EFX2S30K475D132LH

Technical Data **ELX1258** 

Effective June 2023 

## EFX2S 

## Metalized polypropylene film EMI suppression capacitors 

## **Applications** 

- Class X2 for interference suppression 

- EMI filtering in across-the-line applications 

- Solar inverter 

- UPS 

- AC Motor drive 

- Air conditioner 

- Switch mode power supplies (SMPS) 

## **Product features** 

- High stability of capacitance 

- Self-healing property 

- Over voltage stress withstanding 

- Flame-retardant plastic case and resin 

## **Environmental compliance and general specifications** 

- Operating temperature range: -40 °C to +110 °C 

- **Pb** 

- SO RoHS 

## **Agency information** 

|**Approval mark**|**Standard**||**File number**|
|---|---|---|---|
|cALis|UL 60384-14<br>CAN/CSA-E60384-14||E529574|
|Kiois|IEC 60384-14:2013<br>IEC 60384-14:2013/AMD1:2016||40055954|
||IEC 60384-14:2013+AMD1:2016||CQC22001363202|
||CQC11-471112-2015|||



EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Part number system** 

|**EF**||**X2**||**S**||**30**||**K**||**104**||**B01**||**2L**||**H**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**Capacitor**||||||**Voltage**||||**Capacitance**||**Size**||**Terminal**||**Lead**|
|**type**||**Family**||**Grade**||**(Vac)**||**Tolerance**||**(pF)**||**code**||**code**||**length code**|
|||||||||||First two digits=|||||||
|EF = film<br>capacitors||X2||S = standard||30 = 305||K = ±10%<br>M = ±20%||significant figures, third<br>digit = number of zeros||Refer to size<br>code table||Refer to terminal<br>code table||Refer to lead<br>length code<br>table|
|||||||||||example: 104 = 100000 pF|||||||



## **Terminal code table** 

## **Lead length code table** 

|**Digit one**|||**Digit two**|||
|---|---|---|---|---|---|
|**(Lead/terminal type)**|||**(Lead Ipsilateral)**|||
|Straight cut|2||N/A|L||
|Taping straight|V||-|-||



|**Lead length**|||
|---|---|---|
|3.0±0.5 mm (Bulk)|D||
|3.5±0.5 mm (Bulk)|E||
|4.0±0.5 mm (Bulk)|F||
|4.5±0.5 mm (Bulk)|G||
|5.0±0.5 mm (Bulk)|H||
|25±2 mm (Ammo)|T||



## **Dimensions-mm** 

## **Part marking** 

**==> picture [27 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family<br>**----- End of picture text -----**<br>


2 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Size code table** 

|**Size**|**Dimension**|**Pitch**|**Lead wire**|**Lead**<br>**length**|
|---|---|---|---|---|
|**Code**|**W**<br>**Tolerance**<br>**(±)**<br>**H**<br>**Tolerance**<br>**(±)**<br>**T**<br>**Tolerance**<br>**(±)**|**P**<br>**Tolerance**<br>**(±)**|**Ød**<br>**Tolerance**<br>**(±)**|**L**|
|B01|18<br>0.5<br>11<br>0.5<br>5<br>0.5|15<br>0.5|0.6<br>0.05|Refer to<br>Lead Length<br>Code Table,<br>Pitch 27.5<br>and 37.5<br>without<br>Ammo<br>package|
|B02|18<br>0.5<br>12<br>0.5<br>6<br>0.5|15<br>0.5|0.6<br>0.05||
|B07|18<br>0.5<br>13.5<br>0.5<br>7.5<br>0.5|15<br>0.5|0.8<br>0.05||
|B09|18<br>0.5<br>14.5<br>0.5<br>8.5<br>0.5|15<br>0.5|0.8<br>0.05||
|B11|18<br>0.5<br>16<br>0.5<br>10<br>0.5|15<br>0.5|0.8<br>0.05||
|B16|18<br>0.5<br>19<br>0.5<br>11<br>0.5|15<br>0.5|0.8<br>0.05||
|C02|26<br>0.5<br>16.5<br>0.5<br>7<br>0.5|22.5<br>0.5|0.8<br>0.05||
|C04|26<br>0.5<br>19<br>0.5<br>10<br>0.5|22.5<br>0.5|0.8<br>0.05||
|C05|26<br>0.5<br>20<br>0.5<br>11<br>0.5|22.5<br>0.5|0.8<br>0.05||
|C06|26<br>0.5<br>22<br>0.5<br>12<br>0.5|22.5<br>0.5|0.8<br>0.05||
|C07|26<br>0.5<br>23<br>0.5<br>13<br>0.5|22.5<br>0.5|0.8<br>0.05||
|C10|26<br>0.5<br>29.5<br>0.5<br>14.5<br>0.5|22.5<br>0.5|0.8<br>0.05||
|D02|32<br>0.8<br>18<br>0.8<br>9<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D03|32<br>0.8<br>20<br>0.8<br>11<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D05|32<br>0.8<br>24<br>0.8<br>14<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D06|32<br>0.8<br>24.5<br>0.8<br>13<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D09|32<br>0.8<br>28<br>0.8<br>18<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D12|32<br>0.8<br>33<br>0.8<br>18<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D13|32<br>0.8<br>37<br>0.8<br>22<br>0.8|27.5<br>0.5|0.8<br>0.05||
|D14|32<br>0.8<br>31<br>0.8<br>23<br>0.8|27.5<br>0.5|0.8<br>0.05||
|E10|42<br>1<br>32<br>1<br>19<br>1|37.5<br>0.5|1<br>0.05||
|E11|42<br>1<br>37<br>1<br>22<br>1|37.5<br>0.5|1<br>0.05||
|E14|42<br>1<br>43<br>1<br>28<br>1|37.5<br>0.5|1<br>0.05||
|E16|42<br>1<br>45<br>1<br>30<br>1|37.5<br>0.5|1<br>0.05||



P=15/22.5 case color is gray, P=27.5/37.5 case color is black. 

3 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Rating and part number** 

## **Rated voltage 305 Vac/630 Vdc** 

||**Dimensions**||
|---|---|---|
|**Capacitance**<br>**value**<br>**(µF)**|**W**<br>**(mm)**<br>**H**<br>**(mm)**<br>**T**<br>**(mm)**<br>**P**<br>**(mm)**|**Peak current**<br>**(A)**<br>**Surge current**<br>**(A)**<br>**dv/dt**<br>**(V/µs)**<br>**Part number1**|
|0.1|18<br>11<br>5<br>15|40<br>120<br>400<br>EFX2S30K104B012LH|
|0.15|18<br>12<br>6<br>15|60<br>180<br>400<br>EFX2S30K154B022LH|
|0.22|18<br>13.5<br>7.5<br>15|88<br>264<br>400<br>EFX2S30K224B072LH|
|0.27|18<br>14.5<br>8.5<br>15|108<br>324<br>400<br>EFX2S30K274B092LH|
|0.33|18<br>14.5<br>8.5<br>15|132<br>396<br>400<br>EFX2S30K334B092LH|
|0.47|18<br>16<br>10<br>15|188<br>564<br>400<br>EFX2S30K474B112LH|
|0.56|18<br>19<br>11<br>15|224<br>672<br>400<br>EFX2S30K564B162LH|
|0.68|18<br>19<br>11<br>15|272<br>816<br>400<br>EFX2S30K684B162LH|
|0.33|26<br>16.5<br>7<br>22.5|66<br>198<br>200<br>EFX2S30K334C022LH|
|0.47|26<br>16.5<br>7<br>22.5|94<br>282<br>200<br>EFX2S30K474C022LH|
|0.56|26<br>19<br>10<br>22.5|112<br>336<br>200<br>EFX2S30K564C042LH|
|0.68|26<br>19<br>10<br>22.5|136<br>408<br>200<br>EFX2S30K684C042LH|
|1.0|26<br>20<br>11<br>22.5|200<br>600<br>200<br>EFX2S30K105C052LH|
|1.2|26<br>22<br>12<br>22.5|240<br>720<br>200<br>EFX2S30K125C062LH|
|1.5|26<br>23<br>13<br>22.5|300<br>900<br>200<br>EFX2S30K155C072LH|
|1.8|26<br>29.5<br>14.5<br>22.5|360<br>1080<br>200<br>EFX2S30K185C102LH|
|2|26<br>29.5<br>14.5<br>22.5|400<br>1200<br>200<br>EFX2S30K205C102LH|
|2.2|26<br>29.5<br>14.5<br>22.5|440<br>1320<br>200<br>EFX2S30M225C102LH*|
|0.68|32<br>18<br>9<br>27.5|102<br>306<br>150<br>EFX2S30K684D022LH|
|0.82|32<br>18<br>9<br>27.5|123<br>369<br>150<br>EFX2S30K824D022LH|
|1.0|32<br>20<br>11<br>27.5|150<br>450<br>150<br>EFX2S30K105D032LH|
|1.2|32<br>20<br>11<br>27.5|180<br>540<br>150<br>EFX2S30M125D032LH*|
|1.5|32<br>24.5<br>13<br>27.5|225<br>675<br>150<br>EFX2S30K155D062LH|
|1.8|32<br>24.5<br>13<br>27.5|270<br>810<br>150<br>EFX2S30K185D062LH|
|2.2|32<br>24<br>14<br>27.5|330<br>990<br>150<br>EFX2S30K225D052LH|
|2.7|32<br>28<br>18<br>27.5|405<br>1215<br>150<br>EFX2S30K275D092LH|
|3.3|32<br>33<br>18<br>27.5|495<br>1485<br>150<br>EFX2S30K335D122LH|
|3.9|32<br>31<br>23<br>27.5|585<br>1755<br>150<br>EFX2S30K395D142LH|
|4.7|32<br>37<br>22<br>27.5|705<br>2115<br>150<br>EFX2S30K475D132LH|
|4.7|42<br>32<br>19<br>37.5|470<br>1410<br>100<br>EFX2S30K475E102LH|
|5.6|42<br>32<br>19<br>27.5|560<br>1680<br>100<br>EFX2S30K565E102LH|
|6.8|42<br>37<br>22<br>37.5|680<br>2040<br>100<br>EFX2S30K685E112LH|
|10|42<br>43<br>28<br>37.5|1000<br>3000<br>100<br>EFX2S30K106E142LH|
|12|42<br>45<br>30<br>37.5|1200<br>3600<br>100<br>EFX2S30K126E162LH|
|15|42<br>45<br>30<br>37.5|1500<br>4500<br>100<br>EFX2S30K156E162LH|



1. Standard part numbers listed---addition confirgurations available for tolerance, terminal and lead length. See part number system for available tolerances and terminal and lead length tables for available options. 

- *Only available in M = 20% tolerance, otherwise both K =10% and M = 20% available 

4 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **General information** 

**==> picture [512 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Application|Interference suppression \ Across-the-line (Class X2)|
|Dielectric|Metallized Polypropylene Film|
|Reference standard|IEC 60384-14; UL 60384-14; GB/T 6346.14-2015|
|Climatic category|40/110/56 IEC60068-1|
|Passive flammability class|B|
|Operating temperature range|-40 °C to +110 °C|
|Protection|Solvent resistant plastic case UL94 V-0, Thermosetting resin sealing UL 94V-0 compliant|
|Installation|Any position|
|Packaging|Packed in cardboard boxes with protection for the terminals|
|Storage conditions|Storage time: ≤24 months from the date marked on the label package, Average relative humidity per year ≤70%, RH≤85% for 30 days|
|randomly distributed throughout the year, Dew is absent, Temperature: -40°C ~ +85°C|
|RoHS compliant|Compliant with the restricted substance requirements of Directive 2011/65/EU|
|Flame retardant grade|Flame retardant performance accords with horizontal combustion grade HB and vertical combustion grade V-0|

**----- End of picture text -----**<br>


## **Construction** 

**==> picture [267 x 84] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Metallized film|OPP & Al/Zn|
|Metal sprayed|Sn/Zn Alloy|
|Connection electrode|(0.6 mm to 0.8 mm) Tinned copper clad steel wire|
|(1.0 mm to 1.2 mm) Tinned copper wires|
|Plastic case|Plastic case (UL94V-0)|
|Filling|Epoxy resin (UL94V-0)|
|Mono structure|

**----- End of picture text -----**<br>


Film construction 

**==> picture [401 x 243] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Electrical and general characteristics|
|Voltage range (UR)|305 Vac 50/60 Hz|
|Recommended DC voltage|630 Vdc|
|Capacitance range|0.1 μF to 15.0 μF|
|Capacitance tolerance|±10% or ±20% at +20 °C|
|Capacitance|Measuring frequency at 1 kHz, +20 °C|
|Measuring voltage: 1 ±0.2 V|
|Standard atmospheric conditions for static test|Ambient temperature +15 °C to +35 °C|
|Relative humidity 45% to 75%|
|Air pressure 86 kPa to 106 kPa.|
|Withstanding  DC voltage between terminals UTT|DC Voltage: 4.3 x U*The UR in this DC test is the rated AC voltage valueR* for 60 seconds (at +20 ±2 °C)|
|Withstanding AC voltage between terminal and case UTC|2UR + 1500 Vac, 60 s (at +20+/-2°C)|
|Dissipation factor|≤20 * 10|[-4]|at 10 kHz. (C ≤ 1 μF) at +20 °C|
|≤10 * 10|[-4]|at 1 kHz. (C > 1 μF) at +20 °C|
|Insulation resistance|R between leads, for C ≤ 0.33 μF at 100 V, +20 °C; 1 minute > 15 000 MΩ|
|RC between leads, for C > 0.33 μF at 100 V, +20 °C; 1 minute > 5000 MΩ * μF|
|Life expectancy|100,000 hours (UR hotspot = +85 °C) (|C/C≤10%)|
|Failure rate|100 FIT|
|Maximum altitude|2000 m|

**----- End of picture text -----**<br>


5 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Charcteristics curves** 

## **Maximum voltage (Vrms) vs frequency** 

**Maximum current (Irms) vs frequency** 

6 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Charcteristics curves** 

## **Expected life curve** 

**==> picture [10 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
Expected lifetime (hours)<br>**----- End of picture text -----**<br>


**Ratio: (Working AC voltage/rated AC voltage** 

## **Impedance vs frequency** 

**==> picture [208 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
10.0000<br>|<br>i<br>ee<br>0.1000<br>0.0100<br>0.1 1.0 10.0<br>Frequency (kHz)<br>Z (ohm)<br>**----- End of picture text -----**<br>


7 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Environmental test** 

|**Environmental test**|||
|---|---|---|
|**Test**|**Test condition**|**Performance**|
|||Capacitance change rate  (   C/C) : ≤±10%<br>A|
||Test temperature: +40 ±2 °C|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A6|
|Damp heat loading|Test humidity: 90% to 95% R.H.<br>Test Duration: 1000 +24/-0 hours|DF change (   tg  ): : ≤50 * 10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A8|
||Loading voltage: Rated voltage|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|||Capacitance change rate  (   C/C) : ≤±5%<br>A|
||Testing method per IEC 60068-2-14 Na|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A8|
|Rapid temperature change|Test temperature cycle: Total 5 cycles<br>High temperature: +110 ±5 °C for 30 minutes|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A8|
||Low temperature: -40 ±5 °C for 30 minutes|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
||Testing method per IEC 60384-14|Capacitance change rate  (   C/C) : ≤±10%<br>A|
||Test Temperature: +110 ±2 °C.|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A<br>6|
||Apply 125% of rated voltage for 1,000 +24/-0 hours; Each of|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>As|
|High temperature loading|these voltages shall be applied to each capacitor individu-|Insulation resistance: ≥50% of initial limit|
||ally through a resistor of 47 Ω ±5%. Once every hour the<br>voltage is increased to 1.5UR or 1000 V rms, whichever is<br>higher, for 0.1 seconds.|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|||Capacitance change rate  (   C/C) : -0 to -5%<br>A|
|||DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A<br>6|
|High temperature features|Test Temperature: +110 ±2 °C<br>Test Duration:  16 +1/-0 hours|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>Ad|
|||(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|||Capacitance change rate  (   C/C) : +0 to +5%<br>A|
|||DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A8|
|Low temperature features|Test Temperature: -40 ±2 °C<br>Test Duration: 2 +1/-0 hrs.|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A6|
|||(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|||More than 95% of circumferential surface of lead wire shall|
||Testing method per IEC 60068-2-20 Ta|be covered with new solder.|
|Solderability|Soldering temperature: +245 ±5 °C|Insulation Resistance: ≥50% of initial limit|
||Immersion duration: 2 +/-0.5 seconds|(T-T) test voltage: 4.3 UR(dc) /60s<br>(T-C) test voltage: 2 UR+ 1500 V (ac) /60 s|
||Flow soldering:|Capacitance change rate (ΔC/C): ≤±2%|
||Preheat temperature +100 °C to +120 °C|DF change (Δtgδ): ≤80*10-4 at 10 kHz. (C ≤ 1 μF)|
|Soldering heat resistance|Preheat Duration: 100 seconds maximum<br>Soldering Temperature: +260 ±5 °C|DF change (Δtgδ): ≤50*10-4 at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit|
||Immersion Duration: ≤10 seconds|(T-T) test voltage: 4.3 UR (dc)/60 s|
||Immersion Depth: 1.5 +/- 0.5 mm from roots.|(T-C) test voltage: 2 UR + 1500 V (ac) /60 s|
||Test Temperature Cycle: Total 5 cycles|Capacitance change rate  (   C/C) : ≤±-5%<br>A|
||Each cycle includes:|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A<br>6|
||1. +20 ±2 °C for 3 minutes|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Ad|
|Temperature cycle|2. -40 +0/-3 °C for 30 minutes|Insulation resistance: ≥50% of initial limit|
||3. +20 ±2 °C for 3 minutes<br>4. +110 +3/-0 °C for 30 minutes<br>5. +20 ±2 °C for 3 minutes|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|||Capacitance change rate  (   C/C) : ≤±5%<br>A|
||Testing method per IEC 60068-2-3 Ca|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A8|
|Humidity resistance|Test Temperature: +40 +/-2°C<br>Test Humidity: 90% to 95% R.H.|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A8|
||Test Duration: 1344 +24/-0 hours|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|**Electrical test**|||
|**Test**|**Test condition**|**Performance**|
||10000 cycles Charge to √2 x UR(DC)|Capacitance change rate  (   C/C) : ≤±5%<br>A|
||Charge resistance:|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A8|
|Charge and discharge|Discharge resistance:<br>220<br>x 106<br>RQ —= -<br>Cn|DF change (   tg  ): : ≤50 * 10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s<br>A8|
||-<br>V2x Ur (DC)<br>R<br>1.25 x C(dv/dt) o||
||3 successive impulses, full wave, peak voltage:||
|Impulse voltage|X2: 2.5 kV for C ≤ 1 μF<br>X2: 2.5 kV/√C for C > 1 μF|No self-healing breakdowns or flashover|
||24 pulses maximum||



8 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Mechanical test** 

|**Mechanical test**|||
|---|---|---|
|**Test**|**Test condition**|**Performance**|
||IEC 60068-2-45 test XA method 1|Capacitance change rate  (   C/C) : ≤±1%<br>A|
||Solvent: propanol (isopropyl-alcohol)|DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>A8|
|Resistance to solvent|Temperature: +23 ±5°C<br>Immersion time: 5 ±0.5 minutes|DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A8|
||Drying time: 5 minutes<br>Mechanical treatment: 10 rubbing (with cotton-wool)|(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
||Tension:||
||0.50 < D ≤0.80, 10N||
||0.80 < D ≤1.25, 20N||
|Terminal strength|Bending test :<br>Bending force:|No visible damage to appearance|
||0.50 < D ≤0.80, 5N||
||0.80 < D ≤1.25, 10N||
||Make two successive bends in each direction||
|Vibration resistance|Testing method per IEC 60068-2-6 Fc.<br>Frequency Change: 10—55—10 Hz.<br>Vibration Distance : 1.5 mm<br>Test Direction : X, Y, Z<br>Test Duration: 2 +1/- 0 hours each direction|Capacitance change rate  (   C/C) : ≤±3%<br>DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s<br>A<br>A<br>8<br>Ad|
|Bump|1000 times, Acceleration: 400 m/s2<br>Pulse duration: 6 ms|Capacitance change rate  (   C/C) : ≤±3%<br>DF change (   tg  ): : ≤80*10-4at 10 kHz. (C ≤ 1 μF)<br>DF change (   tg  ): : ≤50*10-4at 1 kHz. (C > 1 μF)<br>Insulation resistance: ≥50% of initial limit<br>A<br>A6<br>A<br>6|
|||(T-T) test voltage: 4.3 UR(dc)/60 s<br>(T-C) test voltage: 2 UR+ 1500 V (ac)/60 s|
|**Flammability test**|||
|**Test**|**Test condition**|**Performance**|
|Passive flammability class B|Bore of gas jet: Ø 0.5 mm   Fuel: Butane|After removing test flame from capacitor, the capacitor must|
||Test duration for actual volume V in mm3:|not continue to burn for more than 10 s.|
||V ≤ 250: 10 s|No burning particle must drop from the sample.|
||250 < V ≤ 500: 20 s||
||500 < V ≤1750: 30 s||
||V > 1750: 60 s||
||One flame application||
|Active flammability|20 cycles of 2.5 kV discharges on the test capacitor|The cheese cloth around the capacitors shall not burn with|
||connected to UR|a flame. No electrical measurements are required.|



9 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Packaging information** 

|**Pitch**|**SIze**|**Dimension**|**Package quantity**|
|---|---|---|---|
|**mm**|**Code**|**W**<br>**H**<br>**T**|**Bulk pack/box**<br>**Ammo pack/box**|
|15|B01|18<br>11<br>5|1,054<br>680|
||B02|18<br>12<br>6|867<br>560|
||B07|18<br>13.5<br>7.5|697<br>450|
||B09|18<br>14.5<br>8.5|612<br>390|
||B11|18<br>16<br>10|527<br>340|
||B16|18<br>19<br>11|476<br>300|
|22.5|C02|26<br>16.5<br>7|528<br>300|
||C04|26<br>19<br>10|372<br>210|
||C05|26<br>20<br>11|336<br>190|
||C06|26<br>22<br>12|300<br>170|
||C07|26<br>23<br>13|276<br>160|
||C10|26<br>29.5<br>14.5|252<br>140|
|27.5|D02|32<br>18<br>9|340<br>NA|
||D03|32<br>20<br>11|280<br>NA|
||D05|32<br>24<br>14|220<br>NA|
||D06|32<br>24.5<br>13|230<br>NA|
||D09|32<br>28<br>18|170<br>NA|
||D12|32<br>33<br>18|170<br>NA|
||D13|32<br>37<br>22|140<br>NA|
||D14|32<br>31<br>23|130<br>NA|
|37.5|E10|42<br>32<br>19|112<br>NA|
||E11|42<br>37<br>22|98<br>NA|
||E14|42<br>43<br>28|77<br>NA|
||E16|42<br>45<br>30|70<br>NA|



10 

www.eaton.com/electronics 

EFX2S Metalized polypropylene film EMI suppression capacitors 

Technical Data ELX1258 Effective June 2023 

## **Wave solder profile** 

## **Profile feature** 

|Preheat                    • Ts maximimum|Preheat                    • Ts maximimum||110 °C|
|---|---|---|---|
||• Ts minimum||NA|
||• ts||< 150 seconds|
|Soldering                    • Tp|Soldering                    • Tp||260 °C ±5 °C|
||• tp||< 10 seconds|
||• tl||≤60 seconds|



## _**Capacitor body maximum temperature at wave soldering ≤120 °C**_ 

## **Manual solder** 

+400 °C, 3 seconds maximum by soldering iron, generally manual, hand soldering is not recommended 

Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 

Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. 

## **Eaton** 

**Electronics Division** 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com/electronics © 2023 Eaton Follow us on social media to get the All Rights Reserved Eaton is a registered trademark. latest product and support information. Printed in USA Publication No. ELX1258 BU-ELX22122a All other trademarks are property June 2023 of their respective owners. ]yqinjo