EPBAD21

## Product Data Sheet EPBAD21 

Power Distribution Block 

## 115 Amps  600 Volts AC/DC 

## Wire Range 

- Line:    (1) 2 - #14 AWG (35 - 2.5 mm[2] ) 

- Load: (1) 2 - #14 AWG (35 - 2.5 mm[2] ) 

## Electrical Ratings 

- 115 Amps 

- 600V per UL 1953 & CSA 22.2 No.158, class B & C requirements 

- 1000 V AC/DC per IEC 60947-7-1 (CE) 

- Short circuit current ratings (SCCR): See SCCR section below for specifications. 

- CU7AL - 75°C connector terminal rating with copper or aluminum wire 

- Touch protection: IP-20 (IEC 60529) 

- Factory & Field Wiring 

## Agency Compliance 

- UL Listed, Investigated to UL 1953, File QPQS.E309401 

- CSA - certifed to C22.2 No. 158, File No. LR19766 (wire classes B & C only) 

- CE compliant to IEC 60947-7-1 

## Material Information 

- Insulator base: 

   - Thermoplastic 

   - Flammability rating of insulator base UL94V0 

   - Insulator base temperature rating: -40°C to 125°C (UL RTI) 

- Connector: aluminum, tin plated 

- Terminal set screws: steel, nickel plated 

- Connector mounting screws: steel, zinc plated 

- RoHS compliant 

A Regal Brand 

1 

www.marathonsp.com 

## Termination Specifications 

**==> picture [468 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wire Size Wires /<br>Line & Load Side Torque Wire Class (UL)  [1]<br>(CU Stranded) Terminal<br>ee<br>2 5.6 N·m(50 lbf·in) 1 B, C<br>4 - 6 5.1 N·m(45 lbf·in) 1 B, C, G, H, I (DLO)<br>8 4.5 N·m(40 lbf·in) 1 B, C, G, H, I (DLO)<br>O a [re]<br>10 - 14 4.0 N·m(35 lbf·in) 1 B, C, G, H, I (DLO)<br>ee<br>**----- End of picture text -----**<br>


- Wire strip length: 5/8 in. (16mm) 

- Terminal screw drive: 5/32 hex 

- IP-20 Protection: 2 - #14 AWG 

1 For information on copper stranded wire classes please reference: http://www.marathonsp.com/CatalogPDFs/Flexible-Stranded-Wire.pdf 

## Short Circuit Current Ratings (SCCR) 

- The suitable conductor ranges are limited to the table values only for achieving the SCCR in excess of the default rating of 10,000A. 

- Other conductor combinations within the “Terminal Specifications” noted are suitable for achieving a SCCR of 10,000A (the default rating of terminal blocks). 

- Enclosure size – Investigated with a minimum 10X8X4 enclosure.  Use in smaller enclosures is subject to end use evaluation. 

## SCCR With Fuses 

|Wire<br>Class|Suitable<br>Conductors|Suitable<br>Conductors|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|Max Overcurrent Protection Fuse Required<br>AmpRating/ Class|SCCR RMS<br>Sym. Amps<br>600V. Max|
|---|---|---|---|---|---|---|---|---|---|
||Line|Load|J|T|RK1|RK5|G|CC||
|B,C|2 - 14|2 - 14|175|225|100|60|60|30|100,000|
|G,H,I|4 - 14|4 - 14|175|225|100|60|60|30|100,000|
|(*)|2 - 14|2 - 14|None||||||10,000|



* Any wire class evaluated (see terminal specification section) 

PDS 0348 REV-H  12/19/17 

2 

www.marathonsp.com 

## SCCR With Circuit Breakers 

|Wire<br>Class|Suitable<br>Conductors<br>~~ee~~<br>~~P|~~|Suitable<br>Conductors<br>~~ee~~<br>~~P|~~|Overcurrent Protection Circuit Required<br>~~ee~~<br>|Overcurrent Protection Circuit Required<br>~~ee~~<br>|Overcurrent Protection Circuit Required<br>~~ee~~<br>|Overcurrent Protection Circuit Required<br>~~ee~~<br>|Voltage AC<br>Max|
|---|---|---|---|---|---|---|---|
||Line<br>~~P|~~|Load<br>~~P|tT~~|Manufacturer<br>~~tT~~|Type<br>~~tT~~<br>~~ee~~|Max Amperage<br>~~tT~~<br>~~ee~~|SCCR RMS sym<br>AMPs<br>~~tT~~<br>~~eee~~||
|B, C|2 - 4<br>~~P|~~|2 - 4<br>~~P|~~|Square D<br>|JDL32650<br><br>~~ee~~<br>~~ee~~|250<br><br>~~ee~~<br>~~ee~~|18kA<br><br>~~eee~~<br>~~ee~~|480|
|||||JGL36250<br>~~ee~~<br>~~ee~~<br>~~a~~|250<br>~~ee~~<br>~~ee~~<br>~~ee~~|35kA<br>~~eee~~<br>~~ee~~<br>~~ee~~||
|||||JJL36250<br>~~ee~~<br>~~a~~|250<br>~~ee~~<br>~~ee~~<br>~~ee~~|65kA<br>~~ee~~<br>~~ee~~<br>~~ee~~||
|||||JLL36250<br>~~a~~<br>~~ee~~<br>~~ee~~|250<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|65kA<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~||
|B,C|2 - 12|2 - 12|Square D|HDL36150<br>~~es~~<br>~~ee~~<br>~~ee~~|150<br>~~ee~~<br>~~es~~<br>~~ee~~<br>~~ee~~|18kA<br>~~ee~~<br>~~es~~<br>~~ee~~<br>~~ee~~|480|
|||||HGL36150<br>~~ee~~<br>~~ee~~<br>~~ee~~|150<br>~~ee~~<br>~~ee~~<br>~~ee~~|35kA<br>~~ee~~<br>~~ee~~<br>~~ee~~||
|||||HJL36150<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|150<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|65kA<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~||
|||||HLL36150<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|150<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~**ee**~~|65kA<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~**ee**~~||
|B,C|2 - 12|2 - 12|Square D|BDL36125<br>~~ee~~<br>~~ee~~<br>~~ee~~|125<br>~~ee~~<br>~~ee~~<br>~~**ee**~~|18kA<br>~~ee~~<br>~~ee~~<br>~~**ee**~~|480|
|||||BGL36125<br>~~ee~~<br>~~ee~~|125<br>~~ee~~<br>~~**ee**~~<br>~~ee~~|35kA<br>~~ee~~<br>~~**ee**~~<br>~~ee~~||
|||||BJL36125<br>~~ee~~<br>~~es~~|125<br>~~**ee**~~<br>~~es~~<br>~~ee~~|65kA<br>~~**ee**~~<br>~~es~~<br>~~ee~~||



PDS 0348 REV-H  12/19/17 

3 

www.marathonsp.com 

## Installation & Accessories 

- Mounting (Panel or DIN): 

   - For use with #10 fastener. 

   - Mounting torque to be determined in end use application not to exceed 30 lbf·in (3.4 N·m). 

- Din-Rail mountable on 7.5 X 35 mm rail. 

- When mounting blocks on Din rail, it is recommended to individually mount power blocks. Multi-line configurations become increasingly difficult to mount as the line length increases. 

- Marker cards: 

   - White plastic inserts: EPB Marker Card 

- Available drivers with part numbers are as follows: 

   - Armstrong Ind. hand tools - #37-703 or #10-745 

   - McMaster Carr - #5557A39 or #54875A46 

## Drawing 

PDS 0348 REV-H  12/19/17 

4 

www.marathonsp.com