Image not available
Illustrative purposes only
ENWF9208A1EF
WLAN Module, Wi-Fi, Bluetooth, Dual-Band 2.4 GHz/5 GHz, SDIO, HS UART, PCM
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PANASONIC
- Product type:
- SVHC: No SVHC (25-Jun-2025)
- Frequency RF: 5.925GHz
- Product Range: -
- Module Interface: SDIO, HS UART, PCM
- Module Applications: Home Gateways & Smart Energy, Multimedia Applications
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 10.8 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## PAN9026 Wi-Fi Dual Band 2.4 GHz/5 GHz and Bluetooth[®] Module Product Specification Rev. 1.3 Wireless Connectivity PAN9026 Wi-Fi/Bluetooth Module 1 About This Document ## **Overview** The PAN9026 is a 2.4 GHz and 5 GHz ISM band Wi-Fi and Bluetooth[®] radio module, which includes a wireless radio for easy integration of Wi-Fi and Bluetooth connectivity into various electronic devices. ## **Features** - [Dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n ] Wi-Fi/Bluetooth combined module - [Supports 802.11i security standards through ] AES, CCMP, and more security mechanisms - [802.11e Quality of Service is supported for ] multimedia applications - [IEEE 802.11n-compliant, 1×1 spatial stream with ] data rates up to MCS7 150 Mbps - [Bluetooth 5, includes Low Energy (LE) ] - [Dual simultaneous and independent WLAN and ] Bluetooth operation - [Dynamic Rapid Channel Switching (DRCS) for ] simultaneous operation in 2.4 GHz and 5 GHz bands - [Indoor location and navigation with ] IEEE 802.11mc - [Power management with sleep clock ] - [Coexistence interface for arbitration of ] co-located WLAN, Bluetooth, or Mobile Wireless System (e.g. LTE) - [Generic interfaces include SDIO 3.0 and ] high-speed UART for host processor connection - [Software Linux driver ] ## **Characteristics** - [Surface Mount Type (SMT): ] 17.5 mm x 10 mm x 2.6 mm - [Marvell][® ][88W8977 WLAN 2.4 GHz and 5 GHz ] and Bluetooth single-chip solution inside - [Tx Power: 16 dBm at 802.11b ] - [Rx Sensitivity: -98 dBm at 802.11b DSSS ] 1 Mbps - [IEEE 802.11n 20 MHz and 40 MHz ] channel bandwidth - [Long and Short Guard Interval support ] - [Power supply 3.3 V, 2.2 V, 1.8 V ] - [Current consumption Wi-Fi typical 400 mA at Tx ] and 70 mA at Rx - [SDIO 1-bit or 4-bit ] - [Wide temperature range of -30 °C to 85 °C ] ## **Block Diagram** Product Specification Rev. 1.3 Page 2 of 89 1 About This Document - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY 1 About This Document Panasonic By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design. © Panasonic Industrial Devices Europe GmbH 2021. This specification sheet is copyrighted. Reproduction of this document is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do not disclose it to a third party. All rights reserved. This Product Specification does not lodge the claim to be complete and free of mistakes. ## **Document Acceptance** By signing the Product Specification, you acknowledge that you are a legal representative for your company and that you understand and accept the validity of the contents herein. If the signed version of the Product Specification has not been returned to Panasonic within 30 days after receipt of the product, the specification or approval sheet shall be deemed to be accepted by you. ## **Engineering Samples (ES)** If Engineering Samples are delivered to the customer, these samples have the status “Engineering Samples”. This means that the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and they may differ from the published Product Specification. Engineering Samples are not qualified and they are not to be used for reliability testing or series production. ## **Disclaimer** The customer acknowledges that samples may deviate from the Product Specification and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by: - The use of the Engineering Sample other than for evaluation purposes, particularly the installation or integration in another product to be sold by the customer, - Deviation or lapse in function of the Engineering Sample, - Improper use of the Engineering Sample. - Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental damages. In case of any queries regarding the Engineering Samples, please contact your local sales partner or the related product manager. Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental damages. In case of any queries regarding the Engineering Samples, please contact your local sales partner or the related product manager. Product Specification Rev. 1.3 Page 3 of 89 1 About This Document - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY 1 About This Document Panasonic ## **Table of Contents** |**1**|**About This Document ......................................................................................................................... 6**|**About This Document ......................................................................................................................... 6**| |---|---|---| ||1.1|Purpose and Audience .............................................................................................................. 6| ||1.2|Revision History ......................................................................................................................... 6| ||1.3|Use of Symbols ......................................................................................................................... 7| ||1.4|Related Documents ................................................................................................................... 7| |**2**|**Overview .............................................................................................................................................. 8**|| ||2.1|Block Diagram ........................................................................................................................... 9| ||2.2|Pin Configuration ..................................................................................................................... 10| ||2.3|Power Management................................................................................................................. 14| ||2.4|Host Interfaces ........................................................................................................................ 15| ||2.5|Peripheral Bus Interface .......................................................................................................... 15| ||2.6|PCM Interface .......................................................................................................................... 16| ||2.7|Coexistence ............................................................................................................................. 16| ||2.8|WLAN ...................................................................................................................................... 26| ||2.9|Bluetooth ................................................................................................................................. 34| |**3**|**Detailed Description ......................................................................................................................... 36**|| ||3.1|Dimensions .............................................................................................................................. 36| ||3.2|Footprint .................................................................................................................................. 37| ||3.3|Packaging ................................................................................................................................ 38| ||3.4|Case Marking .......................................................................................................................... 41| |**4**|**Specification ..................................................................................................................................... 42**|| ||4.1|Default Test Conditions ........................................................................................................... 42| ||4.2|Absolute Maximum Ratings ..................................................................................................... 42| ||4.3|Recommended Operating Conditions ...................................................................................... 43| ||4.4|Current Consumption............................................................................................................... 45| ||4.5|RF Electrical Characteristics .................................................................................................... 57| ||4.6|Reliability Tests ....................................................................................................................... 66| ||4.7|Recommended Soldering Profile ............................................................................................. 67| |**5**|**Cautions ............................................................................................................................................ 68**|| ||5.1|Design Notes ........................................................................................................................... 68| ||5.2|Installation Notes ..................................................................................................................... 68| ||5.3|Usage Condition Notes ............................................................................................................ 69| ||5.4|Storage Notes .......................................................................................................................... 69| ||5.5|Safety Cautions ....................................................................................................................... 69| ||5.6|Other Cautions ........................................................................................................................ 70| ||5.7|Restricted Use ......................................................................................................................... 71| |**6**|**Regulatory and Certification Information ....................................................................................... 72**|| ||6.1|Federal Communications Commission (FCC) for US .............................................................. 72| ||6.2|Innovation, Science, and Economic Development (ISED) for Canada .................................... 76| ||6.3|European Conformity According to RED (2014/53/EU) ........................................................... 84| ||6.4|Bluetooth ................................................................................................................................. 87| ||6.5|RoHS and REACH Declaration ............................................................................................... 87| Product Specification Rev. 1.3 Page 4 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY 1 About This Document Panasonic |**7**|**Appendix ........................................................................................................................................... 88**|**Appendix ........................................................................................................................................... 88**| |---|---|---| ||7.1|Ordering Information ................................................................................................................ 88| ||7.2|Contact Details ........................................................................................................................ 89| Product Specification Rev. 1.3 Page 5 of 89 > PAN9026 Wi-Fi/Bluetooth Module 1 About This Document ## INDUSTRY 1 About This Document Panasonic ## **1 About This Document** ## **1.1 Purpose and Audience** This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN9026 module. It is intended for hardware design, application, and Original Equipment Manufacturers (OEM) engineers. The product is referred to as “the PAN9026” or “the module” within this document. ## **1.2 Revision History** |**Revision**|**Date**|**Modifications/Remarks**| |---|---|---| |1.0|2017-12-20|First version| |1.1|2018-07-03|Renamed section in chapter “Restricted Use“.<br>Moved section in chapter “Life Support Policy”.<br>Added section in chapter “Restricted End Use“.<br>Added additional models “Ordering Information“.| |1.2|2019-06-24|Changed picture in chapter “Power Configuration Example with 3.3 V Host<br>Operation“.<br>Added table in chapter “Channel Tables based on Regulatory<br>Domain/Country“.<br>Changed storage temperature in chapter “Absolute Maximum Ratings“.<br>Changed power-up in chapter “Power-up Sequence“.<br>Updated chapter “Cautions“.<br>Added section in chapter “Regulatory and Certification Information“.<br>Added additional models in chapter “Ordering Information“.<br>Formal and structure changes.| |1.3|2021-03-12|Updated disclaimer. Updated formatting and structure.<br>Updated pictures: “Block Diagram”, “Footprint”, “Pin Assignment”.<br>Updated WLAN encryption in chapter “WLAN”. Updated EN numbers in<br>chapter “European Conformity According to RED (2014/53/EU)”.<br>Added model “ENWF9201AVEF” in chapter “Ordering Information“.<br>New design.| Product Specification Rev. 1.3 Page 6 of 89 > 1 About This Document Panasonic - - > PAN9026 Wi-Fi/Bluetooth Module ## **1.3 Use of Symbols** |**Symbol**|**Description**| |---|---| ||**Note**<br>Indicates important information for the proper use of the product.<br>Non-observance can lead to errors.| |A|**Attention**<br>Indicates important notes that, if not observed, can put the product’s functionality<br>at risk.| |[chapter number]<br>[chapter title]|**Cross reference**<br>Indicates cross references within the document.<br>**Example:**<br>Description of the symbols used in this document1.3 Use of Symbols.| ## **1.4 Related Documents** For related documents please refer to the Panasonic website 7.2.2 Product Information. Product Specification Rev. 1.3 Page 7 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **2 Overview** The PAN9026 is a dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n Wi-Fi radio module with integrated Bluetooth BR/EDR/LE, specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards enables high data rates (802.11n) and low-power operation (Bluetooth LE). Integrated power management, a fast dual-core CPU, 802.11i security standard support, and high-speed data interfaces deliver the performance for the speed, reliability, and quality requirements of next generation products. Tx power calibration data and Wi-Fi/Bluetooth system parameters are pre-stored on the one-time-programmable memory of the PAN9026 during production at Panasonic. This simplifies passing the certification process for PAN9026 customers. Furthermore, the module reduces design, test, and calibration effort resulting in reduced time-to-market compared to discrete solutions. Integrating Wi-Fi and Bluetooth wireless connectivity allows applications such as Smart Energy and home gateways to manage multiple devices and appliances. The combination of Wi-Fi and Bluetooth provides the highest flexibility for connectivity. For related documents please refer to 7.2.2 Product Information. For further information on the variants and versions please refer to 7.1 Ordering Information. Product Specification Rev. 1.3 Page 8 of 89 2 Overview PAN9026 Wi-Fi/Bluetooth Module ## **2.1 Block Diagram** Product Specification Rev. 1.3 Page 9 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 2 Overview ## **2.2 Pin Configuration** ## **Pin Assignment** ## Top View G1 G2 G3 G4 G5 G6 G7 G8 G9 ©8808 88C®O F1 F2 F3 F4 F5 F6 F7 F8 F9 ©0008 88C®0 E1 E2 E3 E4 E9 eeee i e **Ground Plane** ~~D1 D2 D3 D4 EP1 EP2 D9~~ ~~**Keep out Area**~~ C1 C2 C3 C4 C9 eee0e ase B1 B2 B3 B4 B5 B6 B7 B8 B9 COC HCOCHOC® 7 A1 A2 A3 A4 A5 A6 A7 A8 A9 Beeeeeeee ## **Pin Functions** |**No.**|**Pin Name**|**Pin Type**|**Description**| |---|---|---|---| |A11|PCM_DOUT|Output signal|PCM data output signal| ||IO5|Digital I/O|General Purpose I/O: GPIO[5]| |A2|32KHZ_IN|NC|Do not connect| |A3|PDN|Input signal|Power down (active-low) is derived from VDD1V8, can accept an<br>input signal of 1.8 V to 3.6 V (external pull-up resistor), it can be<br>driven by the host and must be high for normal operation.| |A4|VDD1V8|Power|1.7 V to 1.9 V (typ. 1.8 V) power supply connection| |A5|VDD1V8|Power|1.7 V to 1.9 V (typ. 1.8 V) power supply connection| |A6|VDD2V2|Power|2.1 V to 2.3 V (typ. 2.2 V) power supply connection| |A7|RF_SW1|Input signal|RF Switch Pin 1: logical voltage level to activate on-board antenna<br>or RF Pad RF-Switch Pins Function| |A8|GND|Ground pin|Connect to ground| |A9|RF_OUT|RF port|50bottom pad to be activated by RF_SW1/RF_SW2 control<br>voltage RF-Switch Pins Function| 1 Multi-purpose pins: After the firmware download, the pins (GPIO, Serial Interface, RF control) are programmed in functional mode with dedicated functionality. Product Specification Rev. 1.3 Page 10 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**No.**|**Pin Name**|**Pin Type**|**Description**| |---|---|---|---| |B11|PCM_CLK|I/O|PCM clock signal, output if PCM master, input if PCM slave| ||IO6|Digital I/O|General Purpose I/O: GPIO[6]| |B21|PCM_DIN|Input signal|PCM data input signal| ||IO4|Digital I/O|General Purpose I/O: GPIO[4]| |B31|PCM_SYNC2|I/O|PCM Sync Pulse signal, output if PCM master, input if PCM slave| ||IO73|Digital I/O|General Purpose I/O: GPIO[7]| |B4|32KHZ_EN|Input signal|If using VIO3.3 V disable the internal 32.768 kHz crystal oscillator<br>(100to GND) to use the SoC reference clock with lower<br>accuracy| |B5|VDD2V2|Power|2.1 V to 2.3 V (typ. 2.2 V) power supply connection| |B6|VDD2V2|Power|2.1 V to 2.3 V (typ. 2.2 V) power supply connection| |B7|RF_SW2|Input signal|RF Switch Pin 2: logical voltage level to activate on-board antenna<br>or RF Pad RF-Switch Pins Function| |B8|GND|Ground pin|Connect to ground| |B9|GND|Ground pin|Connect to ground| |C1|IO2|Digital I/O|General Purpose I/O: GPIO[2]| ||DVSC[0]|Output signal|Digital voltage scaling control for PMIC (VOUT2.2 V)<br>2.3.1 Power Configuration Example with 3.3 V Host Operation| |C2|IO3|Digital I/O|General Purpose I/O: GPIO[3]| ||DVSC[1]|Output signal|Digital voltage scaling control for PMIC (VOUT1.05 V) (not used)| |C3|IO1|Digital I/O|General Purpose I/O: GPIO[1]| |C4|COEX_SIN|Input signal|Serial data input from MWS modem or peripheral device| |C9|GND|Ground pin|Connect to ground| |D1|IO15|Digital I/O|General Purpose I/O: GPIO[15]| |D2|IO14|Digital I/O|General Purpose I/O: GPIO[14]| |D3|DNC_E3|NC|Do not connect| |D4|COEX_SOUT|Output signal|Serial data output to MWS modem or peripheral device| |D9|GND|Ground pin|Connect to ground| |E1|SD_CLK|Digital I/O|For SDIO specific terminalsSDIO Pins Function| |E2|SD_CMD|Digital I/O|For SDIO specific terminals SDIO Pins Function| |E3|IO0|Digital I/O|General Purpose I/O: GPIO[0]| |E4|DNC_E4|NC|Do not connect| 2 PCM Mode: After enabling the mode by host command, the pin is used as PCM Audio Interface. - 3 GPIO Mode: After enabling the mode by host command, the pin is used as Multi-Purpose Interface. Product Specification Rev. 1.3 Page 11 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**No.**|**Pin Name**|**Pin Type**|**Description**| |---|---|---|---| |E9|GND|Ground pin|Connect to ground| |F1|SD_DAT0|Digital I/O|For SDIO specific terminals SDIO Pins Function| |F2|SD_DAT1|Digital I/O|For SDIO specific terminals SDIO Pins Function| |F31|UART_SOUT4|Output signal|Serial data output to peripheral device| ||IO83|Digital I/O|General Purpose I/O: GPIO[8]| ||BT_FREQ5|Input signal|Information Bluetooth using channel which overlaps WLAN<br>channel or not| |F41|UART_SIN4|Input signal|Serial data input to peripheral device| ||IO93|Digital I/O|General Purpose I/O: GPIO[9]| ||BT_STATE5|Input signal|Information BT_REQ priority (1-bit or 2-bit) and direction Bluetooth<br>Rx/Tx| |F51|UART_RTS4|Output signal|Request-to-Send output to peripheral device| ||IO113|Digital I/O|General Purpose I/O: GPIO[11]| ||BT_REQ5|Input signal|Bluetooth device request access to medium| |F6|IO12|Digital I/O|General Purpose I/O: GPIO[12]| |F7|CNTL1|Output signal|Do not connect| |F8|CNTL0|Input signal|Keep open (DNC) if using SDIO interface for Bluetooth or connect<br>with 100 kto GND if using UART interface for Bluetooth<br>Control Pin Function| |F9|GND|Ground pin|Connect to ground| |G1|SD_DAT2|Digital I/O|For SDIO specific terminals SDIO Pins Function| |G2|SD_DAT3|Digital I/O|For SDIO specific terminals SDIO Pins Function| |G3|VIOSD|Power|1.8 V or 3.3 V Digital I/O SDIO power supply| |G4|VIO|Power|1.8 V or 3.3 V power supply for General Purpose I/O, if using VIO<br>3.3 V disable the internal 32.768 kHz crystal oscillator (pin no. B4)| |G51|UART_CTS4|Input signal|Clear-to-send input from peripheral device| ||IO103|Digital I/O|General Purpose I/O: GPIO[10]| ||BT_GRANT5|Output signal|Indicate permission to transmit, low Bluetooth can transmit| |G6|IO13|Digital I/O|General Purpose I/O: GPIO[13]| |G7|VIORF|Power|3 V to 3.6 V (typ. 3.3 V) power supply connection| |G8|DNC|NC|Do not connect| 4 UART mode: After the dedicated firmware download, the pin is used as host controller interface (HCI) for Bluetooth. 5 Bluetooth External Coexistence Mode: After enabling the mode by host command, the pin is used as Bluetooth external Coexistence Interface. Product Specification Rev. 1.3 Page 12 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**No.**|**Pin Name**|**Pin Type**|**Description**| |---|---|---|---| |G9|GND|Ground pin|Connect to ground| |EP1|EPAD1|Thermal pin|Connect to ground| |EP2|EPAD2|Thermal pin|Connect to gorund| ## **SDIO Pins Function** |**No.**|**Pin Name**|**Pin Type**|**Description**|**Description**| |---|---|---|---|---| ||||**4-Bit Mode**|**1-Bit Mode**| |E1|SD_CLK|Digital I/O|Clock|Clock| |E2|SD_CMD|Digital I/O|Command Line|Command Line| |F1|SD_DAT0|Digital I/O|Data Line bit [0]|Data Line| |F2|SD_DAT1|Digital I/O|Data Line bit [1] or Interrupt<br>(optional)|Interrupt| |G1|SD_DAT2|Digital I/O|Data Line bit [2] or Read Wait<br>(optional)|Read Wait (optional)| |G2|SD_DAT3|Digital I/O|Data Line bit [3]|Not used| ## **RF-Switch Pins Function** |**No.**|**Pin Name**|**Pin Type**|**Logical Level for Activation**|**Logical Level for Activation**| |---|---|---|---|---| ||||**On-Board Chip Antenna**|**RF OUT Pin**| |A7|RF_SW1|Input signal|3 V to 3.6 V (typ. 3.3 V)|GND (0 V)| |B7|RF_SW2|Input signal|GND (0 V)|3 V to 3.6 V (typ. 3.3 V)| ## **Control Pin Function** The control pin is used as configuration input to set parameters following a reset. The definition of the pin changes immediately after a reset to its usual function. To set a configuration bit to 0 bit, a 100 k resistor must be attached from the pin to ground. No external circuitry is required to set a configuration bit to 0 bit. The configuration of the control pin is used for the firmware boot option. The software reads and boots accordingly. Product Specification Rev. 1.3 Page 13 of 89 2 Overview ## PAN9026 Wi-Fi/Bluetooth Module |**No.**|**Pin**<br>**Name**|**Pin Type**|**Strap**<br>**Value**|**WLAN**|**Bluetooth/**<br>**Bluetooth**<br>**LE**|**Firmware Download**|**Firmware Download**|**Number SDIO**<br>**Functions**| |---|---|---|---|---|---|---|---|---| |||||||**Type**|**Mode**|| |F8|CNTL0|Input Signal|0 SDIO|0 SDIO|UART|SDIO+UART|Parallel/Serial 1 (WLAN)|Parallel/Serial 1 (WLAN)| ||||1 SDIO|1 SDIO|SDIO|SDIO+SDIO|Parallel/Serial 2 (WLAN,|Parallel/Serial 2 (WLAN,<br>Bluetooth)| ## **2.3 Power Management** ## **2.3.1 Power Configuration Example with 3.3 V Host Operation** ## **2.3.2 Power Configuration Example with 1.8 V Host Operation** For further information please refer to 4.4.2 Power-up Sequence. Product Specification Rev. 1.3 Page 14 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview ## **2.4 Host Interfaces** The bus interface connects several host interface bus units to the CPU bus of the device through the internal bus. The connection of each unit is multiplexed with other bus units. The high-speed UART interface is connected to the CPU bus through a separate bus. |**Type**|**Features**| |---|---| |High-speed UART interface|The device supports a high-speed Universal Asynchronous<br>Receiver/Transmitter (UART) interface, compliant with the industry<br>standard 16550 specification.<br>•FIFO mode permanently selected for transmit and receive operations<br>•Two pins for transmit and receive operations<br>•Two flow control pins<br>•Interrupt triggers for low-power, high throughput operation| |SDIO interface|The device supports an SDIO device interface that conforms to the<br>industry standard SDIO full-speed card specification and allows a host<br>controller using the SDIO bus protocol to access the device.<br>•Supports SDIO 3.0 Standard<br>•1-bit SDIO or 4-bit SDIO transfer modes with full clock range up to<br>100 MHz<br>•On-chip memory used for CIS<br>•Special interrupt register for information exchange<br>•Allows card to interrupt host| For further information please refer to 4.4.3 Host Interface. ## **2.5 Peripheral Bus Interface** The Peripheral Bus Unit (PBU) connects several low speed peripherals to the internal bus of the device. The device consists of the GPIO Interface and the One Time Programmable Memory. |**Type**|**Features**| |---|---| |General Purpose I/O<br>(GPIO) Interface|•User-defined GPIOs (each configured to either input or output)<br>•Each GPIO controlled independently<br>•Each I/O configurable to output bit from GPIO_OUT| |One Time Programmable<br>Memory (OTP)|•Storing device-specific calibration data and hardware information like<br>MAC/BD address, WLAN, and Bluetooth parameter<br>•Programmed during production process of device<br>•Device performs calibration when it is powered up| For further information please refer to 4.4.4 Peripheral Interface. Product Specification Rev. 1.3 Page 15 of 89 INDUSTRY Panasonic 2 Overview PAN9026 Wi-Fi/Bluetooth Module - - > ## **2.6 PCM Interface** The device supports the PCM interface. |**Type**|**Features**| |---|---| |PCM Interface|•Master or slave mode<br>•PCM bit width size of 8 bits or 16 bits<br>•Up to four slots with configurable bit width and start positions<br>•Short frame and long frame synchronization| For further information please refer to 4.4.5 Audio Interface: PCM Interface. ## **2.7 Coexistence** The implemented coexistence framework is based on the IEEE 802.15.2 recommended practice Packet Traffic Arbitration (PTA) scheme and the Bluetooth Special Interest Group (Bluetooth SIG) Core Specification Volume 7 (Wireless Coexistence Volume). ## **2.7.1 WLAN/Bluetooth Channel Information Exchange** Since Bluetooth and IEEE 802.11 b/g/n WLAN use the same 2.4 GHz frequency band, each can cause interference with another. The level of interference depends on the respective frequency channel used by Bluetooth and WLAN (other factors can impact interference, like Tx power and Rx sensitivity of the device). In a system with both Bluetooth and WLAN, the common host receives information about WLAN channel usage and passes the information to the Bluetooth device. For Bluetooth 1.2 devices with Adaptive Frequency Hopping (AFH) enabled, the Bluetooth device can block channel usage that overlaps the WLAN channel in use. When the Bluetooth device avoids all channels used by the WLAN, the impact of interference is reduced, but not completely eliminated. For Bluetooth 1.1 devices, the Bluetooth device cannot block WLAN channel usage. In this case, a Bluetooth Coexistence Arbiter (BCA) scheme at MAC level is required. The BCA scheme can also be used with Bluetooth 1.2 devices to further reduce the impact of interference to a minimum. ## **2.7.2 External Mobile Wireless System (LTE/ZigBee[®] ) and BCA Exchange** Based on the Bluetooth SIG Wireless Coexistence Volume, the device supports a Wireless Coexistence Interface 2 (WCI-2) protocol for WLAN and Bluetooth coexistence with an external Mobile Wireless System (MWS), such as a Long Term Evolution (LTE) or ZigBee device. WCI-2 is a 2-wire transport interface. An internal coexistence is used to exchange request/grant with the BCA. Product Specification Rev. 1.3 Page 16 of 89 PAN9026 Wi-Fi/Bluetooth Module 2 Overview - - > ## Panasonic 2 Overview ## **2.7.3 System Configuration** ## External MWS Device **==> picture [383 x 240] intentionally omitted <==** **----- Start of picture text -----**<br> RF Front End<br>BCA BT<br>CTL<br>Bluetooth<br>BCA WLAN<br>WLAN CTL<br>BCA<br>MAC<br>MWS to BCA COEX SIN<br>External LTE<br>Device<br>BCA to MWS COEX SOUT<br>88W8977 Radio SoC<br>Host<br>**----- End of picture text -----**<br> ## External BCA Device **==> picture [368 x 114] intentionally omitted <==** **----- Start of picture text -----**<br> BT REQ<br>BT STATE BCA WLAN CTL WLAN<br>BCA<br>MAC<br>BT FREQ<br>BT GRANTn<br>88W8977 Radio SoC External BCA Device<br>**----- End of picture text -----**<br> Product Specification Rev. 1.3 Page 17 of 89 2 Overview PAN9026 Wi-Fi/Bluetooth Module **==> picture [4 x 1] intentionally omitted <==** **----- Start of picture text -----**<br> <br>**----- End of picture text -----**<br> ## **2.7.4 WCI-2 Interface** The coexistence interface includes a Mobile Wireless System (MWS) transport controller to accommodate a 2-wire, UART-based serial transport interface. This interface is a standard full-duplex UART (TXD and RXD) carrying logical signals framed as UART characters. In addition, it allows support of multiple logical channels. ## **Interface Signals** |**Pin No.**|**Signal Name**|**Specification**<br>**Name**|**Pin Type**|**Description**| |---|---|---|---|---| |C4|COEX_SIN|RXD|Input|Serial data from external MWS device| |D4|COEX_SOUT|TXD|Output|Serial data to external MWS device| ## **Signal Waveform Format** The messaging is based on a standard UART format. The UART signals should be connected like a null-modem. For example, the local TXD connected to the remote RXD and vice versa. ## **Interface Transport Settings** |**Item**|**Range **|**Comment**| |---|---|---| |Baudrate|921 600 to 4 000 000 Baud|921 600 to 4 000 000 Baud| |Data Bits|8 LSB first|8 LSB first| |ParityBits|0 No|0 Noparity| |StopBit|1 One sto|1 One stopbit| |Flow Control|No|No flow control| ## **Supported Baud Rates** |**Baud**|||| |---|---|---|---| |921 600|2 000 000|3 000 000|4 000 000| Product Specification Rev. 1.3 Page 18 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **Real-Time Signaling Message** The real-time signaling message is used to transport real-time signals over the 2-wire transport interface. The real-time signaling message conveys the real-time signals (Bluetooth Core Specification, Volume 7, Part A) in one message. The time reference point for the real-time signaling message is the end of message bit 5 (transition to stop bit). Defined real-time signaling messages include: - Coexistence Controller to MWS device - MWS device to Coexistence Controller **==> picture [413 x 106] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||| |---|---|---|---|---|---| |Real-Time|MSG[0]|MSG[1]|MSG[2]|MSG[3]|MSG[4]| |Signaling| |MWS to|FRAME_SYNC MWS_RX|MWS_TX|PATTERN[0]|PATTERN[1]| |Coexistence| |Controller (Signal)| |Coexistence|BT_RX_PRI|BT_TX_ON|802_RX_PRI|802_TX_ON|RFU| |Controller to MWS| |(Message)| **----- End of picture text -----**<br> **Signal Name** FRAME_SYNC MWS_RX MWS_TX PATTERN[1,0] BT_RX_PRI BT_TX_ON 802_RX_PRI 802_TX_ON MWS_INACTIVITY_DURATION MWS_SCAN_FREQUENCY_OFFSET Product Specification Rev. 1.3 Page 19 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview ## **Transport Control Message** The transport control messages can modify the state and request state information of the MWS coexistence interface. |**Message **|**MSG[0]**|**MSG[1]**|**MSG[2]**|**MSG[3]**|**MSG[4]**| |---|---|---|---|---|---| |Transport<br>Control<br>Message|RESEND_REAL<br>_TIME|RFU|RFU|RFU|RFU| |**Signal Name**|**Description**| |---|---| |RESEND_REAL_TIME|This bit is set if a device wants to get a status update of the real-time signals.<br>The signal is usually used after wake-up from sleep of the transport interface<br>to get an update of the real-time signals.<br>If the receiving device’s transport interface is awake it shall send a real-time<br>message with the current status of the real-time signals within four UART<br>character period. If the signal is not transmitted within four UART character<br>periods, the device is considered asleep.<br>If the receiving device’s transport interface is not awake it shall not send a<br>real-time message.<br>Bluetooth initiated:<br>If the MWS is currently scanning or has an ongoing inactivity duration, the<br>MWS shall send a frequency scan message or an inactivity duration message<br>after transmitting the real-time message.<br>If the receiving device’s transport interface is not awake it shall not send a<br>frequency scan or inactivity duration message.| If the MWS is currently scanning or has an ongoing inactivity duration, the MWS shall send a frequency scan message or an inactivity duration message after transmitting the real-time message. If the receiving device’s transport interface is not awake it shall not send a frequency scan or inactivity duration message. ## **Transparent Data Message** The transport control messages can modify the state and request state information of the MWS coexistence interface. |**Message **|**MSG[0]**|**MSG[0]**|**MSG[1]**|**MSG[2]**|**MSG[3]**|**MSG[4]**| |---|---|---|---|---|---|---| |Transparent Data|NIBBLE_POSI||DATA[0]/|DATA[1]/|DATA[2]/|DATA[3]/| |Message|TION|TION|DATA[4]|DATA[5]|DATA[6]|DATA[7]| |||||||| |**Signal Name**||**Description**||||| |NIBBLE_POSITION|NIBBLE_POSITION|0 = least significant nibble||||| |||1 = most significant nibble||||| |DATA[n]; n=0 … 7||Data bits of the message octet||||| Product Specification Rev. 1.3 Page 20 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **MWS Inactivity Duration Message** The inactivity duration messages is used to send the signal MWS_INACTIVITY_DURATION from the MWS device to the Coexistence Controller. |**Message **|**MSG[0]**|**MSG[1]**|**MSG[2]**|**MSG[3]**|**MSG[4]**| |---|---|---|---|---|---| |MWS Inactivity<br>Duration Message|DURATION[0]|DURATION[1]|DURATION[2]|DURATION[3]|DURATION[4]| The idle duration is encoded in 5 bits given by the formula: Inactivity_Duration = DURATION * 5 ms Inactivity durarations smaller than 5 ms are not communicated. If all bits are set to “1”, the inactivity duration is infinite. If all bits are set to “0” and signal MWS_RX, or signal MWS_TX are set to “1”, the inactivity period ends. ## **MWS Scan Frequency Offset Message** The MWS scan frequency offset message is used to send the signal “MWS_SCAN_FREQUENCY_ OFFSET” from the MWS device to the Coexistence Controller. |**Message **|**MSG[0]**|**MSG[1]**|**MSG[2]**|**MSG[3]**|**MSG[4]**| |---|---|---|---|---|---| |MWS Scan<br>Frequency Offset|BAND|FREQ[0]|FREQ [1]|FREQ [2]|FREQ [3]| The RF scan frequency is encoded in 5 bits given by the formula: RF_FREQ_OFFSET = FREQ * 10 MHz If BAND is set to “0”, the signal “RF_FREQ_OFFSET” is the negative value from the lower edge of the ISM band. If BAND is set to “1”, signal “RF_FREQ_OFFSET” is the positive value from the top edge of the ISM band. FREQ set to all “0”, indicates the end of the scan period. Product Specification Rev. 1.3 Page 21 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **2.7.5 Bluetooth Coexistence Arbiter** |**Type**|**Features**| |---|---| |Capability|•Programmable coexistence interface timing, interface modes, and signal<br>polarity to support a variety of external Bluetooth devices<br>•Programmable decision policies and transaction lock behavior for various<br>use cases<br>•Interface with external or on-chip Bluetooth device<br>•Supports Bluetooth 1.1 or Bluetooth 1.2 AFH<br>•WLAN-coordinated/Bluetooth-coordinated low-power design<br>•Enhanced information sharing between WLAN and Bluetooth for<br>combined systems<br>•WLAN/Bluetooth/MWS (LTE/ZigBee) coexistence support| |Arbitration|•Contention resolved by a customizable decision matrix that allows<br>independent grant decision for each device<br>•Vectors for the decision matrix:<br>−WLAN priority (2-bit)<br>−WLAN direction<br>−Bluetooth priority (1-bit or 2-bit)<br>−Bluetooth direction<br>−Bluetooth frequency in/out band<br>−MWS priority (2-bit)<br>−MWS direction| |AFH|If AFH is enabled in the Bluetooth device, and there is a sufficient<br>guard-band outside the WLAN operating frequency, the Bluetooth device<br>uses the Out-Of-Band (OOB) channel with respect to the WLAN device.<br>Otherwise, the Bluetooth device uses the In-Band (IB) and OOB channels<br>with respect to the WLAN device.<br>The IB and OOB information is either provided by the Bluetooth device<br>through the coexistence interface, or it can be provided through firmware<br>controls in a shared-host system. IB/OOB is a vector in the decision matrix.| |Transaction Stopping|The arbiter allows control of what transfers can be stopped after an initial<br>grant. If allowed, a transaction can be stopped for higher priority request.<br>A transaction stop decision is a function of the decision policies and<br>transaction stopping control. The transaction stopping control is configurable<br>per device and direction.| |Decision Policies|System configuration is a major consideration when planning decision<br>policies. The configuration governs how RF paths are shared and how much<br>interference will occur. Interference combinations include:<br>•WLAN Tx and Bluetooth Tx<br>•WLAN Tx and Bluetooth Rx<br>•WLAN Rx and Bluetooth Tx<br>•WLAN Rx and Bluetooth Rx| Product Specification Rev. 1.3 Page 22 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview **==> picture [312 x 465] intentionally omitted <==** **----- Start of picture text -----**<br> ||| |---|---| |Features| |Interference combinations where WLAN and Bluetooth share the same| |antenna:| |•|[WLAN Tx and Bluetooth Tx share the same antenna, the decision matrix ]| |allows either WLAN or Bluetooth Tx (both OOB and IB), based on relative| |packet priorities.| |•|[WLAN Tx and Bluetooth Rx (both OOB and IB) have sizable interference ]| |impacts on Bluetooth Rx, the decision matrix grants or denies WLAN Tx| |based on relative packet priorities.| |•|[WLAN Rx and Bluetooth Tx (both OOB and IB) have sizable interference ]| |impacts on WLAN Rx, the decision matrix grants or denies Bluetooth Tx| |based on relative packet priorities.| |•|[WLAN Rx and Bluetooth Rx (both OOB and IB) have no impact on each ]| |other, the decision matrix grants both.| |Interference combinations where WLAN and Bluetooth have their own| |antenna:| |•|[WLAN Tx and Bluetooth Tx in OOB situation have little interference impact ]| |on each other, the decision matrix grants both.| |•|[WLAN Tx and Bluetooth Tx in IB have sizable interference impact on each ]| |other, the decision matrix allows either WLAN or Bluetooth Tx, based on| |relative packet priorities.| |•|[WLAN Tx and Bluetooth Rx in OOB situation have little interference ]| |impact on each other, the decision matrix grants both provided there is| |enough antenna isolation between WLAN and Bluetooth antenna.| |•|[WLAN Tx and Bluetooth Rx in IB situation have sizable interference ]| |impact on Bluetooth Rx, the decision matrix grants or denies WLAN Tx| |based on relative packet priorities.| |•|[WLAN Rx and Bluetooth Tx in OOB situation have little interference ]| |impact on each other, the decision matrix grants both provided there is| |enough antenna isolation between WLAN and Bluetooth antenna.| |•|[WLAN Rx and Bluetooth Tx in IB situation have sizable interference ]| |impact on WLAN Rx, the decision matrix grants or denies Bluetooth Tx| |based on relative packet priorities.| |•|[WLAN Rx and Bluetooth Rx (both OOB and IB) have no impact on each ]| |other, the decision matrix grants both.| |For the devices running in a basic shared antenna configuration, the linear| |switching imposes restrictions on simultaneous transfer. Reasonable policies| |include:| **----- End of picture text -----**<br> - [WLAN and Bluetooth are never granted at the same time ] - [Decision matrix grants a device based on relative packet priorities and ] direction - [Priority order: High > Medium High > Medium > Low ] - [For equal priority contention, select one device to win, that optimizes the ] usage case For the devices running in an enhanced shared antenna configuration, the linear switching imposes restrictions on some simultaneous transfers. **Type** Product Specification Rev. 1.3 Page 23 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **2.7.6 Bluetooth Capability** |**Type**|**Features**| |---|---| |Request Schemes|The PTA signals are directly controlled by the hardware to meet timing| ||requirements of the Bluetooth radio. The software controls the type of traffic| ||in priority mode. Mechanism enforced for control include:| ||•Selection of certain types of communication always treated as high| ||priority| ||•Selection of individual frames marked with high priority| ||•Real-time signaling of the next slot marked with high priority| ||•Automatic hardware control, based on the grant/denial history of the| ||Bluetooth link| |Timing Control|The signal timing scheme PTA is fully programmable relative to the| ||Bluetooth packet timing.| |**WLAN Capability**|| |**Type**|**Features**| |Capability|The WLAN device technology uses an internal coexistence interface to| ||exchange request/grant with the BCA.| ||•Packet-based request signaling with direction and priority information| ||•1-bit or 2-bit priority signaling to support four priority levels| ||•Multiple WLAN Rx request trigger sources, including early prediction| ||•WLAN Tx request cancellation and abort if grant denied or revoked in| ||middle of request| ||•802.11n A-MPDU treated as single packet| |Packet Classification|•Programmable mask allows each frame type to be mapped to a priority| ||•Default setting puts response frames (ACK), beacons, and QoS frames| ||as high priority| ||•WLAN Tx and Rx have separate priority mask| |Queue Classification|•Programmable mask allows each transmit queue to be mapped to a| ||priority| ||•Queue-based mapping is optional for software-generated frames only| ## **2.7.7 WLAN Capability** Product Specification Rev. 1.3 Page 24 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **2.7.8 LTE (MWS) Capability** The device supports a Bluetooth SIG WCI-2 MWS coexistence signaling interface. The coexistence logical signaling is designed to enable a standard interface to allow an MWS device and a Coexistence Controller to exchange information and support cooperative coexistence. The WCI-2 signals carry time-critical information such as the start point of an MWS frame. The logical coexistence signaling architecture also includes transparent data messaging and vendor specific data messaging mechanism to enable passing information to and from the collocated MWS device and Coexistence Controller when long latency (tens of milliseconds) cannot be tolerated. For further information please refer to 2.7.4 WCI-2 Interface. ## **Coexistence Signals** The logical signals assist in time alignment, protecting MWS from interference and maximizing the usability of the Bluetooth radio. ## **Time-Critical Coexistence Signals** |**Signal Name**|**Direction**| |---|---| |FRAME_SYNC|MWS to Bluetooth| |BT_RX_PRI|Bluetooth to MWS| |BT_TX_ON|Bluetooth to MWS| |802_RX_PRI|Bluetooth to MWS| |802_TX_ON|Bluetooth to MWS| |MWS_PATTERN|MWS to Bluetooth| |MWS_RX|MWS to Bluetooth| |MWS_TX|MWS to Bluetooth| |MWS_INACTIVITY_DURATION|MWS to Bluetooth| |MWS_SCAN_FREQUENCY_OFFSET|MWS to Bluetooth| |MWS_TX_PRIL (MWS Tx PriorityLevel)|MWS to Bluetooth| |MWS_RX_PRIL (MWS RX PriorityLevel)|MWS to Bluetooth| ## **2.7.9 ZigBee (MWS) Coexistence Capability** ZigBee is based on the IEEE 802.15.4 standard and it is used by a suite of communication protocols to create Personal Area Networks (PANs) supporting home automation, lighting control, etc. ZigBee radios operate in the 2.4 GHz ISM band worldwide. Unlike Bluetooth, the ZigBee specification does not use AFH. When coexisting with WLAN/Bluetooth in the 2.4 GHz band, it is important to avoid co-channel (IB) operation of these radios. The device re-uses the MWS coexistence interface to support ZigBee coexistence. The coexistence logical signaling is used to allow a ZigBee device and a WLAN/Bluetooth combined device to exchange information and support cooperative coexistence. Product Specification Rev. 1.3 Page 25 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview INDUSTRY Panasonic 2 Overview ## **Coexistence Signals** The logical signals used for ZigBee and WLAN/Bluetooth coexistence are a subset of the LTE coexistence signaling. Considering the lower data rate of ZigBee packets, a lower baud rate may be chosen for the 2-wire UART physical interface. The BCA supports 3-way arbitration among ZigBee/WLAN/Bluetooth requests. ## **Coexistence Signals** |**Signal Name**|**Direction**| |---|---| |MWS_RX|MWS to Bluetooth| |MWS_TX|MWS to Bluetooth| |MWS_PATTERN|MWS to Bluetooth| |MWS_RX_PRI|MWS to Bluetooth| |MWS_TX_PRI|MWS to Bluetooth| |802_RX_PRI|Bluetooth to MWS| |802_TX_ON|Bluetooth to MWS| |BT_RX_PRI|Bluetooth to MWS| |BT_TX_ON|Bluetooth to MWS| ## **2.8 WLAN** |**Type**|**Features**| |---|---| |IEEE 802.11/<br>Standards|•802.11 data rates 1 and 2 Mbps (DSSS)<br>•802.11b data rates 5.5 and 11 Mbps (CCK)<br>•802.11a/g data rates 6, 9, 12, 18, 24, 36, 48, and 54 Mbps (OFDM)<br>•802.11b/g performance enhancements<br>•802.11n with maximum data rates up to 72 Mbps (20 MHz channel) and<br>150 Mbps (40 MHz channel)<br>•802.11e quality of service (QoS)<br>•802.11h transmit power control<br>•802.11h DFS radar pulse detection<br>•802.11i enhanced security (WEP, WPA, WPA2)<br>•802.11k radio resource measurement<br>•802.11mc precise indoor location and navigation<br>•802.11n block acknowledgment extension<br>•802.11r fast hand-off for AP roaming<br>•802.11u Hotspot 2.0 (STA mode only)<br>•802.11v TIM frame transmission/reception<br>•802.11w protected management frames<br>•Support clients (stations) implementing IEEE Power Save mode| - [Support clients (stations) implementing IEEE Power Save mode ] Product Specification Rev. 1.3 Page 26 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**Type**|**Features**| |---|---| |WLAN MAC|•Frame exchange at the MAC level to deliver data<br>•Received frame filtering and validation (CRC)<br>•Generation of MAC header and trailer information (MPDUs)<br>•Fragmentation of data frames (MSDUs)<br>•Access mechanism support for fair access to shared wireless medium<br>through:<br>−Distributed Coordination Function (DCF)<br>−Enhanced Distributed Channel Access (EDCA)<br>•A-MPDU aggregation/de-aggregation<br>•20 MHz and 40 MHz channel coexistence<br>•RIFS burst receive<br>•Management information base<br>•Radio resource measurement<br>•Quality of service<br>•Block acknowledgement<br>•Dynamic frequency selection<br>•TIM frame Tx and Rx<br>•Multiple BSS/Station<br>•Transmit rate adaption<br>•Transmit power control| |WLAN Baseband|•802.11n 1×1 SISO (WLAN SoC with SISO RF radio)<br>•Backward compatibility with legacy 802.11a/b/g technology<br>•WLAN/Bluetooth LNA sharing<br>•PHY data rates up to 150 Mbps<br>•20 MHz bandwidth/channel, 40 MHz bandwidth/channel, upper/lower<br>20 MHz bandwidth in 40 MHz channel, and 20 MHz duplicate legacy<br>bandwidth in 40 MHz channel mode operation<br>•Modulation and Coding Scheme MCS 0~7 and MCS 32 (duplicate<br>6 Mbps)<br>•Dynamic frequency selection (radar detection)<br>–<br>Enhanced radar detection for short and long pulse radar<br>–<br>Enhanced AGC scheme for DFS channel<br>–<br>Japan DFS requirement for W53 and W56<br>•802.11k Radio resource measurement<br>•802.11n optional features:<br>−20 MHz and 40 MHz coexistence<br>−Space-Time-Block-Coding (STBC) one spatial stream reception and<br>transmission<br>−Short Guard Interval for both 20 MHz and 40 MHz operation (Tx/Rx)<br>−RIFS on receive path<br>−Beamformer function and hardware acceleration<br>−Greenfield Tx/Rx<br>•802.11mc locationing<br>•Power save features| Product Specification Rev. 1.3 Page 27 of 89 - - > ## INDUSTRY Panasonic 2 Overview ## PAN9026 Wi-Fi/Bluetooth Module 2 Overview |**Type**|**Features**| |---|---| |WLAN Radio|•Integrated direct-conversion radio<br>•20 MHz and 40 MHz channel bandwidth<br>•Shared WLAN/Bluetooth receive input scheme for 2.4 GHz band<br>•Rx Path<br>−On-chip gain selectable LNA with optimized noise figure and power<br>consumpttion<br>−High dynamic range AGC function in receive mode<br>•Tx Path<br>−Internal PA with power control<br>−Optimized Tx gain distribution for linearity and noise performance<br>•Local Oscillator with fine channel step| |WLAN Encryption|•WEP 64-bit and 128-bit encryption with hardware TKIP processing<br>(WPA)<br>•AES-CCMP hardware implementation as part of 802.11i security<br>standard (WPA2)<br>•Enhanced AES engine performance<br>•Advanced encryption standard (AES)/Counter-Mode/CBC-MAC Protocol<br>(CCMP)<br>•AES-Cipher-Based Message Authentication Code (CMAC) as part of the<br>802.11w security standard<br>•WLAN Authentication and Privacy Infrastructure (WAPI)<br>•Simultaneous Authentication of Equals (SAE) with AES-CCMP-128<br>encryption (WPA3-Personal)| ## **Operation Modes** |**Parameter**|**Operation Mode**|**Specification**| |---|---|---| |Standard Conformance|IEEE 802.11/IEEE 802.11b|| ||IEEE 802.11a|| ||IEEE 802.11g|| ||IEEE 802.11n|| |Modulation|IEEE 802.11a|OFDM| ||IEEE 802.11b|DSSS/CCK| ||IEEE 802.11g|OFDM| ||IEEE 802.11n|OFDM at MCS0~7 and MCS32 (duplicate<br>6 Mbps)| |Physical Layer Data Rates|IEEE 802.11|1, 2 Mbps at DSSS| ||IEEE 802.11b|5.5, 11 Mbps at DSSS/CCK| Product Specification Rev. 1.3 Page 28 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**Parameter**|**Operation Mode**|**Operation Mode**|**Operation Mode**|**Operation Mode**|**Specification**| |---|---|---|---|---|---| |Supported Data Rates|IEEE 802.11g||||6, 9, 12, 18, 24, 36, 48, 54 Mbps| ||IEEE 802.11a||||6, 9, 12, 18, 24, 36, 48, 54 Mbps| ||IEEE<br>802.11n|MCS0~7|HT20|LGI|6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps| |||||SGI|7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65,<br>72.2 Mbps| ||||HT40|LGI|13.5, 27, 40.5, 54, 81, 108, 121.5,<br>135 Mbps| |||||SGI|15, 30, 45, 60, 90, 120, 135, 150 Mbps| |Supported Bandwidth|IEEE 802.11n||||20, 40 MHz (BW)| |Supported Channel Mode<br>Operation|IEEE 802.11n||||20 MHz BW/channel, 40 MHz BW/channel,<br>upper/lower 20 MHz BW at 40 MHz<br>channel, 20 MHz duplicate legacy BW<br>at 40 MHz channel| |Supported Guard Interval|IEEE 802.11n||||400 ns (SGI), 800 ns (LGI)| ## **Channels and Frequencies (without Regulatory Restrictions)** ## **2.4 GHz IEEE 802.11b/g/n** |**2.4 GHz IEEE 802.11b/g/ng/n/n**|**2.4 GHz IEEE 802.11b/g/ng/n/n**|**2.4 GHz IEEE 802.11b/g/ng/n/n**|**2.4 GHz IEEE 802.11b/g/ng/n/n**|**2.4 GHz IEEE 802.11b/g/ng/n/n**|**2.4 GHz IEEE 802.11b/g/ng/n/n**| |---|---|---|---|---|---| |**20 MHz Channels**|||**40 MHz Channels**||| |**Channel**|**Frequency**|**Unit**|**Channel**|**Frequency**|**Unit**| |1|2 412|MHz|1-5|2 422|MHz| |2|2 417|MHz|2-6|2 427|MHz| |3|2 422|MHz|3-7|2 432|MHz| |4|2 427|MHz|4-8|2 437|MHz| |5|2 432|MHz|5-9|2 442|MHz| |6|2 437|MHz|6-10|2 447|MHz| |7|2 442|MHz|7-11|2 452|MHz| |8|2 447|MHz|||| |9|2 452|MHz|||| |10|2 457|MHz|||| |11|2 462|MHz|||| |12|2 467|MHz|||| |13|2 472|MHz|||| ## **5 GHz IEEE 802.11a/n** |**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**| |---|---|---|---|---|---| |**20 MHz Channels**|||**40 MHz Channels**||| |**Channel**|**Frequency**|**Unit**|**Channel**|**Frequency**|**Unit**| |36|5 180|MHz|36-40|5 190|MHz| |40|5 200|MHz|44-48|5 230|MHz| |44|5 220|MHz|52-56|5 270|MHz| |48|5 240|MHz|60-64|5 310|MHz| |52|5 260|MHz|||| Product Specification Rev. 1.3 Page 29 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**| |---|---|---|---|---|---|---|---| |**20 MHz Channels**|||||**40 MHz Channels**||| |**Channel**|**Frequency**||**Unit**||**Channel**|**Frequency**|**Unit**| |56|5 280||MHz||||| |60|5 300||MHz||||| |64|5 320||MHz||||| ||||||||| |100||5 500||MHz|100-104|5 510|MHz| |104||5 520||MHz|108-112|5 550|MHz| |108||5 540||MHz|116-120|5 590|MHz| |112||5 560||MHz|124-128|5 630|MHz| |116||5 580||MHz|132-136|5 670|MHz| |120||5 600||MHz|||| |124||5 620||MHz|||| |128||5 640||MHz|||| |132||5 660||MHz|||| |136||5 680||MHz|||| |140||5 700||MHz|||| |149||5 745||MHz|149-153|5 755|MHz| |153||5 765||MHz|157-161|5 795|MHz| |157||5 785||MHz|||| |161||5 805||MHz|||| |165||5 825||MHz|||| ## **5 GHz IEEE 802.11a/n (India and additional UNII Channels)** |**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**|**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**|**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**|**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**|**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**|**5 GHz IEEE 802.11a/n (India and additional UNII Channels)**| |---|---|---|---|---|---| |**20 MHz Channels**|||**40 MHz Channels**||| |**Channel**|**Frequency**|**Unit**|**Channel**|**Frequency**|**Unit**| |144|5 720|MHz|68-72|5 350|MHz| |1696|5 845|MHz|76-80|5 390|MHz| |173|173<br>5 865|MHz|84-88|5 430|MHz| |177|5 885|MHz|92-96|5 470|MHz| |181|5 905|MHz|140-144|5 710|MHz| ||||165-169|5 835|MHz| ||||169-1737|5 855|MHz| ||||173-177|5 875|MHz| > 6 India channels that can be used in other countries as well 7 India use only Product Specification Rev. 1.3 Page 30 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 2 Overview ## **Channel Tables based on Regulatory Domain/Country** |**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**|**2.4 GHz IEEE 802.11b/g/n**| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |**802.11 Operation Mode**|||||**11b**|**11g**|||**11n**<br>**20M**|||**11n**<br>**40M**||||0 = disable<br>1 = enable||Device Mode<br>Y = Yes/N = No|| |**Data Rates**|||||1M - 11M|6M - 18M|24M - 36M|48M - 54M|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|||||| |**Model Variant8**|**Channel 20M**|**Channel 40M**|**Frequenz**|**Unit**|**Tx Power**<br>**(maximum)**||||||||||**Unit**|**DFS**|**Passive Scan**|**Master**|**Client**| |US, EU,<br>CA, MR|1||2 412 MHz|2 412 MHz|15|15|15|14|14|14|13|-|-|-|dBm|0|0|Y|Y| ||2||2 417 MHz|2 417 MHz|16|16|16|15|15|15|14|-|-|-|dBm|0|0|Y|Y| ||3|1-5|2 422 MHz|2 422 MHz|16|16|16|15|15|15|14|13|13|12|dBm|0|0|Y|Y| ||4|2-6|2 427 MHz|2 427 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||5|3-7|2 432 MHz|2 432 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||6|4-8|2 437 MHz|2 437 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||7|5-9|2 442 MHz|2 442 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||8|6-10|2 447 MHz|2 447 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||9|7-11|2 452 MHz|2 452 MHz|16|16|16|15|15|15|14|13|13|12|dBm|0|0|Y|Y| ||10|-|2 457 MHz|2 457 MHz|16|16|16|15|15|15|14|-|-|-|dBm|0|0|Y|Y| |US, CA,<br>MR|11|-|2 462 MHz|2 462 MHz|15|15|15|14|14|14|13|-|-|-|dBm|0|0|Y|Y| ||12|-|2 467 MHz|2 467 MHz|-|-|-|-|-|-|-|-|-|-|dBm|0|0|N|N| ||13|-|2 472 MHz|2 472 MHz|-|-|-|-|-|-|-|-|-|-|dBm|0|0|N|N| |EU|10|8-12|2 457 MHz|2 457 MHz|16|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||11|9-13|2 462 MHz|2 462 MHz|16|16|16|15|15|15|14|13|13|12|dBm|0|0|Y|Y| ||12|-|2 467 MHz|2 467 MHz|16|16|16|15|15|15|14|-|-|-|dBm|0|0|Y|Y| ||13|-|2 472 MHz|2 472 MHz|15|15|15|14|14|14|13|-|-|-|dBm|0|0|Y|Y| > 8 The country related module variants are using a channel table with Tx Power, DFS, and Passive Scan settings, which is pre-stored and locked in the OTP memory of the module and cannot be changed by host driver API. Please find the model variants restricted to a particular regulatory domain at the variant table of Ordering Information. Product Specification Rev. 1.3 Page 31 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |**802.11 Operation Mode**|||||**11a**|||**11n**<br>**20M**|||**11n**<br>**40M**||||0 = disable<br>1 = enable||Device Mode<br>Y = Yes/N = No|| |**Data Rates**|||||6M - 18M|24M - 36M|48M - 54M|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|||||| |**Model Variant**|**Channel 20M**|**Channel 40M**|**Frequenz**|**Unit**|**Tx Power**<br>**(maximum)**|||||||||**Unit**|**DFS**|**Passive Scan**|**Master**|**Client**| |US, EU,<br>CA, MR|36|38|5 180|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||40||5 200|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||44|46|5 220|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||48||5 240|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| |US, EU,<br>CA|52|54|5 260MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||56||5 280MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||60|62|5 300MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||64||5 320MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| |MR|52|54|5 260|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||56||5 280|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||60|62|5 300|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||64||5 320|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| |US, EU,<br>CA|100|102|5 500MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||104||5 520MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||108|110|5 540MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||112||5 560MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| |MR|100|102|5 500|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||104||5 520|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||108|110|5 540|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||112||5 560|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| |US, EU|116|118|5 580MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||120||5 600MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||124|126|5 620MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||128||5 640MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| |CA|116|118|5 580|MHz|16|16|15|15|15|14|-|-|-|dBm|1|1|Y|Y| ||120||5 600|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||124|126|5 620|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||128||5 640|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| Product Specification Rev. 1.3 Page 32 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview ## INDUSTRY Panasonic 2 Overview |**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**|**5 GHz IEEE 802.11a/n**| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |**802.11 Operation Mode**|||||**11a**|||**11n**<br>**20M**|||**11n**<br>**40M**||||0 = disable<br>1 = enable||Device Mode<br>Y = Yes/N = No|| |**Data Rates**|||||6M - 18M|24M - 36M|48M - 54M|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|MCS0 – MCS2|MCS3 – MCS4|MCS5 – MCS7|||||| |**Model Variant**|**Channel 20M**|**Channel 40M**|**Frequenz**|**Unit**|**Tx Power**<br>**(maximum)**|||||||||**Unit**|**DFS**|**Passive Scan**|**Master**|**Client**| |MR|116|118|5 580|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||120||5 600|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||124|126|5 620|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||128||5 640|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| |US, CA,<br>EU|132|134|5 660MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||136||5 680MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|1|1|Y|Y| ||140|-|5 700MHz|MHz|16|16|15|15|15|14|-|-|-|dBm|1|1|Y|Y| |MR|132|134|5 660|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||136||5 680|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| ||140|-|5 700|MHz|-|-|-|-|-|-|-|-|-|dBm|-|-|N|N| |US, CA|149|151|5 745MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||153||5 765MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||157|159|5 785MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||161||5 805MHz|MHz|16|16|15|15|15|14|14|14|13|dBm|0|0|Y|Y| ||165|-|5 825MHz|MHz|16|16|15|15|15|14|-|-|-|dBm|0|0|Y|Y| |EU, MR|149|151|5 745|MHz|10|10|9|10|10|9|9|9|8|dBm|0|0|Y|Y| ||153||5 765|MHz|10|10|9|10|10|9|9|9|8|dBm|0|0|Y|Y| ||157|159|5 785|MHz|10|10|9|10|10|9|9|9|8|dBm|0|0|Y|Y| ||161||5 805|MHz|10|10|9|10|10|9|9|9|8|dBm|0|0|Y|Y| ||165|-|5 825|MHz|10|10|9|10|10|9|-|-|-|dBm|0|0|Y|Y| Product Specification Rev. 1.3 Page 33 of 89 INDUSTRY Panasonic 2 Overview - - > PAN9026 Wi-Fi/Bluetooth Module ## **2.9 Bluetooth** |**Type**|**Features**| |---|---| |General|•Supports Bluetooth 5<br>•Shared Tx/Rx path for Bluetooth<br>•Digital Audio Interface including PCM interface for voice application<br>•Bluetooth and WLAN coexistence<br>•WLAN/Bluetooth Coexistence (BCA) protocol support| |Bluetooth Classic<br>(BR/EDR)|•Bluetooth Classic with Bluetooth Class 1 support<br>•Baseband and radio Basic Rate (BR) and Enhanced Data Rate (EDR)<br>packet types with 1 Mbps (GFSK), 2 Mbps (π/4-DQPSK) and 3 Mbps<br>(8DPSK)<br>•Fully functional Bluetooth baseband with:<br>–<br>Adaptive Frequency Hopping (AFH)<br>–<br>Forward error correction<br>–<br>Header error control<br>–<br>Access code correlation<br>–<br>CRC<br>–<br>Encryption bit stream generation<br>–<br>Whitening<br>•Adaptive Frequency Hopping (AFH) including Packet Loss Rate (PLR)<br>•Interlaced scan for faster connection setup<br>•Simultaneous active ACL connection support<br>•Automatic ACL packet type selection<br>•Full master slave piconet support<br>•Scatternet support<br>•Standard UART and SDIO HCI transport layer<br>•SCO/eSCO links with hardware accelerated audio signal pocessing and<br>hardware supported PPEC algorithm for speech quality improvement<br>•All standard SCO/eSCO voice coding<br>•All standard pairing, authentication, link key, and encryption operations<br>•Standard Bluetooth power saving mechanism (i.e. hold, sniff modes, and<br>sniff-sub rating)<br>•Enhanced Power Control (EPC)<br>•Channel Quality Driven (CQD) data rate<br>•Wideband Speech (WBS) support (1 WBS link)<br>•Encryption (AES) support<br>•LTE/MWS coexistence| Product Specification Rev. 1.3 Page 34 of 89 INDUSTRY Panasonic 2 Overview ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 2 Overview |**Type**|**Features**| |---|---| |Bluetooth LE|•Broadcaster, Observer, Central, and Peripheral roles<br>•Supports link layer topology to be master and slave (connects up to<br>16 links)<br>•Shared RF with BR/EDR<br>•Encryption AES support<br>•Hardware support for intelligent Adaptive Frequency Hopping (AFH)<br>•LE Privacy 1.2<br>•LE Secure Connection<br>•LE Data Length Extension<br>•LE Advertising Length Extension<br>•Direction Finding, Connection-oriented Angle of Arrival (AoA)| Product Specification Rev. 1.3 Page 35 of 89 PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description ## ## **3 Detailed Description** ## **3.1 Dimensions** All dimensions are in millimeters. ## Top View **==> picture [193 x 129] intentionally omitted <==** **----- Start of picture text -----**<br> 17.<br>50<br>.00<br>10<br>2.55<br>**----- End of picture text -----**<br> |**No.**|**Item**|**Dimension**|**Tolerance**|**Remark**| |---|---|---|---|---| |1 Width|1 Width|10.00|±0.35|±0.35| |2 Len|2 Length|17.50|±0.35|±0.35| |3 Hei|3 Height|2.55|±0.20 With case|±0.20 With case| Product Specification Rev. 1.3 Page 36 of 89 PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description ## **3.2 Footprint** ## Top View **==> picture [379 x 291] intentionally omitted <==** **----- Start of picture text -----**<br> 8.80 mm<br>—_ 6.00 mm<br>2.20 mm 2.20 mm<br>G1 G2 G3 G4 G5 G6 G7 G8 G9<br> 0.80 mm<br>F1 F2 F3 F4 F5 F6 F7 F8 F9<br>iF ceee<br>E1 E2 E3 E4 E9<br>Ground plane<br>D1 D2 D3 D4 EP1 EP2 D9 keep out area<br>C1 C2 C3 C4 C9<br>HeeO18 © @ Ua OF e<br>B1 B2 B3 B4 B5 | B6 B7 B8 B9<br>@0CCCCCC® 0.80 mm ;<br>A1 A2 A3 A4 A5 A6 A7 A8 A9<br>a @0 000008<br> 0.80 mm 1.40 mm 4.80 mm<br> 2.20 mm<br> 3.60 mm<br> 5.00 mm<br> 6.40 mm<br> 7.80 mm<br> 9.20 mm<br>10.60 mm<br>12.00 mm<br>12.00 mm<br>17.50 mm<br>Chip Antenna<br> 9.20 mm 7.80 mm 6.80 mm 6.40 mm 5.00 mm 3.60 mm 3.20 mm 2.20 mm 0.80 mm 1.00 mm<br>10.00 mm 0.80 mm 8.00 mm<br>1.00 mm<br>**----- End of picture text -----**<br> Product Specification Rev. 1.3 Page 37 of 89 3 Detailed Description - - > ## PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY 3 Detailed Description Panasonic ## **3.3 Packaging** The module is a mass production status product and will be delivered in the package described below. ## **3.3.1 Tape Dimensions** **==> picture [400 x 228] intentionally omitted <==** **----- Start of picture text -----**<br> T Do P2 Po E1<br>0.30± 0.03 +0.1 2.0± 0.15(I) 4.0± 0.15(II) 1.75± 0.1<br>1.5 0.0 Y<br>I —<br>D1<br>| 2.0MIN<br>X X<br>EYloooc A Y oo coqoopoooce |<br>Ko P1 Ao<br>SECTION Y-Y R0.75<br>og<br>DETAIL A SECTION X-X<br>Ao 10.55 +/- 0.15<br>Bo 18.05 +/- 0.15 (I) Measured from centreline of sprocket hole<br>Ko 3.00 +/- 0.15 to centreline of pocket.<br>F 14.20 +/- 0.15 (II) Cumulative tolerance of 10 sprocketholes is ± 0.20 .<br>P 1 20.00 +/- 0.15 (III) Measured from centreline of sprocket<br>S O 28.40 +/- 0.15 (IV) hole to centreline of pocket.Other material available.<br>W 32.00 +/- 0.3 ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED.<br>F(III)<br>Bo So W<br>± 0.05<br>0.20<br>**----- End of picture text -----**<br> ## **3.3.2 Packing in Tape** Direction of unreeling (for customer) **==> picture [296 x 46] intentionally omitted <==** **----- Start of picture text -----**<br> trailer (empty) component leader (empty) Top cover tape more<br>1 x circumference / packed area minimum 10 pitch than 1 x<br>circumference plus<br>hub standard 100mm to avoid<br>(min 160mm) 1500pcs fixing of tape end on<br>sealed modules.<br>**----- End of picture text -----**<br> Empty spaces in the component packed area shall be less than two per reel and those spaces shall not be consecutive. The top cover tape shall not be found on reel holes and it shall not stick out from the reel. Product Specification Rev. 1.3 Page 38 of 89 PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description ## **3.3.3 Component Direction** **==> picture [248 x 56] intentionally omitted <==** **----- Start of picture text -----**<br> Pin 1 Marking<br>(Top Side)<br>Direction of<br>unreeling<br>(for customer)<br>**----- End of picture text -----**<br> ## **3.3.4 Reel Dimension** Product Specification Rev. 1.3 Page 39 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY 3 Detailed Description Panasonic ## **3.3.5 Package Label** ## **Example:** **==> picture [368 x 352] intentionally omitted <==** **----- Start of picture text -----**<br> (1T) Lot code<br>(1P) Customer order number, if applicable<br>(2P) Order number<br>(9D) Date code<br>(Q) Quantity<br>(HW/SW) Hardware/software version<br>Total Package<br>moisture-sensitive print<br>(already exist on barrier bag) barcode<br>label<br>, o o<br>barrier bag<br>sealed<br>desiccant 1) 2)<br>. S S moisture indicator<br>Ca” “S g<br>1) quantity of desiccant according<br> to calculation<br>barcode 2) optional: desiccant placed into<br>label the corner of the barrier bag<br>~<br>inner carton box<br>SS<br>size 340 x 340 x 41 mm³<br>**----- End of picture text -----**<br> ## **3.3.6 Total Package** Product Specification Rev. 1.3 Page 40 of 89 > PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description ## INDUSTRY 3 Detailed Description Panasonic ## **3.4 Case Marking** ## **Example:** |1|Brand name| |---|---| |2|Hardware/Software version| |3|Engineering Sample (optional)| |4|Model Name/ENW number| |5|Lot code| |6|Serial number| |7|WLAN MAC address| |8|BD address| |9|Certification grant ID| |10|Marking for Pin 1| |11|2D barcode, for internal usage only| |12|Bluetooth SIG logo| Product Specification Rev. 1.3 Page 41 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## **4 Specification** **==> picture [30 x 30] intentionally omitted <==** **----- Start of picture text -----**<br> ©<br>**----- End of picture text -----**<br> All specifications are over temperature and process, unless indicated otherwise. ## **4.1 Default Test Conditions** © Temperature: 25 °C ±10 °C Humidity: 40 % to 85 % RH Supply Voltage: VDD2V2 = 2.2 V VDD1V8 = 1.8 V VIORF = 3.3 V VIOSD = 3.3 V VIO = 1.8 V ## **4.2 Absolute Maximum Ratings** The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |TSTOR|Storage<br>Temperature||-40||85|°C| |VESD|ESD<br>Robustness|All pads, according to human<br>body model (HBM), JEDEC<br>STD 22, method A114|||1 000|V| |||According to charged device<br>model (CDM), JEDEC STD 22,<br>method C101|||500|V| |PRF|RF Input<br>Level||||20|dBm| |VDD1V8|Maximum<br>Voltage|Maximum power supply voltage<br>from any pin with respect to<br>VSS(GND)||1.8|1.98|V| |VDD2V2||||2.2|2.3|V| |VIOSD||||1.8|2.2|V| |||||3.3|4|V| |VIO||||1.8|2.2|V| |||||3.3|4|V| |VIORF||||3.3|4|V| |VRF_SW1/2||||3.3|4|V| Product Specification Rev. 1.3 Page 42 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification INDUSTRY Panasonic 4 Specification ## **4.3 Recommended Operating Conditions** The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |TA|Ambient<br>Operating<br>Temperature<br>Range|Extended grade|-30||85|°C| |VDD1V8|1V8 Supply<br>Voltage9|VDD voltage for Baseband and<br>CPU on pins A4, A5|1.71|1.8|1.89|V| |VDD2V2|2V2 Supply<br>Voltage9|VDD voltage for VGA on pins<br>A6, B5, B6|2.09|2.2|2.26|V| |VIOSD|Digital I/O<br>VIOSDSupply<br>Voltage10|Pin G3 with 1.8 V operation<br> SDIO Pins Function|1.62|1.8|1.98|V| |||Pin G3 with 3.3 V operation<br> SDIO Pins Function|2.97|3.3|3.47|V| |VIO|Digital I/O VIO<br>Supply<br>Voltage|Pin G4 with 1.8 V operation|1.62|1.8|1.98|V| |||Pin G4 with 3.3 V operation Pin<br>B4 connect to GND11|2.97|3.3|3.47|V| |VIORF|Digital I/O<br>VIORFSupply<br>Voltage9|Pin G7 with 3.3 V operation|2.97|3.3|3.47|V| |VRF_SW1/2|VRF_SW1/2<br>Switch<br>Voltage9|Pin A7, B7 with 3.3 V logical<br>level switch operation<br> RF-Switch Pins Function|2.97|3.3|3.6|V| > 9 The power consumption should not exceed 15 Watt. > 10 1.8 V or 3.3 V supply voltage possible > 11 Connect the 32KHZ_EN pin via a 100 resistor to ground to disable the internal 32.768 kHz crystal oscillator. The low power modes will then use the SoC reference clock, which has lower accuracy. Product Specification Rev. 1.3 Page 43 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 4 Specification ## **Digital Pin Characteristics** ## **VIO with 1.8 V Operations[12]** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |VIH|High Level<br>Input Voltage|1.8 V operation (VIO= 1.8 V)|0.7 VIO||VIO+0.4|V| |VIL|Low Level Input<br>Voltage|1.8 V operation (VIO= 1.8 V)|-0.4||0.3 VIO|V| |VHYS|Input Hysteresis|steresis|100|||mV| |VOH|High Level<br>Ouput Voltage|1.8 V operation (VIO= 1.8 V)|VIO-0.4|||V| |VHO|Low Level<br>Output Voltage|1.8 V operation (VIO= 1.8 V)|||0.4|V| ## **VIO with 3.3 V Operations[12]** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |VIH|High Level<br>Input Voltage|3.3 V operation (VIO= 3.3 V)|0.7 VIO||VIO+0.4|V| |VIL|Low Level Input<br>Voltage|3.3 V operation (VIO= 3.3 V)|-0.4||0.3 VIO|V| |VHYS|Input Hysteresis|steresis|100|||mV| |VOH|High Level<br>Ouput Voltage|3.3 V operation (VIO= 3.3 V)|VIO-0.4|||V| |VHO|Low Level<br>Output Voltage|3.3 V operation (VIO= 3.3 V)|||0.4|V| ## **VIOSD 1.8 V Operation for SDIO I/F[12]** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |VIH|High Level<br>Input Voltage|1.8 V operation (VIOSD= 1.8 V)|0.7 VIOSD||VIOSD<br>+0.4|V| |VIL|Low Level Input<br>Voltage|1.8 V operation (VIOSD= 1.8 V)|-0.4||0.3 VIOSD|V| |VHYS|Input Hysteresis|Input Hysteresis|100|||mV| |VOH|High Level<br>Ouput Voltage|1.8 V operation (VIOSD= 1.8 V)|VIOSD<br>-0.4|||V| |VHO|Low Level<br>Output Voltage|1.8 V operation (VIOSD= 1.8 V)|||0.4|V| > 12 The capacitive load should not be larger than 50 pF for all I/Os when using the default driver strength settings. Large capacitance loads generally increase the overall current consumption. Product Specification Rev. 1.3 Page 44 of 89 > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## Panasonic 4 Specification ## **VIOSD 3.3 V Operation for SDIO I/F[12 ]** **==> picture [33 x 31] intentionally omitted <==** **----- Start of picture text -----**<br> @<br>**----- End of picture text -----**<br> For SDIO 3.0 standard modes SDR12, SDR25, SDR50, and DDR50, a supply voltage of VIOSD = 1.8 V should be used. |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |VIH|High Level<br>Input Voltage|3.3 V operation (VIOSD= 3.3 V)|0.7 VIO_SD||VIO_SD<br>+0.4|V| |VIL|Low Level Input<br>Voltage|3.3 V operation (VIOSD= 3.3 V)|-0.4|0.3 V|0.3 VIO_SD|V| |VHYS|Input Hysteresis|Input Hysteresis|100|||mV| |VOH|High Level<br>Ouput Voltage|3.3 V operation (VIOSD= 3.3 V)|VIOSD<br>-0.4|||V| |VHO|Low Level<br>Output Voltage|3.3 V operation (VIOSD= 3.3 V)|||0.4|V| ## **4.4 Current Consumption** @ The current consumption depends on the user scenario and on the setup and timing in the power modes. Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. ## **General Current Consumption** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |IVDD1V8 @ PDn|Power Down|Grounding of PDn pin||150||µA| |IVDD2V2 @ PDn||||5|5|µA| |IVDD1V8 @ DeepSleep|WLAN/Bluetoot<br>h Deep Sleep|Low-power state used in sleep state|Low-power state used in sleep state|600||µA| |IVDD2V2 @ DeepSleep||||5||µA| |IVDD1V8 @ Firmware InitFirmware|Firmware<br>Initialization|Device Initialization||400|400|mA| |IVDD2V2 @ Firmware Init||||950|950|mA| Product Specification Rev. 1.3 Page 45 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification INDUSTRY Panasonic 4 Specification ## **WLAN Current Consumption** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |IVDD1V8 @ TX|Active<br>Transmit13|PTX= +15 dBm for 5 GHz band<br>802.11a at 54 Mbps||230|230|mA| |||PTX= +14 dBm for 5 GHz band<br>802.11n 20M at MCS7||240|240|mA| |||PTX= +13 dBm for 5 GHz band<br>802.11n 40M at MCS7||250|250|mA| |||PTX= +16 dBm for 2.4 GHz band<br>802.11b at 11 Mbps||175|175|mA| |||PTX= +15 dBm for 2.4 GHz band<br>802.11gat 54 Mbps||180|180|mA| |||PTX= +14 dBm for 2.4 GHz band<br>802.11n 20M at MCS7||185|185|mA| |IVDD2V2 @ TX|Active<br>Transmit13|PTX= +15 dBm for 5 GHz band<br>802.11a at 54 Mbps||180|180|mA| |||PTX= +14 dBm for 5 GHz band<br>802.11n 20M at MCS7||170|170|mA| |||PTX= +13 dBm for 5 GHz band<br>802.11n 40M at MCS7||160|160|mA| |||PTX= +16 dBm for 2.4 GHz band<br>802.11b at 11 Mbps||240|240|mA| |||PTX= +15 dBm for 2.4 GHz band<br>802.11gat 54 Mbps||190|190|mA| |||PTX= +14 dBm for 2.4 GHz band<br>802.11n 20M at MCS7||170|170|mA| |IVDD1V8 @ RX|Active<br>Receive14|5 GHz band 802.11a at 54 Mbps||85|85|mA| |||5 GHz band 802.11n 20M at MCS7||95|95|mA| |||5 GHz band 802.11n 40M at MCS7||110|110|mA| |||2.4 GHz band 802.11b at 11 Mbps||65|65|mA| |||2.4 GHz band 802.11gat 54 Mbps||70|70|mA| |||2.4 GHz band 802.11n 20M<br>at MCS7||75|75|mA| |IVDD2V2 @ RX|Active<br>Receive14|5 GHz band 802.11a/n||20|20|µA| |||2.4 GHz band 802.11b/g/n||20|20|µA| |IVDD1V8 @ IEEE-PS|IEEE Power<br>Save15|DTIM = 1 with beacon interval<br>100 ms (Average16)||2|2|mA| |IVDD2V2 @ IEEE-PS||||20|20|µA| - 13 Peak values for specified output power level and data rate with UDP traffic between the AP and device (STA). - 14 Peak values for specified data rate with UDP traffic between the device (Client) and AP (Server). The WLAN/Bluetooth combo firmware is downloaded and Bluetooth is in Deep Sleep. - 15 In IEEE Power Save the device automatically wakes up on beacons. If it is a DTIM value of 1 along with a beacon interval of 100 ms, the device wakes up every 100 ms. > 16 The average current is averaged over one cycle which includes sleep time and wake up time. Product Specification Rev. 1.3 Page 46 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification ## **Bluetooth Current Consumption** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |IVDD1V8 @ TX|BT SCO HV3|Peak, PTX= +4 dBm||55|55|mA| ||BT ACL DH1|Average, PTX= 0 dBm||25|25|mA| ||BT ACL 3-DH5|Average, PTX= 0 dBm||35|35|mA| ||LE|PTX= 0 dBm||45|45|mA| |IVDD2V2 @ TX|BT SCO HV3|PTX= +4 dBm||15|15|µA| ||BT ACL DH1|PTX= 0 dBm||15|15|µA| ||BT ACL 3-DH5|PTX= 0 dBm||15|15|µA| ||LE|PTX= 0 dBm||15|15|µA| |IVDD1V8 @ RX|LE|Peak||30|30|mA| |IVDD2V2 @ RX|LE|||5|5|µA| |IVDD1V8 @ Page Scan|BT Page Scan|Peak||2.4|2.4|mA| |IVDD2V2 @ Page Scan||||5|5|µA| |IVDD1V8 @ PI Scan|BT Page and<br>Inquiry Scan|Peak||3.8|3.8|mA| |IVDD2V2 @ PI Scan||||5|5|µA| |IVDD1V8 @ LE Advertise|LE Advertise in<br>1.28 s Interval|Peak||1.5|1.5|mA| |IVDD2V2 @ LE Advertise||||5|5|µA| |IVDD1V8 @ LE Scan|LE Scan with<br>Interval 1.28 s|Peak||1.5|1.5|mA| |IVDD2V2 @ LE Scan||||5|5|µA| ## **RF Control Current Consumption** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |IVIORF|RF FE Control Controlled b|RF FE Control Controlled byFirmware||5||µA| |IRF_SW1/2|RF Switch Pin Controlled by V|RF Switch Pin Controlled by VRF_SW1/2(high<br>level)||5||µA| Product Specification Rev. 1.3 Page 47 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## **4.4.1 Internal Operating Frequencies** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |fSYSCLK1|CPU1/System<br>/Encryption<br>Clock Speed|Refers to clock speed of SoC’s<br>CPU1|||160|MHz| |fSYSCLK2|CPU2|Refers to clock speed of SoC’s<br>CPU2|||64|MHz| |fREFCLK1|Crystal<br>Fundamental<br>Frequency|Frequency tolerance < ±10 ppm<br>over operating temperature and<br>process||26||MHz| |fSLEEPCLK|Sleep Clock<br>Frequency|Frequency tolerance < ±20 ppm<br>over operating temperature,<br>aging and process, CMOS input<br>clock signal type||32.768||kHz| ## **4.4.2 Power-up Sequence** |**Symbol**|**Parameter**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---| |VDD2V2|Voltage level of VIOSD|100|||%| |VDD1V8|Voltage level of VDD2V2|90|||%| |PDn|Voltage level of VDD2V2|90|||%| Product Specification Rev. 1.3 Page 48 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module **==> picture [4 x 1] intentionally omitted <==** **----- Start of picture text -----**<br> <br>**----- End of picture text -----**<br> ## **4.4.3 Host Interface** ## **4.4.3.1 SDIO Interface** The SDIO Interface pins are powered from the VIOSD voltage supply with either 3.3 V or 1.8 V. The SDIO electrical specifications are identical for the 1-bit and 4-bit SDIO modes. For the DC specification please refer to Digital Pin Characteristics. ## **SDIO Timing Data: Default and High-Speed Modes (VIOSD 3.3 V)[17,18]** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |fPP|Clock Frequency|Normal|0||25|MHz| |||High-speed|0||50|MHz| |TWL|Clock Low Time|Normal|10|||ns| |||High-speed|7|||ns| |TWH|Clock High Time|Normal|10|||ns| |||High-speed|7|||ns| |TISU|Input Setup Time|Normal|5|||ns| |||High-speed|6|||ns| |TIH|Input Hold Time|Normal|5|||ns| |||High-speed|2|||ns| |TODLY|Output DelayTime|Normal|||14|ns| ||CL40 Pf (1 Card)|High-speed|||14|ns| |TOH|Output Hold Time|High-speed|2.5|||ns| ## SDIO Protocol Timing Diagram: Default Speed Mode (VIOSD 3.3 V) 17 For SDIO 2.0 running at 50 MHz clock frequency, a supply voltage VIOSD of 1.8 V is recommended. 18 For SDIO 2.0 running at 25 MHz clock frequency, either 1.8 V or 3.3 V can be used. Product Specification Rev. 1.3 Page 49 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## SDIO Protocol Timing Diagram: High-Speed Mode (VIOSD 3.3 V) ## **SDIO Timing Data: SDR12, SDR25, SDR50 Modes (VIOSD 1.8 V)** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |fPP|Clock Frequency|SDR12/SDR25/<br>SDR50|25||100|MHz| |TIS|Input Setup Time|SDR12/SDR25/<br>SDR50|3|||ns| |TIH|Input Hold Time|SDR12/SDR25/<br>SDR50|0.8|||ns| |TCLK|Clock Time|SDR12/SDR25/<br>SDR50|10||40|ns| |TCR, TCF|Rise Time, Fall Time<br>TCR, TCF< 2 ns (max.) at<br>100 MHz<br>CCARD= 10pF|SDR12/SDR25/<br>SDR50|||0.2 *<br>TCLK|ns| |TODLY|Output Delay Time<br>CL30 pF|SDR12/SDR25/<br>SDR50|||7.5|ns| |TOH|Output Hold Time<br>CL = 15pF|SDR12/SDR25/<br>SDR50|1.5|||ns| ## SDIO Protocol Timing Diagram: SDR12, SDR25, SDR50 Modes ## (VIOSD 1.8 V) Product Specification Rev. 1.3 Page 50 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification INDUSTRY Panasonic 4 Specification ## **SDIO Timing Data: DDR50 Mode (VIOSD 1.8 V)** |**Symbol**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Clock||||||| |TCLK|Clock Time<br>50 MHz (max.) between<br>Rising Edges|DDR50|20|||ns| |TCR, TCF|Rise Time, Fall Time<br>TCR, TCF< 4 ns (max.) at<br>50 MHz,<br>CCARD= 10pF|DDR50|||0.2 *<br>TCLK|ns| |Clock Duty||DDR50|45||55|%| |CMD Input (referenced to clock risingedge)||||||| |TIS|Input Setup Time<br>CCARD 10 pF (1 card)|DDR50|6|||ns| |TIH|Input Hold Time<br>CCARD 10 pF (1 card)|DDR50|0.8|||ns| |CMD Output (referenced to clock risingedge)||||||| |TODLY|Output Delay Time During<br>Data Transfer Mode<br>CL 30 pF (1 card)|DDR50|||13.7|ns| |TOHLD|Output Hold Time<br>CL≥ 15pF (1 card)|DDR50|1.5|||ns| |DAT[3:0] Input (referenced to clock risingand fallingedge)||||||| |TIS2x|Input Setup Time<br>CCARD 10 pF (1 card)|DDR50|3|||ns| |TIH2x|Input Hold Time<br>CCARD 10 pF (1 card)|DDR50|0.8|||ns| |DAT[3:0] Output (referenced to clock risingand fallingedge)||||||| |TODLY2x(max.) Output Delay Time During|(max.) Output Delay Time During<br>Data Transfer Mode<br>CL 25 pF (1 card)|DDR50|||7|ns| |TODLY2x(min.)|Output Hold Time<br>CL≥ 15pF (1 card)|DDR50|1.5|||ns| Product Specification Rev. 1.3 Page 51 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## SDIO CMD Timing Diagram: DDR50 Mode (VIOSD 1.8 V, 50 MHz) ## SDIO DAT[3:0] Timing Diagram: DDR50 Mode[19] (VIOSD 1.8 V, ## 50 MHz) ## **4.4.3.2 High-Speed UART Interface** The High-Speed UART Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to Digital Pin Characteristics. > 19 In DDR50 mode, DAT[3:0] lines are sampled on both edges of the clock (not applicable for CMD line). Product Specification Rev. 1.3 Page 52 of 89 INDUSTRY Panasonic 4 Specification PAN9026 Wi-Fi/Bluetooth Module 4 Specification - - > The UART interface operation includes: - Support data input/output operations for peripheral devices connected through a standard UART interface - 4-wire data transfer (RXD, TXD, RTS, CTS) - Programmable baud rate (1 200 bps to 4 Mbps) - Data format (LSB first) - Data bit: 5 bit to 8 bit - Parity bit: 0 bit to 4 bit - Stop bit: 1 bit to 2 bit ## **Interface Signals** |**Pin No.**|**Signal Name**|**Specification**<br>**Name**|**Type**|**Description**| |---|---|---|---|---| |F3|UART_SOUT|TXD|Host Controller<br>Interface (HCI)|Transmit data output| |F4|UART_SIN|RXD||Receive data input| |F5|UART_RTS|RTS||Request to send (active low)| |G5|UART_CTS|CTS||Clear to send (active low)| ## **Interface Transport Settings** |**Item**|**Range **|**Default**||**Comment**| |---|---|---|---|---| |Baudrate|1 200~4 000 000|3 000 000 Baud||3 000 000 Baud| |Data Bits|5~8||8 LSB first|8 LSB first| |ParityBits|0~4||0|0| |StopBit|1/1.5/2||1|1| ## **Supported Baud Rates** |**Baud**|**Baud**|**Baud**|**Baud**|**Baud**|**Baud**|**Baud**|**Baud**|**Baud**| |---|---|---|---|---|---|---|---|---| |1 200|2 400|4 800|9 600|19 200|38 400|57 600|76 800|115 200| |230 400|460 800|500 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000|921 600 1 000 000 1 382 400 1 500 000 1 843 200 2 000 000| |2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|2 100 000 2 764 800 3 000 000 3 250 000 3 692 300 4 000 000|||| Product Specification Rev. 1.3 Page 53 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## UART Timing Diagram ## **4.4.4 Peripheral Interface: GPIO Interface** The Peripheral Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to Digital Pin Characteristics. The General-Purpose I/O (GPIO) interface is used to implement user-defined input and output signals to and from the device, such as external interrupts and other user-defined I/Os. ## **Configurable GPIOs** |**Function**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**|**GPIO Pin Name**| |---|---|---|---|---|---|---|---|---| ||**IO0**|**IO1**|**IO2**|**IO3**|**IO12**|**IO13**|**IO14**|**IO15**| |GPIO IN|YES|YES|YES|YES|YES|YES|YES|YES| |GPIO OUT YES|GPIO OUT YES|YES|YES|YES|YES|YES|YES|YES| |IRQ IN|YES|YES|YES|YES|YES|YES|YES|YES| ## **LED Mode** |**Symbol**|**Parameter**|**Condition**|**Typ. **|**Units**| |---|---|---|---|---| |IOH|Switching Current High|Tristate on pin<br>(requires<br>pull-up)|Tristate when driving high|mA| |IOL|SwitchingCurrent Low|At 0.4 V|10|mA| Product Specification Rev. 1.3 Page 54 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 4 Specification ## **4.4.5 Audio Interface: PCM Interface** ## **Interface Signals** |**Pin No.**|**Signal Name**|**Specification**<br>**Name**|**Type**|**Description**| |---|---|---|---|---| |A1 PCM_DOUT|A1 PCM_DOUT|DOUT|Output|PCM data| |B1 PCM_CLK|B1 PCM_CLK|CLK|Input/Output|PCM clock signal, output if PCM<br>master, input if PCM slave| |B1 PCM_MCLK|B1 PCM_MCLK|MCLK|Output|PCM clock signal (optional),<br>optional clock used for some codecs,<br>derived from PCM_CLK| |B2 PCM_DIN|B2 PCM_DIN|DIN|Input|PCM data| |B3 PCM_SYNC|B3 PCM_SYNC|SYNC|Input/Output|PCM Sync pulse signal, output if PCM<br>master, input if PCM slave| ## **Modes of Operation** The PCM Interface supports two modes of operation: - PCM master - PCM slave When in PCM master mode, the interface generates a 2 MHz or a 2.048 MHz signal PCM_CLK and a 8 kHz signal PCM_SYNC signal. An alternative PCM master mode is available that uses an externally generated signal PCM_CLK, but still generates the 8 kHz signal PCM_SYNC. The external signal PCM_CLK must have a frequency that is an integer multiple of 8 kHz. Supported frequencies are in the 512 kHz to 4 MHz range. When in PCM slave mode, the interface has both signal PCM_CLK and signal PCM_SYNC as inputs, thereby letting another unit on the PCM bus generate the signals. The PCM interface consists of up to four PCM slots (time-devided) preceded by a PCM sync signal. Each PCM slot can be either 8 bits or 16 bits wide. The slots can be separated in time, but they are not required to follow immediately after another. The timing is relative to signal PCM_SYNC. ## **PCM Timing Data: Master Mode** |**Symbol**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---| |FBCLK||2/2.048||MHz| |DutyCycleBCLK|0.4|0.5|0.6|| |TBCLK rise/fall||3||ns| |TDO|||15|ns| |TDISU|20|||ns| |TDIHO|15|||ns| |TBF|||15|ns| Product Specification Rev. 1.3 Page 55 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module ## PCM Timing Diagram: Master Mode **==> picture [169 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> TBCLK<br>CLK<br>TTDO<br>DOUT<br>TDISU TDIHO<br>DIN<br>TBF<br>SYNC<br>**----- End of picture text -----**<br> ## **PCM Timing Data: Slave Mode** |**Symbol**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---| |FBCLK||2/2.048|2/2.048|MHz| |DutyCycleBCLK|0.4|0.5|0.5<br>0.6|| |TBCLK rise/fall||3|3|ns| |TDO|||30|ns| |TDISU|15|||ns| |TDIHO|10|||ns| |TBFSU|15|||ns| |TBFHO|10|||ns| ## PCM Timing Diagram: Slave Mode **==> picture [170 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> TBCLK<br>CLK<br>TTDO<br>DOUT<br>TDISU TDIHO<br>DIN<br>TBFSU TBFHO<br>SYNC<br>**----- End of picture text -----**<br> Product Specification Rev. 1.3 Page 56 of 89 > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## Panasonic 4 Specification ## **4.4.6 Coexistence Interface** **==> picture [31 x 31] intentionally omitted <==** **----- Start of picture text -----**<br> @<br>**----- End of picture text -----**<br> The Coexistence Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to Digital Pin Characteristics. ## **4.5 RF Electrical Characteristics** ## **4.5.1 WLAN Radio Specification** ## **Receive Mode** |**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---| |RF Frequency Range|2.4 GHz: IEEE 802.11b/g/n|2 400|2 483.5|2 483.5|MHz| ||5 GHz: IEEE 802.11a/n|4 900||5 925|MHz| |**Transmit Mode**|||||| |**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |RF Frequency Range|2.4 GHz: IEEE 802.11b/g/n|2 400|2 483.5|2 483.5|MHz| ||5 GHz: IEEE 802.11a/n|4 900||5 925|MHz| ## **Transmit Mode** ## **4.5.2 WLAN RF Characteristics** ## **4.5.2.1 RF Characteristics for IEEE 802.11b** @ Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF FrequencyRange|||2 400|2 483.5|2 483.5|MHz| |Carrier FrequencyTolerance|||-25||25|ppm| |Transmit Output Power||||16||dBm| |Spectrum Mask|fC±11 MHz||||-30|dBr| ||fC±22 MHz||||-50|| |Power-on/Power-down Ramp|||||2|µs| |RF Carrier Suppression|||||-15|dB| |Error Vector Magnitude (EVM)|Peak||||35|%| Product Specification Rev. 1.3 Page 57 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Minimum Receive Sensitivity|1 Mbps (DSSS)|FER ≤ 8 %||-98||dBm| ||2 Mbps (DSSS)|FER ≤ 8 %||-93|-80|dBm| ||5.5 Mbps (CCK)|FER ≤ 8 %||-91||dBm| ||11 Mbps (CCK)|FER ≤ 8 %||-89|-76|dBm| |Maximum Input Level||FER ≤ 8 %|||-10|dBm| |Adjacent Channel Rejection||FER ≤ 8 %|35|||dB| ## **4.5.2.2 RF Characteristics for IEEE 802.11g** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF FrequencyRange|||2 400|2 483.5|2 483.5|MHz| |Carrier FrequencyTolerance|||-25||25|ppm| |Transmit Output Power|6 Mbps to 36 Mbps|||+16||dBm| ||48 Mbps to 54 Mbps|||+15||dBm| |Spectrum Mask|fC±11 MHz||||-20|dBr| ||fC±20 MHz||||-28|dBr| ||fC±30 MHz||||-40|dBr| |Transmitter Center Frequency<br>Leakage|||||-15|dB| |Transmitter Spectral Flatness|||-4||4|dB| |Constellation Error (EVM)|BPSK, CR 1/2 (6 Mbps)||||-5|dB| ||BPSK, CR 3/4 (9 Mbps)||||-8|dB| ||QPSK, CR 1/2 (12 Mbps)||||-10|dB| ||QPSK, CR 3/4 (18 Mbps)||||-13|dB| ||16-QAM, CR 1/2 (24 Mbps)||||-16|dB| ||16-QAM, CR 3/4 (36 Mbps)||||-19|dB| ||64-QAM, CR 2/3 (48 Mbps)||||-22|dB| ||64-QAM, CR 3/4 (54 Mbps)||||-25|dB| Product Specification Rev. 1.3 Page 58 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Minimum Receive Sensitivity|BPSK, CR 1/2 (6 Mbps)|PER ≤ 10 %||-91|-82|dBm| ||BPSK, CR 3/4 (9 Mbps)|PER ≤ 10 %||-90|-81|dBm| ||QPSK, CR 1/2 (12 Mbps)|PER ≤ 10 %||-89|-79|dBm| ||QPSK, CR 3/4 (18 Mbps)|PER ≤ 10 %||-87|-77|dBm| ||16-QAM, CR 1/2 (24 Mbps)|PER ≤ 10 %||-84|-74|dBm| ||16-QAM, CR 3/4 (36 Mbps)|PER ≤ 10 %||-81|-70|dBm| ||64-QAM, CR 2/3 (48 Mbps)|PER ≤ 10 %||-77|-66|dBm| ||64-QAM, CR 3/4 (54 Mbps)|PER ≤ 10 %||-76|-65|dBm| |Maximum Input Level||PER ≤ 10 %|||-20|dBm| |Adjacent Channel Rejection|BPSK, CR 1/2 (6 Mbps)|PER ≤ 10 %|16|||dB| ||64-QAM, CR 3/4 (54 Mbps)|PER ≤ 10 %|-1|||dB| ## **4.5.2.3 RF Characteristics for IEEE 802.11n (BW 20 MHz, 2.4 GHz)** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF FrequencyRange|2.4 GHz||2 400|2 483.5|2 483.5|MHz| |Carrier Frequency Tolerance|||-25||25|ppm| |Transmit Output Power|MCS0 to MCS2|||+15||dBm| ||MCS3 to MCS4|||+15||dBm| ||MCS5 to MCS7|||+14||dBm| |Spectrum Mask|fC±11 MHz||||-20|dBr| ||fC±20 MHz||||-28|dBr| ||fC±30 MHz||||-45|dBr| |Transmitter Center Frequency<br>Leakage|||||-15|dB| |Transmitter Spectral Flatness|||-4||4|dB| |Constellation Error (EVM)|BPSK, CR 1/2 (MCS0)||||-5|dB| ||QPSK, CR 1/2 (MCS1)||||-10|dB| ||QPSK, CR 3/4 (MCS2)||||-13|dB| ||16-QAM, CR 1/2 (MCS3)||||-16|dB| ||16-QAM, CR 3/4 (MCS4)||||-19|dB| ||64-QAM, CR 2/3 (MCS5)||||-22|dB| ||64-QAM, CR 3/4 (MCS6)||||-25|dB| ||64-QAM, CR 5/6 (MCS7)||||-27|dB| ||6.5 Mbps (MCS0)|PER ≤ 10 %||-90|-82|dBm| Product Specification Rev. 1.3 Page 59 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Minimum Receive Sensitivity20|13 Mbps (MCS1)|PER ≤ 10 %||-88|-79|dBm| ||19.5 Mbps (MCS2)|PER ≤ 10 %||-86|-77|dBm| ||26 Mbps (MCS3)|PER ≤ 10 %||-83|-74|dBm| ||39 Mbps (MCS4)|PER ≤ 10 %||-80|-70|dBm| ||52 Mbps (MCS5)|PER ≤ 10 %||-76|-66|dBm| ||58.5 Mbps (MCS6)|PER ≤ 10 %||-74|-65|dBm| ||65 Mbps (MCS7)|PER ≤ 10 %||-73|-64|dBm| |Maximum Input Level||PER ≤ 10 %|||-20|dBm| |Adjacent Channel Rejection21|65 Mbps (MCS7)|PER ≤ 10 %|-2|||dB| ## **4.5.2.4 RF Characteristics for IEEE 802.11n (BW 40 MHz, 2.4 GHz)** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF FrequencyRange|2.4 GHz||2 400|2 483.5|2 483.5|MHz| |Carrier FrequencyTolerance|||-25||+25|ppm| |Transmit Output Power|MCS0 to MCS2|||+14||dBm| ||MCS3 to MCS4|||+14||dBm| ||MCS5 to MCS7|||+13||dBm| |Spectrum Mask|fC±21 MHz||||-20|dBr| ||fC±40 MHz||||-28|dBr| ||fC±60 MHz||||-45|dBr| |Transmitter Center Frequency<br>Leakage|||||-20|dB| |Transmitter Spectral Flatness|||-4||4|dB| |Constellation Error (EVM)|BPSK, CR 1/2 (MCS0)||||-5|dB| ||QPSK, CR 1/2 (MCS1)||||-10|dB| ||QPSK, CR 3/4 (MCS2)||||-13|dB| ||16-QAM, CR 1/2 (MCS3)||||-16|dB| ||16-QAM, CR 3/4 (MCS4)||||-19|dB| ||64-QAM, CR 2/3 (MCS5)||||-22|dB| ||64-QAM, CR 3/4 (MCS6)||||-25|dB| ||64-QAM, CR 5/6 (MCS7)||||-27|dB| 20 The Minimum Sensitivity levels apply only to non-STBC modes, MCS 0~7, 800 ns LGI, and BCC. 21 The Adjacent Channel Rejection levels apply only to non-STBC modes, MCS 0~7, 800 ns LGI, and BCC. Product Specification Rev. 1.3 Page 60 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Minimum Receive Sensitivity20|13.5 Mbps (MCS0)|PER ≤ 10 %||-86|-79|dBm| ||27 Mbps (MCS1)|PER ≤ 10 %||-85|-76|dBm| ||40.5 Mbps (MCS2)|PER ≤ 10 %||-83|-74|dBm| ||54 Mbps (MCS3)|PER ≤ 10 %||-80|-71|dBm| ||81 Mbps (MCS4)|PER ≤ 10 %||-77|-67|dBm| ||108 Mbps (MCS5)|PER ≤ 10 %||-73|-63|dBm| ||121.5 Mbps (MCS6)|PER ≤ 10 %||-71|-62|dBm| ||135 Mbps (MCS7)|PER ≤ 10 %||-69|-61|dBm| |Maximum Input Level||PER ≤ 10 %|||-20|dBm| |Adjacent Channel Rejection21|135 Mbps (MCS7)|PER ≤ 10 %|-2|||dB| ## **4.5.2.5 RF Characteristics for IEEE 802.11n (BW 20 MHz, 5 GHz)** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF Frequency Range|5 GHz U-NII-1||5 150||5 250|MHz| ||5 GHz U-NII-2A||5 250||5 350|MHz| ||5 GHz U-NII-2C||5 470||5 725|MHz| ||5 GHz U-NII-3||5 725||5 825|MHz| |Carrier Frequency Tolerance|||-20||20|ppm| |Transmit Output Power|MCS0 to MCS2|||+15||dBm| ||MCS3 to MCS4|||+15||dBm| ||MCS5 to MCS7|||+14||dBm| |Spectrum Mask|fC±11 MHz||||-20|dBr| ||fC±20 MHz||||-28|dBr| ||fC±30 MHz||||-40|dBr| |Transmitter Center Frequency<br>Leakage|||||-15|dB| |Transmitter Spectral Flatness|||-4||4|dB| Product Specification Rev. 1.3 Page 61 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Constellation Error (EVM)|BPSK, CR 1/2 (MCS0)||||-5|dB| ||QPSK, CR 1/2 (MCS1)||||-10|dB| ||QPSK, CR 3/4 (MCS2)||||-13|dB| ||16-QAM, CR 1/2 (MCS3)||||-16|dB| ||16-QAM, CR 3/4 (MCS4)||||-19|dB| ||64-QAM, CR 2/3 (MCS5)||||-22|dB| ||64-QAM, CR 3/4 (MCS6)||||-25|dB| ||64-QAM, CR 5/6 (MCS7)||||-27|dB| |Minimum Receive Sensitivity20|6.5 Mbps (MCS0)|PER ≤ 10 %||-89|-82|dBm| ||13 Mbps (MCS1)|PER ≤ 10 %||-88|-79|dBm| ||19.5 Mbps (MCS2)|PER ≤ 10 %||-85|-77|dBm| ||26 Mbps (MCS3)|PER ≤ 10 %||-82|-74|dBm| ||39 Mbps (MCS4)|PER ≤ 10 %||-79|-70|dBm| ||52 Mbps (MCS5)|PER ≤ 10 %||-74|-66|dBm| ||58.5 Mbps (MCS6)|PER ≤ 10 %||-73|-65|dBm| ||65 Mbps (MCS7)|PER ≤ 10 %||-71|-64|dBm| |Maximum Input Level||PER ≤ 10 %|||-30|dBm| |Adjacent Channel Rejection21|65 Mbps (MCS7)|PER ≤ 10 %|-2|||dB| ## **4.5.2.6 RF Characteristics for IEEE 802.11n (BW 40 MHz, 5 GHz)** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF Frequency Range|5 GHz U-NII-1||5 150||5 250|MHz| ||5 GHz U-NII-2A||5 250||5 350|MHz| ||5 GHz U-NII-2C||5 470||5 725|MHz| ||5 GHz U-NII-3||5 725||5 825|MHz| |Carrier Frequency Tolerance|||-20||20|ppm| |Transmit Output Power|MCS0 to MCS2|||+14||dBm| ||MCS3 to MCS4|||+14||dBm| ||MCS5 to MCS7|||+13||dBm| |Spectrum Mask|fC±21 MHz||||-20|dBr| ||fC±40 MHz||||-28|dBr| ||fC±60 MHz||||-40|dBr| Product Specification Rev. 1.3 Page 62 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Transmitter Center Frequency<br>Leakage|||||-20|dB| |Transmitter Spectral Flatness|||-4||4|dB| |Constellation Error (EVM)|BPSK, CR 1/2 (MCS0)||||-5|dB| ||QPSK, CR 1/2 (MCS1)||||-10|dB| ||QPSK, CR 3/4 (MCS2)||||-13|dB| ||16-QAM, CR 1/2 (MCS3)||||-16|dB| ||16-QAM, CR 3/4 (MCS4)||||-19|dB| ||64-QAM, CR 2/3 (MCS5)||||-22|dB| ||64-QAM, CR 3/4 (MCS6)||||-25|dB| ||64-QAM, CR 5/6 (MCS7)||||-27|dB| |Minimum Receive Sensitivity20|13.5 Mbps (MCS0)|PER ≤ 10 %||-86|-79|dBm| ||27 Mbps (MCS1)|PER ≤ 10 %||-85|-76|dBm| ||40.5 Mbps (MCS2)|PER ≤ 10 %||-82|-74|dBm| ||54 Mbps (MCS3)|PER ≤ 10 %||-79|-71|dBm| ||81 Mbps (MCS4)|PER ≤ 10 %||-76|-67|dBm| ||108 Mbps (MCS5)|PER ≤ 10 %||-72|-63|dBm| ||121.5 Mbps (MCS6)|PER ≤ 10 %||-70|-62|dBm| ||135 Mbps (MCS7)|PER ≤ 10 %||-69|-61|dBm| |Maximum Input Level||PER ≤ 10 %|||-30|dBm| |Adjacent Channel Rejection21|135 Mbps (MCS7)|PER ≤ 10 %|-2|||dB| ## **4.5.2.7 RF Characteristics for IEEE 802.11a** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF Frequency Range|5 GHz U-NII-1||5 150||5 250|MHz| ||5 GHz U-NII-2A||5 250||5 350|MHz| ||5 GHz U-NII-2C||5 470||5 725|MHz| ||5 GHz U-NII-3||5 725||5 825|MHz| |Carrier Frequency Tolerance|||-20||20|ppm| |Transmit Output Power|6 Mbps to 36 Mbps|||+16||dBm| ||48 Mbps to 54 Mbps|||+15||dBm| |Spectrum Mask|fC±11 MHz||||-20|dBr| ||fC±20 MHz||||-28|dBr| ||fC±30 MHz||||-40|dBr| Product Specification Rev. 1.3 Page 63 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Parameter**|**Condition**|**Min.**|**Typ. **|**Max.**|**Units**| |---|---|---|---|---|---|---| |Transmitter Center Frequency<br>Leakage|||||-15|dB| |Transmitter Spectral Flatness|||-4||4|dB| |Constellation Error (EVM)|BPSK, CR 1/2 (6 Mbps)||||-5|dB| ||BPSK, CR 3/4 (9 Mbps)||||-8|dB| ||QPSK, CR 1/2 (12 Mbps)||||-10|dB| ||QPSK, CR 3/4 (18 Mbps)||||-13|dB| ||16-QAM, CR 1/2 (24 Mbps)||||-16|dB| ||16-QAM, CR 3/4 (36 Mbps)||||-19|dB| ||64-QAM, CR 2/3 (48 Mbps)||||-22|dB| ||64-QAM, CR 3/4 (54 Mbps)||||-25|dB| |Minimum Receive Sensitivity|BPSK, CR 1/2 (6 Mbps)|PER ≤ 10 %||-90|-82|dBm| ||BPSK, CR 3/4 (9 Mbps)|PER ≤ 10 %||-90|-81|dBm| ||QPSK, CR 1/2 (12 Mbps)|PER ≤ 10 %||-89|-79|dBm| ||QPSK, CR 3/4 (18 Mbps)|PER ≤ 10 %||-86|-77|dBm| ||16-QAM, CR 1/2 (24 Mbps)|PER ≤ 10 %||-84|-74|dBm| ||16-QAM, CR 3/4 (36 Mbps)|PER ≤ 10 %||-80|-70|dBm| ||64-QAM, CR 2/3 (48 Mbps)|PER ≤ 10 %||-76|-66|dBm| ||64-QAM, CR 3/4 (54 Mbps)|PER ≤ 10 %||-75|-65|dBm| |Maximum Input Level||PER ≤ 10 %|||-30|dBm| |Adjacent Channel Rejection|BPSK, CR 1/2 (6 Mbps)|PER ≤ 10 %|16|||dB| ||64-QAM, CR 3/4 (54 Mbps)|PER ≤ 10 %|-1|||dB| ## **4.5.3 Bluetooth RF Characteristics** Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. ## **4.5.3.1 Receiver Section RF Characteristics** |**Parameter**|**Condition**|**Condition**|**Min.**|**Typ.**|**Max.**|**Units**| |---|---|---|---|---|---|---| |RF FrequencyRange|||2 400||2 483.5|2 483.5<br>MHz| |Interference Performance<br>(Basic Rate)<br>C/I Ratio|GFSK<br>RSL = -67 dBm<br>BER ≤ 0.1 %|C/I (Co-channel)|||11|11<br>dB| |||C/I (1 MHz)|||0|0<br>dB| |||C/I (2 MHz)|||-30|-30<br>dB| |||C/I (3 MHz)|||-40|-40<br>dB| |||C/I (Image)|||-9|-9<br>dB| |||C/I (Image ±1 MHz)|||-20|-20<br>dB| Product Specification Rev. 1.3 Page 64 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Condition**|**Condition**|**Min.**|**Typ.**|**Max.**|**Units**| |---|---|---|---|---|---|---| |Interference Performance<br>(Enhanced Data Rate)<br>C/I Ratio|π/4-DQPSK<br>RSL = -67 dBm<br>BER≤0.01 %|C/I (Co-channel)|||13|dB| |||C/I (1 MHz)|||0|dB| |||C/I (2 MHz)|||-30|dB| |||C/I (3 MHz)|||-40|dB| |||C/I (Image)|||-7|dB| |||C/I (Image ±1 MHz)|||-20|dB| ||8-DPSK<br>RSL = -67 dBm<br>BER≤0.01 %|C/I (Co-channel)|||21|dB| |||C/I (1 MHz)|||5|dB| |||C/I (2 MHz)|||-25|dB| |||C/I (3 MHz)|||-33|dB| |||C/I (Image)|||0|dB| |||C/I (Image ±1 MHz)|||-13|dB| |Interference Performance (LE)<br>C/I Ratio|GFSK<br>RSL = -67 dBm<br>BER≤0.1 %<br>1 Mbps|C/I (Co-channel)|||21|dB| |||C/I (1 MHz)|||15|dB| |||C/I (2 MHz)|||-17|dB| |||C/I (3 MHz)|||-27|dB| |||C/I (Image)|||-9|dB| |||C/I (Image ±1 MHz)|||-15|dB| |Minimum Receive Sensitivity|BR, DH1|BER ≤ 0.1 %||-94|-70|dBm| ||EDR, 2DH1|BER≤0.01 %||-90|-70|dBm| ||LE, GFSK|BER ≤ 0.1 %||-90|-70|dBm| ## **4.5.3.2 Transmitter Section RF Characteristics** |**Parameter**|**Condition**|**Min.**|**Typ.**|**Max.**|**Units**| |---|---|---|---|---|---| |RF FrequencyRange||2 400||2 483.5|MHz| |Maximum Output Power|Basic Rate (BR)||+8||dBm| ||Enhanced Data Rate (EDR)||+6||dBm| ||LE||+6||dBm| Product Specification Rev. 1.3 Page 65 of 89 ## INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 4 Specification ## INDUSTRY Panasonic 4 Specification |**Parameter**|**Condition**|**Condition**|**Min.**|**Typ.**|**Max.**|**Units**| |---|---|---|---|---|---|---| |Gain Range|Gain control|||30||dB| |Gain Resolution||||0.5||dB| |Spurious Emission (BR) (in-<br>band)|±500 kHz||||-20|dBc| ||±2 MHz, |M-N| = 2||||-20|dBm| ||±3 MHz or greater, |M-N|≥3||||-40|dBm| |Spurious Emission (EDR) (in-<br>band)|±1 MHz||||-26|dBc| ||±1.5 MHz||||-20|dBm| ||±2.5 MHz||||-40|dBm| |Spurious Emission (LE) (in-<br>band)|1 Mbps|±2 MHz, |M-N| = 2|||-20|dBm| |||±3 MHz or greater, |M-N|≥3|||-30|dBm| ## **4.6 Reliability Tests** The measurement should be done after the test module has been exposed to room temperature and humidity for one hour. |**No.**|**Item**|**Limit**|**Condition**| |---|---|---|---| |1 Vibration test|1 Vibration test|Electrical parameter are in<br>specification|Freq.: 10 Hz~50 Hz; Amplitude: 1.5 mm;<br>20 min./cycle, 1 h each of XYZ axis| |2 Shock test|2 Shock test||Dropped 3 times onto hard wood from a<br>height of 1 m| |3 Heat cycle test|3 Heat cycle test||-40 °C for 30 min. and 85 °C for 30 min.;<br>each temperature 300 cycles| |4 Moisture test|4 Moisture test||60 °C, 90 % RH, 300 h| |5 Low tem|5 Low temperature test||-40 °C, 300 h| |6 Hi|6 High temperature test||85 °C, 300 h| Product Specification Rev. 1.3 Page 66 of 89 4 Specification PAN9026 Wi-Fi/Bluetooth Module **==> picture [4 x 1] intentionally omitted <==** **----- Start of picture text -----**<br> <br>**----- End of picture text -----**<br> ## **4.7 Recommended Soldering Profile** - Reflow permissible cycles: 2 - Opposite side reflow is prohibited due to module weight - More than 75 percent of the soldering area shall be coated by solder - • The soldering profiles should be adhered to in order to prevent electrical or mechanical damage - Soldering profile assumes lead-free soldering Product Specification Rev. 1.3 Page 67 of 89 INDUSTRY Panasonic 5 Cautions - - > PAN9026 Wi-Fi/Bluetooth Module ## **5 Cautions** Failure to follow the guidelines set forth in this document may result in degrading of the module functions and damage to the module. ## **5.1 Design Notes** 1. Follow the conditions written in this specification, especially the control signals of this module. 2. The supply voltage should abide by the maximum ratings ( 4.2 Absolute Maximum Ratings). 3. The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47 µF directly at the module). 4. This module should not be mechanically stressed when installed. 5. Keep this module away from heat. Heat is the major cause of decreasing the life time of these modules. 6. Avoid assembly and use of the target equipment in conditions where the module temperature may exceed the maximum tolerance. 7. Keep this module away from other high frequency circuits. 8. Refer to the recommended pattern when designing a board. ## **5.2 Installation Notes** 1. Reflow soldering is possible twice based on the conditions set forth in 4.7 Recommended Soldering Profile. Set up the temperature at the soldering portion of this module according to this reflow profile. 2. Carefully position the module so that the heat will not burn into printed circuit boards or affect other components that are susceptible to heat. 3. Carefully locate the module, to avoid an increased temperature caused by heat generated by neighboring components. 4. If a vinyl-covered wire comes into contact with the module, the wire cover will melt and generate toxic gas, damaging the insulation. Never allow contact between a vinyl cover and these modules to occur. 5. This module should not be mechanically stressed or vibrated when reflowed. 6. To repair the board by hand soldering, follow the conditions set forth in this chapter. 7. Do not wash this product. 8. Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the module. Product Specification Rev. 1.3 Page 68 of 89 INDUSTRY Panasonic 5 Cautions PAN9026 Wi-Fi/Bluetooth Module 5 Cautions - - > ## **5.3 Usage Condition Notes** 1. Take measures to protect the module against static electricity. If pulses or transient loads (a large load, which is suddenly applied) are applied to the modules, check and evaluate their operation before assembly of the final products. 2. Do not use dropped modules. 3. Do not touch, damage, or soil the pins. 4. Follow the recommended condition ratings about the power supply applied to this module. 5. Electrode peeling strength: Do not apply a force of more than 4.9 N in any direction on the soldered module. 6. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. 7. These modules are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information, and communication equipment. ## **5.4 Storage Notes** 1. The module should not be stressed mechanically during storage. 2. Do not store these modules in the following conditions or the performance characteristics of the module, such as RF performance will be adversely affected: - Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX, - Storage in direct sunlight, - Storage in an environment where the temperature may be outside the range of 5 °C to 35 °C, or where the humidity may be outside the 45 % to 85 % range, - Storage of the modules for more than one year after the date of delivery storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. 3. Keep this module away from water, poisonous gas, and corrosive gas. 4. This module should not be stressed or shocked when transported. 5. Follow the specification when stacking packed crates (max. 10). ## **5.5 Safety Cautions** These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, provide the following failsafe functions as a minimum: Product Specification Rev. 1.3 Page 69 of 89 INDUSTRY > PAN9026 Wi-Fi/Bluetooth Module 5 Cautions INDUSTRY Panasonic 5 Cautions 1. Ensure the safety of the whole system by installing a protection circuit and a protection device. 2. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. ## **5.6 Other Cautions** 1. Do not use the module for other purposes than those listed in section 5.3 Usage Condition Notes. 2. Be sure to provide an appropriate fail-safe function on your product to prevent any additional damage that may be caused by the abnormal function or the failure of the module. 3. This module has been manufactured without any ozone chemical controlled under the Montreal Protocol. 4. These modules are not intended for use under the special conditions shown below. Before using these modules under such special conditions, carefully check their performance and reliability under the said special conditions to determine whether or not they can be used in such a manner: - In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash, - In direct sunlight, outdoors, or in a dusty environment, - In an environment where condensation occurs, - In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX). 5. If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these modules with new modules, because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. For further information please refer to the Panasonic website 7.2.2 Product Information. Product Specification Rev. 1.3 Page 70 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY Panasonic 5 Cautions ## **5.7 Restricted Use** ## **5.7.1 Life Support Policy** This Panasonic Industrial Devices Europe GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any damages resulting. ## **5.7.2 Restricted End Use** This Panasonic Industrial Devices Europe GmbH product is not designed for any restricted activity that supports the development, production, handling usage, maintenance, storage, inventory or proliferation of any weapons or military use. Transfer, export, re-export, usage or reselling of this product to any destination, end user or any end use prohibited by the European Union, United States or any other applicable law is strictly prohibited. Product Specification Rev. 1.3 Page 71 of 89 6 Regulatory and Certification Information PAN9026 Wi-Fi/Bluetooth Module ## **6 Regulatory and Certification Information** ## **6.1 Federal Communications Commission (FCC) for US** ## **6.1.1 FCC Notice** © The PAN9026 including the ceramic antenna (ENWF9201A1EF and ENWF9208A1EF), and the antennas, which are listed in 6.1.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. The transmitter operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. ## **6.1.2 Caution** The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna, - Increase the separation between the equipment and receiver, - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, - Consult the dealer or an experienced radio/TV technician for help. Product Specification Rev. 1.3 Page 72 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY Panasonic 6 Regulatory and Certification Information ## **6.1.3 Label Requirements** The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is **FCC ID: T7V-9026** . This FCC identifier is valid for the PAN9026. The end product must in any case be labelled on the exterior with: "Contains FCC ID: T7V-9026". ## **6.1.4 Antenna Warning** This antenna warning refers to the test device with the model number PAN9026 in bottom pad mode RF-Switch Pins Function. The device is tested with a standard SMA connector and with the antenna listed below. When integrated into the OEM’s product, these fixed antennas require installation preventing end users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and with Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in 6.1.5 Approved Antenna List is the same ( **FCC ID: T7V-9026** ). ## **6.1.5 Approved Antenna List** |**Item**|**Part Number**|**Manufacturer**|**Type**|**Polarization**|**Frequency Band**|**Gain (dBi)**|**Gain (dBi)**| |---|---|---|---|---|---|---|---| |||||||**Min**|**Peak**| |1 ANT162442DT-|1 ANT162442DT-<br>2001A2|TDK|Chip<br>Antenna|Linear|2.400 GHz to<br>2.484 GHz|-36|2.1| ||||||5.150 GHz to<br>5.850 GHz|-42|1.5| Product Specification Rev. 1.3 Page 73 of 89 6 Regulatory and Certification Information PAN9026 Wi-Fi/Bluetooth Module - - > ## INDUSTRY Panasonic ## **6.1.6 RF Exposure** To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 6.1.5 Approved Antenna List. The preceding statement must be included as a “CAUTION” statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of the PAN9026 with a mounted ceramic antenna ( **FCC ID: T7V-9026** ) is below the FCC radio frequency exposure limits. The PAN9026 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. ## **6.1.7 Integration Instructions** This chapter gives integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01. |**Section**|**Topic and Comment**|**Topic and Comment**| |---|---|---| |**2.2**|**List of applicable FCC rules**|| ||47 CFR Section|Part 15C| ||FrequencyBand (MHz)|2 400 to 2 483.5| ||Systems|Digital Transmission Systems operating within the 2 400 MHz to 2<br>483.5 MHz Band| ||Reference/Requirement|15.247(a)(2), 15.247(b)(1), 15.207, 15.247(d), 15.247(e)| ||Complied Module M/N|ENWF9201A1EF, ENWF9208A1EF| |||| ||47 CFR Section|Part 15C| ||FrequencyBand (MHz)|2 400 to 2 483.5| ||Systems|Frequency Hopping Systems operating within the 2 400 MHz to<br>2 483.5 MHz Band| ||Reference/Requirement|15.247(a)(1), 15.247(a)(1)(iii), 15.247(b)(1), 15.207, 15.247(d)| ||Complied Module M/N|ENWF9201A1EF, ENWF9208A1EF| |||| ||47 CFR Section|Part 15E| Product Specification Rev. 1.3 Page 74 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic ## 6 Regulatory and Certification Information ||Systems|Unlicensed National Information Infrastructure Devices in the 5 GHz<br>Bands| |---|---|---| ||Reference Method|KDB 905462 D02 v02| ||Reference/Requirement|15E.407(h)(2)| ||Complied Module M/N|ENWF9201A1EF| |**2.3**|**Summarize the specific operational use conditions**|| ||Please refer to sections5 Cautions,5.3 Usage Condition Notes, and6.1.5 Approved<br>Antenna List.|| |**2.4**|**Limited moduleprocedures**|| ||Not applicable, the module has a single-modular transmitter approval.|| |**2.5**|**Trace antenna designs**|| ||Not applicable, the module has a ceramic chip antenna. For guidance regarding the PCB layout<br>requirements for module integration refer to the Design Guide 7.2.2 Product Information.|| |**2.6**|**RF exposure considerations**|| ||Mobile application, the end customer has to assure that the device has a distance of more than<br>20 cm from the human body under all circumstances.|| |**2.7**|**Antennas**|| ||Please refer to sections6.1.4 Antenna Warning and 6.1.5 Approved Antenna List.|| |**2.8**|**Label and compliance information**|| ||Please refer to section6.1.3 Label Requirements.|| |**2.9**|**Information on test modes and additional testing requirements**|| ||The documents for integration guidance and compliance testing are available here<br>7.2.2 Product Information.|| |**2.10**|**Additional testing, Part 15 Subpart B disclaimer**|| ||The single-modular transmitter is FCC authorized for the specific rule parts listed at section 2.2<br>“List of applicable FCC rules“.<br>The host product manufacturer needs to also consider the FCC requirements for certified modular<br>transmitter being used in the host product and maintain documentation on how the host product<br>with the certified modular transmitter complies with the FCC rules. Host product manufacturers are<br>responsible to follow the integration guidance and to perform a limited set of transmitter module<br>verification testing, to ensure the end product is in compliance with the FCC rules. Also host<br>product manufacturers are responsible for all additional equipment authorization and testing for<br>technical requirements not covered by the module grant (e.g., unintentional radiator Part 15<br>Subpart B requirements, or transmitters used in the host that are not certified modules).|| Product Specification Rev. 1.3 Page 75 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY Panasonic 6 Regulatory and Certification Information ## **6.2 Innovation, Science, and Economic Development (ISED) for Canada** ## **English** The PAN9026 is licensed to meet the regulatory requirements of ISED. License ID: **IC: 216Q-9026** Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in 6.1.5 Approved Antenna List, having a maximum gain of 2.1 dBi for 2.4 GHz and 1.5 dBi for 5 GHz. Antennas not included in this list or having a gain greater than 2.1 dBi for 2.4 GHz and 1.5 dBi for 5 GHz are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size, the IC identifier is displayed in the installation instruction only and it cannot be displayed on the module’s label due to the limited size. ## **French** PAN9026 est garanti conforme aux dispositions règlementaires d’Industry Canada (ISED). License: **IC: 216Q-9026** Il est recommandé aux fabricants d’appareils fixes, mobiles ou portables de consulter la réglementation en vigueur et de vérifier la conformité de leurs produits relativement aux limites d’exposition aux rayonnements radiofréquence ainsi qu’au débit d’absorption spécifique maximum autorisé. Des informations pour les utilisateurs sur la réglementation Canadienne concernant l’exposition aux rayonnements RF sont disponibles sur le site www.ic.gc.ca. Ce produit a été développé pour fonctionner spécifiquement avec les antennes listées dans le tableau 6.1.5 Approved Antenna List, présentant un gain maximum de 2.1 dBi pour 2.4 GHz et 1.5 dBi pour 5 GHz. Des antennes autres que celles listées ici, ou présentant un gain supérieur à 2.1 dBi pour 2.4 GHz et 1.5 dBi pour 5 GHz ne doivent en aucune circonstance être utilisées en combinaison avec ce produit. L’impédance des antennes compatibles est 50 Ohm. L’antenne utilisée avec ce produit ne doit ni être située à proximité d’une autre antenne ou d’un autre émetteur, ni être utilisée conjointement avec une autre antenne ou un autre émetteur. En raison de la taille du produit, l’identifiant IC est fourni dans le manuel d’installation. Product Specification Rev. 1.3 Page 76 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY 6 Regulatory and Certification Information Panasonic ## **6.2.1 Radio Standards Specification RSS-247 Issue 2** The Radio Standards Specification RSS-247, Issue 2, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and License-Exempt Local Area Network (LE-LAN) Devices, replaces RSS-247, Issue 1, dated May 2015. It sets out certification requirements for radio apparatus operating in the bands 2 400 MHz to 2 483.5 MHz and 5 725 MHz to 5 850 MHz employing frequency hopping, digital modulation and/or a combination (hybrid) of both techniques. It also includes license exempt local area network (LE-LAN) devices operating in the bands 5 150 MHz to 5 250 MHz, 5 250 MHz to 5 350 MHz, 5 470 MHz to 5 725 MHz and 5 725 MHz to 5 850 MHz as specified in SP-5 150 MHz. ## **6.2.1.1 General** Equipment covered by the standard RSS-247 is classified as Category I equipment. Either a technical acceptance certificate (TAC) issued by the Certification and Engineering Bureau of Innovation, Science and Economic Development Canada (ISED) or a certificate issued by a certification body (CB) is required. ## **6.2.1.2 Certification Requirements** RSS-247 shall be used in conjunction with RSS-Gen, General Requirements for Compliance of Radio Apparatus, for general specifications and information relevant to the equipment for which this standard applies. Equipment certified under the standard is required to comply with the `‑` provisions in RSS Gen with respect to emissions falling within restricted frequency bands. `‑` These restricted frequency bands are listed in RSS Gen. ## **6.2.1.3 Measurement Method** In addition to the requirements in RSS-Gen and the requirements of the standard RSS-247, the method for measuring DTS devices is provided in ANSI C63.10. ## **6.2.1.4 FHS and DTS Operating in the Bands 2 400 MHz to 2 483.5 MHz** This section applies to frequency hopping systems (FHSs) in the bands 2 400 MHz to 2 483.5 MHz and 5 725 MHz to 5 850 MHz and digital transmission systems (DTSs) in the band 2 400 MHz to 2 483.5 MHz. Systems in these bands can be frequency hopping, digital transmission and/or a combination (hybrid) of both types. The digital transmission technology of DTSs or hybrid systems operating in the band 5 725 MHz to 5 850 MHz shall comply with the requirement in section Technical requirements for license-exempt local area network devices and digital transmission systems operating in the 5 GHz band. Product Specification Rev. 1.3 Page 77 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic ## 6 Regulatory and Certification Information |**RSS-247 Section**|5.1| |---|---| |**Frequency Band (MHz)**|2 400 to 2 483.5| |**Systems**|FrequencyHoppingSystems| |**Systems out of Scope**|FHS operating in the band 5 725 MHz to 5 850 MHz| ||Fixedpoint-to-point systems| |**Requirements**|The maximum peak conducted output power shall not exceed W if the hopset| ||uses 75 or more hopping channels; the maximum peak conducted output| ||power shall not exceed 0.125 W if the hopset uses less than 75 hopping| ||channels.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| ||| |**RSS-247 Section**|5.2| |**Frequency Band (MHz)**|2 400 to 2 483.5| |**Systems**|Digital Transmission Systems| |**Systems out of Scope **|-| |**Requirements**|The minimum 6 dB bandwidth shall be 500 kHz.| ||The transmitter power spectral density conducted from the transmitter to the| ||antenna shall not be greater than 8 dBm in any 3 kHz band during any time| ||interval of continuous transmission.| ||The maximum peak conducted output power shall not exceed 1 W. The e.i.r.p.| ||shall not exceed 4 W.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| ||| |**RSS-247 Section**|5.3| |**Frequency Band (MHz)**|2 400 to 2 483.5| |**Systems**|Hybrid Systems| |**Systems out of Scope **|Hybrid devices operatingin the band 5 725 MHz to 5 850 MHz.| |**Requirements**|With the digital transmission operation of the hybrid system turned off, the| ||frequency hopping operation shall have an average time of occupancy on any| ||frequency not exceeding 0.4 seconds within a duration in seconds equal to the| ||number of hopping frequencies multiplied by 0.4.| ||With the frequency hopping turned off, the digital transmission operation shall| ||comply with the power spectral density requirements for digital modulation| ||systems set out in section “5.2”RSS-247 Section.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| Product Specification Rev. 1.3 Page 78 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic ## 6 Regulatory and Certification Information |**RSS-247 Section**|5.4| |---|---| |**Frequency Band (MHz)**|2 400 to 2 483.5| |**Systems**|FHSs operating in the band 2 400 to 2 483.5 MHz.| ||DTSs employing digital modulation techniques operating in the band| ||2 400 MHz to 2 483.5 MHz.| |**Systems out of Scope**|•FHSs operating in the band 902 MHz to 928 MHz and 5 725 MHz to| ||5 850 MHz.| ||•DTSs employing digital modulation techniques operating in the bands| ||902 MHz to 928 MHz.| ||•Fixed point-to-point systems in the bands 2 400 MHz to 2 483.5 MHz and| ||5 725 MHz to 5 850 MHz.| ||•Transmitters operating in the band 2 400 MHz to 2 483.5 MHz, may employ| ||antenna systems that emit multiple directional beams simultaneously or| ||sequentially.| |**Requirements**|Transmitter Output Power:| ||The maximum peak conducted output power shall not exceed 1 W if the| ||hopset uses 75 or more hopping channels; the maximum peak conducted| ||output power shall not exceed 0.125 W if the hopset uses less than 75| ||hopping channels. The e.i.r.p. shall not exceed 4 W.| ||For DTSs employing digital modulation techniques operating in the band| ||2 400 MHz to 2 483.5 MHz, the maximum peak conducted output power shall| ||not exceed W. The e.i.r.p. shall not exceed 4 W.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| ||| |**RSS-247 Section**|5.5| |**Frequency Band (MHz)**|2 400 to 2 483.5| |**System**|In any 100 kHz bandwidth outside the frequency band in which the spread| ||spectrum or digitally modulated device is operating …| |**System out of Scope **|-| |**Requirements**|Unwanted Emissions:| ||In any 100 kHz bandwidth outside the frequency band in which the spread| ||spectrum or digitally modulated device is operating, the RF power that is| ||produced shall be at least 20 dB below that in the 100 kHz bandwidth within| ||the band that contains the highest level of the desired power, based on either| ||an RF conducted or a radiated measurement, provided that the transmitter| ||demonstrates compliance with the peak conducted power limits. If the| ||transmitter complies with the conducted power limits based on the use of root-| ||mean-square averaging over a time interval the attenuation required shall be| ||30 dB instead of 20 dB. Attenuation below the general field strength limits| ||specified in RSS-Gen is not required.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| Product Specification Rev. 1.3 Page 79 of 89 > PAN9026 Wi-Fi/Bluetooth Module INDUSTRY Panasonic 6 Regulatory and Certification Information ## **6.2.1.5 Requirements for LE-LAN and DTS Operating in the 5 GHz Band** The section provides standards for Licence-Exempt Local Area Network (LE-LAN) devices operating in the bands: - 5 150 to 5 250 MHz, - 5 250 to 5 350 MHz, - 5 470 to 5 600 MHz, - 5 650 to 5 725 MHz, - 5 725 to 5 850 MHz For DTSs operating in the band 5 725 MHz to 5 850 MHz that employ digital modulation technology, but are not designed for LE-LAN operation. Devices with occupied bandwidths which overlap different bands shall comply with all operational requirements for each band. |**RSS-247 Section**|6.2.1| |---|---| |**Frequency Band (MHz)**|5 150 to 5 250| |**Device Type **|LE-LAN devices are restricted to**indoor operation**only.| |**Devices out of Scope **|OEM devices installed in vehicles.| |**Power Limits**|Maximum e.i.r.p. shall not exceed 200 mW or 10+10 log10B, dBm, whichever<br>power is less. B is the 99 % emission bandwidth in megahertz. The e.i.r.p.<br>spectral density shall not exceed 10 dBm in any 1 MHz band.| |**Unwanted Emission**<br>**Limits**|For transmitters with operating frequencies in the band 5 150 MHz to<br>5 250 MHz, all emissions outside the band 5 150 MHz to 5 350 MHz shall not<br>exceed -27 dBm/MHz e.i.r.p. Any unwanted emissions that fall into the band<br>5 250 MHz to 5 350 MHz shall be attenuated below the channel power by at<br>least 26 dB, when measured using a resolution bandwidth between 1 % and<br>5 % of the occupied bandwidth (i.e. 99 % bandwidth), above 5 250 MHz. The<br>26 dB bandwidth may fall into the 5 250 MHz to 5 350 MHz band; if the<br>occupied bandwidth also falls within the 5 250 MHz to 5 350 MHz band, the<br>transmission is considered as intentional and the devices shall comply with all<br>requirements in the band 5 250 MHz to 5 350 MHz including implementing<br>dynamic frequency selection (DFS) and TPC, on the portion of the emission<br>that resides in the 5 250 MHz to 5 350 MHz band.| |**Complied Module M/N**|ENWF9203A1EF, ENWF9208A1EF| Product Specification Rev. 1.3 Page 80 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic ## 6 Regulatory and Certification Information |**RSS-247 Section**|6.2.2| |---|---| |**Frequency Band (MHz)**|5 250 to 5 350| |**Device Type **|For devices, other than devices installed in vehicles.| |**Devices out of Scope**|OEM devices installed in vehicles, Outdoor fixed devices, and other devices| ||having an e.i.r.p. grater than 200 mW.| ||ENWF9208A1EF (frequency band not supported) Channel Tables based| ||on RegulatoryDomain/Country| |**Power Limits**|The maximum conducted output power shall not exceed 250 mW or| ||11+10 log10B, dBm, whichever is less. The power spectral density shall not| ||exceed 11 dBm in any 1 MHz band.| |**Unwanted Emission**|All emissions outside the band 5 250 MHz to 5 350 MHz shall not| |**Limits**|exceed -27 dBm/MHz e.i.r.p.; or:| ||All emissions outside the band 5 150 MHz to 5 350 MHz shall not| ||exceed -27 dBm/MHz e.i.r.p. and its power shall comply with the spectral| ||power density for operation within the band 5 150 MHz to 5 250 MHz. The| ||device shall be labelled or include in the user manual the following text “For| ||indoor use only.”.| ||| |**RSS-247 Section**|6.2.3| |**Frequency Band (MHz)**|5 470 to 5 600 and 5 650 to 5 725| |**Device Type**|Devices shall not be capable of transmitting in the band 5 600 MHz to| ||5 650 MHz. This restriction is for the protection of Environment Canada’s| ||weather radars operatingin this band.| |**Devices out of Scope**|ENWF9208A1EF (frequency band not supported) Channel Tables based| ||on Regulatory Domain/Country| |**Power Limits**|The maximum conducted output power shall not exceed 250 mW or| ||11+10 log10B, dBm, whichever is less. The power spectral density shall not| ||exceed 11 dBm in any 1 MHz band.| |**Unwanted Emission**|Emissions outside the band 5 470 MHz to 5 725 MHz shall not| |**Limits**|exceed -27 dBm/MHz e.i.r.p. Devices with bandwidth overlapping the band| ||edge of 5 725 MHz can meet the emission limit of -27 dBm/MHz e.i.r.p. at| ||5 850 MHz instead of 5 725 MHz.| |**Complied Module M/N**|ENWF9203A1EF| Product Specification Rev. 1.3 Page 81 of 89 - - > PAN9026 Wi-Fi/Bluetooth Module ## Panasonic ## 6 Regulatory and Certification Information **==> picture [424 x 237] intentionally omitted <==** **----- Start of picture text -----**<br> ||| |---|---| |RSS-247 Section|6.2.4| |Frequency Band (MHz)|5 725 to 5 850| |Device Type|For equipment operating in the band 5 725 MHz to 5 850 MHz| |Devices out of Scope|Fixed point-to-point devices and devices with antenna gain greater than 6 dBi.| |Power Limits|The minimum 6 dB bandwidth shall be at least 500 kHz. The maximum| |conducted output power shall not exceed 1 W. The output power spectral| |density shall not exceed 30 dBm in any 500 kHz band.| |Unwanted Emission|Devices shall have e.i.r.p. of unwanted emissions comply with the following:| |Limits| |•|[27 dBm/MHz at frequencies from the band edges decreasing linearly to ]| |15.6 dBm/MHz at 5 MHz above or below the band edges| |•|[15.6 dBm/MHz at 5 MHz above or below the band edges decreasing linearly ]| |to 10 dBm/MHz at 25 MHz above or below the band edges| |•|[10 dBm/MHz at 25 MHz above or below the band edges decreasing linearly ]| |to -27 dBm/MHz at 75 MHz above or below the band edges| |•|[-27 dBm/MHz at frequencies more than 75 MHz above or below the band ]| |edges| |Complied Module M/N|ENWF9203A1EF, ENWF9208A1EF| **----- End of picture text -----**<br> @ For further information about module variants and its supported channel table please refer to Channel Tables based on Regulatory Domain/Country. ## **6.2.2 IC Notice** ## **English** The device PAN9026 ( 7.1 Ordering Information), including the antennas ( 6.1.5 Approved Antenna List), complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Product Specification Rev. 1.3 Page 82 of 89 6 Regulatory and Certification Information PAN9026 Wi-Fi/Bluetooth Module ## **French** © Le présent appareil PAN9026 ( 7.1 Ordering Information), les antennes y compris ( 6.1.5 Approved Antenna List), est conforme aux CNR-Gen d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. L'appareil ne doit pas produire de brouillage, et 2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ## **6.2.3 Labeling Requirements** ## **English** © ## **Labeling Requirements** The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is **IC: 216Q-9026** . This IC identifier is valid for all PAN9026 modules 7.1 Ordering Information. In any case, the end product must be labelled on the exterior with: "Contains IC: 216Q-9026”. ## **French** ## **Obligations d’étiquetage** Les fabricants d’équipements d’origine (FEO) – en anglais Original Equipment Manufacturer (OEM) – doivent s’assurer que les obligations d’étiquetage IC du produit final sont remplies. Ces obligations incluent une étiquette clairement visible à l’extérieur de l’emballage externe, comportant l’identifiant IC du module Panasonic inclus, ainsi que la notification ci-dessus. L’ identifiant IC est **IC: 216Q-9026** . Cet identifiant est valide pour tous les modules PAN9026 7.1 Ordering Information. Dans tous les cas les produits finaux doivent indiquer sur leur emballage externe la mention suivante: "Contient IC: 216Q-9026”. Product Specification Rev. 1.3 Page 83 of 89 > 6 Regulatory and Certification Information Panasonic PAN9026 Wi-Fi/Bluetooth Module - - > ## **6.3 European Conformity According to RED (2014/53/EU)** All modules described in this Product Specification comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles: 3.1a Safety/Health: EN 62368-1:2014 EN 62311:2008 3.1b EMC: EN 301 489-1 V2.1.1:2017-02 EN 301 489-17 V3.1.1:2017-02 3.2 Radio: EN 300 328 V2.2.2:2019-07 EN 301 893 V2.1.1:2017-05 EN 300 440 V2.1.1:2017-03 As a result of the conformity assessment procedure described in 2014/53/EU Directive, the end customer equipment should be labelled as follows: The end customer has to assure that the device has a distance of more than 20 cm from the human body under all circumstances. The end customer equipment must meet the actual Safety/Health requirements according to RED. PAN9026 and its model versions in the specified reference design can be used in all countries of the European Economic Area (Member States of the EU, European Free Trade Association States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra, and Turkey. ## **6.3.1 Radio Equipment Directive** The Radio Equipment Directive 2014/53/EU (RED) establishes a regulatory framework for placing radio equipment on the market. It ensures a Single Market for radio equipment by setting essential requirements for safety and health, electromagnetic compatibility, and the efficient use of the radio spectrum. The RED aligned the previous Directive, the Radio and Telecommunication Terminal Equipment Directive 1999/5/EC (R&TTED), with the new legislative framework for the marketing of products. The RED is applicable as of 2016-06-13. It included a one-year transitional period, which ended on 2017-06-12 (Article 48). On 2017-06-20, the Commission Implementing Regulation (EU) 2017/1354 was adopted. This specifies how to present the information provided for in Article 10(10) of Directive 2014/53/EU. Product Specification Rev. 1.3 Page 84 of 89 > PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information ## INDUSTRY Panasonic ## **Article 10(10) RED** In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment. The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45(2). - **Class 1:** Radio equipment that can be operated without any restriction in EU, EEA, and EFTA. According to Article 8(1)b of the RED, it is clarified that no national radio interfaces specifications are required to be notified under RED; - **Class 2:** Radio equipment subject to restrictions in one or more EU, EEA and EFTA countries where: - The technical parameters are not harmonised through EU, EEA, and EFTA; - The technical parameters are harmonised through EU, EEA and EFTA, and do not fall in above class 1 definition. Radio equipment class means a class identifying particular categories of radio equipment which, under this Directive, are considered similar and those radio interfaces for which the radio equipment is designed. ## **Article 8 RED** Notification of radio interface specifications and assignment of radio equipment classes 1: - 1) Member States shall notify, in accordance with the procedure set out in Directive 98/34/EC, the radio interfaces which they intend to regulate except: - a) The radio interfaces which fully and without any deviation comply with the Commission decisions on the harmonised use of radio spectrum adopted pursuant to Decision No. 676/2002/EC; and - b) The radio interfaces which, in accordance with implementing acts adopted pursuant to paragraph 2 of this Article, correspond to radio equipment which can be put into service and used without restrictions within the Union. - 2) The Commission shall adopt implementing acts establishing the equivalence between notified radio interfaces and assigning a radio equipment class, details of which shall be published in the Official Journal of the European Union. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 45(3). The Radio Interface Specifications Templates are provided for information in the EFIS database for applications which use is in harmonised radio spectrum, however with restrictions. Product Specification Rev. 1.3 Page 85 of 89 > PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information ## INDUSTRY Panasonic ## **6.3.2 Equipment Classes** The PAN9026 is a radio module classified as class-1 or class-2 radio equipment depending on the frequency band in which it can operate. This equipment class is passed on the end-product which integrates the module. ## **Class 1** Class 1 radio equipment can be placed on the market and put into service without restrictions according to Article 1(3) of Commission Decision 2000/299/EC (Version 2018-01). This radio module is defined as Class 1 radio equipment when it is restricted to operate in the following frequency bands: |**Sub-class**<br>**of Class 1**|**Application/Reference**|**Frequency Band**<br>**(MHz)**|**Transmit Power/Power Density**| |---|---|---|---| |22 Wideband Data|22 Wideband Data<br>Transmission Systems<br>EN 300 328|2 400 to 2 483.5|100 mW e.i.r.p and 100 mW/100 kHz<br>e.i.r.p. density applies when frequency<br>hopping modulation is used, 10 mW/MHz<br>e.i.r.p. density applies when other types of<br>modulation are used.| |54 Wireless Access Systems|54 Wireless Access Systems<br>including Radio Local Area<br>Networks (WAS/RLANs)<br>EN 301 893|5 470 to 5 725|1 W mean e.i.r.p., 50 mW/MHz mean<br>e.i.r.p. density in any 1 MHz band.| |43 Non-Specific Short Range|43 Non-Specific Short Range<br>Devices<br>EN 300 440|5 725 to 5 875|25 mW e.i.r.p.| ## **Class 2** Class 2 radio equipment are restricted in accordance with Article 1(3) of Commission Decision 2000/299/EC1 if the equipment falls within the scope of Class 2. The usage of PAN9026 module in a vehicular environment cannot be considered as **indoor use** . This radio module is also defined as Class 2 radio equipment when it is restricted to operate in the following frequency bands: |**Sub-class**<br>**of Class 2**|**Application/Reference**|**Frequency Band**<br>**(MHz)**|**Transmit Power/Power Density**| |---|---|---|---| |H01 Wireless Access Systems|H01 Wireless Access Systems<br>including Radio Local Area<br>Networks (WAS/RLANs)<br>**Restricted to indoor use**<br>EN 301 893|5 150 to 5 350|Max. 200 mW mean e.i.r.p. and max.<br>10 mW/MHz mean e.i.r.p. density in any<br>1 MHz band.| Product Specification Rev. 1.3 Page 86 of 89 6 Regulatory and Certification Information PAN9026 Wi-Fi/Bluetooth Module **==> picture [4 x 1] intentionally omitted <==** **----- Start of picture text -----**<br> <br>**----- End of picture text -----**<br> ## **6.4 Bluetooth** The final Bluetooth end product listing needs to be created by using the following IDs: |**Bluetooth**<br>**Product**|**Project**<br>**Name**|**Power Class**|**Power Class**|**Model**|**Declaration ID**|**QDID**| |---|---|---|---|---|---|---| |||**BR/EDR**|**LE**|||| |Controller<br>Subsystem|PAN9026 Class I|1|1.5 ENWF920xA1EF D044188|1.5 ENWF920xA1EF D044188|1.5 ENWF920xA1EF D044188|128779| ||PAN9026 Class II|2|2||D044187|129672| If the module is combined with a host stack that is Bluetooth qualified as "Host Subsystem" it is possible to list an “End Product” without any further qualification tests. The OpenSynergy Bluetooth software is commercially available and is delivered in source code format. Applications that are built using the Blue SDK are executed in Linux user space making development easy. The stack software and profiles are qualified components and are listed on the Bluetooth SIG website. - Blue SDK v6.x and Low Energy SDK v3.x: QDID 120439 - Bluetooth traditional profiles: QDID 117748 ## **Bluetooth Marks** According to the Bluetooth SIG, the PAN9026 fulfills the criteria to label your product as a Bluetooth device: For further information please refer to the Bluetooth website www.bluetooth.com. ## **6.5 RoHS and REACH Declaration** The latest declaration of environmental compatibility (Restriction of Hazardous Substances, RoHS and Registration, Evaluation, Authorisation and Restriction of Chemicals, REACH) for supplied products can be found on the Panasonic website in the “Downloads” section of the respective product 7.2.2 Product Information. Product Specification Rev. 1.3 Page 87 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 7 Appendix ## **7 Appendix** ## **7.1 Ordering Information** ## **Variants and Versions** |**Order Number**|**Brand (Version)**|**Description**|**MOQ22**| |---|---|---|---| |ENWF9201A1EF|PAN9026 (US)|Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n<br>Bluetooth/LE 5 with a ceramic chip-antenna, US version23|1 000| |ENWF9202A1EF|PAN9026 (EU)|Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n<br>Bluetooth/LE 5 with a ceramic chip-antenna, EU version24|1 000| |ENWF9203A1EF|PAN9026 (CA)|Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n<br>Bluetooth/LE 5 with a ceramic chip-antenna, CA version25|1 000| |ENWF9208A1EF|PAN9026 (MR)|Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n<br>Bluetooth/LE 5 with a ceramic chip-antenna, multi-region<br>version certified for US, EU, and CA26|1 000| |ENWF9209A1EF|PAN9026 (WW)|Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n<br>Bluetooth/LE 5 with a ceramic chip-antenna, non-certifified<br>world-wide version27|1 000| |ENWF9201AZEF|PAN9026-ETU|PAN9026 SDIO Adapter with module ENWF9201A1EF|1| |ENWF9201AYEF|PAN9026-KIT|PAN9026 Kit: 2× PAN9026 SDIO adapter with module<br>ENWF9201A1EF and 1× case|1| |ENWF9201AXEF|PAN9026-IMX|i.MX6+PAN9026 Development Kit: 1× PAN9026 MicroSD<br>Adapter, 1× Wandboard WBIMX6U, 1× MicroSD card, 1×<br>Adapter cable USB-A to DC 5.5/2.5 mmplug|1| |ENWF9201AWEF|PAN9026-MSD|PAN9026 MicroSD Adapter with module ENWF9201A1EF|1| |ENWF9201AVEF|PAN9026-MSDU|PAN9026 MicroSD and HS-UART Adapter with module<br>ENWF9201A1EF|1| - 22 Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1 000 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels. - 23 The US version is restricted to FCC regulatory domain with blocked country code and Tx power table. The device does not support the channels 12 to 13 in the 2.4 GHz band and any non-US channels. TPC, DFS, and passive scanning mechanism are set by the regulatory domain’s channel table, which is stored on the OTP memory of device. - 24 The EU version is restricted to European regulatory domain ETSI with blocked country code and Tx power table. TPC, DFS, and passive scanning mechanism are set by the regulatory domain’s channel table, which is stored on the OTP memory of device. - 25 The CA version is restricted to Canadian regulatory domain ISED with blocked country code and Tx power table. The device does not support the channels 12 to 13 in the 2.4 GHz band and any non-CA channels. TPC, DFS, and passive scanning mechanism are set by the regulatory domain’s channel table, which is stored on the OTP memory of device. - 26 The multi-region version is restricted to FCC, European ETSI, and Canadian ISED regulatory domain with blocked Tx power table, which is stored on the OTP memory of device. The device does not support the channels 12 to 13 in the 2.4 GHz band. DFS and passive scanning mechanism are not necessary as only the non-DFS channels in the 5 GHz band are supported. - 27 The world-wide version is a non-certified variant. Regulatory domain based settings like country code, Tx power, non-usable channels, TPC, DFS, and passive scanning are controlled by the CRDA application on host system. It is necessary to implement a Geo-location mechanism on host platform. Product Specification Rev. 1.3 Page 88 of 89 > PAN9026 Wi-Fi/Bluetooth Module ## INDUSTRY Panasonic 7 Appendix ## **7.2 Contact Details** ## **7.2.1 Contact Us** Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the **EU** , visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in **North America** , visit the Panasonic website “Sales & Support” to find assistance near you at https://na.industrial.panasonic.com/distributors Please visit the **Panasonic Wireless Technical Forum** to submit a question at https://forum.na.industrial.panasonic.com ## **7.2.2 Product Information** Please refer to the Panasonic Wireless Connectivity website for further information on our products and related documents: For complete Panasonic product details in the **EU** , visit http://pideu.panasonic.de/products/wireless-modules.html For complete Panasonic product details in **North America** , visit http://www.panasonic.com/rfmodules Product Specification Rev. 1.3 Page 89 of 89
Updated at March 31, 2026
Panasonic Industry is a global leader in the design and manufacture of high-quality electronic components. Renowned for a commitment to continuous innovation, the company provides the essential building blocks that empower modern engineering. From industrial automation to consumer electronics, Panasonic's components are trusted worldwide for their outstanding reliability, efficiency, and long-term performance. The extensive portfolio is anchored by a massive selection of passive components, featuring an industry-leading range of aluminium electrolytic, film, and polymer capacitors. Alongside these advanced capacitance solutions, engineers rely on Panasonic's robust power inductors and a highly versatile array of electromechanical devices, including solid-state, power, and signal relays engineered to excel in demanding environments. Beyond core passives and switching solutions, the offering encompasses critical circuit protection devices such as TVS varistors and NTC thermistors, as well as sophisticated thermal management materials. Panasonic also delivers precision light and motion sensors, highly reliable batteries, and advanced Bluetooth and WLAN connectivity modules, providing a comprehensive ecosystem of components to support next-generation technological design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →