>


**==> picture [110 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-14□<br>**----- End of picture text -----**<br>


## **MS-EX10-11** 

**==> picture [133 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>**----- End of picture text -----**<br>


## **Assembly dimensions** 

**==> picture [110 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-14□<br>**----- End of picture text -----**<br>


**==> picture [168 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
t 1.2 8.1<br>t 0.047 0.319<br>3.7<br>0.146 20<br>0.787<br>4-M2 × 0.4 0.016 6.5 8 3.5<br>thru-hole threads 0.256 0.315 0.138 1.4 3.2<br>0.055 0.126<br>11 8 15<br>0.433 0.315 0.591<br>3.2 1.4<br>0.126 0.055<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are attached. 

**==> picture [202 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
20<br>t 1.2 0.787 8.1 (0.7)<br>t 0.047 0.319 (0.028)<br>(4.9)<br>(0.193)<br>3.7 3.5 22.75<br>0.146 0.138 13 0.896<br>0.512<br>0.1975 10.75 0.423 3.50.138<br>8 0.315<br>(9.3) 3.2 1.25<br>(0.366) 1.4 0.126 0.049<br>0.055<br>Beam-emitting part<br>3 0.118<br>8 11 15<br>0.315 0.433 0.591<br>Beam-receiving part<br>1.4 4.25<br>0.055 0.167<br>3.2<br>0.126<br>**----- End of picture text -----**<br>


**==> picture [371 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-EX10-12<br>**----- End of picture text -----**<br>


Sensor mounting bracket (Optional) 

**==> picture [96 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>**----- End of picture text -----**<br>


**==> picture [280 x 183] intentionally omitted <==**

**----- Start of picture text -----**<br>
separatedAmplifier-paratedarated t 0.047t 1.2 0.3198.1<br>CX-400 0.2466.25<br>EX-10<br>EX-20 0.78720<br>1.4<br>EX-30 0.055 3.2<br>0.126<br>EX-40<br>CX-440 11 8 15<br>0.433 0.315 0.591<br>EQ-30<br>EQ-500 2-M2 × 0.4 0.016 1.4<br>thru-hole threads 0.055<br>MQ-W 3.2<br>0.126<br>RX-LS200 8 3.5<br>0.315 0.138<br>RX Material: Stainless steel (SUS304)<br>RT-610 Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached.<br>**----- End of picture text -----**<br>


**==> picture [237 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-11E□  and  EX-13E□<br>8.1 (2.3)<br>t 1.2 0.319 (0.091)<br>t 0.047<br>6.25 4.5 (7.45)<br>0.246 0.177 (0.293)<br>(1.3)<br>(0.051)<br>4<br>0.157 0.0100.25 0.39410 1.40.055 0.049 [1.25] 3.2<br>0.126<br>Beam-  2.5 0.098<br>0.59115 0.43311 receiving 0.3158<br>part<br>1.4 4.25<br>0.055 0.167<br>3.2<br>0.126<br>8 3.5<br>0.315 0.138<br>20<br>0.787<br>**----- End of picture text -----**<br>


Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

332 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES 

PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**CX-400 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

## **DIMENSIONS (Unit: mm in)** 

**==> picture [224 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-EX10-13<br>7<br>10.5 0.276<br>0.413 3.2 0.126<br>1.4 0.055<br>1.4<br>0.055 8 3.2 0.126<br>0.315<br>15<br>t 1.2 0.591 4-M2 × 0.4 0.016<br>t 0.047 thru-hole threads<br>10.8<br>0.425 6.5 0.256<br>11 2<br>0.433 0.079<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. 

The CAD data in the dimensions can be downloaded from our website. 

**==> picture [239 x 250] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>Assembly dimensions<br>Mounting drawing with  EX-14□<br>(2.75) 10.8 t 1.2<br>(0.108) 0.425 t 0.047<br>(0.7)<br>(0.028)<br>13 1.75<br>0.512 0.069 3.5<br>5 6.25 0.138 10.5<br>0.197 0.246 1.25 0.413 7<br>0.049 0.276 1.4 3.2<br>Beam-emitting 0.055 0.126<br>part<br>3 0.118<br>11 15 8<br>Beam-receiving 0.433 0.591 0.315<br>part<br>4.25 1.4<br>0.167 0.055<br>3.2<br>0.126<br>**----- End of picture text -----**<br>


ENDOSCOPE LASER MARKERS