Image not available
Illustrative purposes only
ENW89837A3KF
PAN1026 Class 2 Bluetooth® v4.0 Module
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PANASONIC
- Product type: Bluetooth Modules & Adaptors
- Data Rate: 3Mbps
- Bluetooth Class: Class 2
- Bluetooth Version: Bluetooth 2.1 + EDR, 3.0, 4.0
- Supply Voltage Max: 3.6V
- Supply Voltage Min: 1.7V
- Receive Sensitivity: -88dBm
- Operating Temperature Max: 85°C
- Operating Temperature Min: -40°C
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 7.14 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||||PAGE<br>1 of 35||| |CUSTOMER’S CODE<br>PAN1026||PANASONIC’S CODE<br>ENW89837AxKF||DATE<br>16.06.2017||| |A<br>H<br>A<br>S<br>S<br>B<br>a<br>t<br>i<br>©<br>A<br>T|Product Specification<br>pplicant/Manufacturer<br>ardware<br>Panasonic Industrial Devices Europe GmbH<br>Zeppelinstrasse 19<br>21337 Lüneburg<br>Germany<br>pplicant/Manufacturer<br>oftware<br>TOSHIBA Electronics Europe GmbH<br>Hansaallee 181<br>40549 Düsseldorf<br>Germany<br>oftware Version<br>Please refer to chapter 20/22<br>y purchase of any of the products described in this document the customer accepts the document's validity<br>nd declares their agreement and understanding of its contents and recommendations. Panasonic reserves<br>he right to make changes as required at any time without notification. Please consult the most recently<br>ssued Product Specification before initiating or completing a design.<br>Panasonic Industrial Devices Europe GmbH 2017.<br>ll rights reserved.<br>his Product Specification does not lodge the claim to be complete and free of mistakes.|||||| ||Power Electronics R&D Center<br>Wireless Connectivity<br>||APPROVED<br>genehmigt|CHECKED<br>geprüft|DESIGNED<br>erstellt|| ||Panasonic Industrial Devices Europe GmbH|||||| |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||||PAGE<br>1 of 35||| |CUSTOMER’S CODE<br>PAN1026||PANASONIC’S CODE<br>ENW89837AxKF||DATE<br>16.06.2017||| |A<br>H<br>A<br>S<br>S<br>B<br>a<br>t<br>i<br>©<br>A<br>T|Product Specification<br>pplicant/Manufacturer<br>ardware<br>Panasonic Industrial Devices Europe GmbH<br>Zeppelinstrasse 19<br>21337 Lüneburg<br>Germany<br>pplicant/Manufacturer<br>oftware<br>TOSHIBA Electronics Europe GmbH<br>Hansaallee 181<br>40549 Düsseldorf<br>Germany<br>oftware Version<br>Please refer to chapter 20/22<br>y purchase of any of the products described in this document the customer accepts the document's validity<br>nd declares their agreement and understanding of its contents and recommendations. Panasonic reserves<br>he right to make changes as required at any time without notification. Please consult the most recently<br>ssued Product Specification before initiating or completing a design.<br>Panasonic Industrial Devices Europe GmbH 2017.<br>ll rights reserved.<br>his Product Specification does not lodge the claim to be complete and free of mistakes.|||||| ||Power Electronics R&D Center<br>Wireless Connectivity<br>||APPROVED<br>genehmigt|CHECKED<br>geprüft|DESIGNED<br>erstellt|| ||Panasonic Industrial Devices Europe GmbH|||||| |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>2 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |TABLE OF CONTENTS<br>1<br>About this document....................................................................................................................... 4<br>1.1<br>Purpose .............................................................................................................................................. 4<br>1.2<br>Revision History ................................................................................................................................. 4<br>1.3<br>Related Documents ........................................................................................................................... 4<br>1.4<br>General Information ........................................................................................................................... 5<br>1.5<br>Contact Us ......................................................................................................................................... 6<br>2<br>Key Features .................................................................................................................................. 7<br>3<br>Applications for the Module ............................................................................................................ 7<br>4<br>Bluetooth Low Energy .................................................................................................................... 7<br>5<br>Description for the Module ............................................................................................................. 8<br>6<br>Detailed Description ....................................................................................................................... 8<br>6.1<br>PAN1026 Terminal Layout ................................................................................................................. 8<br>6.2<br>PAN1026 Terminal Description .......................................................................................................... 9<br>6.3<br>UART Interface ................................................................................................................................ 11<br>7<br>Bluetooth Features .......................................................................................................................14<br>8<br>Block Diagram ..............................................................................................................................14<br>9<br>Test Conditions ............................................................................................................................15<br>10<br>General Device Requirements and Operation .............................................................................15<br>10.1<br>Absolute Maximum Ratings ............................................................................................................. 15<br>10.2<br>Recommended Operating Conditions .............................................................................................. 15<br>10.3<br>Current Consumption ....................................................................................................................... 16<br>11<br>Bluetooth RF Performance ...........................................................................................................16<br>11.1<br>Bluetooth Characteristics ................................................................................................................. 16<br>12<br>Soldering Temperature-Time Profile (for reflow soldering) ..........................................................17<br>13<br>Module Dimension ........................................................................................................................18<br>14<br>PAN1026 FootPrint of the Module ...............................................................................................19<br>15<br>Case Marking ...............................................................................................................................20<br>15.1<br>Example for Marking ........................................................................................................................ 20<br>15.2<br>Marking Definition ............................................................................................................................ 20<br>16<br>Mechanical Requirements ............................................................................................................20<br>17<br>Reliability Tests ............................................................................................................................21<br>18<br>Cautions .......................................................................................................................................22<br>18.1<br>Design Notes ................................................................................................................................... 22<br>18.2<br>Installation Notes ............................................................................................................................. 22<br>18.3<br>Usage Conditions Notes .................................................................................................................. 23<br>18.4<br>Storage Notes .................................................................................................................................. 23<br>18.5<br>Safety Cautions ................................................................................................................................ 23<br>18.6<br>Other cautions .................................................................................................................................. 24<br>18.7<br>Life Support Policy ........................................................................................................................... 24<br>19<br>Packaging .....................................................................................................................................25<br>19.1<br>Tape Dimension ............................................................................................................................... 25<br>19.2<br>Packing in Tape ............................................................................................................................... 25<br>19.3<br>Component Direction ....................................................................................................................... 26<br>19.4<br>Reel Dimension ................................................................................................................................ 26|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>3 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |19.5<br>Label for Package ............................................................................................................................ 27<br>19.6<br>Total Package .................................................................................................................................. 27<br>20<br>Ordering Information ....................................................................................................................28<br>21<br>RoHS and REACH Declaration ....................................................................................................28<br>22<br>Software .......................................................................................................................................29<br>22.1<br>Software Description ........................................................................................................................ 29<br>22.2<br>Software Version Information ........................................................................................................... 29<br>22.3<br>Software block diagram.................................................................................................................... 30<br>23<br>Regulatory Information .................................................................................................................31<br>23.1<br>FCC for US ...................................................................................................................................... 31<br>23.2<br>Industry Canada Certification ........................................................................................................... 33<br>23.3<br>European Conformity according to RED (2014/53/EU) .................................................................... 34<br>23.4<br>Japanese Radio Law Compliance: ................................................................................................... 35<br>24<br>Bluetooth Qualification .................................................................................................................35|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>4 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**1**<br>**ABOUT THIS DOCUMENT**<br>**1.1 PURPOSE**<br>This Product Specification applies to Panasonic’s Class 2 Bluetooth®1classic and low energy dual<br>mode module, series number: PAN1026.<br>**1.2 REVISION HISTORY**<br>Revision<br>Date<br>Modification / Remarks<br>0.1<br>November 2012<br>1stpreliminary version.<br>0.2<br>January 2013<br>Update chapter 21 with the latest declaration.<br>Correct chapter 10.3 with the latest current values measured on the reference design.<br>Made the description forthe USBportsinchapter6.2 more precised.<br>0.3<br>October 2013<br>Editoral changes.<br>0.4<br>October 2013<br>Add IC notice in French.<br>0.5<br>December 2013<br>Added current consumption for BLE and LPM modes.<br>1.0<br>February 2014<br>Updated Bluetooth chapter and changed datasheet status.<br>1.1<br>March 2014<br>Corrected Pin Table with IO support.<br>1.2<br>June 2014<br>Corrected VCC voltage in Pin Table.<br>1.3<br>September 25,<br>2014<br>Added DoC.<br>1.4<br>May 2015<br>Added missing Bluetooth QDIDs to chapter**Fehler! Verweisquelle konnte nicht gefunden**<br>**werden.**.<br>1.5<br>January 2016<br>Added information about the C, L, R values below block diagram.<br>1.6<br>November 2016<br>Deleted low power supply voltage.<br>1.7<br>November 2016<br>Added MIC ID.<br>1.8<br>June 2017<br>Changed EU regulatory information for RED.<br>1.9<br>June 2017<br>Editorial changes.<br>**1.3 RELATED DOCUMENTS**<br>Please refer to the Panasonic Wireless Connectivity website for further information on our products and<br>related documents:<br>For complete Panasonic product details in the**EU**, visit<br>http://pideu.panasonic.de/products/wireless-modules.html<br>For complete Panasonic product details in**North America**, visit<br>http://www.panasonic.com/rfmodules<br>1Bluetooth is a registered trademark of the Bluetooth Special Interest Group.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>5 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**1.4 GENERAL INFORMATION**<br>This document may contain errors. Panasonic reserves the right to make corrections,<br>modifications, enhancements, improvements, and other changes to its literature at any time.<br>Customers should obtain the latest relevant information before placing orders and should verify<br>that such information is current and complete. All products are sold subject to Panasonic’s terms<br>and conditions of sale supplied at the time of order acknowledgment.<br>Engineering Samples (ES)<br>If Engineering Samples are delivered to the customer, these samples have the status “Engineering<br>Samples”. This means that the design of this product is not yet concluded. Engineering Samples may<br>be partially or fully functional, and they may differ from the published Product Specification.<br>Engineering Samples are not qualified and they are not to be used for reliability testing or series<br>production.<br>Disclaimer<br>The customer acknowledges that samples may deviate from the Product Specification and may bear<br>defects due to their status of development and the lack of qualification mentioned above.<br>Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic<br>disclaims liability for damages caused by:<br><br>The use of the Engineering Sample other than for evaluation purposes, particularly the<br>installation or integration in another product to be sold by the customer,<br><br>Deviation or lapse in function of the Engineering Sample,<br><br>Improper use of the Engineering Sample.