EKMB1304113K

> Currentconsumption **1/2/6μA** 

**Digital output** 

## EKMB（WL）series 

**==> picture [183 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 @<br>Standard detection Long distance detection<br>type type<br>ae<br>Wall installation<br>type<br>**----- End of picture text -----**<br>


- ○Low current consumption for battery-driven applications 

- ○A special differential input circuit design （EKMB 6μA type only） for applications where a high noise resistance is required （up to GHz range）. 

## Recommended applications 

IoT, occupancy sensor module for smart home, battery-driven applications, wireless devices 

Lensless type available 1μA type: EKMB1100100 6μA type: EKMB1300100K 2μA type: EKMB1200100 

## Specifications 

|Detection performance|Model no.<br>~~—~~|Current<br>consumption<br>|<br>~~fo~~|Lens color<br>|<br>~~fo~~|Output type<br>P||Detection<br>distance|Detection area|Detection area|Detection<br>zones|
|---|---|---|---|---|---|---|---|---|
|||||||Horizontal|Vertical||
|Standard detection type<br>~~|~~|EKMB1101111<br>~~—~~|1μA<br>~~fo~~|White<br>~~fo~~|Digital<br>~~——~~<br> <br>~~—~~|5m|94°|82°|64|
||EKMB1101112<br>~~—~~||Black<br>~~fo~~||||||
||EKMB1101113||Pearl white||||||
||EKMB1201111|2μA<br>~~|~~|White||||||
||EKMB1201112||Black||||||
||EKMB1201113<br>~~|~~||Pearl white<br>~~|~~||||||
||EKMB1301111K<br>~~|~~|6μA<br>~~|~~|White<br>~~|~~||||||
||EKMB1301112K<br>~~|~~||Black<br>~~|~~||||||
||EKMB1301113K||Pearl white||||||
|Long distance detection type<br>||EKMB1103111|1μA<br>~~ES~~|White<br>~~ES~~||12m<br>~~i]~~|102°<br>~~i]~~|92°<br>~~i]~~|92|
||EKMB1103112||Black<br>~~ES~~||||||
||EKMB1103113||Pearl white<br>~~ES~~||||||
||EKMB1203111|2μA<br>~~=~~<br>~~==~~|White<br>~~fe~~<br>~~=~~||||||
||EKMB1203112<br>~~==~~||Black<br>~~=~~<br>~~==~~||||||
||EKMB1203113<br>~~==~~||Pearl white<br>~~=~~<br>~~==~~||||||
||EKMB1303111K<br>~~==~~|6μA<br>~~==~~|White<br>~~——~~<br>~~==~~||||||
||EKMB1303112K<br>~~==~~||Black<br>~~——~~<br>~~==~~||||||
||EKMB1303113K<br>~~==~~||Pearl white<br>~~==~~||||||
|Wall installation type<br>|<br>-|EKMB1104111<br>~~==~~|1μA<br>~~==~~<br>~~=~~|White<br>~~==~~<br>~~—~~<br>~~=~~||12m（1st step lens）<br>6m（2nd step lens）<br>3m（3rd step lens）<br>Please refer to page<br>8 for details.<br> ~~i]~~|）<br>40°<br>~~i]~~|105°<br>~~i]~~|68|
||EKMB1104112<br>~~==~~||Black<br>~~==~~<br>~~—~~<br>~~=~~||||||
||EKMB1104113<br>~~==~~||Pearl white<br>~~==~~<br>~~=~~||||||
||EKMB1204111<br>~~==~~|2μA<br>~~==~~|White<br>~~==~~||||||
||EKMB1204112<br>~~==~~||Black<br>~~==~~||||||
||EKMB1204113<br>~~==~~||Pearl white<br>~~==~~||||||
||EKMB1304111K<br>~~==~~|6μA<br>~~==~~<br>~~Z~~|White<br>~~==~~||||||
||EKMB1304112K<br>~~==~~||Black<br>~~==~~||||||
||EKMB1304113K<br>~~==~~||Pearl white<br>~~== ~~||||||



●Lens 

0: Lensless / 1： with lens 

00: Lensless / 01: 5m distance standard / 03: 12m long distance / 04: Wall installation type 

5 

## Characteristics 

## ■Maximum rated values 

**==> picture [511 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Items Value<br>Power supply voltage -0.3 to 4.5V<br>Ambient temperature -20 to +60℃ (No frost, no condensation)<br>Storage temperature -20 to +70℃<br>**----- End of picture text -----**<br>


## ■Electrical Characteristics 

**==> picture [511 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
Items Symbol 1μA type 2μA type 6μA type Conditions<br>Max 4.0V<br>Operating voltage Vdd ー<br>Min 2.3V<br>Current consumption Ambient temperature: 25℃<br>(in standby mode) Ave Iw 1μA 2μA 6μA Iout=0<br>Note 1) Vdd: 3V<br>(during detection period)Output current Max Iout 100μA Ambient temperature: 25Vout≧Vdd-0.5 ℃<br>Note 2)<br>Output voltage Min Vout Vdd‐0.5V Ambient temperature: 25℃<br>(during detection period) Open at no detection<br>Ave 25 sec ー Ambient temperature: 25℃<br>Circuit stability time Twu Iout=0<br>(when voltage is applied) Max 210 sec 10 sec, Note 3) Vdd: 3V<br>**----- End of picture text -----**<br>


Note 1) The total current consumption is equal to the current consumption in standby mode (Iw) plus the output current during detection (Iout). For the 1μA type please note that the average current consumption is 1μA in sleep mode and 1.9μA in standby mode. Please also refer to the timing chart. 

Note 2) Please select an output resistors (pull-down concept) in accordance with Vout so that the output current is lower than or equal to 100μA. If the output current is more than 100μA, this may cause false alarms. 

Note 3) The sensor temperature has to be constant for the time specifi ed. 

## Timing chart 

## ■2μA／6μA type 

## ■1μA type 

**==> picture [512 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON ON<br>Power supply Power supply<br>OFF OFF<br>Present Present<br>Detecting target Detecting target<br>Absent Absent<br>ON 1） Sleep<br>Output voltage Mode 2） Standby Unstable 1） 2） 3） 1） 2） 3） 1） 2） 3）<br>3） Mask<br>OFF<br>Twu<br>ON<br>【Explanation of the timing】 Output voltage<br>Twu: Circuit stability time: about 25 sec (typ.) for 2μA type, max. 10 sec for 6μA type. OFF<br>        While the circuitry is stabilizing after the power is turned on, the sensor<br>        output is not fi xed in the ON or OFF state. This is true regardless of t1（Twu） t2 t3 t2 t3 t2<br>        whether or not the sensor has detected anything.<br>※2 ※1<br>**----- End of picture text -----**<br>


- 【Explanation of the timing】 

- 【Explanation of modes】 

- 1）Sleep mode:    When the output is OFF. The electrical current consumption is around 1μA. 

- 2) Standby mode: After the sensor's output has reached ON status, the sensor switches to standby mode. The electrical current consumption gets close to 1.9μA . When the sensor's output returns to its OFF value after the "hold time" has expired, the sensor switches again to sleep mode. 

- 3) Mask mode:     Time during which the output is forced to OFF status after the end of the standby mode. (No detection is possible during this period.) 

- 【Explanation of the timing】 

- t1 (Twu): Circuit stability time: about 25 sec (typ.) 

- While the circuitry is stabilizing after the power is turned on, the sensor output is not fi xed in the ON or OFF state. This is true regardless of whether or not the sensor has detected anything. 

- t2:          Standby hold time: about 2.6 sec (typ.) after the last detection of a signal. (※１) t3:          Mask time: about 1.3 sec (typ.) During this stage, even if the sensor detects something, the output will not switch to ON.（※２） 

6 

## Lenses for the EKMB/EKMC series 

**==> picture [514 x 765] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimension Detection zone Detection characteristics<br>（mm）<br>Y<br>Standard  5m<br>detection type (48.5°）41° Y<br>2.5m Detection<br>_ ® φ9.5 »Lig rate ae OO | oo distance Max. 5m<br>CAD data<br>A A 13 14.4 X 5.6m Field of view 94°×82°<br>φ0.45 =) =: Tt sc ss sc0n<br>±0.05 φ11 4.6 =Qo 00 oeye] =o|o \ = 0a 20 Detectionzone 64 beams<br>VDD POR (48.5°）41° BO X-Y Cross Section 00:00 6.6m oo Detectioncondition ・ between the target and the The temperature difference<br>GND OUT SIDE VIEW  surroundings must be higher  than 4℃.<br>・Movement speed: 1.0m/s<br>- < TS Cc X (53 47°）° WZ 47(5 3°）° ・ body with an approx. size of  700Target concept: Human ×250mm<br>A-A Cross sectional ・Target moving direction:<br>TOP VIEW  Crossing the detection beam.<br>5m 2.5m<br>Y<br>12m<br>Long distance  (49.5°）46.3°<br>detection type o> Y<br>22 5m Detection Max. 12m<br>CAD data φ20.7 distance<br>X 11.6m Field of view 102°×92°<br>A A 20.2 <]) Zuma Detection<br>7.3 92 beams<br>φ0.45 [±0.05] 4.6 zone<br>φ11 VDD2.5 5 (49.5°）46.3° X-Y Cross Section13.8m Detectioncondition ・ between the target and the  surroundings must be higher than 4The temperature difference ℃.<br>GND OUT SIDE VIEW (545 °）1.3° 51.3(5 4°）° ・・Movement speed: 1.0m/sTarget concept: Human<br> body with an approx. size of<br>X  700×250mm<br>・Target moving direction:<br>TOP VIEW  Crossing the detection beam.<br>A-A Cross sectional 12m 5m<br>Wall installation  Detection 1st step lens Max. 12m<br>type Y distance<br>2nd step lens Max. 6m<br>— CAD data A φ20.7φ22 D A 20.2 — S= 18254 ° °° oval 14.9m   5.7m 2nd step3rd step1st step Field of view 3rd step lens40°×105°Max. 3m<br>φ0.45 [±0.05] 7.34.6 5m （49°）44°12m X-Y Cross Section Detectionzone 68 beams<br>= φ11 _ | SIDE VIEW Detection ・The temperature difference<br>VDD condition  between the target and the<br>52.5° 52.5°  surroundings must be higher<br>2.5 5 （56°） （56°）  than 4℃.<br>GND OUT X 5m ・Movement speed: 1.0m/s<br>・Target concept: Human<br>TOP VIEW 12m  body with an approx. size of  700×250mm<br>・Target moving direction:<br>(2) 2<br> Crossing the detection beam.<br>A-A Cross sectional<br>■PIR element<br>Lensless type coo 3.0<br>Na s, 0.6mm<br>3.0 0.4mm Detection  Average: 5.6μW/c㎡<br>φ9.1φ8.3 0.6mm sensitivity Maximum: 7.6μW/c㎡<br>o ELEMENT + e L |6—ChLhuVKhmm<br>0.6mm 0.6mm ※Detection sensitivity is measured by following system<br>0.4mm<br>8.4 9.3<br>. φ0.45 iLiad [±0.05] na 5.5 ■Test setup<br>| —| | | Black body250℃ φ3.2mmAperture Maskingplate PaPIRs<br>VDD<br>DC5V<br>GND OUT 340mm Recorder<br>Chopper（1Hz）<br>CAD data CAD data can be downloaded from the                    PaPIRs WEB site. Panasonic PaPIRs Search<br>aGu=D (PaPIRs)) ee |<br>Please refer to the formal specifi cation for the dimension, and the tolerance  ※Please note that the horizontal and vertical fi eld of view depends on the position of the metal tab on which the lens is mounted.<br>P.C.D.φ5.08 ±0.2<br>45°<br>45°<br>55°<br>45°<br>±4°<br>±4°<br>±4°<br>45°±4<br>P.C.D.φ5.08±0.2<br>45°<br>45°<br>45°<br>45°<br>±4<br>±4°<br>±4°<br>±4°<br>±0.2<br>±0.2<br>P.C.D.φ5.08<br>P.C.D.φ5.08<br>**----- End of picture text -----**<br>


8 

## 

||**Standard and slight-motion detection type**<br>ø4.4m<br>**Slight motion**<br>**detection area**<br>&|**Standard and slight-motion detection type**<br>ø4.4m<br>**Slight motion**<br>**detection area**<br>&|**Standard and slight-motion detection type**<br>ø4.4m<br>**Slight motion**<br>**detection area**<br>&|**Standard and slight-motion detection type**<br>ø4.4m<br>**Slight motion**<br>**detection area**<br>&|**Standard and slight-motion detection type**<br>ø4.4m<br>**Slight motion**<br>**detection area**<br>&|
|---|---|---|---|---|---|
|**Choose by the current**<br>**consumption in standby mode**<br>(1μA type: in sleep mode)|**1μA**|**2μA**|**6μA**|**170μA**||
|**Choose by output**||||**Digital**||
|||**Digital**|||**Analog**|
|||||||
|**White**<br>**Black**<br>**Pearl white**<br>**Choose by**<br>**lens color**|EKMB1193111|EKMB1293111|EKMB1393111K|EKMC1693111|By request|
||EKMB1193112|EKMB1293112|EKMB1393112K|EKMC1693112|By request|
||EKMB1193113|EKMB1293113|EKMB1393113K|EKMC1693113|By request|



## **Saturn lens** 

**==> picture [493 x 272] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimension Detection zone Detection characteristics<br>(mm)<br>Detection<br>Standard and slight- Max. 2.2m*<br>motion detection type Vertical Slight motion Standard motion distanceField of  Slight motion 44° x 44°<br>detection area detection area view Standard motion 90° x 90°<br>CAD data by request Detection  Slight motion 36<br>ar Pas X. zone Standard motion 48<br>14.9<br>14.1  Detection Slight motion •  The temperature<br>2 YA (OG \-4 condition  ▲ difference between the target and the<br>surroundings must be<br>higher than 4°C.<br>A A •  Movement speed: 0.5ms<br>•  Target concept: Human<br>0.45 ±0.05  (0.018 dia) head with an approx. size of 200x200mm<br>=poe g | | aie(45°) 4 7 “isnalo? •  Target moving direction:<br>11  2.2m Crossing the detection beam, 1 zone<br> P.C.D @ 5.08 ±0.2  VDD (45°) 41° 41445") Standard motion •  The temperature difference between the<br>target and the<br>i Hl W/Z surroundings must be higher than 4°C.<br>GND WH OUT SY •  Movement speed: 1.0ms<br>•  Target concept: Human<br>Horizontal body with an approx. size<br>of 400x200mm<br>i •  Target moving direction:<br>Crossing the detection<br>TS beam, 2 zones<br>aaiine’ * [Under specified detection conditions]<br>SSIBg,ouS, ▲ Please refer to “Caution for use” (page 13) and “Basic principles”(page 13, point 5), for more details<br>45° ±4° 45° ±4°<br> 17.2<br> 7.9<br> 4.6<br> 2   4.5<br>**----- End of picture text -----**<br>