Image not available
Illustrative purposes only
EKMH201VNN471MQ30T
ALUMINUM ELECTROLYTIC CAPACITOR 470UF, 2
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: UNITED CHEMI-CON
- Product type: Snap In / Screw Terminal Aluminium Electrolytic Capacitors
- ESR: 0.353ohm
- Polarity: Polar
- Capacitance: 470µF
- Voltage(DC): 200V
- Lead Spacing: 10mm
- Product Range: KMH Series
- Product Height: 30mm
- Product Diameter: 25.4mm
- Capacitor Terminals: Snap-In
- Capacitance Tolerance: ± 20%
- Lifetime @ Temperature: 2000 hours @ 105°C
- Operating Temperature Max: 105°C
- Operating Temperature Min: -25°C
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 2.2 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **KMH Series** ## **UPDATE** **Snap Mount Large Capacitance High CV High Ripple RoHS Compliant** **05 C Maximum Temperature** The KMH series capacitors are the standard 05 ° C high temperature, large capacitance snap-in capacitors that offer a wide voltage range of 6.3 to 450VDC. The endurance for the KMH series is 2,000 hours at 05 ° C with the rated ripple current applied. With very high CV values and high ripple current capabilities these capacitors are ideal for use in power supply filter circuits. All KMH series capacitors are RoHS compliant and available in a variety of sizes, with or without an end disk, and encased in a standard Pb-free PVC sleeve or an optional PET sleeve. The KMH capacitors are available with snap-in terminals (2 or 4-pin) depending on can diameter. Straight standoff terminals (5 pin) are optional for the 40mm can diameter. ## **Summary of Specifications** **PC board 2 or 4-pin snap-in; optional 5-pin (Ø40 only) straight standoff terminals. Capacitance range: 47 to 220,000µF.** **Voltage range: 6.3 to 450VDC.** **Category temperature range:** _ **40** ° **C to 05** ° **C for 6.3 to 100V;** _ **25** ° **C to 05** ° **C for 160 to 450V.** | **Leakage current: 0.02CV(µA) or 3mA, whichever is smaller, after 5 minutes at 0 C.** . **Standard capacitance tolerance:** + **20%** | **Nominal case size (D** x **L): 22** x **20mm to 40** x **80mm.** i| **Rated lifetime: 2,000 hours at 05** ° **C with the rated ripple current applied.** 18 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **KMH Specifications - Snap Mount** |**Item**||**Characteristics**| |---|---|---| |Category Temperature Range||�40 to�105�C for 6.3 to 100VDC;�25 to�105�C for 160 to 450VDC| |Rated Voltage Range||6.3 to 450VDC| |Capacitance Range||47 to 220,000�F| |Capacitance Tolerance||�20% (M) at�20�C, 120Hz| |Leakage Current||I�0.02CV (�A) or 3mA, whichever is smaller, after 5 minutes at�20�C.<br>Where I = Max. leakage current (�A), C = Nominal capacitance (�F) and V= Rated voltage (V)| |Dissipation Factor (Tan�)||At�20�C, 120Hz<br>*0.15 maximum for 35mm and 40mm diameter or 20mm in length.<br>**†**_For rated voltages_≤_63V, values are not valid for case sizes >35mm in diameter or >50mm in length._<br>Rated Voltage (V)<br>Tan�(DF) Max.**†**<br>6.3<br>0.60<br>10<br>0.50<br>16<br>0.40<br>25<br>0.30<br>35<br>0.25<br>50<br>0.20<br>63-100<br>0.15<br>160-250<br>*0.10*<br>315-450<br>0.15| |Low Temperature<br>Characteristics||At 120Hz, impedance (Z) ratio between the�25�C or�40�C value and�20�C value shall not<br>exceed the values given below.<br>Rated Voltage (V)<br>Z (�25�C) /Z (�20�C)<br>Z (�40�C) /Z (�20�C)<br>6.3-16<br>4<br>15<br>25<br>3<br>10<br>35<br>3<br>8<br>50, 63<br>2<br>6<br>80,100<br>2<br>5<br>160-400<br>4<br>—<br>450<br>8<br>—| |Rated Ripple Current Multipliers||Ambient Temperature (�C)<br>�45�C<br>2.64<br>�60�C<br>2.23<br>�70�C<br>2.12<br>�85�C<br>1.73<br>�105�C<br>1.00<br>Frequency (Hz)<br>DC Rated Voltage<br>6.3-50V<br>63-100V<br>160-250V<br>315-450V<br>50Hz<br>0.95<br>0.92<br>0.81<br>0.77<br>120Hz<br>1.00<br>1.00<br>1.00<br>1.00<br>300Hz<br>1.03<br>1.07<br>1.17<br>1.16<br>1kHz<br>1.05<br>1.13<br>1.32<br>1.30<br>10kHz<br>1.08<br>1.19<br>1.45<br>1.41<br>100kHz<br>1.08<br>1.20<br>1.50<br>1.43| |Endurance<br>(Load Life)||The following specifications shall be satisfied when the capacitors are restored to�20�C after<br>subjecting them to DC voltage for 2,000 hours at�105�C with the rated ripple current applied.<br>The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of<br>the capacitors.<br>Capacitance change:≤�20% of initial measured value<br>Tan�( DF )<br>:≤200% of initial specified value<br>Leakage current<br>:≤initial specified value| |Shelf Life||The following specifications shall be satisfied when the capacitors are restored to�20�C after<br>exposing them for 1,000 hours at�105�C without voltage applied. The rated voltage shall be<br>applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than<br>48 hours before the measurements.<br>Capacitance change:≤�20% of initial measured value<br>Tan�( DF )<br>:≤150% of initial specified value<br>Leakage current<br>:≤initial specified value| United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 19 ## **KMH Series** ## **Diagram of Dimensions - Snap Mount** ## **Snap Mount** ## **Snap Mount** **==> picture [29 x 7] intentionally omitted <==** **----- Start of picture text -----**<br> Unit: mm<br>**----- End of picture text -----**<br> **VSN Snap-in Ø22 and Ø35 standard VNN Snap-in Ø22 and Ø35 optional** **VND Snap-in Ø35 and Ø40 standard VSD Snap-in Ø35 and Ø40 optional** **==> picture [465 x 77] intentionally omitted <==** **----- Start of picture text -----**<br> *** [Brown Insulating Sleeve] Negative Mark PC Board Pin-out *** [Brown Insulating Sleeve] Negative Mark PC Board Pin-out<br> 30°<br>D�1 10 D�1 22.5<br>** [Vent] See 2-2x ** [Vent] See 2-4x<br>L�2 Pin L�2 Pin<br>Detail Detail<br>Insulating Disk Insulating Disk<br>B<br>A*<br>C*<br>**----- End of picture text -----**<br> ## **VEN Snap-in Ø30 and Ø35 optional** **==> picture [462 x 254] intentionally omitted <==** **----- Start of picture text -----**<br> *** [Brown Insulating Sleeve] Negative Mark PC Board Pin-out<br>3.3�0.1 Straight Pin Mount<br>4.75�0.1<br>D�1 10 VQT Straight Standoff Ø40 optional<br>** [Vent] L�2 SeePin Detail 2.5 MIN.