<br>Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental<br>damages. In case of any queries regarding the Engineering Samples, please contact your local sales<br>partner or the related product manager.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>6 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**1.5 CONTACT US**<br>Please contact your local Panasonic Sales office for details on additional product options and<br>services:<br>For Panasonic Sales assistance in the**EU**, visit<br>https://eu.industrial.panasonic.com/about-us/contact-us<br>Email:wireless@eu.panasonic.com<br>For Panasonic Sales assistance in**North America**, visit the Panasonic Sales & Support Tool to find<br>assistance near you at<br>https://na.industrial.panasonic.com/distributors<br>Please visit the**Panasonic Wireless Technical Forum**to submit a question at<br>https://forum.na.industrial.panasonic.com<br>Please refer to the Panasonic Wireless Connectivity website for further information on our products<br>and related documents:<br>For complete Panasonic product details inthe**EU**, visit<br>http://pideu.panasonic.de/products/wireless-modules.html<br>For complete Panasonic product details in**North America**, visit<br>http://www.panasonic.com/rfmodules|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de No. REV. CLASSIFICATION PRODUCT SPECIFICATION ~~ee~~ DS-1026-2400-102 ~~ee~~ 1.9 CLASS 2 BLUETOOTH LOW ENERGY SUBJECT PAGE 7 of 35 ~~ee~~ SPP MODULE CUSTOMER’S CODE PANASONIC’S CODE DATE 16.06.2017 PAN1026 ENW89837AxKF ~~es ee~~ ## **2 KEY FEATURES** - Bluetooth Classic and BLE (Dual Mode) support - Bluetooth Classic 2.1 embedded SPP profile with high level API commands - Bluetooth 4.0 (LE) embedded GATT profile with high level API commands, compatible to Toshiba reference BLE profiles - Operational Temperature Range -40 / 85 degree C - Dimension 15.6mm x 8.7m x 1.9mm - Internal crystal oscillator (26MHz) - Integrated shielding to resist EMI - No external components needed - High sensitivity (-88 dBm typ.) - Tx power control up to a maximum of 4.0 dBm (typical) ## **3 APPLICATIONS FOR THE MODULE** All Embedded Wireless Applications - Access Points Proximity - Industrial Control Smart Phone - Medical Access Points Scanners - Temperature - Wireless Sensors Wellness - Low Power Sports ## **4 BLUETOOTH LOW ENERGY** Bluetooth Low Energy (BLE) is a part of Bluetooth Ver. 4.0, BT 4.0 covers both BLE as well as BT classic 2.1 and 3.0. If both are implemented in one device it is called dual mode. Dual mode chips implement the low energy specification,providing connectivity to coin cell battery applications. Dual mode combines low energy with the power of classic Bluetooth and are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones,computers or portable communication nodes. Bluetooth Low Energy (BLE) is not backwards compatible with previous Bluetooth classic standards (2.1+EDR or 3.0). Dual mode Bluetooth 4.0 is backwards compatible but is not practical for low power devices but targeted to gateway products PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~oo~~ No. REV. CLASSIFICATION PRODUCT SPECIFICATION ~~es~~ DS-1026-2400-102 1.9 CLASS 2 BLUETOOTH LOW ENERGY SUBJECT PAGE 8 of 35 ~~a~~ SPP MODULE CUSTOMER’S CODE PANASONIC’S CODE DATE 16.06.2017 PAN1026 ENW89837AxKF ~~es es~~ **5 DESCRIPTION OF THE MODULE** The PAN1026 is a short-range Class 2 BLE dual mode module for implementing Bluetooth functionality into various electronic devices. A block diagram can be found in chapter 8. ## **6 DETAILED DESCRIPTION** ## **6.1 PAN1026 TERMINAL LAYOUT** Top view, Application PCB ## 15.6 mm 5.0 1.0 0.6 1.2 2.4 __ 4 F1 F2 F3 F4 F5 F6 F7 F8 F9 F11 F12 bedooddsvodtec E1 E2 E3 E4 E5 E6 E7 E8 E9 ©C00000000 D1 D2 D3 D4 D5 D6 D7 D8 D9 CO000000004 C1 C2 C3 C4 C5 C6 C7 C8 C9 200000000, B1 B2 B3 B4 B5 B6 B7 B8 B9 ©CO00000000 A1 A2 A3 A4 A5 A6 A7 A8 A9 A11 A12 OooC000OO;, 0.6 OO PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~OO~~ |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE|||||||PAGE<br>9 of 35|| |CUSTOMER’S CODE<br>PAN1026||||PANASONIC’S CODE<br>ENW89837AxKF|||DATE<br>16.06.2017|| |**6.2 PAN1026 TERMINAL DESCRIPTION**<br>No<br>Pin Name<br>GPIO Number<br>Pin Type<br>A1<br>GND<br>Ground Pin<br>A2<br>NC<br>NC<br>A3<br>Reset<br>Digital Input<br>A4<br>VCC<br>Power<br>A5<br>VCC<br>Power<br>A6<br>VCC<br>Power<br>A7<br>GND<br>Ground Pin<br>A8<br>NC<br>NC<br>A9<br>GND<br>Ground Pin<br>A11<br>GND<br>Ground Pin<br>A12<br>GND<br>Ground Pin<br>B1<br>NC<br>NC<br>B2<br>BTS<br>GPIO 11<br>B3<br>BTA<br>GPIO 10<br>B4<br>NC<br>NC<br>B5<br>NC<br>NC<br>B6<br>NC<br>NC<br>B7<br>NC<br>NC<br>B8<br>NC<br>NC<br>B9<br>NC<br>NC<br>C1<br>CS0X<br>GPIO 17<br>C2<br>BTI<br>GPIO 13<br>C3<br>WIA<br>GPIO 12<br>C4<br>NC<br>NC<br>C5<br>NC<br>NC<br>C6<br>PCMCLK<br>GPIO 04<br>Digital I/O<br>C7<br>FSYNC<br>GPIO 05<br>Digital I/O<br>C8<br>GND<br>Ground Pin<br>C9<br>GND<br>Ground Pin<br>D1<br>CS1X<br>GPIO 18<br>D2<br>DIN<br>GPIO 16<br>D3<br>GPIO1<br>GPIO 01<br>Digital I/O<br>D4<br>USB*/GPIO0<br>Digital I/O<br>D5<br>NC<br>NC<br>D6<br>PCMIN<br>GPIO 03<br>Digital Input<br>D7<br>GND<br>Ground Pin<br>D8<br>GND<br>Ground Pin<br>D9<br>ANT<br>RF - Signal||||||Description<br>Connect to Ground<br>Not connected, leave open<br>Reset, active-low<br>analog/digital power supply connection<br>analog/digital power supply connection<br>analog/digital power supply connection<br>Connect to Ground<br>Not Connected<br>Connect to Ground<br>Connect to Ground<br>Connect to Ground<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>Not connected, leave open<br>PCM Clock<br>PCM Syncronisation<br>Connect to Ground<br>Connect to Ground<br>USB direct is not currently supported by the IC and therefore you<br>may use this pin as normal GPIO0.<br>When USB is supported the, pin will beSelect USB (Connect<br>toPIN E4)<br>Not connected, leave open<br>PCM In Not supported<br>Connect to Ground<br>Connect to Ground<br>Antenna Pin (Not connected for standard version)||| ||No|Pin Name|GPIO Number||Pin Type|Description||| ||A1|GND|||Ground Pin|Connect to Ground||| ||A2|NC|||NC|Not connected, leave open||| ||A3|Reset|||Digital Input|Reset, active-low||| ||A4|VCC|||Power|analog/digital power supply connection||| ||A5|VCC|||Power|analog/digital power supply connection||| ||A6|VCC|||Power|analog/digital power supply connection||| ||A7|GND|||Ground Pin|Connect to Ground||| ||A8|NC|||NC|Not Connected||| ||A9|GND|||Ground Pin|Connect to Ground||| ||A11|GND|||Ground Pin|Connect to Ground||| ||A12|GND|||Ground Pin|Connect to Ground||| ||B1|NC|||NC|Not connected, leave open||| ||B2|BTS|GPIO 11|||||| ||B3|BTA|GPIO 10|||||| ||B4|NC|||NC|Not connected, leave open||| ||B5|NC|||NC|Not connected, leave open||| ||B6|NC|||NC|Not connected, leave open||| ||B7|NC|||NC|Not connected, leave open||| ||B8|NC|||NC|Not connected, leave open||| ||B9|NC|||NC|Not connected, leave open||| ||C1|CS0X|GPIO 17|||||| ||C2|BTI|GPIO 13|||||| ||C3|WIA|GPIO 12|||||| ||C4|NC|||NC|Not connected, leave open||| ||C5|NC|||NC|Not connected, leave open||| ||C6|PCMCLK|GPIO 04||Digital I/O|PCM Clock||| ||C7|FSYNC|GPIO 05||Digital I/O|PCM Syncronisation||| ||C8|GND|||Ground Pin|Connect to Ground||| ||C9|GND|||Ground Pin|Connect to Ground||| ||D1|CS1X|GPIO 18|||||| ||D2|DIN|GPIO 16|||||| ||D3|GPIO1|GPIO 01||Digital I/O|||| ||D4|USB*/GPIO0|||Digital I/O|USB direct is not currently supported by the IC and therefore you<br>may use this pin as normal GPIO0.<br>When USB is supported the, pin will beSelect USB (Connect<br>toPIN E4)||| ||D5|NC|||NC|Not connected, leave open||| ||D6|PCMIN|GPIO 03||Digital Input|PCM In Not supported||| ||D7|GND|||Ground Pin|Connect to Ground||| ||D8|GND|||Ground Pin|Connect to Ground||| ||D9|ANT|||RF - Signal|Antenna Pin (Not connected for standard version)||| |||||||||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de||||||||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---|---|---|---| |SUBJECT||CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE|||||PAGE<br>10 of 35|| |CUSTOMER’S<br>PAN1026||CODE||PANASONIC’S CODE<br>ENW89837AxKF|||DATE<br>16.06.2017|| |||||||Description<br>I2C Interface (Only Internal) Connect to Testpin<br>I2C Interface (Only Internal) Connect to Testpin<br>USB direct is not currently supported by the IC therefore put this<br>pin to to GND.<br>IfUSB willbe supportedinthenextrevision, connect toVCC.<br>USB direct is not currently supported by the IC Leave this pin<br>open..<br>Whjen USB is supported the pin would beSelect USB<br>(Connect toPIN D4).<br>Active High once crystal frequency is stable<br>UART RXD<br>PCM Output Not supported<br>Connect to Ground<br>Connect to Ground<br>Connect to Ground<br>Internal EEPROM Write Protect (Active High)<br>USB direct is not currently supported by the IC therefore put this<br>pin to GND.<br>WhjenUSB is supported the pin would be USB DataIn/Out<br>USB direct is not currently supported by the IC therefore put this<br>pin to GND.<br>WhjenUSB is supported the pin would be USB DataIn/Out<br>UART CTS<br>Input Clock for 32.768KHz<br>UART TX<br>UART RTS<br>Connect to Ground<br>Connect to Ground<br>Connect to Ground||| ||No|Pin Name|GPIO Number||Pin Type|Description||| ||E1|SDA|GPIO 15||Digital I/O|I2C Interface (Only Internal) Connect to Testpin||| ||E2|SCL|GPIO 14||Digital I/O|I2C Interface (Only Internal) Connect to Testpin||| ||E3|VDD_USB|||Power|USB direct is not currently supported by the IC therefore put this<br>pin to to GND.<br>IfUSB willbe supportedinthenextrevision, connect toVCC.||| ||E4|USB*||||USB direct is not currently supported by the IC Leave this pin<br>open..<br>Whjen USB is supported the pin would beSelect USB<br>(Connect toPIN D4).||| ||E5|CLKREQ|||Digital Output|Active High once crystal frequency is stable||| ||E6|UART RXD|||Digital Input|UART RXD||| ||E7|PCMOUT|GPIO 02||Digital Output|PCM Output Not supported||| ||E8|GND|||Ground Pin|Connect to Ground||| ||E9|GND|||Ground Pin|Connect to Ground||| ||F1|GND|||Ground Pin|Connect to Ground||| ||F2|EEPROM_WP|||Digital Input|Internal EEPROM Write Protect (Active High)||| ||F3|USB_P|||Digital I/O|USB direct is not currently supported by the IC therefore put this<br>pin to GND.<br>WhjenUSB is supported the pin would be USB DataIn/Out||| ||F4|USB_M|||Digital I/O|USB direct is not currently supported by the IC therefore put this<br>pin to GND.<br>WhjenUSB is supported the pin would be USB DataIn/Out||| ||F5|UART CTS|||Digital Input|UART CTS||| ||F6|SLEEPCLK|||Digital Input|Input Clock for 32.768KHz||| ||F7|UARTTXD|||Digital Output|UART TX||| ||F8|UARTRTS|||Digital Output|UART RTS||| ||F9|GND|||Ground Pin|Connect to Ground||| ||F11|GND|||Ground Pin|Connect to Ground||| ||F12|GND|||Ground Pin|Connect to Ground||| |||||||||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de||||||||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>11 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**6.3 UART INTERFACE**<br>**6.3.1 Features**<br><br>Full-duplex 4-wire data transfer: RX, TX, RTS, CTS<br><br>Programmable baud rate: 2400bps to 4.33 Mbps<br><br>Data format (No parity bit): LSB first<br><br>Start bit (1-bit)<br><br>Data bit (8-bit):<br><br>Stop bit (1-bit)<br><br>Error detection: Character timeout, Overrun error, Framing error<br>TC35661 UART interface is used to transfer control command and data and is multiplexed with GPIO<br>pin. After the release reset state, TC35661 firmware sets UART interface mode to the related GPIO<br>pins. The default bit rate depends on the selection ROM version. (E.g. TC35661-501: 115,2kbps)<br>**6.3.2 Connection Example**<br>**UART connection example**<br>**Power-up sequence for UART configuration**<br>Reset<br>UART Transmit data<br>UART Receive data<br>UART Transmit flow control<br>Reset<br>GPIO Configuration<br>(Pulled-up/ input)<br>UART Communication<br>Output direction<br>Input direction<br>Output direction<br>Input direction<br>UART Receive flow<br>control<br>TC35661<br>UART Receive flow control (RTS)<br>UART Transmit flow control (CTS)<br>UART Receive data (RX)<br>UART Transmit data (TX)<br>**HOST CPU**|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>12 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**6.3.3 Frame Format**<br>TC35661 supporting format is as follows.<br><br>Number of data bits:<br>8 bits<br><br>Parity bit:<br>no parity<br><br>Stop bit:<br>1 stop bit<br><br>Flow control:<br>RTS/CTS<br>**UART data frame**<br>**6.3.4 Flow Control Function**<br>TC35661 UART interface uses flow control function by hardware signal, Transmit flow control<br>(CTSX) and receive flow control (RTSX). Above Figure shows signals input and output direction.<br>CTSX input signal is used for UART transmitting. Low input indicates close of the preparation of the<br>other party to receive data and TC35661 executes UART transmitting data if there is data for<br>transmission. In case of input high level, TC35661 stops transmitting by UART frame.<br>RTSX input signal is used for UART receiving. Low output indicates request data transmission to<br>UART transmit side device of the other party. TC35661 outputs Low level from RTSX when being<br>able to receive data and prepares to receive data.<br>Response time of UART transmitting and receiving for flow control signal depends on baud rate and<br>internal process status of frame. It is from 1 frame to 4 frames.<br>UART Transmit data<br>UART Transmit<br>flow control<br>1<br>LSB<br>2<br>3<br>4<br>5<br>6<br>MSB<br>Start bit<br>Stop bit<br>UART Receive data<br>UART Receive flow<br>control<br>1<br>LSB<br>2<br>3<br>4<br>5<br>6<br>MSB<br>Start bit<br>Stop bit<br>OverSampling (*12 to17) /bit<br>1<br>2<br>3<br>4<br>5<br>6<br>7<br>8<br>9<br>1|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>13 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**6.3.5 UART Baud Rate Setting**<br>TC35661 UART interface has a programmable baud rate setting function. The UART baud rate can<br>be set according to the following equation. The baud rate generating clock frequency is set to either<br>39 MHz or 52 MHz. The over-sampling number is set to an integer that ranges from 12 to 17. The<br>dividing ratio is set to an integer that ranges from 1 to 65,535.<br>_Ratio_<br>_Dividing_<br>_Number_<br>_Sampling_<br>_Over_<br>_Frequency_<br>_Clock_<br>_Generating_<br>_Rate_<br>_Baud_<br>_BaudRate_<br>_UART_<br><br><br>Table 6-1 shows examples of UART Baud rate setting. The maximum of the actual baud rate is<br>4,333,333 [bps]. If other target baud rates are required, please contact our engineering department.<br>**Table 6-1 UART Baud rate setting**<br>Target baud rate<br>[bps]<br>Actual baud rate<br>[bps]<br>Baud rate<br>generating<br>clock frequency<br>[MHz]<br>Over-sampling<br>number<br>Dividing ratio<br>Deviation<br>[%]<br>115,200<br>116,071<br>39<br>12<br>28<br>+0.7564<br>115,200<br>116,071<br>52<br>14<br>32<br>+0.7564<br>921,600<br>928,571<br>39<br>14<br>3<br>+0.7564<br>921,600<br>928,571<br>52<br>14<br>4<br>+0.7564<br>1,843,200<br>1,875,143<br>52<br>14<br>2<br>+0.7564<br>2,764,800<br>2,785,714<br>39<br>14<br>1<br>+0.7564<br>4,329,600<br>4,333,333<br>52<br>12<br>1<br>+0.0862<br>**6.3.6 Error Detect Function**<br>TC35661 UART interface has 3 kinds of error functions.<br><br>Receiver timeout error<br><br>Receiver over run error<br><br>Receiver frame error<br>Receiver timeout error reports as an error if the receiver frame interval counted by TC35661 internal<br>timer is equal to or greater than a predetermined time<br>Receiver over run error is reported if UART internal receive frame buffer TC35661 is overflowed.<br>Receiver frame error is reported if it fails to recognize the unit frame.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|14 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **7 BLUETOOTH FEATURES** - Bluetooth 4.0 with SPP & GATT - GAP support for SPP - GATT Server and Client Mode are supported for LE - Class 2 TX power w/o external PA, improving link robustness. - Excellent link budget (up to 91 dB), enabling long-range applications. - GAP peripheral support for LE ## Note: - For GAP Broadcaster and Peripheral role are supported - Observer and Central is not supported on GAP - For GATT Server and Client Mode are supported ## **8 BLOCK DIAGRAM** The total Capacitor value is 6.7µF +/-10%. The total Inductance is 2nH +/-10%. The total Resistance is 220kΩ +/-10%. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>15 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**9**<br>**TEST CONDITIONS**<br>Measurements shall be made under operating free-air temperature range unless otherwise specified.<br>Temperature<br>25 ± 10°C<br>Humidity<br>40 to 85%RH<br>Supply Voltage<br>3.3V<br>**10**<br>**GENERAL DEVICE REQUIREMENTS AND OPERATION**<br>All specifications are over temperature and process, unless indicated otherwise.<br>**10.1 ABSOLUTE MAXIMUM RATINGS**<br>No<br>See2<br>Value<br>Unit<br>Ratings Over Operating Free-Air Temperature Range<br>1<br>Voltage on any digital pin<br>-0.3 to<br>VDD+0.3<br>V<br>2<br>Operating ambient temperature range<br>-40 to 85<br>°C<br>3<br>Storage temperature range<br>-40 to 125<br>°C<br>4<br>Bluetooth RF inputs<br>10<br>dBm<br>5<br>ESD:<br>All pads, according to human-body model, JEDEC STD 22, method A114<br>According to charged-devicemodel, JEDEC STD 22,method C101<br>1000<br>500<br>V<br>**10.2 RECOMMENDED OPERATING CONDITIONS**<br>No<br>Rating<br>Min<br>Typ<br>Max<br>Unit<br>1<br>Power supply voltage<br>2.7<br>3.3<br>3.6<br>V<br>2<br>Maximum ambient operating temperature<br>-40<br>85<br>C<br>2Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the<br>device. These are stress ratings only and functional operation of the device at these or any other<br>conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to<br>absolute-maximum-rated conditions for extended periods may affect device reliability.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>16 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**10.3 CURRENT CONSUMPTION**<br>The current consumption is dependent on the user scenario and the setup and timing in the low power<br>modes.<br>Characteristics<br>Condition<br>Min<br>Typ<br>Max<br>Unit<br>Idle Current<br>After reset was pulled down.<br>7.8<br>mA<br>Connected Peak Power<br>Sending DH5 packets. Max. output<br>power.<br>62<br>mA<br>Connected Peak Power<br>Sending DH3 packets. Max. output<br>power.<br>61<br>mA<br>Connected Peak Power<br>Sending DH1 packets. Max. output<br>power.<br>55<br>mA<br>Sniff Mode<br>Sniff Interval =1280ms<br>Attempt=4 Timeout=0<br>0.18<br>mA<br>Sniff Mode<br>Sniff Interval =500ms<br>Attempt=4 Timeout=0<br>0.41<br>mA<br>Paging<br>PageScan interval=1280ms<br>window=11ms<br>0.33<br>mA<br>Inquiry<br>InquiryScan interval=1280ms<br>window=11ms<br>0.33<br>mA<br>BLE Advertising (1 Packet)<br>Advertising interval=30ms<br>5.8<br>mA<br>BLE Advertising (1 Packet)<br>Advertising interval=1280ms<br>0.165<br>mA<br>BLE Connected (1 Packet)<br>Connection interval=105ms<br>0.913<br>mA<br>BLE Connected (1 Packet)<br>Connection interval=1000ms<br>0.123<br>mA<br>**11**<br>**BLUETOOTH RF PERFORMANCE**<br>**11.1 BLUETOOTH CHARACTERISTICS**<br>No<br>Characteristics<br>Condition<br>Min<br>Typ<br>Max<br>BT Spec<br>Unit<br>1<br>Operation frequency range<br>2402<br>2480<br>MHz<br>2<br>Channel spacing<br>BT-Classic/BLE<br>1/2<br>MHz<br>3<br>Output Power<br>Maximum setting, measured at dual<br>ended 50ohm.<br>4<br>dBm<br>4<br>Sensitivity<br>-88<br>dBm<br>No<br>Characteristics<br>Condition<br>Typ<br>Max<br>Unit<br>1<br>Spurious emissions<br>Conducted measurement with a 50-Ω dual-ended load.<br>Complies with EN 300 328, EN 300 440 class 2, FCC<br>CFR47,Part15 andARIBSTD-T-66<br><-30<br>dBm|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|17 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **12 SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)** Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION |PRODUCT SPECIFICATION|PRODUCT SPECIFICATION| |---|---| CLASS 2 BLUETOOTH LOW ENERGY SUBJECT SPP MODULE CUSTOMER’S CODE PANASONIC’S CODE PAN1026 ENW89837AxKF |No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---| |PAGE|18 of 35|| |DATE|16.06.2017|| ## **13 MODULE DIMENSION** |No.|Item|Dimension|Tolerance|Remark| |---|---|---|---|---| |1|Width|8.70|0.20|| |2|Length|15.60|0.20|| |3|Height|1.80|0.20|With case| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de No. REV. CLASSIFICATION PRODUCT SPECIFICATION DS-1026-2400-102 1.9 ~~a~~ CLASS 2 BLUETOOTH LOW ENERGY SUBJECT PAGE 19 of 35 ~~ne~~ SPP MODULE CUSTOMER’S CODE PANASONIC’S CODE DATE 16.06.2017 PAN1026 ENW89837AxKF ~~es~~ ## **14 PAN1026 FOOTPRINT OF THE MODULE** All dimensions are in millimeters. The outer dimensions have a tolerance of 0.2mm. Top view, Application PCB 15.6 mm 5.0 1.0 0.6 1.2 2.4 _ F1 F2 F3 F4 F5 F6 F7 F8 F9 F11 F12 bedoodoos 00 E1 E2 E3 E4 E5 E6 E7 E8 E9 C00000000 D1 D2 D3 D4 D5 D6 D7 D8 D9 C000000004 C1 C2 C3 C4 C5 C6 C7 C8 C9 0000000004 B1 B2 B3 B4 B5 B6 B7 B8 B9 C0O0000000 A1 A2 A3 A4 A5 A6 A7 A8 A9 A11 A12 00000000;00 0.6 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~Too~~ |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|20 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **15 CASE MARKING** **==> picture [117 x 71] intentionally omitted <==** **----- Start of picture text -----**<br> 2<br>A<br>3<br>1<br>**----- End of picture text -----**<br> |No.|Remark| |---|---| |1|Marking for Pin 1 (Circle 0,15 mm)| |2|2D-Code, for internal usage only and<br>canbe changewithout anynotice| |3|Marking definition see chapter 15.1| ## **15.1 EXAMPLE FOR MARKING** |P<br>~~Pott~~|A<br>~~Pott~~|N<br>~~Potteae~~|1<br>~~eae~~|0<br>~~eae~~|2<br>~~eae~~|6<br>~~eae~~|~~eae~~<br>~~pt~~|~~eae~~<br>~~pt~~|H <br>~~eae~~<br>|W<br>~~eae~~<br>|/<br>~~eae~~<br>~~|~~|S <br>~~eae~~<br>~~||~~|W<br>~~eae~~<br>~~|~~|~~eae~~<br>~~|~~|~~eae~~<br>~~|~~|~~eae~~| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |E<br>~~Pott~~<br>~~pt~~|N <br>~~Pott~~<br>~~pt~~|W<br>~~Pott~~<br>|8<br><br>|9<br>|8<br>|3<br>|7<br><br>~~pt~~|A<br><br>~~pttt~~|3<br><br>~~tt~~|K<br><br>~~tt~~<br>~~|~~|F<br><br>~~|~~<br>~~**tt**~~|~~||~~<br>~~**tt**~~|~~|~~<br>~~**tt**tt~~|~~|~~<br>~~tt~~|~~|~~|| |Y<br>~~pt~~|Y <br>~~pttt~~|W <br>~~tt~~|W<br>~~tt~~<br>~~ft~~|D<br>~~ft~~<br>||L<br>~~tt~~|L<br>~~tt~~|~~pt~~<br>~~tttt~~|~~pttt~~<br>~~tt~~|~~tt~~<br>~~tttt~~|~~tt~~<br>~~|~~<br>~~tt~~|~~|~~<br>~~**tt**~~<br>~~tt~~|~~||~~<br>~~**tt**~~|~~|~~<br>~~**tt**tt~~|~~|~~<br>~~tt~~|~~|~~|| |F<br>~~pt~~|C<br>~~pttt~~|C<br>~~tt~~|I<br>~~tt~~<br>~~ft~~|D<br>~~ft~~<br>||:<br>~~tt~~|~~tt~~|T<br>~~pt~~<br>~~tttt~~|7<br>~~pt tt~~<br>~~tt~~|V<br>~~tt~~<br>~~tttt~~|P<br>~~tt~~<br>~~|~~<br>~~tt~~|A<br>~~|~~<br>~~**tt**~~<br>~~tt~~|N<br>~~| |~~<br>~~**tt**~~|1<br>~~|~~<br>~~**tt**tt~~|0<br>~~|~~<br>~~tt~~|~~|~~|| ## **15.2 MARKING DEFINITION** (1) Pin1 marking (2) 2D code (Serial number) (3) Marking: PAN1026 (Model Name), HW/SW (Hardware/Software version) ENW89837AxKF (Part Number, refer to chapter 20 Ordering Information) Lot code (YearYear, WeekWeek, Day, LotLot) ES (Engineering Sample marking) ## **16 MECHANICAL REQUIREMENTS** |No.|Item|Limit|Condition| |---|---|---|---| |1|Solderability|More than 75% of the soldering area shall be<br>coated by solder|Reflow soldering with<br>recommendable temperature profile| |2|Resistance to soldering<br>heat|It shall be satisfied electrical requirements and not<br>bemechanicaldamage|| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~nn~~ |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>21 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**17**<br>**RELIABILITY TESTS**<br>The measurement should be done after being exposed to room temperature and humidity for 1 hour.<br>No.<br>Item<br>Limit<br>Condition<br>1<br>Vibration test<br>Electrical parameter should be in<br>specification<br>a) Freq.:10~50Hz,Amplitude:1.5mm<br>a) 20min. / cycle,1hrs. each of XYZ axis<br>b) Freq.:30~100Hz, 6G<br>b)20min./ cycle,1hrs.eachof XYZaxis<br>2<br>Shock test<br>the same as above<br>Dropped onto hard wood from height of 50cm for 3 times<br>3<br>Heat cycle test<br>the same as above<br>-40°C for 30min. and +85°C for 30min.;<br>eachtemperature 300 cycles<br>4<br>Moisture test<br>the same as above<br>+60°C, 90% RH, 300h<br>5<br>Low temp. test<br>the same as above<br>-40°C, 300h<br>6<br>High temp. test<br>the same as above<br>+85°C, 300h|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>22 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**18**<br>**CAUTIONS**<br>Failure to follow the guidelines set forth in this document may result in degrading of the product’s<br>functions and damage to the product.<br>**18.1 DESIGN NOTES**<br>(1)<br>Follow the conditions written in this specification, especially the control signals of this<br>module.<br>(2)<br>The supply voltage has to be free of AC ripple voltage (for example from a battery or a<br>low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for<br>example a ferrite in series connection and a bypass capacitor to ground of at least 47uF<br>directly at the module).<br>(3)<br>This product should not be mechanically stressed when installed.<br>(4)<br>Keep this product away from heat. Heat is the major cause of decreasing the life of<br>these products.<br>(5)<br>Avoid assembly and use of the target equipment in conditions where the products'<br>temperature may exceed the maximum tolerance.<br>(6)<br>The supply voltage should not be exceedingly high or reversed. It should not carry noise<br>and/or spikes.<br>(7)<br>Keep this product away from other high frequency circuits.<br>**18.2 INSTALLATION NOTES**<br>(1)<br>Reflow soldering is possible twice based on the conditions in chapter 12.<br>Set up the temperature at the soldering portion of this product according to this reflow<br>profile.<br>(2)<br>Carefully position the products so that their heat will not burn into printed circuit boards or<br>affect the other components that are susceptible to heat.<br>(3)<br>Carefully locate these products so that their temperatures will not increase due to the<br>effects of heat generated by neighboring components.<br>(4)<br>If a vinyl-covered wire comes into contact with the products, then the cover will melt and<br>generate toxic gas, damaging the insulation. Never allow contact between the cover and<br>these products to occur.<br>(5)<br>This product should not be mechanically stressed or vibrated when reflowed.<br>(6)<br>If you want to repair your board by hand soldering, please keep the conditions of this<br>chapter.<br>(7)<br>Do not wash this product.<br>(8)<br>Refer to the recommended pattern when designing a board.<br>(9)<br>Pressing on parts of the metal cover or fastening objects to the metal will cause damage<br>to the unit.<br>(10)For more details on LGA (Land Grid Arrey) soldering processes refer to the application<br>note.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>23 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**18.3 USAGE CONDITIONS NOTES**<br>(1)<br>Take measures to protect the unit against static electricity.<br>If pulses or other transient loads (a large load applied in a short time) are applied to the<br>products, check and evaluate their operation befor assembly on the final products.<br>(2)<br>Do not use dropped products.<br>(3)<br>Do not touch, damage or soil the pins.<br>(4)<br>Follow the recommended condition ratings about the power supply applied to this<br>product.<br>(5)<br>Electrode peeling strength: Do not add pressure of more than 4.9N when soldered on<br>PCB.<br>(6)<br>Pressing on parts of the metal cover or fastening objects to the metal cover will cause<br>damage.<br>(7)<br>These products are intended for general purpose and standard use in general electronic<br>equipment, such as home appliances, office equipment, information and communication<br>equipment.<br>**18.4 STORAGE NOTES**<br>(1)<br>The module should not be stressed mechanically during storage.<br>(2)<br>Do not store these products in the following conditions or the performance characteristics<br>of the product, such as RF performance will be adversely affected:<br>Storage in salty air or in an environment with a high concentration of corrosive gas, such<br>as Cl2, H2S, NH3, SO2, or NOX<br>Storage in direct sunlight<br>Storage in an environment where the temperature may be outside the range of 5°C to<br>35°C range, or where the humidity may be outside the 45 to 85% range.<br>Storage of the products for more than one year after the date of delivery Storage period:<br>Please check the adhesive strength of the embossed tape and soldering after 6 months<br>of storage.<br>(3)<br>Keep this product away from water, poisonous gas and corrosive gas.<br>(4)<br>This product should not be stressed or shocked when transported.<br>(5)<br>Follow the specification when stacking packed crates (max. 10).<br>**18.5 SAFETY CAUTIONS**<br>These specifications are intended to preserve the quality assurance of products and<br>individual components.<br>Before use, check and evaluate the operation when mounted on your products. Abide by<br>these specifications, without deviation when using the products. These products may short-<br>circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated<br>when a short circuit occurs, then provide the following failsafe functions, as a minimum.<br>(1)<br>Ensure the safety of the whole system by installing a protection circuit and a protection<br>device.<br>(2)<br>Ensure the safety of the whole system by installing a redundant circuit or another system<br>to prevent a dual fault causing an unsafe status.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>24 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**18.6 OTHER CAUTIONS**<br>(1)<br>This specification sheet is copyrighted. Reproduction of this data sheets is permissible<br>only if reproduction is without alteration and is accompanied by all associated warranties,<br>conditions, limitations, and notices.<br>(2)<br>Do not use the products for other purposes than those listed.<br>(3)<br>Be sure to provide an appropriate fail-safe function on your product to prevent an<br>additional damage that may be caused by the abnormal function or the failure of the<br>product.<br>(4)<br>This product has been manufactured without any ozone chemical controlled under the<br>Montreal Protocol.<br>(5)<br>These products are not intended for other uses, other than under the special conditions<br>shown below. Before using these products under such special conditions, check their<br>performance and reliability under the said special conditions carefully to determine<br>whether or not they can be used in such a manner.<br>In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where<br>liquid may splash.<br>In direct sunlight, outdoors, or in a dusty environment<br>In an environment where condensation occurs.<br>In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2,<br>SO2, H2S, NH3, and NOX)<br>(6)<br>If an abnormal voltage is applied due to a problem occurring in other components or<br>circuits, replace these products with new products because they may not be able to<br>provide normal performance even if their electronic characteristics and appearances<br>appear satisfactory.<br>(7)<br>When you have any question or uncertainty, contact Panasonic.<br>**18.7 LIFE SUPPORT POLICY**<br>This Panasonic Industrial Devices Europe GmbH product is not designed for use in life support<br>appliances, devices, or systems where malfunction can reasonably be expected to result in a<br>significant personal injury to the user, or as a critical component in any life support device or<br>system whose failure to perform can be reasonably expected to cause the failure of the life<br>support device or system, or to affect its safety or effectiveness.<br>Panasonic customers using or selling these products for use in such applications do so at their<br>own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any<br>damages resulting.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|25 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **19 PACKAGING** If the product has mass production status, we will deliver the module in the package which is described below. ## **19.1 TAPE DIMENSION** ## **19.2 PACKING IN TAPE** **==> picture [346 x 152] intentionally omitted <==** **----- Start of picture text -----**<br> Direction of unreeling (for customer)<br>‘ } 4 4 || 4 @ 7 | 4 y /| + e 4 ¢ |<br>i) i| | Hl | |<br>Lo\\ cL) Rs\ Ba \\ \ |<br>UE aa NN wy Wr<br>rr as vO<br>trailer (empty) component leader (empty) Top cover tape more<br>1 x circumference / packed area minimum 10 pitch than 1 x<br>circumference plus<br>hub standard 100mm to avoid<br>(min 160mm) 1500pcs fixing of tape end on<br>sealed modules.<br>**----- End of picture text -----**<br> Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|26 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **19.3 COMPONENT DIRECTION** **==> picture [419 x 101] intentionally omitted <==** **----- Start of picture text -----**<br> || Pin 1 Marking<br>(Top Side)<br>| | Direction of } |<br>ae: |<br>unreeling EE‘ — ||<br>|<br>(for customer) L |||| Pin 1 Marking(Bottom Side)<br>: | Square Pin, all the<br>—_ > | others are round.<br>**----- End of picture text -----**<br> ## **19.4 REEL DIMENSION** PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|27 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **19.5 LABEL FOR PACKAGE** The picture shows an example from similar product. 105 mm BR Panasonic 4 Oe PAN1315 es |)NNN (1P): Customer Code (2P) ENW89818C2JF TT UDQM YM 0 A (9D): 0801 (Q): 1000 (HW/SW): 01/01 UV DNQQD NANO TMTN———LLEEI STLU MSL/Temp: 3/260 U1 AO DN AT EN es (1T) Lot code [YYWWDLL] Example from above: YY year printed 08 WW normal calendar week printed 01 D day printed 5 (Friday) L line identifier, if more as one printed 1 L lot identifier per day printed 1 (1P) Customer Order Code, if any, otherwise company name will be printed (2P) Panasonic Order Code: ENW89837AxKF (9D) Date code as [YYWW] (Q) Quantity [XXXX], variable max. 1500 (HW/SW) Hardware /Software Release Hardware 01 Indicates the HW revision. Software 01 Indicates the SW revision. ## **19.6 TOTAL PACKAGE** **==> picture [277 x 208] intentionally omitted <==** **----- Start of picture text -----**<br> moisture-sensitive print<br>(already exist on barrier bag) barcode<br>label<br>~<br>barrier bag<br>ia sealed a<br>desiccant 1) 2) _ K E S<br>moisture indicator<br>1) quantity of desiccant according<br> to calculation<br>Z a barcodelabel 2) optional: desiccant placed into the corner of the barrier bag Ng<br>~<br>inner carton box<br>size 340 x 340 x 41 mm³<br>**----- End of picture text -----**<br> PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|28 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| |**20**<br>**ORDERING INFORMATION**<br>Ordering part number<br>Description<br>MOQ(1)<br>ENW89837A3KF(2)<br>PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0.<br>115kBaud Standard<br>_Bluetooth_® smartready device<br>1500<br>ENW89837A8KF<br>PAN1026 CLASS 2 Bluetooth dual mode Module according BT-4.0.<br>9k6Baud<br>_Bluetooth_® smartready device<br>1500<br>Notes:<br>(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is<br>1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any<br>quantity via the distribution channels.<br>(2) Samples are available on customer demand<br>**21**<br>**ROHS AND REACH DECLARATION**<br>The latest declaration of environmental compatibility (RoHS and REACH) for supplied products can<br>be found on the Panasonic website in the “Downloads” section of the respective product.<br>Please also refer to chapter 1.3.||||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de||||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>29 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**22**<br>**SOFTWARE**<br>**22.1 SOFTWARE DESCRIPTION**<br>The module software offers both embedded Bluetooth HCI (Host Control Interface), extended HCI and<br>TCU (Toshiba Control Unit) Command interfaces via the embedded UART interface<br>a)<br>HCI commands are standard according to Bluetooth standard specifications.<br>b)<br>Extended HCI commands are available for device control, such as RF control, BD_ADDR control,<br>firmware version control, embedded IO control, maintenance tasks etc. Please refer to the<br>“Extension HCI Command Document”.<br>c)<br>The PAN1026 includes the Bluetooth LSI TC35661 incorporating Bluetooth stack and SPP profile<br>and BLE GATT profile. The profile application interface is described in the “SPP Command<br>Interface Document” (about 14 commands) and the “Bluetooth Basic Management Command<br>Interface Document” (about 46 commands). The related high level commands are called “TCU”<br>commands.<br>The “SPP Message Sequence Chart Document” and the “Bluetooth Management Message<br>Sequence Chart Document” describe the logical and sequential procedure to use those<br>commands.<br>d)<br>After RESET of the module, the module starts in HCI mode. The “Bluetooth LSI TC35661<br>Application Note” describes how to start the device and enter into “TCU” mode thereafter.<br>e)<br>The LSI Supplier (Toshiba) offers SPP drivers, that allows a further abstraction towards the<br>application software including SPP programming examples. This is documented in the “BT SPP<br>API Specification”, the ”BT SPP Driver Specification” and the “BT SPP Application Note”. The<br>“SPP API” offers a few high-level APIs for LSI initialization, connection setup and communication<br>with a remote SPP device. The user has full control over all LSI features by utilizing the lower-level<br>“SPP Drivers”. The drivers take care for issuing commands and data to the LSI and they handle<br>the responses from the TC36661. The “Application Note” includes a SPP programming example<br>and shows the integration with a RTOS.”<br>All documents are available on respective Panasonic or Toshiba websites.<br>**22.2 SOFTWARE VERSION INFORMATION**<br>The version number of the embedded software can be read out by an extended HCI command.<br>The extended HCI command class < HCI_M2_Message_Get >" allows the reading of the firmware<br>version. Pls refer to the extended HCI command list of TC35661 LSI.|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|30 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **22.3 SOFTWARE BLOCK DIAGRAM** PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de No. REV. CLASSIFICATION PRODUCT SPECIFICATION ~~ee~~ CLASS 2 BLUETOOTH LOW ENERGY DS-1026-2400-102 ~~ee ee~~ 1.9 SUBJECT PAGE 31 of 35 ~~ee~~ SPP MODULE CUSTOMER’S CODE PANASONIC’S CODE DATE 16.06.2017 PAN1026 ENW89837AxKF ~~eeee~~ **23 REGULATORY INFORMATION** ## **23.1 FCC FOR US** ## **23.1.1 FCC Notice** The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 23.1.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. ## **23.1.2 Caution** The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help ## **23.1.3 Labeling Requirements** The Original Equipment Manufacturer (OEM) must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is **FCC ID: T7VPAN10** . This FCC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In any case the end product must be labelled exterior with "Contains FCC ID: T7VPAN10" ## **23.1.4 Antenna Warning** For the related part number of PAN1026 refer to Chapter 20 - Ordering Information. This device is tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~OO~~ |CLASSIFICATION|PRODUCT SPECIFICATION|PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---|---|---| |SUBJECT|CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE|32 of 35|| |CUSTOMER’S CODE<br>PAN1026|CUSTOMER’S CODE|PANASONIC’S CODE<br>ENW89837AxKF|DATE|16.06.2017|| ## **23.1.5 Approved Antenna List** Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 1 LDA212G3110K Murata 2.4GHz Chip-Antenna +0.9 2 ANT2012LL13R2400A Yageo 2.4G Chip-Antenna +0.9 ~~re~~ ## **23.1.6 RF Exposure PAN1026** To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of PAN1026 with mounted ceramic antenna **(FCC ID: T7VPAN10)** is far below the FCC radio frequency exposure limits. Nevertheless, the PAN1026 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de |CLASSIFICATION<br>PRODUCT SPECIFICATION<br>No.<br>DS-1026-2400-102<br>REV.<br>1.9<br>SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE<br>PAGE<br>33 of 35<br>~~ee~~<br>~~ee ee~~<br>~~ee~~| |---| |CUSTOMER’S CODE<br>PAN1026<br>PANASONIC’S CODE<br>ENW89837AxKF<br>DATE<br>16.06.2017<br>~~ee~~<br>~~ee~~| |**23.2 INDUSTRY CANADA CERTIFICATION**| |PAN1026 is licensed to meet the regulatory requirements of Industry Canada (IC),| |license: IC: 216Q-PAN10| Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size the IC identifier is displayed in the installation instruction only and cannot be displayed on the modules label due to the limited size (8.7x15.6mm). ## **23.2.1 IC Notice** The devices PAN1026, for details refer to Chapter 20, including the antennas, which are listed in 23.1.5, complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. PAN1016 est garanti conforme aux dispositions règlementaires d’Industry Canada (IC), licences: **IC: 216Q-PAN10** Il est recommandé aux fabricants d’appareils fixes, mobiles ou portables de consulter la réglementation en vigueur et de vérifier la conformité de leurs produits relativement aux limites d’exposition aux rayonnements radiofréquence ainsi qu’au débit d’absorption spécifique maximum autorisé. Des informations pour les utilisateurs sur la réglementation Canadienne concernant l’exposition aux rayonnements RF sont disponibles sur le site www.ic.gc.ca. Ce produit a été développé pour fonctionner spécifiquement avec les antennes listées dans le tableau ci-dessus, présentant un gain maximum de 0.9dBi. Des antennes autres que celles listées ici, ou présentant un gain supérieur à 0.9dBi ne doivent en aucune circonstance être utilises en combinaison avec ce produit. L’impédance des antennes compatibles est 50Ohm. L’antenne utilisée avec ce produit ne doit ni être située à proximité d’une autre antenne ou d’un autre émetteur, ni être utilisée conjointement avec une autre antenne ou un autre émetteur. En raison de la taille du produit, l’identifiant IC est fourni dans le manuel d’installation. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~OO~~ |CLASSIFICATION<br>PRODUCT SPECIFICATION<br>No.<br>DS-1026-2400-102<br>REV.<br>1.9<br>SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE<br>PAGE<br>34 of 35<br>~~ee~~<br>~~ee ee~~<br>~~ee~~| |---| |CUSTOMER’S CODE<br>PAN1026<br>PANASONIC’S CODE<br>ENW89837AxKF<br>DATE<br>16.06.2017<br>~~ee~~<br>~~ee~~| |**23.2.2 Labeling Requirements**| |The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements are met.<br>This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate<br>Panasonic IC identifier for this product as well as the IC Notice above.<br>A| The IC identifier is **216Q-PAN10** . This IC identifier is valid for all PAN1026 modules, for details, see the Chapter 20 - Ordering Information. In any case the end product must be labelled exterior with "Contains **IC: 216Q-PAN10** " ## Obligations d’étiquetage Les fabricants d’équipements (OEM) doivent s’assurer que les obligations d’étiquetage du produit final sont remplies. Ces obligations incluent une étiquette clairement visible à l’extérieur de l’emballage externe, comportant l’identifiant IC du module Panasonic inclus, ainsi que la notification ci-dessus. Les identifiants IC sont: **IC: 216Q-PAN10** Ces identifiants sont valides pour tous les modules PAN1026 (Chapter 20. Ordering Information). Dans tous les cas les produits finaux doivent indiquer sur leur emballage externe une des mentions suivantes: " **Contient IC: 216Q-PAN10** ” ## **23.3 EUROPEAN CONFORMITY ACCORDING TO RED (2014/53/EU)** All modules described in this Product Specification comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with the RED (2014/53/EU) articles: 3.1a Safety/Health: EN60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013 EN62311:2008 3.1b EMC: EN 301 489-1 V2.1.1:2017-02 EN 301 489-17 V3.1.1:2017-02 3.2 Radio: EN 300 328 V2.1.1:2016-11 As a result of the conformity assessment procedure described in 2014/53/EU Directive, the end customer equipment should be labelled as follows: PAN1026 and its model versions in the specified reference design can be used in all countries of the European Economic Area (Member States of the EU, European Free Trade Association States[Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra and Turkey. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de ~~OO~~ |CLASSIFICATION<br>PRODUCT SPECIFICATION|CLASSIFICATION<br>PRODUCT SPECIFICATION|No.<br>DS-1026-2400-102|REV.<br>1.9| |---|---|---|---| |SUBJECT<br>CLASS 2 BLUETOOTH LOW ENERGY<br>SPP MODULE||PAGE<br>35 of 35|| |CUSTOMER’S CODE<br>PAN1026|PANASONIC’S CODE<br>ENW89837AxKF|DATE<br>16.06.2017|| |**23.4 JAPANESE RADIO LAW COMPLIANCE:**<br>This device is granted pursuant to the Japanese Radio Law (`電波法`).<br>This device should not be modified (otherwise the granted designation number will become invalid)<br>The following models are qualified for the Japanese market:<br>ENW89837AxKF<br>MIC ID: [R]202-LSE095<br>**24**<br>**BLUETOOTH QUALIFICATION**<br>Bluetooth End Products integrating PAN1026 need to be created by using following IDs:<br>**BT3.0:**<br>**Declaration ID**<br>**QDID**<br>Profile SubSystem (SDP/SPP)<br>B019234<br>36438<br>Controller Subsystem<br>B020093<br>40254<br>Host Subsystem<br>B019248<br>38386<br>**BT4.0:**<br>Profile Subsystem (Gatt)<br>B019935<br>40735<br>Controller Subsystem<br>B021165<br>48177<br>Host Subsystem<br>B020932<br>48566|||| |PANASONIC INDUSTRIAL DEVICES EUROPE GMBH<br>www.pideu.panasonic.de|||| PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de
Updated at February 9, 2023
Panasonic Industry is a global leader in the design and manufacture of high-quality electronic components. Renowned for a commitment to continuous innovation, the company provides the essential building blocks that empower modern engineering. From industrial automation to consumer electronics, Panasonic's components are trusted worldwide for their outstanding reliability, efficiency, and long-term performance. The extensive portfolio is anchored by a massive selection of passive components, featuring an industry-leading range of aluminium electrolytic, film, and polymer capacitors. Alongside these advanced capacitance solutions, engineers rely on Panasonic's robust power inductors and a highly versatile array of electromechanical devices, including solid-state, power, and signal relays engineered to excel in demanding environments. Beyond core passives and switching solutions, the offering encompasses critical circuit protection devices such as TVS varistors and NTC thermistors, as well as sophisticated thermal management materials. Panasonic also delivers precision light and motion sensors, highly reliable batteries, and advanced Bluetooth and WLAN connectivity modules, providing a comprehensive ecosystem of components to support next-generation technological design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →