EX-13A-PN

Ultra-slim Photoelectric Sensor Amplifier Built-in **EX-10 SERIES Ver.2** 

279 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**■** General terms and conditions ............. F-3 **■** Selection guide ............................. P.231~ Related Information Glossary of terms / General precautions .....P.1549~ / P.1552~ **■** Korea’s S-mark ............................. P.1602[e] **Ver.2** ~~[e]~~ Recognition (Excluding some models) Certified (Some models only) 

**==> picture [192 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
panasonic.net/id/pidsx/global PNP output<br>type available<br>**----- End of picture text -----**<br>


## **Amplifier built-in extraordinarily small and slim size** 

## **Smallest body, just 3.5 mm 0.138 in thick** 

It can be mounted in a very small space as its size is just W10 × H14.5 × D3.5 mm W0.394 × H0.571 × D0.138 in (thru-beam, front sensing type). 

## **Flexible mounting** 

The diffuse reflective type sensor is front sensing and is so thin that it gives an impression of being just pasted on the mounting base. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting. 

**==> picture [228 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
Thru-beam Diffuse reflective<br>• Front sensing type • Side sensing type • Front sensing type<br>**----- End of picture text -----**<br>


## **A wide variety of narrow-beam type! Light diffusion is approx. 1/2 of standard type.** 

## **EX-** □ **S** □ 

## **Less interference with no slit, narrow-pitch can be set.** 

**Long sensing range of 1 m 3.281 ft with narrow beam** 

**Possible to sense a minute object less than ø0.5 mm ø0.039 in with ø0.039 in with  with no slit.** 

**EX-Z CX-400 narrow-pitch can be set. less than ø0.5 mm ø0.039 in with ø0.039 in with  with no slit. CY-100** The pitch of installation is 1/2 of conventional models, so that the The series is applicable to sense a **EX-10** ~~|~~ close-installation is possible. No cost minute object without any cost. **EX-20** is necessary to purchase or install **EX-30** a slit. **EX-40 CX-440 EX-11** □ / **EX-11E** □ **EQ-30** ø0.5mm **EQ-500 EX-11S** □ **EX-11S** □ / **EX-11SE** □ **MQ-W** ~~y~~ **RX-LS200** y **RX** 

A long 1 m 3.281 ft sensing range is possible with narrow beam. 

The series is applicable to sense a minute object without any cost. 

**==> picture [29 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-19S □<br>**----- End of picture text -----**<br>


**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

280 

## **APPLICATIONS** 

**==> picture [473 x 297] intentionally omitted <==**

**----- Start of picture text -----**<br>
Positioning of PCBs Detecting ICs Detecting PCB rack<br>EX-19S□<br>Transparent stick<br>IC EX-15□<br>EX-14□<br>Detecting wafer cassette Detecting thin ring Checking for absence of capacitor in tray<br>EX-14□<br>EX-13E□<br>Guide<br>EX-14□<br>**----- End of picture text -----**<br>


## **BASIC PERFORMANCE** 

## **Electric power saving *** 

## **High-speed response time: 0.5 ms** 

The sensor is suitable for detecting small and highspeed traveling objects. 

The **EX-10** series achieves reductions in power consumption A maximum **35 %** reduction of up to 65 %. These compared to conventional sensors contribute sensors to environmental friendliness. *  Effective from production in October 2010. 

**==> picture [129 x 86] intentionally omitted <==**

## **EX-19** ( **E** ) **□** 

## **Minimum sensing object: ø1 mm ø0.039 in EX-11** ( **E** ) **□** , **EX-15** ( **E** ) **□** 

## **Long sensing range: 1 m 3.281 ft** 

A sensing range of 1 m 3.281 ft has been realized with a slim size of just 3.5 **1 m** mm 0.138 in. It can be used **3.281 ft** to detect even wide IC trays. 

**EX-11□** , **EX-11E□** , **EX-15** and **EX-15E** are incorporated with ø1 mm ø0.039 in slit masks so that ø1 mm ø0.039 in, or more, object can be detected. Hence, they are suitable for precise positioning or small parts detection. 

**==> picture [105 x 82] intentionally omitted <==**

## **EX-14□** 

## **Background suppression** 

## **Hardly affected by background** 

## **Black object reliably detected** 

**==> picture [224 x 74] intentionally omitted <==**

**----- Start of picture text -----**<br>
It can reliably detect dark  The best distance is approx. 10 mm<br>color objects since it is  0.394 in from the<br>convergent reflective type. object.<br>**----- End of picture text -----**<br>


Even a specular background separated by 100 mm 3.937 Background in, or more, is not detected. 100 mm (However, the background 3.937 in should be directly opposite. A spherical or curved background may be detected.) 

FIBER SENSORS 

LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10 EX-20 EX-30 EX-40** 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

281 

~~CC~~ FIBER ~~rrr~~ **ENVIRONMENTAL RESISTANCE** SENSORS LASER **Incorporated an inverter countermeasure circuit * Waterproof IP67** SENSORS PHOTOELECTRIC The **EX-10** series become Fluorescent light The sensors features an IP67 rating to allow their use SENSORS significantly stronger in process lines where water is used or splashed. MICRO against inverter light and Rust-resistant stainless steel sensor mounting brackets PHOTOELECTRICSENSORS other extraneous light. are available. *  Effective from production in SENSORSAREA October 2010. Note: If water splashes on the sensor during sensing operation, it may sense water as an object. SAFETY LIGHT CURTAINS / SAFETY COMPONENTS **Bending durability EX-□-R** PRESSURE / FLOW SENSORS Bending-resistant cable type **EX-□-R** is available. It is PROXIMITYINDUCTIVE most suitable for moving parts, such as robot arm, etc. SENSORS USE SENSORSPARTICULAR ~~eee~~ **MOUNTING / SIZE** SENSOR **Mountable with M3 screws** OPTIONS SIMPLE Non-corrosive stainless steel type sensor mounting bracket is also available. WIRE-SAVING UNITS **• MS-EX10-1 • MS-EX10-2 • MS-EX10-3** WIRE-SAVING [Cold rolled carbon steel (SPCC)] [Cold rolled carbon steel (SPCC)] [Cold rolled carbon steel (SPCC)] SYSTEMS **MS-EX10-11 MS-EX10-12 MS-EX10-13** MEASUREMENT [Stainless steel (SUS304)] [Stainless steel (SUS304)] [Stainless steel (SUS304)] SENSORS mounting bracket for the front mounting bracket for the side (L-shaped mounting bracket) STATIC sensing type sensing type CONTROL DEVICES M3 screws LASER ~~——~~ MARKERS | ~ | ) _ PLC M3 screws HUMAN MACHINE ~~—~~ INTERFACES eI ~~&~~ a M3 screws ~~ee~~ ENERGY RX MANAGEMENT Note: Sensor mounting brackets can not be used for SOLUTIONS the narrow beam type ( **EX-□S□** ). FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier ~~a~~ Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400** ~~—~~ **CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** ~~——_—~~ **RT-610** 

## **Red beam makes beam alignment easy** 

The red LED beam projected from the emitter helps you to align the sensor heads. 

## eee, **FUNCTIONS** ~~ee~~ **VARIETIES** 

## **Bright 2-color indicator** 

A convenient 2-color indicator has been incorporated in the miniature body. 

## **Operation mode switch** 

**EX-15□/17□** 

Thru-beam type sensor incorporated with an operation mode switch on the bifurcation is also available. It helps 

you to test the operability before start-up. 

2-color indicator Orange: Operation indicator Green: Stability indicator | 

> Operation mode switch a Even for the thru-beam Operation indicator type sensor, only three (Orange) wires have to be connected. 

## **OTHERS** 

## **Less resources used *** 

Based on environmental considerations, simplified packaging is used in order to reduce waste. In addition, the bag is made from polyethylene which produces no toxic gases even when burned. 

*  Effective from production in October 2010. 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

282 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**==> picture [546 x 530] intentionally omitted <==**

**----- Start of picture text -----**<br>
ORDER GUIDE FIBER<br>SENSORS<br>LASER<br>Model No.(Note 2) Output SENSORS<br>Type Appearance Sensing range NPN output PNP output operation Output PHOTO-ELECTRIC<br>SENSORS<br>EX-11A EX-11A-PN Light-ON MICRO<br>150 mm 5.906 in  PHOTO-<br>EX-11B EX-11B-PN Dark-ON ELECTRICSENSORS<br>500 mm  EX-13A EX-13A-PN Light-ON AREASENSORS<br>19.685 in<br>EX-13B EX-13B-PN Dark-ON SAFETY LIGHT<br>CURTAINS /<br>1 m  EX-19A EX-19A-PN Light-ON SAFETY COMPONENTS<br>3.281 ft EX-19B EX-19B-PN Dark-ON PRESSURE / FLOW<br>SENSORS<br>150 mm 5.906 in  EX-15  EX-15 -PN Switchable  INDUCTIVEPROXIMITY<br>either  SENSORS<br>500 mm 19.685 in  EX-17 EX-17-PN Light-ON or Dark-ON PARTICULARUSE SENSORS<br>NPN open- SENSOR<br>EX-11EA EX-11EA-PN Light-ON collector  OPTIONS<br>150 mm 5.906 in<br>transistor<br>EX-11EB EX-11EB-PN Dark-ON SIMPLE<br>or WIRE-SAVING<br>500 mm  EX-13EA EX-13EA-PN Light-ON PNP open- UNITS<br>19.685 in  collector WIRE-SAVING<br>EX-13EB EX-13EB-PN Dark-ON transistor SYSTEMS<br>1 m  EX-19EA EX-19EA-PN Light-ON MEASURE-MENT<br>3.281 ft EX-19EB EX-19EB-PN Dark-ON SENSORS<br>STATIC<br>CONTROL<br>150 mm 5.906 in  EX-15E - Switchable  DEVICES<br>either  LASER<br>500 mm  Light-ON or  MARKERS<br>19.685 in  EX-17E - Dark-ON<br>PLC<br>EX-14A EX-14A-PN Light-ON HUMAN MACHINE<br>2 to 25 mm 0.079 to 0.984 in (Note 1) INTERFACES<br>(Convergent point: 10 mm 0.394 in)  EX-14B EX-14B-PN Dark-ON ENERGY MANAGEMENT SOLUTIONS<br>EX-11SA EX-11SA-PN Light-ON FA COMPONENTS<br>150 mm 5.906 in<br>EX-11SB EX-11SB-PN Dark-ON MACHINE<br>VISION<br>500 mm  EX-13SA EX-13SA-PN Light-ON SYSTEMS<br>19.685 in  EX-13SB EX-13SB-PN Dark-ON NPN open- UV CURING<br>collector  SYSTEMS<br>1 m  EX-19SA EX-19SA-PN Light-ON transistor<br>3.281 ft or<br>EX-19SB EX-19SB-PN Dark-ON PNP open-<br>collector<br>EX-11SEA EX-11SEA-PN Light-ON transistor<br>150 mm 5.906 in  Selection<br>EX-11SEB EX-11SEB-PN Dark-ON Guide<br>Amplifier<br>500 mm  EX-13SEA EX-13SEA-PN Light-ON Built-in<br>Power Supply<br>19.685 in  Built-in<br>EX-13SEB EX-13SEB-PN Dark-ON<br>Amplifier-<br>Front sensing<br>With operation mode switch on the bifurcation<br>Thru-beam<br>Standard type<br>Side sensing<br>With operation mode switch on the bifurcation<br>Convergent reflective (Diffused beam type) Front sensing<br>Front sensing<br>Thru-beam<br>Narrow beam type<br>Side sensing<br>**----- End of picture text -----**<br>


NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets ( **MS-EX10-□** ). Sensor mounting brackets ( **MS-EX10-□** ) can not be used for the narrow beam type ( **EX-□S□** ). 

Notes: 1) The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should be directly opposite. A spherical or curved background may be detected.) 

- 2) The model No. with  “ **P** ” shown on the label affixed to the thru-beam type sensor is the emitter, “ **D** ” shown on the label is the receiver. 

## **Bending-resistant cable type** 

Bending-resistant cable type is also available for NPN output type. (excluding narrow beam type **EX-□S□** and sensor with operation mode switch on the bifurcation **EX-15□/17□** ) 

- When ordering this type, suffix “ **-R** ” to the model No. 

- (e.g.) Bending-resistant cable type of **EX-11A** is “ **EX-11A-R** ”. 

## **5 m 16.404 ft cable length type** 

- 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) is also available for NPN output type. (excluding narrow beam type **EX-□S□** and bending-resistant cable type) When ordering this type, suffix “ **-C5** ” to the model No. 

- (e.g.) 5 m 16.404 ft cable length type of **EX-11A** is “ **EX-11A-C5** ”. 