-1x2-2x *** [Brown Insulating Sleeve] Negative Mark B* PC Board Pin-out 360 6 °<br>Insulating Disk<br>C<br>D�1 25<br>VS, VE & VN Snap-in Pin Dimensions<br>** [Vent] See D* 2-5x<br>L�2 Pin<br>W2 W1 Insulating Disk Detail<br>Edge<br>P of can<br>VQ Straight Standoff Pin Dimensions<br>W<br>W1 W<br>Type P W W1 W2 P Edge<br>VSN Ø22- Ø30 4.0�0.5 of can<br>VSN Ø35 3.5�0.5 P1<br>VNN Ø22- Ø35 5.8�1.0<br>1.5�0.2 0.8�0.1 0.8�0.1<br>VEN Ø30- Ø35 4.0�0.5<br>VSD Ø35- Ø40 3.5�1.0 Type P P1 W W1<br>VND Ø35- Ø40 5.8�1.0 Standoff Pin (VQ) 3.75�1.0 2.0 max. 1.5�0.1 0.7�0.2<br>A*<br>**----- End of picture text -----**<br> ## **CAUTION:** - Use the blank terminals for mechanical support only. The blank terminals must not be connected to a solder trace on the PC board but be electrically isolated from the negative and positive terminals. - ** The vent may be located either on the bottom or side of the can. - *** The brown sleeve with gray stripe negative pin indicator is standard. Also note in some cases, the sleeve color may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. 20 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** **Part Numbering System for KMH Series** When ordering, always specify complete 18-field global part number. |**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**|**Supplement Code.**Field 18.<br>All construction options listed have Sn100% terminal plating.<br>T = Pb-free PVC sleeve with end disk.<br>M = Pb-free PVC sleeve without end disk.<br>W= PET sleeve with end disk.<br>S = PET sleeve without end disk.<br>**Case Size.**Fields 15, 16 and 17.<br>The single letter diameter code is inserted in field 15.<br>P = Ø22mm<br>Q = Ø25.4mm<br>R = Ø30mm<br>A = Ø35mm<br>B = Ø40mm<br>The double digit length code is inserted in fields 16 and 17.<br>20 = 20mm<br>25 = 25mm<br>30 = 30mm<br>35 = 35mm<br>40 = 40mm<br>45 = 45mm<br>50 = 50mm<br>63 = 63mm<br>80 = 80mm<br>**Capacitance Tolerance.**Field 14.<br>M=�20%<br>**Capacitance.**Fields 11, 12 and 13.<br>Expressed in Microfarads. The first two digits are significant<br>figures inserted in fields 11 and 12, and the third digit inserted<br>in field 13 indicates the number of zeros for capacitance of<br>10�F or more. R indicates the decimal point for capacitance<br>less than 10�F (e.g. 5R6 = 5.6�F; 560 = 56�F; 561= 560�F;<br>562 = 5,600�F; 563 = 56,000�F ).<br>**Dummy Terminals.**Field 10.<br>N = No dummy terminals.<br>D = 2 dummy terminals.<br>T = 3 dummy terminals.<br>**Terminal Type.**Fields 8 and 9.<br>VS = Snap-in pins, 4.0mm in length, 3.5mm forØ35 only.<br>VN = Snap-in pins, 5.8mm in length.<br>VE = Snap-in pins, polarized,Ø30 orØ35 option.<br>VQ = Straight standoff pins.<br>**DC Rated Voltage.**Fields 5, 6 and 7.<br>Expressed in Volts. The first two digits are significant figures<br>inserted in fields 5 and 6, and the third digit inserted in field 7<br>indicates the number of zeros for rated voltage of 10VDC or<br>more. R indicates the decimal point for rated voltage less than<br>10VDC (e.g. 2R0 = 2.0VDC; 200 = 20VDC; 201 = 200VDC).<br>Rule Exception: Coding for rated voltage 315VDC = 3B1.<br>**Series Name.**Fields 2, 3 and 4.<br>Enter the 3-letter/digit series name in fields 2, 3 and 4. If the<br>series name is only 2 letters/digits, place a dash in field 4.<br>For a series name with more than 3 letters/digits, refer to the<br>individual series for the appropriate 3-field series name.<br>**Capacitor Type.**Field 1.<br>Aluminum Electrolytic Capacitor (Polar).<br>**E**<br>**K**<br>**M H**<br>**2**<br>**0 1**<br>**V S**<br>**N**<br>**5 6 1**<br>**M**<br>**P**<br>**4 5**<br>**T**<br>17<br>16<br>15<br>14<br>13<br>12<br>11<br>10<br>9<br>8<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>18<br>**9**<br>**8**<br>**7**<br>**6**<br>**5**<br>**4**<br>**3**<br>**2**<br>**1**<br>**18 Fields**| |---|---|---|---|---|---|---|---|---|---|---|---|---| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| |||||||||||||| United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 21 ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**6.3 Volts**<br>**8 Volts Surge**|12,000|EKMH6R3VSN123MP25T|22�25|P25|0.083|1.54| ||15,000|EKMH6R3VSN153MP25T|22�25|P25|0.066|1.72| ||18,000|EKMH6R3VSN183MP30T|22�30|P30|0.055|1.95| ||22,000|EKMH6R3VSN223MP35T|22�35|P35|0.045|2.23| ||27,000|EKMH6R3VSN273MP40T|22�40|P40|0.037|2.54| ||33,000|EKMH6R3VSN333MP45T|22�45|P45|0.03|2.88| ||18,000|EKMH6R3VSN183MQ25T|25.4�25|Q25|0.055|1.96| ||22,000|EKMH6R3VSN223MQ30T|25.4�30|Q30|0.045|2.25| ||27,000|EKMH6R3VSN273MQ35T|25.4�35|Q35|0.037|2.57| ||33,000|EKMH6R3VSN333MQ40T|25.4�40|Q40|0.03|2.93| ||39,000|EKMH6R3VSN393MQ40T|25.4�40|Q40|0.026|3.18| ||47,000|EKMH6R3VSN473MQ50T|25.4�50|Q50|0.021|3.69| ||22,000|EKMH6R3VSN223MR25T|30�25|R25|0.045|2.28| ||27,000|EKMH6R3VSN273MR25T|30�25|R25|0.037|2.52| ||33,000|EKMH6R3VSN333MR30T|30�30|R30|0.03|2.89| ||39,000|EKMH6R3VSN393MR35T|30�35|R35|0.026|3.26| ||47,000|EKMH6R3VSN473MR40T|30�40|R40|0.021|3.69| ||56,000|EKMH6R3VSN563MR45T|30�45|R45|0.018|4.16| ||68,000|EKMH6R3VSN683MR50T|30�50|R50|0.015|4.71| ||33,000|EKMH6R3VSN333MA25T|35�25|A25|0.03|2.93| ||39,000|EKMH6R3VSN393MA30T|35�30|A30|0.026|3.4| ||47,000|EKMH6R3VSN473MA30T|35�30|A30|0.021|3.73| ||56,000|EKMH6R3VSN563MA35T|35�35|A35|0.018|4.12| ||68,000|EKMH6R3VSN683MA40T|35�40|A40|0.015|4.69| ||82,000|EKMH6R3VSN823MA45T|35�45|A45|0.012|5.32| ||120,000|EKMH6R3VND124MA63T|35�63|A63|0.011|6.9| ||180,000|EKMH6R3VND184MA80T|35�80|A80|0.008|9.04| ||56,000|EKMH6R3VND563MB25T|40�25|B25|0.026|3.87| ||68,000|EKMH6R3VND683MB30T|40�30|B30|0.02|4.47| ||82,000|EKMH6R3VND823MB35T|40�35|B35|0.018|5.09| ||100,000|EKMH6R3VND104MB40T|40�40|B40|0.014|5.79| ||150,000|EKMH6R3VND154MB50T|40�50|B50|0.011|7.54| ||180,000|EKMH6R3VND184MB63T|40�63|B63|0.009|8.82| ||220,000|EKMH6R3VND224MB80T|40�80|B80|0.008|10.61| |||||||| |**10 Volts**<br>**13 Volts Surge**|10,000|EKMH100VSN103MP25T|22�25|P25|0.083|1.55| ||12,000|EKMH100VSN123MP30T|22�30|P30|0.069|1.77| ||15,000|EKMH100VSN153MP30T|22�30|P30|0.055|1.97| ||18,000|EKMH100VSN183MP35T|22�35|P35|0.046|2.21| ||22,000|EKMH100VSN223MP40T|22�40|P40|0.038|2.51| ||27,000|EKMH100VSN273MP50T|22�50|P50|0.031|2.93| ||15,000|EKMH100VSN153MQ25T|25.4�25|Q25|0.055|1.96| ||18,000|EKMH100VSN183MQ30T|25.4�30|Q30|0.046|2.23| ||22,000|EKMH100VSN223MQ35T|25.4�35|Q35|0.038|2.54| ||27,000|EKMH100VSN273MQ40T|25.4�40|Q40|0.031|2.9| ||33,000|EKMH100VSN333MQ45T|25.4�45|Q45|0.025|3.3| ||39,000|EKMH100VSN393MQ50T|25.4�50|Q50|0.021|3.68| ||22,000|EKMH100VSN223MR25T|30�25|R25|0.038|2.4| ||27,000|EKMH100VSN273MR30T|30�30|R30|0.031|2.87| ||33,000|EKMH100VSN333MR35T|30�35|R35|0.025|3.28| ||39,000|EKMH100VSN393MR40T|30�40|R40|0.021|3.69| ||47,000|EKMH100VSN473MR45T|30�45|R45|0.018|4.17| ||56,000|EKMH100VSN563MR50T|30�50|R50|0.015|4.68| ||27,000|EKMH100VSN273MA25T|35�25|A25|0.031|2.73| ||33,000|EKMH100VSN333MA30T|35�30|A30|0.025|3.16| ||39,000|EKMH100VSN393MA30T|35�30|A30|0.021|3.43| ||47,000|EKMH100VSN473MA35T|35�35|A35|0.018|3.76| ||56,000|EKMH100VSN563MA40T|35�40|A40|0.015|4.67| ||68,000|EKMH100VSN683MA50T|35�50|A50|0.012|5.46| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 22 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**10 Volts**<br>**13 Volts Surge**|100,000|EKMH100VND104MA63T|35�63|A63|0.011|6.9| ||120,000|EKMH100VND124MA80T|35�80|A80|0.009|8.08| ||39,000|EKMH100VND393MB25T|40�25|B25|0.027|3.54| ||56,000|EKMH100VND563MB30T|40�30|B30|0.021|4.44| ||68,000|EKMH100VND683MB35T|40�35|B35|0.018|5.08| ||82,000|EKMH100VND823MB40T|40�40|B40|0.015|5.75| ||120,000|EKMH100VND124MB50T|40�50|B50|0.012|7.39| ||150,000|EKMH100VND154MB63T|40�63|B63|0.009|8.82| ||180,000|EKMH100VND184MB80T|40�80|B80|0.008|10.51| |||||||| |**16 Volts**<br>**20 Volts Surge**|6,800|EKMH160VSN682MP25T|22�25|P25|0.098|1.57| ||10,000|EKMH160VSN103MP30T|22�30|P30|0.066|1.97| ||12,000|EKMH160VSN123MP35T|22�35|P35|0.055|2.22| ||15,000|EKMH160VSN153MP40T|22�40|P40|0.044|2.55| ||18,000|EKMH160VSN183MP45T|22�45|P45|0.037|2.87| ||10,000|EKMH160VSN103MQ25T|25.4�25|Q25|0.066|1.97| ||12,000|EKMH160VSN123MQ30T|25.4�30|Q30|0.055|2.24| ||15,000|EKMH160VSN153MQ35T|25.4�35|Q35|0.044|2.58| ||18,000|EKMH160VSN183MQ40T|25.4�40|Q40|0.037|2.92| ||22,000|EKMH160VSN223MQ45T|25.4�45|Q45|0.03|3.32| ||27,000|EKMH160VSN273MQ50T|25.4�50|Q50|0.025|3.78| ||12,000|EKMH160VSN123MR25T|30�25|R25|0.055|2.45| ||15,000|EKMH160VSN153MR25T|30�25|R25|0.044|2.52| ||18,000|EKMH160VSN183MR30T|30�30|R30|0.037|2.88| ||22,000|EKMH160VSN223MR35T|30�35|R35|0.03|3.29| ||27,000|EKMH160VSN273MR40T|30�40|R40|0.025|3.77| ||33,000|EKMH160VSN333MR45T|30�45|R45|0.02|4.3| ||39,000|EKMH160VSN393MR50T|30�50|R50|0.017|4.81| ||18,000|EKMH160VSN183MA25T|35�25|A25|0.037|2.92| ||22,000|EKMH160VSN223MA25T|35�25|A25|0.03|3.23| ||27,000|EKMH160VSN273MA30T|35�30|A30|0.025|3.45| ||33,000|EKMH160VSN333MA35T|35�35|A35|0.02|4.26| ||39,000|EKMH160VSN393MA40T|35�40|A40|0.017|4.79| ||47,000|EKMH160VSN473MA45T|35�45|A45|0.014|5.43| ||68,000|EKMH160VND683MA63T|35�63|A63|0.012|6.36| ||100,000|EKMH160VND104MA80T|35�80|A80|0.009|8.25| ||33,000|EKMH160VND333MB25T|40�25|B25|0.027|3.64| ||39,000|EKMH160VND333MB30T|40�30|B30|0.021|4.15| ||47,000|EKMH160VND333MB35T|40�35|B35|0.018|4.72| ||56,000|EKMH160VND333MB40T|40�40|B40|0.015|5.31| ||82,000|EKMH160VND333MB50T|40�50|B50|0.012|6.83| ||100,000|EKMH160VND333MB63T|40�63|B63|0.010|8.05| ||150,000|EKMH160VND333MB80T|40�80|B80|0.008|10.73| |||||||| |**25 Volts**<br>**32 Volts Surge**|4,700|EKMH250VSN472MP25T|22�25|P25|0.106|1.5| ||5,600|EKMH250VSN562MP25T|22�25|P25|0.089|1.63| ||6,800|EKMH250VSN682MP30T|22�30|P30|0.073|1.86| ||8,200|EKMH250VSN822MP35T|22�35|P35|0.061|2.11| ||10,000|EKMH250VSN103MP40T|22�40|P40|0.05|2.39| ||12,000|EKMH250VSN123MP45T|22�45|P45|0.041|2.69| ||6,800|EKMH250VSN682MQ25T|25.4�25|Q25|0.073|1.87| ||8,200|EKMH250VSN822MQ30T|25.4�30|Q30|0.061|2.12| ||10,000|EKMH250VSN103MQ35T|25.4�35|Q35|0.05|2.42| ||12,000|EKMH250VSN123MQ40T|25.4�40|Q40|0.041|2.74| ||15,000|EKMH250VSN153MQ45T|25.4�45|Q45|0.033|3.15| ||18,000|EKMH250VSN183MQ50T|25.4�50|Q50|0.028|3.54| ||8,200|EKMH250VSN822MR25T|30�25|R25|0.061|2.15| ||10,000|EKMH250VSN103MR25T|30�25|R25|0.05|2.37| ||12,000|EKMH250VSN123MR30T|30�30|R30|0.041|2.7| ||15,000|EKMH250VSN153MR35T|30�35|R35|0.033|3.13| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 23 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**25 Volts**<br>**32 Volts Surge**|18,000|EKMH250VSN183MR40T|30�40|R40|0.028|3.54| ||22,000|EKMH250VSN223MR45T|30�45|R45|0.023|4.04| ||12,000|EKMH250VSN123MA25T|35�25|A25|0.041|2.74| ||15,000|EKMH250VSN153MA30T|35�30|A30|0.033|3.27| ||18,000|EKMH250VSN183MA30T|35�30|A30|0.028|3.58| ||22,000|EKMH250VSN223MA35T|35�35|A35|0.023|3.64| ||27,000|EKMH250VSN273MA45T|35�45|A45|0.018|4.73| ||33,000|EKMH250VSN333MA50T|35�50|A50|0.015|5.39| ||47,000|EKMH250VND473MA63T|35�63|A63|0.012|6.11| ||68,000|EKMH250VND683MA80T|35�80|A80|0.009|7.86| ||18,000|EKMH250VND183MB25T|40�25|B25|0.029|3.11| ||27,000|EKMH250VND273MB30T|40�30|B30|0.021|3.98| ||33,000|EKMH250VND333MB35T|40�35|B35|0.018|4.57| ||39,000|EKMH250VND393MB40T|40�40|B40|0.015|5.12| ||47,000|EKMH250VND473MB50T|40�50|B50|0.013|5.97| ||68,000|EKMH250VND683MB63T|40�63|B63|0.010|7.67| ||82,000|EKMH250VND823MB80T|40�80|B80|0.008|9.16| |||||||| |**35 Volts**<br>**44 Volts Surge**|3,300|EKMH350VSN332MP25T|22�25|P25|0.126|1.4| ||3,900|EKMH350VSN392MP30T|22�30|P30|0.106|1.57| ||4,700|EKMH350VSN472MP30T|22�30|P30|0.088|1.72| ||5,600|EKMH350VSN562MP35T|22�35|P35|0.074|1.95| ||6,800|EKMH350VSN682MP40T|22�40|P40|0.061|2.2| ||8,200|EKMH350VSN822MP50T|22�50|P50|0.051|2.55| ||4,700|EKMH350VSN472MQ25T|25.4�25|Q25|0.088|1.8| ||5,600|EKMH350VSN562MQ30T|25.4�30|Q30|0.074|1.96| ||6,800|EKMH350VSN682MQ35T|25.4�35|Q35|0.061|2.23| ||8,200|EKMH350VSN822MQ40T|25.4�40|Q40|0.051|2.53| ||10,000|EKMH350VSN103MQ45T|25.4�45|Q45|0.041|2.87| ||12,000|EKMH350VSN123MQ50T|25.4�50|Q50|0.035|3.24| ||5,600|EKMH350VSN562MR25T|30�25|R25|0.074|1.99| ||6,800|EKMH350VSN682MR25T|30�25|R25|0.061|2.19| ||8,200|EKMH350VSN822MR30T|30�30|R30|0.051|2.75| ||10,000|EKMH350VSN103MR35T|30�35|Q35|0.041|2.9| ||12,000|EKMH350VSN123MR40T|30�40|R40|0.035|3.23| ||15,000|EKMH350VSN153MR45T|30�45|R45|0.028|3.72| ||8,200|EKMH350VSN822MA25T|35�25|A25|0.051|2.75| ||10,000|EKMH350VSN103MA30T|35�30|A30|0.041|2.91| ||12,000|EKMH350VSN123MA30T|35�30|A30|0.035|2.99| ||15,000|EKMH350VSN153MA35T|35�35|A35|0.028|3.67| ||18,000|EKMH350VSN183MA40T|35�40|A40|0.023|4.37| ||22,000|EKMH350VSN223MA50T|35�50|A50|0.019|4.92| ||33,000|EKMH350VND333MA63T|35�63|A63|0.012|5.60| ||39,000|EKMH350VND393MA80T|35�80|A80|0.010|6.52| ||12,000|EKMH350VND123MB25T|40�25|B25|0.030|2.78| ||18,000|EKMH350VND183MB30T|40�30|B30|0.022|3.56| ||22,000|EKMH350VND223MB35T|40�35|B35|0.019|4.09| ||27,000|EKMH350VND273MB40T|40�40|B40|0.016|4.66| ||33,000|EKMH350VND333MB50T|40�50|B50|0.013|5.48| ||47,000|EKMH350VND473MB63T|40�63|B63|0.010|6.98| ||56,000|EKMH350VND563MB80T|40�80|B80|0.008|8.29| |||||||| |**50 Volts**<br>**63 Volts Surge**|1,800|EKMH500VSN182MP25T|22�25|P25|0.184|1.33| ||2,700|EKMH500VSN272MP30T|22�30|P30|0.123|1.69| ||3,300|EKMH500VSN332MP35T|22�35|P35|0.10|1.93| ||3,900|EKMH500VSN392MP40T|22�40|P40|0.085|2.16| ||4,700|EKMH500VSN472MP45T|22�45|P45|0.071|2.43| ||5,600|EKMH500VSN562MP50T|22�50|P50|0.059|2.75| ||2,700|EKMH500VSN272MQ25T|25.4�25|Q25|0.123|1.7| ||3,300|EKMH500VSN332MQ30T|25.4�30|Q30|0.10|1.85| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 24 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**50 Volts**<br>**63 Volts Surge**|3,900|EKMH500VSN392MQ35T|25.4�35|Q35|0.085|2.18| ||4,700|EKMH500VSN472MQ35T|25.4�35|Q35|0.071|2.39| ||5,600|EKMH500VSN562MQ40T|25.4�40|Q40|0.059|2.7| ||6,800|EKMH500VSN682MQ50T|25.4�50|Q50|0.049|3.3| ||3,900|EKMH500VSN392MR25T|30�25|R25|0.085|1.95| ||4,700|EKMH500VSN472MR30T|30�30|R30|0.071|2.25| ||5,600|EKMH500VSN562MR35T|30�35|R35|0.059|2.76| ||6,800|EKMH500VSN682MR40T|30�40|R40|0.049|3.3| ||8,200|EKMH500VSN822MR45T|30�45|R45|0.04|3.6| ||10,000|EKMH500VSN103MR50T|30�50|R50|0.033|4.04| ||4,700|EKMH500VSN472MA25T|35�25|A25|0.071|2.48| ||5,600|EKMH500VSN562MA25T|35�25|A25|0.059|2.7| ||6,800|EKMH500VSN682MA30T|35�30|A30|0.049|3.25| ||8,200|EKMH500VSN822MA35T|35�35|A35|0.04|3.55| ||10,000|EKMH500VSN103MA40T|35�40|A40|0.033|4.03| ||12,000|EKMH500VSN123MA45T|35�45|A45|0.028|4.55| ||18,000|EKMH500VND183MA63T|35�63|A63|0.014|4.63| ||27,000|EKMH500VND273MA80T|35�80|A80|0.011|6.06| ||8,200|EKMH500VND822MB25T|40�25|B25|0.035|2.57| ||10,000|EKMH500VND103MB30T|40�30|B30|0.027|2.97| ||12,000|EKMH500VND123MB35T|40�35|B35|0.023|3.37| ||15,000|EKMH500VND153MB40T|40�40|B40|0.019|3.89| ||22,000|EKMH500VND223MB50T|40�50|B50|0.015|5.0| ||27,000|EKMH500VND273MB63T|40�63|B63|0.012|5.92| ||39,000|EKMH500VND393MB80T|40�80|B80|0.009|7.74| |||||||| |**63 Volts**<br>**79 Volts Surge**|1,200|EKMH630VSN122MP25T|22�25|P25|0.207|1.19| ||1,500|EKMH630VSN152MP25T|22�25|P25|0.166|1.33| ||1,800|EKMH630VSN182MP30T|22�30|P30|0.138|1.51| ||2,200|EKMH630VSN222MP35T|22�35|P35|0.113|1.73| ||2,700|EKMH630VSN272MP40T|22�40|P40|0.092|1.97| ||3,300|EKMH630VSN332MP50T|22�50|P50|0.075|2.29| ||1,800|EKMH630VSN182MQ25T|25.4�25|Q25|0.138|1.52| ||2,200|EKMH630VSN222MQ30T|25.4�30|Q30|0.113|1.74| ||2,700|EKMH630VSN272MQ35T|25.4�35|Q35|0.092|1.99| ||3,300|EKMH630VSN332MQ40T|25.4�40|Q40|0.075|2.27| ||3,900|EKMH630VSN392MQ45T|25.4�45|Q45|0.064|2.54| ||4,700|EKMH630VSN472MQ50T|25.4�50|Q50|0.053|2.86| ||2,700|EKMH630VSN272MR25T|30�25|R25|0.092|1.76| ||3,300|EKMH630VSN332MR30T|30�30|R30|0.075|2.24| ||3,900|EKMH630VSN392MR35T|30�35|R35|0.064|2.55| ||4,700|EKMH630VSN472MR40T|30�40|R40|0.053|2.86| ||5,600|EKMH630VSN562MR45T|30�45|R45|0.044|3.22| ||6,800|EKMH630VSN682MR50T|30�50|R50|0.037|3.65| ||3,300|EKMH630VSN332MA25T|35�25|A25|0.075|2.06| ||3,900|EKMH630VSN392MA25T|35�25|A25|0.064|2.24| ||4,700|EKMH630VSN472MA30T|35�30|A30|0.053|2.79| ||5,600|EKMH630VSN562MA35T|35�35|A35|0.044|3.19| ||6,800|EKMH630VSN682MA40T|35�40|A40|0.037|3.64| ||8,200|EKMH630VSN822MA45T|35�45|A45|0.03|3.9| ||10,000|EKMH630VSN103MA50T|35�50|A50|0.025|4.4| ||15,000|EKMH630VND153MA63T|35�63|A63|0.014|4.88| ||18,000|EKMH630VND183MA80T|35�80|A80|0.012|5.72| ||5,600|EKMH630VND562MB25T|40�25|B25|0.038|2.45| ||8,200|EKMH630VND822MB30T|40�30|B30|0.028|3.1| ||10,000|EKMH630VND103MB35T|40�35|B35|0.026|3.56| ||12,000|EKMH630VND123MB40T|40�40|B40|0.02|4.01| ||15,000|EKMH630VND153MB50T|40�50|B50|0.016|4.77| ||18,000|EKMH630VND183MB63T|40�63|B63|0.013|5.58| ||27,000|EKMH630VND273MB80T|40�80|B80|0.010|7.43| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 25 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**80 Volts**<br>**100 Volts Surge**|820|EKMH800VSN821MP25T|22�25|P25|0.303|1.11| ||1,000|EKMH800VSN102MP25T|22�25|P25|0.249|1.22| ||1,200|EKMH800VSN122MP30T|22�30|P30|0.207|1.38| ||1,500|EKMH800VSN152MP35T|22�35|P35|0.166|1.59| ||1,800|EKMH800VSN182MP40T|22�40|P40|0.138|1.8| ||2,200|EKMH800VSN222MP45T|22�45|P45|0.113|2.04| ||1,200|EKMH800VSN122MQ25T|25.4�25|Q25|0.207|1.39| ||1,500|EKMH800VSN152MQ30T|25.4�30|Q30|0.166|1.61| ||1,800|EKMH800VSN182MQ30T|25.4�30|Q30|0.138|1.76| ||2,200|EKMH800VSN222MQ35T|25.4�35|Q35|0.113|2.01| ||2,700|EKMH800VSN272MQ45T|25.4�45|Q45|0.092|2.36| ||3,300|EKMH800VSN332MQ50T|25.4�50|Q50|0.075|2.68| ||1,800|EKMH800VSN182MR25T|30�25|R25|0.138|1.65| ||2,200|EKMH800VSN222MR30T|30�30|R30|0.113|2.05| ||2,700|EKMH800VSN272MR35T|30�35|R35|0.092|2.35| ||3,300|EKMH800VSN332MR40T|30�40|R40|0.075|2.68| ||3,900|EKMH800VSN392MR45T|30�45|R45|0.064|3.0| ||4,700|EKMH800VSN472MR50T|30�50|R50|0.053|3.39| ||2,200|EKMH800VSN222MA25T|35�25|A25|0.113|2.07| ||2,700|EKMH800VSN272MA25T|35�25|A25|0.092|2.29| ||3,300|EKMH800VSN332MA30T|35�30|A30|0.075|2.45| ||3,900|EKMH800VSN392MA35T|35�35|A35|0.064|2.98| ||4,700|EKMH800VSN472MA40T|35�40|A40|0.053|3.38| ||5,600|EKMH800VSN562MA45T|35�45|A45|0.044|3.8| ||6,800|EKMH800VSN682MA50T|35�50|A50|0.037|3.9| ||8,200|EKMH800VND822MA63T|35�63|A63|0.03|4.42| ||12,000|EKMH800VND103MA80T|35�80|A80|0.021|5.72| ||3,900|EKMH800VND392MB25T|40�25|B25|0.064|2.5| ||4,700|EKMH800VND472MB30T|40�30|B30|0.053|2.88| ||5,600|EKMH800VND562MB35T|40�35|B35|0.044|3.26| ||6,800|EKMH800VND682MB40T|40�40|B40|0.037|3.7| ||10,000|EKMH800VND103MB50T|40�50|B50|0.025|4.77| ||12,000|EKMH800VND123MB63T|40�63|B63|0.021|5.58| ||18,000|EKMH800VND183MB80T|40�80|B80|0.014|7.43| |||||||| |**100 Volts**<br>**125 Volts Surge**|560|EKMH101VSN561MP25T|22�25|P25|0.444|1.05| ||820|EKMH101VSN821MP30T|22�30|P30|0.303|1.32| ||1,000|EKMH101VSN102MP35T|22�35|P35|0.249|1.5| ||1,200|EKMH101VSN122MP40T|22�40|P40|0.207|1.69| ||1,500|EKMH101VSN152MP45T|22�45|P45|0.166|1.94| ||820|EKMH101VSN821MQ25T|25.4�25|Q25|0.303|1.33| ||1,000|EKMH101VSN102MQ30T|25.4�30|Q30|0.249|1.51| ||1,200|EKMH101VSN122MQ35T|25.4�35|Q35|0.207|1.71| ||1,500|EKMH101VSN152MQ40T|25.4�40|Q40|0.166|1.98| ||1,800|EKMH101VSN182MQ45T|25.4�45|Q45|0.138|2.23| ||2,200|EKMH101VSN222MQ50T|25.4�50|Q50|0.113|2.53| ||1,200|EKMH101VSN122MR25T|30�25|R25|0.207|1.68| ||1,500|EKMH101VSN152MR30T|30�30|R30|0.166|1.95| ||1,800|EKMH101VSN182MR35T|30�35|R35|0.138|2.5| ||2,200|EKMH101VSN222MR40T|30�40|R40|0.113|2.7| ||2,700|EKMH101VSN272MR45T|30�45|R45|0.092|2.88| ||3,300|EKMH101VSN332MR50T|30�50|R50|0.075|3.28| ||1,500|EKMH101VSN152MA25T|35�25|A25|0.166|1.98| ||1,800|EKMH101VSN182MA25T|35�25|A25|0.138|2.17| ||2,200|EKMH101VSN222MA30T|35�30|A30|0.113|2.5| ||2,700|EKMH101VSN272MA35T|35�35|A35|0.092|2.86| ||3,300|EKMH101VSN332MA40T|35�40|A40|0.075|3.27| ||3,900|EKMH101VSN392MA45T|35�45|A45|0.064|3.67| ||4,700|EKMH101VSN472MA50T|35�50|A50|0.053|3.8| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 26 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**100 Volts**<br>**125 Volts Surge**|5,600|EKMH101VND562MA63T|35�63|A63|0.044|4.08| ||6,800|EKMH101VND682MA80T|35�80|A80|0.037|4.81| ||2,200|EKMH101VND222MB25T|40�25|B25|0.113|2.1| ||2,700|EKMH101VND272MB30T|40�30|B30|0.092|2.44| ||3,300|EKMH101VND332MB35T|40�35|B35|0.075|2.8| ||4,700|EKMH101VND472MB40T|40�40|B40|0.053|3.44| ||5,600|EKMH101VND562MB50T|40�50|B50|0.044|3.99| ||8,200|EKMH101VND822MB63T|40�63|B63|0.03|5.16| ||10,000|EKMH101VND103MB80T|40�80|B80|0.025|6.19| |||||||| |**160 Volts**<br>**200 Volts Surge**|220|EKMH161VSN221MP20T|22�20|P20|1.13|0.8| ||270|EKMH161VSN271MP25T|22�25|P25|0.614|1.09| ||330|EKMH161VSN331MP25T|22�25|P25|0.502|1.2| ||390|EKMH161VSN391MP30T|22�30|P30|0.425|1.3| ||470|EKMH161VSN471MP35T|22�35|P35|0.353|1.4| ||560|EKMH161VSN561MP40T|22�40|P40|0.296|1.5| ||680|EKMH161VSN681MP45T|22�45|P45|0.244|1.71| ||820|EKMH161VSN821MP50T|22�50|P50|0.202|1.93| ||330|EKMH161VSN331MQ20T|25.4�20|Q20|0.753|1.02| ||390|EKMH161VSN391MQ25T|25.4�25|Q25|0.425|1.28| ||470|EKMH161VSN471MQ25T|25.4�25|Q25|0.353|1.41| ||560|EKMH161VSN561MQ30T|25.4�30|Q30|0.296|1.51| ||680|EKMH161VSN681MQ35T|25.4�35|Q35|0.244|1.7| ||820|EKMH161VSN821MQ40T|25.4�40|Q40|0.202|2.01| ||1,000|EKMH161VSN102MQ45T|25.4�45|Q45|0.166|2.2| ||1,200|EKMH161VSN122MQ50T|25.4�50|Q50|0.138|2.45| ||390|EKMH161VSN391MR20T|30�20|R20|0.638|1.17| ||470|EKMH161VSN471MR20T|30�20|R20|0.529|1.28| ||560|EKMH161VSN561MR25T|30�25|R25|0.296|1.56| ||680|EKMH161VSN681MR25T|30�25|R25|0.244|1.72| ||820|EKMH161VSN821MR30T|30�30|R30|0.202|2.0| ||1,000|EKMH161VSN102MR35T|30�35|R35|0.166|2.22| ||1,200|EKMH161VSN122MR40T|30�40|R40|0.138|2.44| ||1,500|EKMH161VSN152MR45T|30�45|R45|0.111|2.82| ||1,800|EKMH161VSN182MR50T|30�50|R50|0.092|3.31| ||560|EKMH161VSN561MA20T|35�20|A20|0.444|1.54| ||680|EKMH161VSN681MA20T|35�20|A20|0.366|1.7| ||820|EKMH161VSN821MA25T|35�25|A25|0.303|1.91| ||1,000|EKMH161VSN102MA25T|35�25|A25|0.249|2.11| ||1,200|EKMH161VSN122MA30T|35�30|A30|0.207|2.44| ||1,500|EKMH161VSN152MA35T|35�35|A35|0.166|2.5| ||1,800|EKMH161VSN182MA45T|35�45|A45|0.138|3.31| ||2,200|EKMH161VSN222MA50T|35�50|A50|0.113|3.77| ||3,300|EKMH161VND332MA63T|35�63|A63|0.075|3.96| ||3,900|EKMH161VND392MA80T|35�80|A80|0.064|4.61| ||1,200|EKMH161VND122MB25T|40�25|B25|0.207|1.96| ||1,800|EKMH161VND182MB30T|40�30|B30|0.138|2.52| ||2,200|EKMH161VND222MB35T|40�35|B35|0.113|2.89| ||2,700|EKMH161VND272MB40T|40�40|B40|0.092|3.3| ||3,300|EKMH161VND332MB50T|40�50|B50|0.075|3.87| ||4,700|EKMH161VND472MB63T|40�63|B63|0.053|4.94| ||5,600|EKMH161VND562MB80T|40�80|B80|0.044|5.86| |||||||| |**180 Volts**<br>**225 Volts Surge**|180|EKMH181VSN181MP20T|22�20|P20|1.381|0.73| ||220|EKMH181VSN221MP20T|22�20|P20|1.13|0.8| ||270|EKMH181VSN271MP25T|22�25|P25|0.614|0.96| ||330|EKMH181VSN331MP25T|22�25|P25|0.502|1.06| ||390|EKMH181VSN391MP30T|22�30|P30|0.425|1.3| ||470|EKMH181VSN471MP35T|22�35|P35|0.353|1.35| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 27 ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**180 Volts**<br>**225 Volts Surge**|560|EKMH181VSN561MP40T|22�40|P40|0.296|1.51| ||680|EKMH181VSN681MP45T|22�45|P45|0.244|1.71| ||820|EKMH181VSN821MP50T|22�50|P50|0.202|1.97| ||270|EKMH181VSN271MQ20T|25.4�20|Q20|0.921|0.92| ||330|EKMH181VSN331MQ25T|25.4�25|Q25|0.502|1.2| ||390|EKMH181VSN391MQ25T|25.4�25|Q25|0.425|1.3| ||470|EKMH181VSN471MQ30T|25.4�30|Q30|0.353|1.4| ||560|EKMH181VSN561MQ35T|25.4�35|Q35|0.296|1.53| ||680|EKMH181VSN681MQ40T|25.4�40|Q40|0.244|1.74| ||820|EKMH181VSN821MQ45T|25.4�45|Q45|0.202|1.97| ||1,000|EKMH181VSN102MQ50T|25.4�50|Q50|0.166|2.23| ||390|EKMH181VSN391MR20T|30�20|R20|0.638|1.17| ||470|EKMH181VSN471MR25T|30�25|R25|0.353|1.38| ||560|EKMH181VSN561MR25T|30�25|R25|0.296|1.51| ||680|EKMH181VSN681MR30T|30�30|R30|0.244|1.72| ||820|EKMH181VSN821MR35T|30�35|R35|0.202|2.0| ||1,000|EKMH181VSN102MR40T|30�40|R40|0.166|2.24| ||1,200|EKMH181VSN122MR45T|30�45|R45|0.138|2.52| ||1,500|EKMH181VSN152MR50T|30�50|R50|0.111|2.89| ||470|EKMH181VSN471MA20T|35�20|A20|0.529|1.41| ||560|EKMH181VSN561MA20T|35�20|A20|0.444|1.53| ||680|EKMH181VSN681MA25T|35�25|A25|0.366|1.74| ||820|EKMH181VSN821MA25T|35�25|A25|0.303|1.91| ||1,000|EKMH181VSN102MA30T|35�30|A30|0.249|2.26| ||1,200|EKMH181VSN122MA35T|35�35|A35|0.207|2.5| ||1,500|EKMH181VSN152MA40T|35�40|A40|0.166|2.89| ||1,800|EKMH181VSN182MA40T|35�40|A40|0.138|3.17| ||2,200|EKMH181VSN222MA50T|35�50|A50|0.113|3.6| ||2,700|EKMH181VND272MA63T|35�63|A63|0.092|4.01| ||3,300|EKMH181VND332MA80T|35�80|A80|0.075|4.74| ||1,000|EKMH181VND102MB25T|40�25|B25|0.249|2.01| ||1,500|EKMH181VND152MB30T|40�30|B30|0.166|2.57| ||1,800|EKMH181VND182MB35T|40�35|B35|0.138|2.92| ||2,200|EKMH181VND222MB40T|40�40|B40|0.113|3.33| ||2,700|EKMH181VND272MB50T|40�50|B50|0.092|3.92| ||3,900|EKMH181VND392MB63T|40�63|B63|0.064|5.03| ||4,700|EKMH181VND472MB80T|40�80|B80|0.053|6.01| |||||||| |**200 Volts**<br>**250 Volts Surge**|150|EKMH201VSN151MP20T|22�20|P20|1.658|0.66| ||180|EKMH201VSN181MP20T|22�20|P20|1.381|0.72| ||220|EKMH201VSN221MP25T|22�25|P25|0.753|0.79| ||270|EKMH201VSN271MP25T|22�25|P25|0.614|0.87| ||330|EKMH201VSN331MP30T|22�30|P30|0.502|1.2| ||390|EKMH201VSN391MP35T|22�35|P35|0.425|1.31| ||470|EKMH201VSN471MP40T|22�40|P40|0.353|1.4| ||560|EKMH201VSN561MP45T|22�45|P45|0.296|1.56| ||680|EKMH201VSN681MP50T|22�50|P50|0.244|1.74| ||220|EKMH201VSN221MQ20T|25.4�20|Q20|1.13|0.83| ||270|EKMH201VSN271MQ25T|25.4�25|Q25|0.614|1.09| ||330|EKMH201VSN331MQ25T|25.4�25|Q25|0.502|1.21| ||390|EKMH201VSN391MQ25T|25.4�25|Q25|0.425|1.31| ||470|EKMH201VSN471MQ30T|25.4�30|Q30|0.353|1.41| ||560|EKMH201VSN561MQ35T|25.4�35|Q35|0.296|1.53| ||680|EKMH201VSN681MQ40T|25.4�40|Q40|0.244|1.74| ||820|EKMH201VSN821MQ50T|25.4�50|Q50|0.202|2.04| ||330|EKMH201VSN331MR20T|30�20|R20|0.753|1.08| ||390|EKMH201VSN391MR25T|30�25|R25|0.425|1.37| ||470|EKMH201VSN471MR25T|30�25|R25|0.353|1.5| ||560|EKMH201VSN561MR25T|30�25|R25|0.296|1.63| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 28 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**200 Volts**<br>**250 Volts Surge**|680|EKMH201VSN681MR30T|30�30|R30|0.244|1.74| ||820|EKMH201VSN821MR35T|30�35|R35|0.202|2.0| ||1,000|EKMH201VSN102MR45T|30�45|R45|0.166|2.3| ||1,200|EKMH201VSN122MR50T|30�50|R50|0.138|2.6| ||470|EKMH201VSN471MA20T|35�20|A20|0.529|1.41| ||560|EKMH201VSN561MA25T|35�25|A25|0.444|1.56| ||680|EKMH201VSN681MA25T|35�25|A25|0.366|1.72| ||820|EKMH201VSN821MA30T|35�30|A30|0.303|2.04| ||1,000|EKMH201VSN102MA35T|35�35|A35|0.249|2.3| ||1,200|EKMH201VSN122MA40T|35�40|A40|0.207|2.65| ||1,500|EKMH201VSN152MA45T|35�45|A45|0.166|3.08| ||1,800|EKMH201VSN182MA50T|35�50|A50|0.138|3.47| ||2,200|EKMH201VND222MA63T|35�63|A63|0.113|3.62| ||3,300|EKMH201VND332MA80T|35�80|A80|0.075|4.74| ||1,000|EKMH201VND102MB25T|40�25|B25|0.249|2.01| ||1,200|EKMH201VND122MB30T|40�30|B30|0.207|2.3| ||1,500|EKMH201VND152MB35T|40�35|B35|0.166|2.67| ||1,800|EKMH201VND182MB40T|40�40|B40|0.138|3.01| ||2,700|EKMH201VND272MB50T|40�50|B50|0.092|3.92| ||3,300|EKMH201VND332MB63T|40�63|B63|0.075|4.63| ||4,700|EKMH201VND472MB80T|40�80|B80|0.053|6.01| |||||||| |**250 Volts**<br>**300 Volts Surge**|120|EKMH251VSN121MP20T|22�20|P20|2.072|0.59| ||150|EKMH251VSN151MP25T|22�25|P25|1.105|0.71| ||180|EKMH251VSN181MP25T|22�25|P25|0.921|0.78| ||220|EKMH251VSN221MP30T|22�30|P30|0.753|0.95| ||270|EKMH251VSN271MP35T|22�35|P35|0.614|1.14| ||330|EKMH251VSN331MP40T|22�40|P40|0.502|1.26| ||390|EKMH251VSN391MP45T|22�45|P45|0.425|1.49| ||470|EKMH251VSN471MP50T|22�50|P50|0.353|1.57| ||180|EKMH251VSN181MQ20T|25.4�20|Q20|1.381|0.75| ||220|EKMH251VSN221MQ25T|25.4�25|Q25|0.753|0.95| ||270|EKMH251VSN271MQ25T|25.4�25|Q25|0.614|1.05| ||330|EKMH251VSN331MQ30T|25.4�30|Q30|0.502|1.2| ||390|EKMH251VSN391MQ35T|25.4�35|Q35|0.425|1.49| ||470|EKMH251VSN471MQ40T|25.4�40|Q40|0.353|1.57| ||560|EKMH251VSN561MQ45T|25.4�45|Q45|0.296|1.79| ||680|EKMH251VSN681MQ50T|25.4�50|Q50|0.244|1.84| ||220|EKMH251VSN221MR20T|30�20|R20|1.13|0.88| ||270|EKMH251VSN271MR20T|30�20|R20|0.921|0.97| ||330|EKMH251VSN331MR25T|30�25|R25|0.502|1.26| ||390|EKMH251VSN391MR25T|30�25|R25|0.425|1.37| ||470|EKMH251VSN471MR30T|30�30|R30|0.353|1.57| ||560|EKMH251VSN561MR35T|30�35|R35|0.296|1.79| ||680|EKMH251VSN681MR40T|30�40|R40|0.244|2.0| ||820|EKMH251VSN821MR45T|30�45|R45|0.202|2.16| ||330|EKMH251VSN331MA20T|35�20|A20|0.753|1.18| ||390|EKMH251VSN391MA25T|35�25|A25|0.638|1.43| ||470|EKMH251VSN471MA25T|35�25|A25|0.529|1.57| ||560|EKMH251VSN561MA30T|35�30|A30|0.444|1.79| ||680|EKMH251VSN681MA30T|35�30|A30|0.366|1.97| ||820|EKMH251VSN821MA35T|35�35|A35|0.303|1.98| ||1,000|EKMH251VSN102MA40T|35�40|A40|0.249|2.3| ||1,200|EKMH251VSN122MA45T|35�45|A45|0.207|2.43| ||1,800|EKMH251VND182MA63T|35�63|A63|0.138|3.27| ||2,200|EKMH251VND222MA80T|35�80|A80|0.113|3.87| ||680|EKMH251VND681MB25T|40�25|B25|0.366|1.65| ||1,000|EKMH251VND102MB30T|40�30|B30|0.249|2.1| ||1,200|EKMH251VND122MB35T|40�35|B35|0.207|2.39| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 29 ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**250 Volts**<br>**300 Volts Surge**|1,500|EKMH251VND152MB40T|40�40|B40|0.166|2.75| ||1,800|EKMH251VND182MB50T|40�50|B50|0.138|3.2| ||2,200|EKMH251VND222MB63T|40�63|B63|0.113|3.78| ||3,300|EKMH251VND332MB80T|40�80|B80|0.075|5.03| |||||||| |**315 Volts**<br>**365 Volts Surge**|68|EKMH3B1VSN680MP20T|22�20|P20|3.656|0.44| ||82|EKMH3B1VSN820MP25T|22�25|P25|3.032|0.64| ||100|EKMH3B1VSN101MP30T|22�30|P30|2.486|0.68| ||120|EKMH3B1VSN121MP30T|22�30|P30|2.072|0.75| ||150|EKMH3B1VSN151MP35T|22�35|P35|1.658|0.82| ||180|EKMH3B1VSN181MP40T|22�40|P40|1.381|0.91| ||220|EKMH3B1VSN221MP45T|22�45|P45|1.13|1.02| ||270|EKMH3B1VSN271MP50T|22�50|P50|0.921|1.16| ||100|EKMH3B1VSN101MQ20T|25.4�20|Q20|2.486|0.56| ||120|EKMH3B1VSN121MQ25T|25.4�25|Q25|2.072|0.76| ||150|EKMH3B1VSN151MQ30T|25.4�30|Q30|1.658|0.8| ||180|EKMH3B1VSN181MQ30T|25.4�30|Q30|1.381|0.88| ||220|EKMH3B1VSN221MQ35T|25.4�35|Q35|1.13|1.02| ||270|EKMH3B1VSN271MQ40T|25.4�40|Q40|0.921|1.15| ||330|EKMH3B1VSN331MQ50T|25.4�50|Q50|0.753|1.33| ||120|EKMH3B1VSN121MR20T|30�20|R20|2.072|0.65| ||150|EKMH3B1VSN151MR25T|30�25|R25|1.658|0.82| ||180|EKMH3B1VSN181MR25T|30�25|R25|1.381|0.9| ||220|EKMH3B1VSN221MR30T|30�30|R30|1.13|1.02| ||270|EKMH3B1VSN271MR35T|30�35|R35|0.921|1.17| ||330|EKMH3B1VSN331MR35T|30�35|R35|0.753|1.3| ||390|EKMH3B1VSN391MR40T|30�40|R40|0.638|1.46| ||470|EKMH3B1VSN471MR50T|30�50|R50|0.529|1.7| ||180|EKMH3B1VSN181MA20T|35�20|A20|1.381|0.83| ||220|EKMH3B1VSN221MA25T|35�25|A25|1.13|1.03| ||270|EKMH3B1VSN271MA25T|35�25|A25|0.921|1.15| ||330|EKMH3B1VSN331MA30T|35�30|A30|0.753|1.32| ||390|EKMH3B1VSN391MA35T|35�35|A35|0.638|1.47| ||470|EKMH3B1VSN471MA40T|35�40|A40|0.529|1.69| ||560|EKMH3B1VSN561MA45T|35�45|A45|0.444|1.9| ||680|EKMH3B1VSN681MA50T|35�50|A50|0.366|2.15| ||1,000|EKMH3B1VND102MA63T|35�63|A63|0.249|2.82| ||1,200|EKMH3B1VND122MA80T|35�80|A80|0.207|3.3| ||330|EKMH3B1VND331MB25T|40�25|B25|0.753|1.33| ||470|EKMH3B1VND471MB30T|40�30|B30|0.529|1.66| ||560|EKMH3B1VND561MB35T|40�35|B35|0.444|1.88| ||680|EKMH3B1VND681MB40T|40�40|B40|0.366|2.14| ||1,000|EKMH3B1VND102MB50T|40�50|B50|0.249|2.75| ||1,500|EKMH3B1VND152MB63T|40�63|B63|0.166|3.6| ||1,800|EKMH3B1VND182MB80T|40�80|B80|0.138|4.29| |||||||| |**350 Volts**<br>**400 Volts Surge**|56|EKMH351VSN560MP20T|22�20|P20|4.44|0.4| ||68|EKMH351VSN680MP25T|22�25|P25|3.656|0.51| ||82|EKMH351VSN820MP25T|22�25|P25|3.032|0.56| ||100|EKMH351VSN101MP30T|22�30|P30|2.486|0.69| ||120|EKMH351VSN121MP35T|22�35|P35|2.072|0.75| ||150|EKMH351VSN151MP40T|22�40|P40|1.658|0.82| ||180|EKMH351VSN181MP45T|22�45|P45|1.381|0.92| ||220|EKMH351VSN221MP50T|22�50|P50|1.13|1.05| ||82|EKMH351VSN820MQ20T|25.4�20|Q20|3.032|0.51| ||100|EKMH351VSN101MQ25T|25.4�25|Q25|2.486|0.69| ||120|EKMH351VSN121MQ25T|25.4�25|Q25|2.072|0.75| ||150|EKMH351VSN151MQ30T|25.4�30|Q30|1.658|0.83| ||180|EKMH351VSN181MQ35T|25.4�35|Q35|1.381|0.92| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** 30 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**350 Volts**<br>**400 Volts Surge**|220|EKMH351VSN221MQ40T|25.4�40|Q40|1.13|1.04| ||270|EKMH351VSN271MQ45T|25.4�45|Q45|0.921|1.18| ||100|EKMH351VSN101MR20T|30�20|R20|2.486|0.59| ||120|EKMH351VSN121MR20T|30�20|R20|2.072|0.64| ||150|EKMH351VSN151MR25T|30�25|R25|1.658|0.83| ||180|EKMH351VSN181MR25T|30�25|R25|1.381|0.91| ||220|EKMH351VSN221MR30T|30�30|R30|1.13|1.02| ||270|EKMH351VSN271MR35T|30�35|R35|0.921|1.17| ||330|EKMH351VSN331MR40T|30�40|R40|0.753|1.34| ||390|EKMH351VSN391MR45T|30�45|R45|0.638|1.51| ||150|EKMH351VSN151MA20T|35�20|A20|1.658|0.76| ||180|EKMH351VSN181MA25T|35�25|A25|1.381|0.94| ||220|EKMH351VSN221MA25T|35�25|A25|1.13|1.04| ||270|EKMH351VSN271MA30T|35�30|A30|0.921|1.2| ||330|EKMH351VSN331MA30T|35�30|A30|0.753|1.33| ||390|EKMH351VSN391MA35T|35�35|A35|0.638|1.47| ||470|EKMH351VSN471MA40T|35�40|A40|0.529|1.69| ||560|EKMH351VSN561MA45T|35�45|A45|0.444|1.9| ||1,000|EKMH351VND102MA63T|35�63|A63|0.249|2.82| ||1,200|EKMH351VND122MA80T|35�80|A80|0.207|3.3| ||330|EKMH351VND331MB25T|40�25|B25|0.753|1.33| ||470|EKMH351VND471MB30T|40�30|B30|0.529|1.66| ||560|EKMH351VND561MB35T|40�35|B35|0.444|1.88| ||680|EKMH351VND681MB40T|40�40|B40|0.366|2.14| ||1,000|EKMH351VND102MB50T|40�50|B50|0.249|2.75| ||1,200|EKMH351VND122MB63T|40�63|B63|0.207|3.22| ||1,800|EKMH351VND182MB80T|40�80|B80|0.138|4.29| |||||||| |**400 Volts**<br>**450 Volts Surge**|47|EKMH401VSN470MP20T|22�20|P20|5.29|0.37| ||56|EKMH401VSN560MP20T|22�20|P20|4.44|0.4| ||68|EKMH401VSN680MP25T|22�25|P25|3.656|0.51| ||82|EKMH401VSN820MP30T|22�30|P30|3.032|0.58| ||100|EKMH401VSN101MP30T|22�30|P30|2.486|0.64| ||120|EKMH401VSN121MP35T|22�35|P35|2.072|0.72| ||150|EKMH401VSN151MP40T|22�40|P40|1.658|0.82| ||180|EKMH401VSN181MP50T|22�50|P50|1.381|0.95| ||68|EKMH401VSN680MQ20T|25.4�20|Q20|3.656|0.46| ||82|EKMH401VSN820MQ25T|25.4�25|Q25|3.032|0.64| ||100|EKMH401VSN101MQ25T|25.4�25|Q25|2.486|0.67| ||120|EKMH401VSN121MQ30T|25.4�30|Q30|2.072|0.72| ||150|EKMH401VSN151MQ35T|25.4�35|Q35|1.658|0.84| ||180|EKMH401VSN181MQ40T|25.4�40|Q40|1.381|0.94| ||220|EKMH401VSN221MQ45T|25.4�45|Q45|1.13|1.07| ||270|EKMH401VSN271MQ50T|25.4�50|Q50|0.921|1.21| ||100|EKMH401VSN101MR20T|30�20|R20|2.486|0.59| ||120|EKMH401VSN121MR25T|30�25|R25|2.072|0.76| ||150|EKMH401VSN151MR25T|30�25|R25|1.658|0.84| ||180|EKMH401VSN181MR30T|30�30|R30|1.381|0.92| ||220|EKMH401VSN221MR35T|30�35|R35|1.13|1.06| ||270|EKMH401VSN271MR40T|30�40|R40|0.921|1.21| ||330|EKMH401VSN331MR45T|30�45|R45|0.753|1.39| ||390|EKMH401VSN391MR50T|30�50|R50|0.638|1.55| ||150|EKMH401VSN151MA20T|35�20|A20|1.658|0.76| ||180|EKMH401VSN181MA25T|35�25|A25|1.381|0.94| ||220|EKMH401VSN221MA30T|35�30|A30|1.13|1.08| ||270|EKMH401VSN271MA30T|35�30|A30|0.921|1.2| ||330|EKMH401VSN331MA35T|35�35|A35|0.753|1.35| ||390|EKMH401VSN391MA40T|35�40|A40|0.638|1.54| ||470|EKMH401VSN471MA45T|35�45|A45|0.529|1.74| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** *** Refer to diagram of dimensions for detailed case size specifications.** United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 31 ## **KMH Series** ## **Standard Voltage Ratings - Snap Mount** |**Rated**<br>**Voltage**<br>**(WVDC)**|**Capacitance**<br>**(µF)**|**Global**<br>**Part Number†**|**Nominal**<br>**Case Size***<br>**D**�**L (mm)**|**Case**<br>**Size**<br>**Code**|**Maximum ESR**<br>**(**Ω**) at**<br>�**20**�**C,120Hz**|**Rated**<br>**Ripple Current**<br>**(A rms) at**<br>�**105**�**C,120Hz**| |---|---|---|---|---|---|---| |||||||| |**400 Volts**<br>**450 Volts Surge**|820|EKMH401VND821MA63T|35�63|A63|0.303|2.55| ||1,000|EKMH401VND102MA80T|35�80|A80|0.249|3.01| ||270|EKMH401VND271MB25T|40�25|B25|0.921|1.2| ||390|EKMH401VND391MB30T|40�30|B30|0.638|1.51| ||470|EKMH401VND471MB35T|40�35|B35|0.529|1.72| ||560|EKMH401VND561MB40T|40�40|B40|0.444|1.94| ||820|EKMH401VND821MB50T|40�50|B50|0.303|2.49| ||1,200|EKMH401VND122MB63T|40�63|B63|0.207|3.22| ||1,500|EKMH401VND152MB80T|40�80|B80|0.166|3.92| |||||||| |**450 Volts**<br>**500 Volts Surge**|56|EKMH451VSN560MP25T|22�25|P25|4.44|0.4| ||68|EKMH451VSN680MP30T|22�30|P30|3.656|0.5| ||82|EKMH451VSN820MP35T|22�35|P35|3.032|0.56| ||100|EKMH451VSN101MP40T|22�40|P40|2.486|0.64| ||120|EKMH451VSN121MP45T|22�45|P45|2.072|0.72| ||150|EKMH451VSN151MP50T|22�50|P50|1.658|0.79| ||68|EKMH451VSN680MQ25T|25.4�25|Q25|3.656|0.5| ||82|EKMH451VSN820MQ25T|25.4�25|Q25|3.032|0.55| ||100|EKMH451VSN101MQ30T|25.4�30|Q30|2.486|0.57| ||120|EKMH451VSN121MQ35T|25.4�35|Q35|2.072|0.71| ||150|EKMH451VSN151MQ40T|25.4�40|Q40|1.658|0.75| ||180|EKMH451VSN181MQ45T|25.4�45|Q45|1.381|0.84| ||220|EKMH451VSN221MQ50T|25.4�50|Q50|1.13|0.98| ||100|EKMH451VSN101MR25T|30�25|R25|2.486|0.64| ||120|EKMH451VSN121MR25T|30�25|R25|2.072|0.7| ||150|EKMH451VSN151MR30T|30�30|R30|1.658|0.74| ||180|EKMH451VSN181MR35T|30�35|R35|1.381|0.87| ||220|EKMH451VSN221MR40T|30�40|R40|1.13|0.98| ||270|EKMH451VSN271MR45T|30�45|R45|0.921|1.15| ||330|EKMH451VSN331MR50T|30�50|R50|0.753|1.38| ||150|EKMH451VSN151MA25T|35�25|A25|1.658|0.75| ||180|EKMH451VSN181MA30T|35�30|A30|1.381|0.9| ||220|EKMH451VSN221MA30T|35�30|A30|1.13|1.0| ||270|EKMH451VSN271MA35T|35�35|A35|0.921|1.17| ||330|EKMH451VSN331MA40T|35�40|A40|0.753|1.38| ||390|EKMH451VSN391MA45T|35�45|A45|0.638|1.55| ||470|EKMH451VSN471MA50T|35�50|A50|0.529|1.72| ||560|EKMH451VND561MA63T|35�63|A63|0.444|2.11| ||820|EKMH451VND821MA80T|35�80|A80|0.303|2.73| ||220|EKMH451VND221MB25T|40�25|B25|1.13|1.09| ||270|EKMH451VND271MB30T|40�30|B30|0.921|1.26| ||390|EKMH451VND391MB35T|40�35|B35|0.638|1.57| ||470|EKMH451VND471MB40T|40�40|B40|0.529|1.78| ||560|EKMH451VND561MB50T|40�50|B50|0.444|2.06| ||820|EKMH451VND821MB63T|40�63|B63|0.303|2.66| ||1,200|EKMH451VND122MB80T|40�80|B80|0.207|3.5| **†For construction and terminal options, refer to the part numbering system for descriptions and codes.** - **Refer to diagram of dimensions for detailed case size specifications.** 32 United Chemi-Con, Inc. 1701 Golf Road, 1-1200 Rolling Meadows, IL 60008 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Updated at February 9, 2023
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →