EI5515NPAP

## **Proximity Sensors Inductive Flat pack Polycarbonate Housing Types EI 5510/EI 5515, DC-Types** 

- **Sensing distance 10 or 15 mm** 

- **Flush and non-flush types** 

- **Rated operational voltage: 10 to 40 VDC** 

- **Output: DC 200 mA, NPN or PNP** 

- **Normally open and normally closed function** 

- **LED indication for output ON** 

- **Inductive, Capacitive and Photoelectric flat pack series in PC housing, IP 67** 

- **Cable and plug versions** 

## **Product Descri tion p** 

## **Ordering Key EI 55 10 NPA P-1** 

Inductive proximity switch (W x H x D) 35 x 55 x 15 mm **Type** with sensing distance 10 made in polycarbonate. **Housing** mm flush mounted in metal Easy mounting with only two **Range** or 15 mm non-flush mountM 3.5 screws. Ideal for use **Output type** ed. 4-wire with both make in conveying and material **Housing material** (NO) and break (NC) switchhandling applications. **Connection type** ing. Flat pack housing size 

## **T e Selection yp** 

**Housing Rated Ordering no.             Ordering no.                Ordering no. Ordering no. diameter                   operating NPN/cable NPN/plug                     PNP/cable            PNP/plug W x H x D                   dist. (Sn) NO & NC                    NO & NC                        NO & NC                 NO & NC** 35 x 55 x 15 mm 10 mm[1)] **EI 5510 NPAP           EI 5510 NPAP-1           EI 5510 PPAP EI 5510 PPAP-1** 35 x 55 x 15 mm 15 mm[2)] **EI 5515 NPAP           EI 5515 NPAP-1           EI 5515 PPAP EI 5515 PPAP-1** 

1) For flush mounting in metal                                 2) For non-flush mounting in metal 

## **S ecifications p** 

|**Rated operational volt.**|**Rated operational volt.**(Ue)       12 to 36 VDC|)       12 to 36 VDC|
|---|---|---|
||(UB) 10 to 40 VDC|10 to 40 VDC|
|||(ripple included)|
|**Ripple**||≤10%|
|**Rated operational current**(Ie)||)|
|Continuous||≤200 mA|
|**No-load supply current**<br>**Voltage drop **(Ud)  <br>**Protection**Re verse polarity,<br>short-circuit<br>**Power ON delay**|**current**(Io)  <br> <br>Re verse polarity,<br>short-circuit<br>|≤7 mA<br> ≤2 VDC at max. load<br>Re verse polarity,<br>short-circuit<br> ≤50 ms|
|**Frequency of operating**<br>**cycles**(f) **EI 5510**<br>**EI 5515**|**Frequency of operating**<br>**EI 5510** 500 Hz<br>**EI 5515** 250 Hz|500 Hz<br>250 Hz|
|**Indication for output ON**LED||LED, yellow|
|**Assured operating dist.**<br>**Repeat accuracy **(R)  <br>**Hysteresis**(H)<br>(Differential travel)|**dist.**(Sa)  <br> <br>|0≤Sa≤0.81 Sn <br> ≤5%<br> 1 to 15% of sensingdistance|
|**Effective operating dist.**(Sr)||0.9 x Sn≤Sr≤1.1 x Sn|
|**Usable operating dist.**(Su)        0.9 x S||)        0.9 x Sr≤Su≤1.1 x Sr|



|**Ambient temperature**||
|---|---|
|Operating|-25° to +70°C (-13° to +158°F)|
|Storage|-30° to +80°C(-22° to +176°F)|
|**Degree ofprotection**IP 67|IP 67(Nema 1,3,4,6,13)|
|**Housing**||
|Dimensions|35 x 55 x 15 mm|
|Material                                     Pol|Material                                     Polycarbonate, grey|
|**Cable**|**Cable**2 m, 4 x 0.3 mm2|
||greyPVC,oilproof|
|**Weight**||
|Cable version 125 g|125 g|
|Plugversion                              40|version                              40g|
|**EMC ratings**|**EMC ratings**Acc. to EN 50 082-2|
|ENV 50 140 RF Electromagnetic||
|field AM, 80-1000 MHz, Level 310 V/m|10 V/m|
|ENV 50 204 RF Electromagnetic||
|field PM, 80-900 MHz, Level 3|field PM, 80-900 MHz, Level 310 V/m|
|EN 61000-4-4 Fast transient||
|Rep. freq. 5 kHz,Level 3 1 kV|1 kV|
|**Approvals**UL|UL,CSA|
|**CE-marking**Yes|Yes|



**1** 

Specifications are subject to change without notice (17.01.14) 

**EI 5510/EI 5515** 

## **Dimensions** 

**==> picture [453 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED<br>EI 551. .PAP EI 551. .PAP-1<br>LED<br>a<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [120 x 77] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN<br>2 WH<br>4 BK<br>3 BU<br>NPN<br>**----- End of picture text -----**<br>


**==> picture [120 x 79] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN<br>4 BK<br>2 WH<br><><br>PNP 3 BU<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [437 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch pow-<br>er cables from any other power cables, e.g.<br>motor, contactor or solenoid cables<br>Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Accessories** 

- Plugs CONH1A.. series, please refer to "Accessories". 

## **Deliver Contents y** 

- Inductive switch: EI 551. .... 

- **Packaging:** plastic bag 

**2** 

Specifications are subject to change without notice (17.01.14)