**EX-Z CX-400 CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

283 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS 

INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10** 

**EX-20 EX-30 EX-40** 

**CX-440 EQ-30** 

**EQ-500 MQ-W RX-LS200 RX** 

## **OPTIONS** 

## NOTE: Sensor mounting brackets can not be used for the narrow beam type ( **EX-□S□** ). 

## **Sensor mounting bracket** 

**==> picture [495 x 421] intentionally omitted <==**

**----- Start of picture text -----**<br>
• MS-EX10-1 • MS-EX10-11<br>Designation Model No. Description<br>Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]<br>MS-EX10-1<br>(The thru-beam type sensor needs two brackets.)<br>Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]<br>MS-EX10-2<br>(The thru-beam type sensor needs two brackets.)<br>L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]<br>Sensor mounting  MS-EX10-3 (The thru-beam type sensor needs two brackets.) Material: Cold rolled  Material: Stainless<br>bracket carbon steel (SPCC)  steel (SUS304)<br>(Note 1) MS-EX10-11 Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)] (Uni-chrome plated) Two M2 (length 4 mm<br>(The thru-beam type sensor needs two brackets.) Two M2 (length 4 mm  0.157 in) pan head<br>0.157 in) pan head  screws [stainless<br>Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)] screws are attached. steel (SUS304)] are<br>MS-EX10-12 (The thru-beam type sensor needs two brackets.) attached.<br>L-shaped mounting bracket [Stainless steel (SUS304)]<br>MS-EX10-13<br>(The thru-beam type sensor needs two brackets.) • MS-EX10-2 • MS-EX10-12<br>• Sensing range: 600 mm 23.622 in [ EX-19□ ]<br>Slit on one side 250 mm 9.843 in [ EX-13□ ,  EX-17□ ]<br>• Min. sensing object: ø2 mm ø0.079 in<br>OS-EX10-12<br>(Slit size ø1.2 mm ø0.047 in) • Sensing range: 400 mm 15.748 in [ EX-19□ ]<br>Slit on both sides 200 mm 7.874 in [ EX-13□ ,  EX-17□ ]<br>• Min. sensing object: ø1.2 mm ø0.047 in<br>• Sensing range: 800 mm 31.496 in [ EX-19□ ]<br>Slit on one side 350 mm 13.780 in [ EX-13□ ]<br>Slit mask OS-EX10-15 • Min. sensing object: ø2 mm ø0.079 in Material: Cold rolled carbon steel (SPCC)  Material: Stainless steel (SUS304)<br>(Slit size ø1.5 mm ø0.059 in) • Sensing range: 500 mm 19.685 in [ EX-19□ ] (Uni-chrome plated) Two M2 (length 8 mm<br>Slit on both sides 300 mm 11.811 in [ EX-13□ ] Two M2 (length 8 mm  0.315 in) pan head<br>• Min. sensing object: ø1.5 mm ø0.059 in 0.315 inscrews are attached.) pan head  screws [stainless steel (SUS304)] are<br>attached.<br>• Sensing range:  400 mm 15.748 in [ EX-19E□ ] (Note 3)<br>Slit on one side 250 mm 9.843 in [ EX-13E□ ,  EX-17E□ ]<br>OS-EX10E-12 • Min. sensing object: ø2 mm ø0.079 in<br>(Slit size ø1.2 mm ø0.047 in) • MS-EX10-3 • MS-EX10-13<br>Slit on both sides • Sensing range: 200 mm 7.874 in [ EX-13E□ ,  EX-17E□ ]<br>• Min. sensing object: ø1.2 mm ø0.047 in<br>Sensor checker  It is useful for beam alignment of thru-beam type sensors. The optimum<br>CHX-SC2<br>(Note 2) receiver position is given by indicators, as well as an audio signal.<br>Mounting screws with washers (50 pcs. lot). It can mount<br>Mounting screw MS-M2<br>securely as it is spring washer attached.<br>Notes: 1)  Can not be used for the narrow beam type ( EX-□S□ ).<br>2) Refer to p.959~ for the sensor checker  CHX-SC2 .<br>**----- End of picture text -----**<br>


- 3) Since **EX-19E□** has a built-in ø1 mm ø 0.039 in slit in the emitter, be sure to mount it in the receiver. 

## **Sensor checker** 

## **Slit mask** 

Example of mounting 

**• CHX-SC2** 

**• OS-EX10-12 • OS-EX10E-12** 

( **OS-EX10E-12** ) 

## **• OS-EX10-15** 

**==> picture [206 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor checker<br>Tighten along with the sensor<br>mounting bracket.<br>POWER  CHX-SC2<br>LEVEL<br>**----- End of picture text -----**<br>


Material: Cold rolled Material: Stainless steel carbon steel (SPCC) (SUS304) (Uni-chrome plated) Two M2 (length 4 mm Two M2 (length 4 mm 0.157 in) pan head 0.157 in) pan head screws [stainless screws, and two M2 steel (SUS304)] and (length 8 mm 0.315 in) two M2 (length 8 mm pan head screws are 0.315 in) pan head attached. screws [stainless steel (SUS304)] are attached. 

**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

284 

FIBER SENSORS LASER SENSORS PHOTO-ELECTRIC ELECTRIC SENSORS MICRO PHOTOELECTRICSENSORS SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS COMPONENTS PRESSURE / FLOWSENSORS FLOWSENSORS SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVINGUNITS UNITS WIRE-SAVING SYSTEMS MEASURE-MENT MENT SENSORS STATIC CONTROL DEVICES LASER MARKERS 

## **SPECIFICATIONS** 

**==> picture [546 x 703] intentionally omitted <==**

**----- Start of picture text -----**<br>
SENSORS<br>Type Thru-beam  [•]  standard type PHOTO-ELECTRIC<br>SENSORS<br>Front sensing Side sensing Front sensing Side sensing Front sensing Side sensing MICRO<br>PHOTO-<br>Model No. Light-ON EX-11A ( -PN ) EX-11EA ( -PN ) EX-13A ( -PN ) EX-13EA ( -PN ) EX-19A ( -PN ) EX-19EA ( -PN ) ELECTRICSENSORS<br>Item (Note 2) Dark-ON EX-11B ( -PN ) EX-11EB ( -PN ) EX-13B ( -PN ) EX-13EB ( -PN ) EX-19B ( -PN ) EX-19EB ( -PN ) AREA<br>SENSORS<br>CE marking directive compliance EMC Directive, RoHS Directive SAFETY LIGHT<br>CURTAINS /<br>Sensing range 150 mm 5.906 in 500 mm 19.685 in 1 m 3.281 ft SAFETY COMPONENTS<br>(Completely beam interrupted object)ø1 mm ø0.039 in opaque object (Completely beam interrupted object)ø2 mm ø0.079 in opaque object ø2 mm opaque objectø0.079 in PRESSURE / FLOWSENSORS<br>Setting distance  Setting distance  Completely beam  INDUCTIVE<br>Min. sensing object between emitter  between emitter  interrupted object PROXIMITY<br>SENSORS<br>and receiver:   and receiver:   Setting distance between<br>150 mm 5.906 in 500 mm 19.685 in emitter and receiver:  PARTICULAR<br>1 m 3.281 ft USE SENSORS<br>Hysteresis – SENSOR<br>OPTIONS<br>Repeatability (perpendicular to sensing axis) 0.05 mm 0.002 in or less<br>SIMPLE<br>Supply voltage 12 to 24 V DC ±10 %  Ripple P-P 10 % or less WIRE-SAVINGUNITS<br>Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less WIRE-SAVING<br>SYSTEMS<br><NPN output type> <PNP output type><br>NPN open-collector transistor PNP open-collector transistor MEASURE-MENT<br>• Maximum sink current: 50 mA • Maximum source current: 50 mA SENSORS<br>Output<br>• Applied voltage: 30 V DC or less (between output and 0 V) • Applied voltage: 30 V DC or less (between output and +V) STATIC<br>• Residual voltage: 2 V or less (at 50 mA sink current) • Residual voltage:  2 V or less (at 50 mA source current) CONTROL<br>1 V or less (at 16 mA sink current) 1 V or less (at 16 mA source current) DEVICES<br>LASER<br>Utilization category DC-12 or DC-13 MARKERS<br>Short-circuit protection Incorporated<br>PLC<br>Response time 0.5 ms or less<br>HUMAN<br>Operation indicator Orange LED (lights up when the output is ON) MACHINE INTERFACES<br>Incident beam indicator – ENERGY<br>MANAGEMENT<br>SOLUTIONS<br>Green LED<br>Stability indicator<br>(lights up under stable light received condition or stable dark condition) FA<br>COMPONENTS<br>Pollution degree 3 (Industrial environment)<br>MACHINE<br>Protection IP67 (IEC) VISION SYSTEMS<br>Ambient temperature −25 to +55 °C −13 to +131 °F (No dew condensation or icing allowed), Storage: −30 to +70 °C −22 to +158 °F UV CURING<br>SYSTEMS<br>Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH<br>Ambient illuminance Incandescent light: 3,000 ℓx or less at the light-receiving face<br>Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure<br>Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Selection Guide<br>Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each Amplifier Built-in<br>Shock resistance 500 m/s [2]  acceleration (50 G approx.) in X, Y and Z directions three times each Power Supply  Built-in<br>Emitting element Red LED [Peak emission wavelength: 680 nm 0.027 mil ( EX-19E□ : 624 nm 0.025 mil), modulated] Amplifier-separated<br>Material Enclosure: Polyethylene terephthalate, Lens: Polyalylate<br>Cable (Note 3) 0.1 mm [2]  3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long EX-Z<br>CX-400<br>Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm [2] , or more, cable (thru-beam type: emitter and receiver).<br>CY-100<br>Weight Net weight (each emitter and receiver): 20 g approx., Gross weight: 50 g approx.<br>EX-10<br>Accessories  Mounting screws: 1 set<br>EX-20<br>Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.<br>2) Model Nos. having the suffix “ -PN ” are PNP output type. EX-30<br>3)  The bending-resistant cable type (model Nos. having suffix “ -R ”) has a 0.1 mm [2]  3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable,  EX-40<br>2 m 6.562 ft long.<br>CX-440<br>EQ-30<br>EQ-500<br>MQ-W<br>RX-LS200<br>RX<br>RT-610<br>Environmental resistance<br>**----- End of picture text -----**<br>


Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

285 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10** 

**EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX** 

## **SPECIFICATIONS** 

**==> picture [503 x 649] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type Thru-beam  [•]  narrow beam type Convergent reflective(Diffused beam type) [Thru-beam · with operation mode switch on bifurcation]<br>Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensing<br>Model No. Light-ON EX-11SA ( -PN ) EX-11SEA ( -PN ) EX-13SA ( -PN ) EX-13SEA ( -PN ) EX-19SA ( -PN ) EX-14A ( -PN ) EX-15  EX-15E  EX-17 EX-17E<br>Item (Note 2) Dark-ON EX-11SB ( -PN ) EX-11SEB ( -PN ) EX-13SB ( -PN ) EX-13SEB ( -PN ) EX-19SB ( -PN ) EX-14B ( -PN ) (Note 3) (Note 3) (Note 3) (Note 3)<br>CE marking directive compliance EMC Directive, RoHS Directive –<br>2 to 25 mm 0.079<br>Sensing range 150 mm 5.906 in 500 mm 19.685 in 1 m 3.281 ft to 0.984 in (Note 4) 150 mm 5.906 in 500 mm 19.685 in<br>(Conv. point: 10 mm 0.394 in)<br>ø0.5 mm  ø1 mm ø0.039 in opaque object ø2 mm ø0.079 in opaque object<br>ø0.002 in ø1 mm ø0.039 in opaque object ø2 mm ø0.079 in opaque object ø0.1 mm ø0.004  (Completely beam interrupted object) (Completely beam interrupted object)<br>opaque object (Completely beam interrupted object) (Completely beam interrupted object) in copper wire Setting distance  Setting distance<br>Min. sensing object beam interrupted (Completely  (Note 5) (Note 5) Setting distance:  between emitter and receiver:  between emitter and receiver:<br>object) 10 mm 0.394 in 150 mm 5.906 in 500 mm 19.685 in<br>(Note 5)<br>– 15 % or less of operation  –<br>Hysteresis<br>distance (Note 4)<br>Repeatability (perpendicular to sensing axis) 0.05 mm 0.002 in or less 0.1 mm 0.004 in or less 0.05 mm 0.002 in or less<br>Supply voltage 12 to 24 V DC ±10 %  Ripple P-P 10 % or less<br>Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less 13 mA or less 25 mA or less<br><NPN output type> <PNP output type> NPN open-collector transistor<br>NPN open-collector transistor PNP open-collector transistor • Maximum sink current: 100 mA<br>•  Maximum sink current: 50 mA •  Maximum source current: 50 mA •  Applied voltage: 30 V DC or less (between output and 0 V)<br>Output •  Applied voltage: 30 V DC or less (between output and 0 V) •  Applied voltage: 30 V DC or less (between output and +V) •  Residual voltage: 2 V or less<br>•  Residual voltage: 2 V or less (at 50 mA sink current) •  Residual voltage: 2 V or less (at 50 mA source current) (at 100 mA sink current)<br>1 V or less (at 16 mA sink current) 1 V or less (at 16 mA source current) 1 V or less (at 16 mA sink current)<br>Utilization category DC-12 or DC-13 –<br>Short-circuit protection Incorporated<br>Response time 0.5 ms or less<br>Operation indicator Orange LED (lights up when the output is ON) Orange LED (lights up when the output is ON), located on the bifurcation<br>Incident beam indicator – Orange LED (lights up under light received<br>condition), located on the receiver<br>Green LED Green LED (lights up under stable light received<br>Stability indicator condition or stable dark condition), located on the<br>(lights up under stable light received condition or stable dark condition) receiver<br>Pollution degree 3 (Industrial environment) –<br>Protection IP67 (IEC)<br>Ambient temperature −25 to +55 °C −13 to +131 °F (No dew condensation or icing allowed), Storage: −30 to +70 °C −22 to +158 °F<br>Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH<br>Ambient illuminance Incandescent light: 3,000 ℓx or less at the light-receiving face<br>Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure<br>Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure<br>Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each<br>Shock resistance 500 m/s [2]  acceleration (50 G approx.) in X, Y and Z directions three times each<br>Emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)<br>Material Enclosure: Polyethylene terephthalate Enclosure: Polyethylene terephthalate<br>Lens: Polyalylate Lens: Polyalylate, Bifurcation: Polyalylate<br>0.1 mm [2]  3-core (thru-beam type emitter: 2-core) cabtyre cable,   0.2 mm [2]  3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation;<br>Cable (Note 6) 2 m 6.562 ft long from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)<br>Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm [2] , or more, cable (thru-beam type: emitter and receiver). Extension up to total 100 m 328 ft is possible with 0.3 mm [2] , or more, cable.<br>Net weight (each emitter and receiver): 20 g approx., Net weight: 20 g approx.<br>Weight Gross weight: 50 g approx. Gross weight: 40 g approx. [Net weight: 55 g approx., Gross weight: 80 g approx.]<br>Accessories Mounting screws: 1 set Mounting screws: 1 set Mounting screws: 1 set, Adjusting screwdriver: 1 pc.<br>Environmental resistance<br>**----- End of picture text -----**<br>


Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 

- 2) Model Nos. having the suffix “ **-PN** ” are PNP output type. 

- 3) Either Light-ON or Dark-ON can be selected by the operation mode switch. 

