Image not available
Illustrative purposes only
EDR-75-12
AC/DC DIN Rail Power Supply (PSU), ITE, 1 Output, 75.6 W, 12 VDC, 6.3 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type:
- SVHC: No SVHC (25-Jun-2025)
- Product Range: EDR-75 Series
- No. of Outputs: 1 Output
- Output Power Max: 75.6W
- Current, Output 4: -
- Input Voltage VAC: 90V AC to 264V AC
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 6.3A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Voltage - Output 1: 12VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 28.41 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
75W Single Output Industrial DIN RAIL EDR- ~~7~~ 5 series **==> picture [45 x 154] intentionally omitted <==** **----- Start of picture text -----**<br> Se.<br>MY,<br>| ry<br>**----- End of picture text -----**<br> **==> picture [30 x 20] intentionally omitted <==** **----- Start of picture text -----**<br> Wu<br>**----- End of picture text -----**<br> ## CBCE ## @ Features * Universal AC input / Full range - Protections: Short circuit / Overload / Over voltage - / Over temperature - Cooling by free air convection ## @ Applications * Industrial control system - Semiconductor fabrication equipment - Factory automation - Electro ~~-~~ mechanical apparatus - Can be installed on DIN rail TS- ~~3~~ 5/7 ~~.~~ 5 or 15 - UL 508 (industrial control equipment) approved - EN61000- ~~6~~ - ~~2~~ (EN50082- ~~2~~ ) industrial immunity level - 100% full load burn- ~~i~~ n test * 2 years warranty ## @ Description EDR- ~~7~~ 5 is one economical slim 75W Din rail power supply series, adapt to be installed on TS- ~~3~~ 5/7 ~~.~~ 5 or TS- ~~3~~ 5/15 mounting rails. The body is designed 32mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 9OVAC to 264VAC and conforms to EN61000- ~~3~~ - ~~2~~ , the norm the European Union regulates for harmonic current. EDR- ~~7~~ 5 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 88 ~~.~~ 5%, the entire series can operate at the ambient temperature between ~~-~~ 20°C and 60°C under air convection. It is equipped with constant current mode for over ~~-~~ load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950- ~~1~~ , and etc. ~~)~~ make EDR- ~~7~~ 5 avery competitive power supply solution for industrial applications. ## @ Model Encoding EDR ~~-~~ 75- ~~1~~ 2| L ~~e~~ Output voltage Output wattage Series name File Name:EDR-75-SPEC 2014 ~~-~~ 07 ~~-~~ 05 EDR- ~~7~~ 5 series ~~ee~~ **==> picture [251 x 40] intentionally omitted <==** **----- Start of picture text -----**<br> MV| [!] W VV [75W][ Single][ Output][ Industrial] [DIN RAIL]<br>**----- End of picture text -----**<br> ## SPECIFICATION |SPECIFICATION|SPECIFICATION||| |---|---|---|---| |OUTPUT<br>SAFETY&<br>EMC<br>2~~.~~ Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair~~-~~wire terminated with a 0~~.~~1uf & 47uf parallel capacitor.<br>3~~.~~ Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4~~.~~ The power supply is considered a component which will be installed into a final equipment. The final equipment must be re~~-~~confirmed that it<br>still meets EMC directives.<br>5~~.~~ Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6~~.~~ Derating may be needed under low input voltage~~.~~ Please check the derating curve for more details.|||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||2~~.~~ Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair~~-~~wire terminated with a 0~~.~~1uf & 47uf parallel capacitor.<br>3~~.~~ Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4~~.~~ The power supply is considered a component which will be installed into a final equipment. The final equipment must be re~~-~~confirmed that it<br>still meets EMC directives.<br>5~~.~~ Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6~~.~~ Derating may be needed under low input voltage~~.~~ Please check the derating curve for more details.||| File Name:EDR ~~-~~ 75 ~~-~~ SPEC 2014 ~~-~~ 07 ~~-~~ 05 **==> picture [511 x 730] intentionally omitted <==** **==> picture [511 x 730] intentionally omitted <==**
Updated at June 4, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →