ER1830NPAS-1

## **Photoelectrics Retro-reflective Type ER1830.PAS, DC, Metal-housing** 

- **Range: 3 m** 

- **Modulated infrared light** 

- **Supply voltage: 10 to 40 VDC** 

- **Output: 200 mA NPN or PNP** 

- **Make and break switching function, LED indication** 

- **Protection: Reverse polarity, short circuit, transients** 

- **High immunity to ambient light** 

- **Cable and plug versions** 

## **Product Descri tion p** 

**Orderin Ke g y** 

**p g y ER 18 30 NPA S-1** Retro-reflective pho to e lec tric tion. Short M18 metal hous- **Type** switch with extended range ing for heavy duty ap pli ca- **Housing diameter** up to 3 m. Easily adjustable tions. IP 67. Easy moun ting. **Range** sensitivity with 270° potenDC and AC types, fully pro- **Output type** tiometer. LED output in di catect ed. **Housing material** ~~a"~~ **Connection type T e Selection yp Housing Rated Ordering no. Ordering no. Ordering no. Or der ing no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug dist. (Sn) Make & break swit. Make & break swit. Make & break swit. Make & break swit.** M18 3 m **ER 1830 NPAS ER 1830 NPAS-1 ER 1830 PPAS ER 1830 PPAS-1** 

## **S ecifications p** 

|**Rated operating dist.**(Sn)|Up to 3 m|
|---|---|
|**Sensitivity**<br>Adjustable<br>**Temperature drift**|Ref. reflector type ER4<br>∅84 mm<br>270° single turnpot. meter<br>0.4%/K|
|**Hysteresis**(H)<br>(Differential travel)|3 to 20%|
|**Rated operational volt.**(UB)|10 to 40 VDC(ripple included)|
|**Ripple**(Urpp)|Max. 10%|
|**Output current**<br> Continuous (Ie)<br>Short-time (I)|Max.  200 mA<br>200 mA,|
||max. load capacity100 nF|
|**No load supply current**(IO)<br>**Min. operational current**(Im)<br>**OFF-state current**(Ir)|Max.  20 mA @ 200 mA<br>0.5 mA<br>Max. 100μA|
|**Voltage drop **(Ud)|Max. 2.5 V|
|**Protection**|Reversepolarity,short circuit|
||overload,transients|
|**Transient voltage **<br>**Power ON delay **(tv)<br>**Light source**|1 kV/0.5 J<br>Typ. 100 ms<br>GaAlAs LED,880 nm|
|**Light type **|Infrared,modulated|
|**Optical angle**|± 2.2°|



|**Light spot size**|150 mm at 2 m|
|---|---|
|**Ambient light**|Max. 10,000 lux|
|**Operating frequency **(f)|Max. 120 Hz,light/dark ratio 1:2|
|**Response time**||
|OFF-ON (tON)|≤ 3.2 ms|
|ON-OFF(tOFF)|≤ 5 ms|
|**Indication function**|Dark and light|
||(complementary switch)|
|Output ON|LED, yellow|
|**Environment**||
|Overvoltage category|III (IEC 60664/60664A; 60947-1)|
|Pollution degree|3 (IEC 60664/60664A; 60947-1)|
|Degree ofprotection|IP 67(IEC 60529;60947-1)|
|**Temperature**||
|Operating|-20° to +60°C (-4° to 140°F)|
|Storage|-30° to + 70°C(-22° to 158°F)|
|**Vibration**|10 to 150 Hz, 0.5 mm/7.5 g|
||(IEC 60068-2-6)|
|**Shock**|2 x 1 m & 100 x 0.5 m|
||(IEC 60068-2-32)|
|**Dielectric voltage**|600 VAC(IEC 60364-4-41)|
|**Housing material**||
|Body|Nickel plated brass|
|Front|Luran®, black|
|Cable end|Polyester, black|
|Nuts|Nickel plated brass|



**1** 

Specifications are subject to change without notice (08.08.2022) 

**ER1830.PAS, DC** 

## **Specifications (cont.)** 

## **Dimensions** 

|**Connection**||
|---|---|
|Cable<br>Plug<br>Cables forplug (-1)<br>**Weight**<br> Cable version<br>Plugversion<br>**Approvals**<br>~~ee~~|Grey,2 m, 4 x 0.35 mm2,<br>oilproof PVC<br>M12 x 1<br>CON.14NF.. series<br>140 g<br>55g<br>UL,CSA<br>~~_~~<br> — —— —~~——llllhlhlClllllt—~«*™Y~~|
|**CE-marking**<br>~~—~~|Yes|



## **O eration Di a ram p g** 

**==> picture [500 x 198] intentionally omitted <==**

**----- Start of picture text -----**<br>
Power supply<br>a<br>Object present, light beam in ter rupt ed ee<br>Output ON: Break switch ing (NC), WH (2) rt Tv 4<br>$ni eg<br>  Make switching (NO), BK (4) Tv<br>a<br>a |<br>Wiring Diagrams Detection Diagram<br>Sensor<br>1 BN + 1 BN + X ER4 Y (feet)<br>Reflector 1.6 3.3 4.9 6.6 8.2 9.8 11.5 13<br>4 BK 60.0 0.8<br>p c ond<br>2 WH 4 BK2 WH 30.0 ||| | | [7]|Pere)||Pere)|Pere)|| KAI|| 0.4<br>ip 3 BU - 3 BU - 0.0 |[7INEfet|[7INEfet|INEfet| of|| | | hd}|| UT||  ALVYVY 0<br>PNP NPN<br>(mm)<br>(inch)<br>**----- End of picture text -----**<br>


**==> picture [239 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>X ER4 Y (feet)<br>Reflector 1.6 3.3 4.9 6.6 8.2 9.8 11.5 13<br>60.0 0.8<br>c ond<br>|<br>30.0 ||| | [7]|Pere)||Pere)|Pere)|| KAI|| 0.4<br>0.0 fet|| of|| | | hd}|| UT||  ALVYVY 0<br>|[7INEfet|[7INEfet|INEfet|<br>-30.0 FP IN. | | |tT ULFTE A -0.4<br>-60.0 | | | | |! COC -0.8<br>0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0<br>Distance (m)<br>(mm)<br>(inch)<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [421 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/  Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch<br>power cables from any other power cables,<br>e.g. motor, contactor or solenoid cables<br>es Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as  Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


_Switch mounted on mobile carrier_ 

## **Deliver Contents y** 

- Photoelectric switch: ER1830 

- 2 nuts 

- **Packaging:** plastic bag 

## **Accessories** 

- Reflectors: ER series 

- Connector type CON.14NF.. series 

- MB18A 

- APA18-RAR 

**2** 

Specifications are subject to change without notice (08.08.2022)