- 4) The sensing range and the hysteresis of convergent reflective type sensor are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object. 

- 5) The min. sensing objects are specified in case the emitter / reciever sensing range is to set the maximum. 

- 6) The bending-resistant cable type (model Nos. having suffix “ **-R** ”) has a 0.1 mm[2] 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long. 

**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

286 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

## **I/O CIRCUIT AND WIRING DIAGRAMS** 

## **EX-11□  EX-11S□  EX-13□  EX-13S□  EX-19□  EX-19S□  EX-14□** 

NPN output type 

**I/O circuit diagram** 

## **Wiring diagram** 

**==> picture [233 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>D1 (Brown) +V<br>(Black)  Load<br>D2 Output (Note)  +  12 to 24 V DC<br>Tr  ZD 50 mA  max.  −  ±10 %<br>(Blue) 0 V<br>Internal circuit  Users’ circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


**==> picture [123 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
Brown<br>Load<br>Black (Note)  +  12 to 24 V DC<br>−  ±10 %<br>Blue<br>**----- End of picture text -----**<br>


Note: The emitter of the thru-beam type sensor does not incorporate the black wire. 

Note: The emitter of the thru-beam type sensor does not incorporate the output. 

Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor 

## **EX-11□-PN  EX-11S□-PN  EX-13□-PN  EX-13S□-PN  EX-19□-PN  EX-19S□-PN  EX-14□-PN** 

PNP output type 

**I/O circuit diagram** 

## **Wiring diagram** 

**==> picture [224 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>(Brown) +V<br>ZD<br>50 mA  max.  +  12 to 24 V DC<br>Tr  D2 (Black) Output (Note)  −  ±10 %<br>Load<br>D1 (Blue) 0 V<br>Internal circuit  Users’ circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


**==> picture [124 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
Brown<br>Black (Note)  +  12 to 24 V DC<br>−  ±10 %<br>Load<br>Blue<br>**----- End of picture text -----**<br>


Note: The emitter of the thru-beam type sensor does not incorporate the black wire. 

Note: The emitter of the thru-beam type sensor does not incorporate the output. 

Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor 

## **EX-15□  EX-15E□  EX-17□  EX-17E□** 

## **I/O circuit diagram** 

**==> picture [230 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color code<br>D1 (Brown) +V<br>Load<br>D2 (Black) Output  +  12 to 24 V DC<br>Tr  ZD 100 mA  max.  − ±10 %<br>(Blue) 0 V<br>Internal circuit  Users’ circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor 

NPN output type 

## **EX-15□, EX-15E□, EX-17□, EX-17E□ wiring diagram** 

**==> picture [222 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
Brown<br>Load<br>Black  +   12 to 24 V DC<br>−  ±10 %<br>Blue<br>**----- End of picture text -----**<br>


**EX-Z CX-400 CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200** 

**RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

287 

**==> picture [548 x 746] intentionally omitted <==**

**----- Start of picture text -----**<br>
SENSORSFIBER SENSING CHARACTERISTICS (TYPICAL)<br>LASER<br>SENSORS EX-11□  EX-11E□  EX-15□  EX-15E□ Thru-beam type *Optical properties of side sensing types ( EX-□E□ )<br>Due to the optical properties of side sensing types, note that sensing may<br>ELECTRICSENSORSPHOTO- Parallel deviation Angular deviation be affected if multiple sensors are positioned in such a way that optical axes intersect as shown in the diagram below.<br>MICRO 200 200<br>PHOTO- 7.874 EX-11 □ 7.874<br>ELECTRIC EX-15 □<br>SENSORS<br>EX-11E □ Emitter 2 Receiver 1 Beam from Emitter 1<br>SENSORSAREA 5.906150 EX-15E □ 5.906150 EX-11 □ may be caught by Receiver 2.<br>EX-15 □<br>COMPONENTSPRESSURE / SAFETY LIGHT SENSORSCURTAINS /SAFETY FLOW 3.9371.96910050 EX-11 EX-15 Emitterℓ □ □L ℓ EX-11E EX-15E EmitterL □ □ 3.9371.96910050 Emitter EX-15EEX θ L -11E Emitter□□θ L Emitter 1Emitter 1 Receiver 1Receiver 2 There is no problem when<br>INDUCTIVE EX-11 □ EX-11E □ ℓ × 2 or more sensors are installed in<br>PROXIMITYSENSORS 0 Receiver Receiver 0 EX-15 □ Receiver Receiver EX-15E □ parallel<br>50 25 0 25 50 20 10 0 10 20 Emitter 2 Receiver 2 (although the distance<br>PARTICULARSENSORSUSE  1.969 LeftOperating point ℓ (mm 0.984 Center 0.984Rightin) 1.969 LeftOperating angle θ ( ° )Center Right L between sensors should be ℓ × 2 or more).<br>SENSOR<br>OPTIONS<br>SIMPLE EX-13□  EX-13E□  EX-17□  EX-17E□ Thru-beam type<br>WIRE-SAVING<br>UNITS Parallel deviation Angular deviation Parallel deviation with slit  Parallel deviation with slit<br>WIRE-SAVING SYSTEMS masks (ø1.2 mm ø0.047 in) masks (ø1.5 mm ø0.059 in)<br>800 800  400 400<br>MEASURE- 31.496 31.496  15.748 EX-13 □ /17 □ 15.748 Slit on one side<br>MENT Slit on one side or both sides<br>SENSORS EX-13 □ /17 □<br>CONTROL DEVICESSTATIC  23.622600 EX-13EEX-13EX-17 □□□ 23.622 600  EX-13EX-17 □□ 11.811300 Slit on both sides EX-13E Slit on one side□ /17E □ 11.811300<br>MARKERSLASER 15.748400 Emitter EX-17E □ Emitter 15.748 400  Emitter  EX-13E EX-17E □ □ 7.874200 EX-13E Slit on both sides□ /17E □ Emitter 7.874200 Slit on one side, sensing range: 350 mm 13.78 in Emitter<br>PLC  7.874200 ℓ L ℓ L 7.874 200  θ L  θ Emitter L  3.937100 ℓ L 3.937100 Slit on both sides, sensing range: 300 mm 11.81 in ℓ L<br>INTERFACESMACHINE HUMAN  0100Receiver EX-13EX-17 50 □□ 0 EX-13EEX-17E 50□□ Receiver100 020  EX-13EX-17 10 □□ Receiver 0  Receiver 10  EX-13EEX-17E □□ 20  040 20 0 Receiver20 40 0100 50 0 Receiver50 100<br>MANAGEMENT SOLUTIONS ENERGY  3.937 LeftOperating point ℓ (mm 1.969 Center 1.969Rightin) 3.937 Left Operating angle θ ( ° ) Center  Right  1.575 LeftOperating point ℓ (mm 0.787 Center 0.787Rightin) 1.575 3.937 LeftOperating point ℓ (mm 1.969 Center 1.969Rightin) 3.937<br>FA<br>COMPONENTS<br>EX-19□ Thru-beam type<br>MACHINE<br>VISION<br>SYSTEMS Parallel deviation Angular deviation Parallel deviation with slit  Parallel deviation with slit<br>CURING UV  masks (ø1.2 mm ø0.047 in) masks (ø1.5 mm ø0.059 in)<br>SYSTEMS<br>800<br>31.496<br>Slit on one side Slit on one side<br>1,000 1,000 1,000<br>39.370 39.370 600 39.370<br>23.622<br>Selection Guide 400 Slit on both sides<br>Amplifier Built-in 500 Emitter 500 Emitter 15.748 Emitter 500 Emitter<br>19.685 19.685 19.685<br>Power Supply Amplifier-Built-in ℓ L θ L 7.874200 Slit on both sides ℓ L ℓ L<br>separated Receiver Receiver Receiver Receiver<br>0 0 0 0<br>200 100 0 100 200 40 20 0 20 40 200 100 0 100 200 200 100 0 100 200<br>EX-Z  7.874 3.937 3.937 7.874 Left Center Right 7.874 3.937 3.937 7.874 7.874 3.937 3.937 7.874<br>Left Center Right Operating angle θ ( ° ) Left Center Right Left Center Right<br>CX-400 Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)<br>CY-100<br>EX-19E□ Thru-beam type EX-11S□ / EX-11SE□ Thru-beam type EX-13S□ / EX-13SE□ Thru-beam type EX-19S□ Thru-beam type<br>EX-10<br>EX-20 Parallel deviation Parallel deviation Parallel deviation Parallel deviation<br>200 800<br>EX-30 7.874 31.496<br>EX-13S □<br>EX-40 1,000 1,000<br>39.370 150 600 39.370<br>CX-440 5.906 EX-11S □ EX-11SE □ 23.622 EX-13SE □<br>EQ-30<br>100 400<br>EQ-500 19.685500 Emitter 3.937 EX-11S Emitter□ EX-11SE Emitter□ 15.784 Emitter Emitter 19.685500 Emitter<br>MQ-W ℓ L 1.96950 ℓ L ℓ L 7.874200 ℓ L ℓ L ℓ L<br>RX-LS200 Receiver Receiver<br>RX 0200 100 0 100 Receiver200 050Receiver25 0 25Receiver50 050 EX-13S 25□ 0 EX-13SE 25 □50 0100 50 0 50 Receiver100<br>RT-610 7.874 Left3.937Operating point ℓ (mmCenter 3.937Right in) 7.874 1.969 Left0.984Operating point ℓ (mmCenter 0.984Right in) 1.969 1.969 Left0.984Operating point ℓ (mmCenter 0.984Right in) 1.969 3.937 Left1.969Operating point ℓ (mmCenter 1.969Right in) 3.937<br>)in )in<br>Setting distance L (mm  Setting distance L (mm<br>)in )in )in )in<br>Setting distance L (mm  Setting distance L (mm  Setting distance L (mm  Setting distance L (mm<br>)in )in )in )in<br>Setting distance L (mm  Setting distance L (mm  Setting distance L (mm  Setting distance L (mm<br>)in )in )in )in<br>Setting distance L (mm Setting distance L (mm Setting distance L (mm Setting distance L (mm<br>**----- End of picture text -----**<br>


Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

288 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10** 

**EX-20 EX-30** 

**EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200** 

## **SENSING CHARACTERISTICS (TYPICAL)** 

## **EX-14□** 

Convergent reflective type 

## **Sensing fields** 

**==> picture [255 x 294] intentionally omitted <==**

**----- Start of picture text -----**<br>
•  Horizontal (left and right) direction •  Vertical (up and down) direction<br>40 40<br>1.575 50 × 50 mm 1.969 × 1.969 in 1.575<br>Non-glossy paper<br>30 30<br>1.181 7 mm ℓ 1.181 50 × 50 mm<br>0.276 in L White 1.969 × 1.969 inNon-glossy paper<br>20 20<br>0.787 White 0.787<br>10 10<br>0.394 0.394 ℓ<br>N4 N4 7.75mm L<br>0.305 in<br>0 0<br>10 5 0 5 10 10 5 0 5 10<br>0.394 0.197 0.197 0.394 0.394 0.197 0.197 0.394<br>Left Center Right Down Center Up<br>Operating point ℓ (mm in) Operating point ℓ (mm in)<br>Correlation between lightness and sensing range<br>1.57540 The sensing region (typical) is<br>represented by oblique lines<br>30 in the left figure. However, the<br>1.181 sensitivity should be set with<br>enough margin because of<br>20 slight variation in products.<br>0.787<br>Sensing region<br>10<br>0.394<br>  0<br>DarkN2 N4LightnessN6 N8Light Lightness shown on the left<br>may differ slightly from the<br>N1 N2 N3 N4 N5 N6 N7 N8 N9 actual object condition.<br>)in )in<br>Setting distance L (mm  Setting distance L (mm<br>)in<br>Sensing range L (mm<br>Distance to  convergent point<br>**----- End of picture text -----**<br>


## **PRECAUTIONS FOR PROPER USE** 

- Never use this product as a sensing device for personnel protection. 

- In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. 

## **Mounting** 

- **In case of mounting on tapped holes** (Unit: mm in) 

**==> picture [230 x 71] intentionally omitted <==**

**----- Start of picture text -----**<br>
Side sensing Front sensing<br>Sensing<br>Sensing 11 direction<br>direction 0.433<br>Attached screw 11<br>Attached screw M2 × 0.4 0.016 hole [M2 (length 8 0.315)] 0.433<br>[M2 (length 10 0.394)] tapped, 6 0.157 deep M2 × 0.4 tapped, 7 0.0160.276 hole deep<br>**----- End of picture text -----**<br>


The tightening torque should be 0.2 N·m or less. 

- **In case of using attached screws and nuts** (Unit: mm in) 

**==> picture [229 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
Side sensing Front sensing<br>Flat washers<br>Sensing<br>11 Sensing direction<br>0.433 direction Nuts<br>Attached screw Spring washers [M2 (length 8 Attached screw0.315)] 0.43311<br>[M2 (length 10 0.394)]<br>Thickness of Thickness of<br>mounting plate: 2 0.079 or less mounting plate: 2.5 0.098 or less<br>**----- End of picture text -----**<br>


## **Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range** 

**==> picture [243 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
80<br>3.150 The bars in the graph indicate<br>the sensing range (typical)<br>60 for the respective material.<br>2.362 However, there is a slight<br>variation in the sensing range<br>40 depending on the product.<br>1.575 Further, if there is a reflective<br>object (conveyor, etc.) in the<br>0.78720 background of the sensing<br>10 object, since it affects the<br>0.3940 sensing, separate it by more<br>than twice the sensing range<br>shown in the left graph.<br>)in<br>Sensing range L (mm<br>Black circuit board Black rubber sheet IC tray (Black) Glass epoxy printed circuit board (Green masked surface) Ceramic circuit board White non-glossy paper Stainless steel plate Aluminum plate(Hair line) Aluminum-evaporated mirror Distance to convergent point<br>**----- End of picture text -----**<br>


Refer to p.1552~ for general precautions. 

**Operation mode switch (EX-15□, EX-15E□, EX-17□ and EX-17E□ only)** 

Operation mode switch L: Light-ON D: Dark-ON Operation indicator (Orange) Lights up when the output is ON. Switch Description position Light-ON mode is set when the switch is turned fully clockwise (L side). Dark-ON mode is set when the switch is turned fully counterclockwise (D side). 

## **Others** 

- Do not use during the initial transient time (50 ms) after the power supply is switched on. 

- Excess bending of the cable or stress applied to the cable may disconnect the internal lead wire. 

The tightening torque should be 0.2 N·m or less. 

**RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

289 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10** 

**EQ-500 MQ-W RX-LS200 RX** 

**EX-20 EX-30 EX-40 CX-440 EQ-30** 

## **DIMENSIONS (Unit: mm in)** 

The CAD data can be downloaded from our website. 

## **EX-11□  EX-11S□  EX-13□  EX-13S□  EX-19□  EX-19S□** 

Sensor 

**==> picture [157 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
10  Stability<br>0.394  indicator  3.5<br>6.45  (Green)  0.138<br>5.5  0.254  Operation 2.1 0.083<br>0.217  1.75  indicator<br>0.069  (Orange)<br>1.75  1.5<br>0.069  0.059<br>Beam-  4<br>receiving  0.157  11  14.5<br>part  0.433  0.571<br>4.5<br>0.177<br>6.5  2-ø2.2 ø0.087<br>0.256<br>mounting holes<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>Receiver<br>**----- End of picture text -----**<br>


**==> picture [162 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.5<br>0.138 10<br>2.1 0.394<br>0.083 5.5<br>0.217<br>1.75 0.069<br>1.75 0.069<br>4<br>0.157<br>14.5 11<br>0.571 0.433<br>4.5 Beam-<br>0.177 emitting<br>part<br>2-ø2.2 ø0.087 6.5<br>mounting holes 0.256<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>Emitter<br>**----- End of picture text -----**<br>


## **EX-11E□  EX-11SE□  EX-13E□  EX-13SE□  EX-19E□** 

Sensor 

**==> picture [187 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
Stability<br>indicator (Green)  10<br>Operation 0.394<br>indicator (Orange) 6.45<br>0.254<br>4.5  1.75<br>2.25  0.177  0.069  1.75  1.5<br>0.089  0.069  0.059<br>Beam-  4<br>receiving part  0.157  0.433 11  0.571 14.5<br>4.5<br>0.177<br>6.5  2-ø2.2 ø0.087<br>4.2  0.256  mounting holes<br>0.165<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long<br>Receiver<br>**----- End of picture text -----**<br>


**==> picture [210 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
10<br>0.394 4.5<br>1.75 0.069 0.177<br>2.25<br>1.75 0.069 0.089<br>4 Beam-<br>14.5 11 0.157 emitting<br>0.571 0.433 part<br>4.5<br>0.177<br>2-ø2.2 ø0.087 6.5<br>mounting holes 0.256 4.2<br>ø2.5 ø0.098 cable, 2 m 6.562 ft long 0.165<br>**----- End of picture text -----**<br>


**==> picture [35 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitter<br>**----- End of picture text -----**<br>


**==> picture [503 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-15  EX-17 Sensor EX-15E  EX-17E Sensor<br>0.138 3.5 2.1 0.083  Emitter 0.069 1.75 0.069 1.750.157 4   0.394 10  5.5 0.217  Receiver 6.45 10 0.3940.2540.217 5.5 0.069 1.75Incident beam indicator (Orange)Stability indicator (Green) 0.069 1.75  0.059 1.5  0.138 3.5  2.1 0.083  Emitter 0.069 1.75 0.069 1.75 0.157 4  0.394 10  Stability indicator (Green) Incident beam indicator (Orange)4.5 0.177 2.25 0.089  4.5 0.177 2.25 0.089  0.394 10  0.157 6.454 1.750.069 0.254 1.75 Receiver 0.069 0.059 1.5<br>0.571 14.5  0.433 11 Beam- emitting part  Beam- receiving part  4 0.157 0.433 11  4.5 0.571 14.5 0.177  0.571 14.5 0.433 11 Beam- emitting part  Beam- receivingpart  0.433 11 4.50.571 14.5 0.177<br>4.5  4.5<br>0.177  0.177  4.2  4.2<br>2-ø2.2 mounting holes ø0.087 2-ø2.2 mounting holes ø0.087 19.685 500  2-ø2.2 mounting holes ø0.087 0.165  0.165  500  2-ø2.2 mounting holes ø0.087<br>19.685<br>ø2.5 ø0.098 cables<br>15.2 0.598  ø2.5 ø0.098 cables<br>15.2 0.598<br>Operation indicator  19.2<br>(Orange)  0.756  Operation indicator  19.2<br>38  (Orange)  0.756<br>1.496  38<br>1.496<br>Operation mode switch<br>Operation mode switch<br>ø3.8 ø0.150 cable,<br>2 m 6.562 ft long  ø3.8 ø0.150 cable,<br>2 m 6.562 ft long<br>1 0.039  8<br>7  0.315  1 0.039  8<br>0.276  7  0.315<br>0.276<br>**----- End of picture text -----**<br>


**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

290 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**==> picture [502 x 14] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.<br>**----- End of picture text -----**<br>


**==> picture [502 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
EX-14□ Sensor<br>13<br>0.512<br>6.45  Stability indicator<br>0.254  2.75  (Green)  3.5<br>0.197 5  0.108 1.75 0.069  Operationindicator (Orange) 0.138  2.1 0.083<br>1.75  1.5<br>0.069  0.059<br>4.5<br>Beam- receiving  0.177  11  14.5<br>part  0.433  0.571<br>Beam-emitting part  4.5<br>0.177<br>8<br>0.315  2-ø2.2 ø0.087 mounting holes<br>ø2.5 ø0.098 cable,<br>2 m 6.562 ft long<br>**----- End of picture text -----**<br>


**==> picture [502 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-EX10-1 Sensor mounting bracket (Optional)<br>Assembly dimensions<br>t 0.047t 1.2 0.2997.6 Mounting drawing with  EX-14□<br>t 1.2 20 0.787 (0.7)<br>t 0.047 7.6 (0.028)<br>0.299<br>3.7<br>0.146<br>3.7 3.5 (4.9)<br>0.146 0.138 (0.193)<br>20 22.75 0.896<br>0.787 13<br>4-M2 × 0.4 0.016 6.5 8 3.5 0.512<br>thru-hole threads 0.256 0.315 0.138 2-ø3.4 ø0.134 mounting holes Beam- 0.1975  0.42310.750.3158 (8.8)3.50.138 0.0491.25<br>emitting (0.346)<br>11 8 15 part<br>0.433 0.315 0.591<br>Beam- 3 0.118 8 11 15<br>receiving 0.315 0.433 0.591<br>part<br>Material:  Cold rolled carbon steel (SPCC)<br>(Uni-chrome plated) 4.25 0.167<br>Two M2 (length 4 mm 0.157 in) pan head screws are attached.<br>2-ø3.4 ø0.134 mounting holes<br>**----- End of picture text -----**<br>


## **MS-EX10-2** 

**==> picture [150 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
t 1.2<br>t 0.047 7.6<br>0.299<br>6.25<br>0.246<br>20<br>0.787<br>3.2 1.4<br>0.126 0.055<br>11 8 15<br>0.433 0.315 0.591<br>2-M2 × 0.4 0.016<br>thru-hole threads 8 3.5<br>0.315 0.138<br>**----- End of picture text -----**<br>


Material:  Cold rolled carbon steel (SPCC) (Uni-chrome plated) 

Sensor mounting bracket (Optional) 

**==> picture [219 x 198] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>Mounting drawing with  EX-11E□  and  EX-13E□<br>(2.3)<br>t 1.2 0.2997.6 (0.091)<br>t 0.047<br>6.25 4.5 (7.45)<br>0.246 0.177 (0.293)<br>(1.3)<br>(0.051) 3.2<br>4  0.25 10 0.126 1.25<br>0.157  0.010 0.394 0.049<br>1.4<br>0.055<br>Beam-  2.5 0.098<br>0.59115 0.43311 receiving  0.3158<br>part<br>4.25<br>0.167<br>8 3.5<br>0.315 0.138<br>20<br>0.787<br>**----- End of picture text -----**<br>


**EX-Z CX-400 CY-100 EX-10** 

**EX-20 EX-30 EX-40** 

**CX-440 EQ-30 EQ-500 MQ-W RX-LS200** 

Two M2 (length 8 mm 0.315 in) pan head screws are attached. 

**RX RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

291 

The CAD data can be downloaded from our website. 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS 

SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS 

STATIC CONTROL DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparatedparatedarated 

## **DIMENSIONS (Unit: mm in)** 

## **MS-EX10-3** 

**==> picture [187 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
15<br>0.591<br>7 0.276 10.5<br>0.413<br>1.4 3.2<br>0.055 0.126<br>8<br>t 1.2 0.315 4-M2 × 0.4 0.016<br>t 0.047 thru-hole threads<br>10.8 6.5<br>0.425 0.256<br>11 2<br>0.433 0.079<br>**----- End of picture text -----**<br>


Material:  Cold rolled carbon steel (SPCC) 

(Uni-chrome plated) 

Two M2 (length 4 mm 0.157 in) pan head screws and two M2 (length 8 mm 0.315 in) pan head screws are attached. 

**==> picture [218 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>EX-14□<br>(2.75) 10.8 t 1.2<br>(0.108) 0.425 t 0.047<br>(0.7)<br>(0.028)<br>3.5 10.5<br>0.138 0.413 3.2<br>Beam-receiving part 0.51213 1.75 0.069 Beam-emitting part 0.2767 0.126<br>5 6.25 1.25<br>0.197 0.246 0.049 1.4<br>0.055<br>3 0.118<br>11 15 8<br>0.438 0.591 0.315<br>4.25<br>0.167<br>**----- End of picture text -----**<br>


**==> picture [96 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>**----- End of picture text -----**<br>


**==> picture [110 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-14□<br>**----- End of picture text -----**<br>


## **MS-EX10-11** 

Sensor mounting bracket (Optional) 

## **Assembly dimensions** 

**==> picture [110 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-14□<br>**----- End of picture text -----**<br>


**==> picture [168 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
t 1.2 8.1<br>t 0.047 0.319<br>3.7<br>0.146 20<br>0.787<br>4-M2 × 0.4 0.016 6.5 8 3.5<br>thru-hole threads 0.256 0.315 0.138 1.4 3.2<br>0.055 0.126<br>11 8 15<br>0.433 0.315 0.591<br>3.2 1.4<br>0.126 0.055<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are attached. 

**==> picture [202 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
20<br>t 1.2 0.787 8.1 (0.7)<br>t 0.047 0.319 (0.028)<br>(4.9)<br>(0.193)<br>3.7 3.5 22.75<br>0.146 0.138 13 0.896<br>0.512<br>0.1975 10.75 0.423 3.50.138<br>8 0.315<br>(9.3) 3.2 1.25<br>(0.366) 1.4 0.126 0.049<br>0.055<br>Beam-emitting part<br>3 0.118<br>8 11 15<br>0.315 0.433 0.591<br>Beam-receiving part<br>1.4 4.25<br>0.055 0.167<br>3.2<br>0.126<br>**----- End of picture text -----**<br>


**==> picture [371 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-EX10-12<br>**----- End of picture text -----**<br>


Sensor mounting bracket (Optional) 

**==> picture [280 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
Amplifier-<br>separatedparatedarated<br>t 1.2 8.1<br>t 0.047 0.319<br>EX-Z<br>6.25<br>CX-400 0.246<br>CY-100<br>20<br>EX-10  0.787<br>1.4<br>EX-20 0.055 3.2<br>0.126<br>EX-30<br>EX-40 11 8 15<br>0.433 0.315 0.591<br>CX-440<br>EQ-30 2-M2 × 0.4 0.016 1.4<br>thru-hole threads 0.055<br>EQ-500 3.2<br>0.126<br>MQ-W 8 3.5<br>0.315 0.138<br>RX-LS200 Material: Stainless steel (SUS304)<br>Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached.<br>**----- End of picture text -----**<br>


**==> picture [96 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>**----- End of picture text -----**<br>


**==> picture [236 x 194] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  EX-11E□  and  EX-13E□<br>��� �����<br>����� ����� �������<br>�������<br>���� ��� ������<br>����� ����� �������<br>�����<br>�������<br>�<br>����� ���� �� ���<br>����� ����� ����� ����� [����] ���<br>�����<br>������� ���������<br>������� ������� ���������� ������<br>�����<br>��� ����<br>����� �����<br>���<br>�����<br>� ���<br>����� �����<br>��<br>�����<br>**----- End of picture text -----**<br>


**RX** 

**RT-610** 

Ultra-slim Photoelectric Sensor **EX-10 SERIES Ver.2** 

292 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS 

HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated 

**EX-Z CX-400 CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610** 

## **DIMENSIONS (Unit: mm in)** 

**==> picture [224 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-EX10-13<br>7<br>10.5 0.276<br>0.413 3.2 0.126<br>1.4 0.055<br>1.4<br>0.055 8 3.2 0.126<br>0.315<br>15<br>t 1.2 0.591 4-M2 × 0.4 0.016<br>t 0.047 thru-hole threads<br>10.8<br>0.425 6.5 0.256<br>11 2<br>0.433 0.079<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached. 

The CAD data can be downloaded from our website. 

**==> picture [239 x 250] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor mounting bracket (Optional)<br>Assembly dimensions<br>Mounting drawing with  EX-14□<br>(2.75) 10.8 t 1.2<br>(0.108) 0.425 t 0.047<br>(0.7)<br>(0.028)<br>13 1.75<br>0.512 0.069 3.5<br>5 6.25 0.138 10.5<br>0.197 0.246 1.25 0.413 7<br>0.049 0.276 1.4 3.2<br>Beam-emitting 0.055 0.126<br>part<br>3 0.118<br>11 15 8<br>Beam-receiving 0.433 0.591 0.315<br>part<br>4.25 1.4<br>0.167 0.055<br>3.2<br>0.126<br>**----- End of picture text -----**<br>


PLC