Image not available
Illustrative purposes only
EDR-120-24
AC/DC DIN Rail Power Supply (PSU), ITE, 1 Output, 120 W, 24 VDC, 5 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type:
- SVHC: No SVHC (25-Jun-2025)
- Product Range: EDR-120 Series
- No. of Outputs: 1 Output
- Output Power Max: 120W
- Current, Output 4: -
- Input Voltage VAC: 90V AC to 264V AC
- Power Supply Output Type: Fixed
- Output Current - Output 1: 5A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Voltage - Output 1: 24VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 28.54 € |
| Current stock | 200+ |
| Lead time | 30 days |
Datasheet
120W Single Output Industrial DIN RAIL ## **- EDR 120 series** **==> picture [43 x 5] intentionally omitted <==** **----- Start of picture text -----**<br> User’s Manual<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [285 x 181] intentionally omitted <==** **----- Start of picture text -----**<br> IS13252<br>THOMAS SAMUEL THOMAS SAMUEL BauarSicherheitbeegelodwacmat geprufto ges g<br>[&] [FAL] (8) A www.ID 2000000000tuv.com CBC€ es<br>By [Wu] @» © til TPTC004 & (NOTE 8) BS EN/EN62368-1 IEC62368-1 ck<br>■ Applications<br>* Industrial control system<br>* Semiconductor fabrication equipment<br>* Factory automation<br>* Electro-mechanical apparatus<br>immunity level ■ GTIN CODE<br>MW Search: https://www.meanwell.com/serviceGTIN.aspx<br>**----- End of picture text -----**<br> **==> picture [13 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> ℃ ℃ ## ■ _File Name:EDR-120-SPEC 2024-09-30_ 120W Single Output Industrial DIN RAIL ## **- EDR 120 series** ## **SPECIFICATION** ||**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.6**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load<br>16ms/230VAC 10ms/115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>47 ~ 63Hz<br>85%<br>2.25A/115VAC 1.3A/230VAC<br>29 ~ 33V<br>87.5%<br>56 ~ 65V<br>88.5%<br>20A/115VAC 35A/230VAC<br><1mA / 240VAC<br>14 ~ 17V<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, re-power on to recover<br>UL508,TUV BS EN/EN62368-1,<br>,BSMI CNS15598-1,<br>approved;<br>BIS IS13252(Part1): 2010/IEC 60950-1:2005(NOTE 8)<br>EAC TP TC 004<br>(meet BS EN/EN60204-1)<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>40*125.2*113.5mm (W*H*D)<br>0.6Kg; 20pcs/13Kg/1.02CUFT<br>**EDR-120-24**<br>**EDR-120-48**<br>24V<br>48V<br>5A<br>2.5A<br>0 ~ 5A<br>0 ~ 2.5A<br>120W<br>120W<br>120mVp-p<br>150mVp-p<br>24 ~ 28V<br>48 ~ 55V<br>±1.0%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.0%<br>±1.0%<br>**EDR-120-12**<br>12V<br>10A<br>0 ~ 10A<br>120W<br>100mVp-p<br>12 ~ 14V<br>±2.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 4)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>℃<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>& 47<br>parallel capacitor.<br>μ<br>μ<br>F<br>F<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>8. Some model may not have the BIS logo, please contact your MEAN WELL sales for more information.<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>※Product Liability Disclaimer<br>For detailed information, please refer to<br>：<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>105 ~ 130% rated output power<br>Protection type :Constant current limiting, recovers automatically after fault condition is removed<br>Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2,-3,<br>CNS15936 Class A<br>EAC TP TC 020,<br>Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55035,<br>EN61000-6-2 (<br>EN50082-2),<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level, criteria A, EAC TP TC 020<br>-20 ~ +60<br>(Refer to "Derating Curve")<br>℃<br>[DC input operation possible by connecting AC/L(+), AC/N(-)]<br>2718.3K hrs min.<br>Telcordia SR-332 (Bellcore) ; 474.7K hrs min. MIL-HDBK-217F (25<br>)<br>℃|**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.6**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load<br>16ms/230VAC 10ms/115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>47 ~ 63Hz<br>85%<br>2.25A/115VAC 1.3A/230VAC<br>29 ~ 33V<br>87.5%<br>56 ~ 65V<br>88.5%<br>20A/115VAC 35A/230VAC<br><1mA / 240VAC<br>14 ~ 17V<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, re-power on to recover<br>UL508,TUV BS EN/EN62368-1,<br>,BSMI CNS15598-1,<br>approved;<br>BIS IS13252(Part1): 2010/IEC 60950-1:2005(NOTE 8)<br>EAC TP TC 004<br>(meet BS EN/EN60204-1)<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>40*125.2*113.5mm (W*H*D)<br>0.6Kg; 20pcs/13Kg/1.02CUFT<br>**EDR-120-24**<br>**EDR-120-48**<br>24V<br>48V<br>5A<br>2.5A<br>0 ~ 5A<br>0 ~ 2.5A<br>120W<br>120W<br>120mVp-p<br>150mVp-p<br>24 ~ 28V<br>48 ~ 55V<br>±1.0%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.0%<br>±1.0%<br>**EDR-120-12**<br>12V<br>10A<br>0 ~ 10A<br>120W<br>100mVp-p<br>12 ~ 14V<br>±2.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 4)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>℃<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>& 47<br>parallel capacitor.<br>μ<br>μ<br>F<br>F<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>8. Some model may not have the BIS logo, please contact your MEAN WELL sales for more information.<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>※Product Liability Disclaimer<br>For detailed information, please refer to<br>：<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>105 ~ 130% rated output power<br>Protection type :Constant current limiting, recovers automatically after fault condition is removed<br>Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2,-3,<br>CNS15936 Class A<br>EAC TP TC 020,<br>Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55035,<br>EN61000-6-2 (<br>EN50082-2),<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level, criteria A, EAC TP TC 020<br>-20 ~ +60<br>(Refer to "Derating Curve")<br>℃<br>[DC input operation possible by connecting AC/L(+), AC/N(-)]<br>2718.3K hrs min.<br>Telcordia SR-332 (Bellcore) ; 474.7K hrs min. MIL-HDBK-217F (25<br>)<br>℃|**EDR-120-12**|**EDR-120-24**|**EDR-120-48**| |---|---|---|---|---|---| |||**DC VOLTAGE**|12V|24V|48V| |||**RATED CURRENT**|10A|5A|2.5A| |||**CURRENT RANGE**|0 ~ 10A|0 ~ 5A|0 ~ 2.5A| |||**RATED POWER**|120W|120W|120W| |||**RIPPLE & NOISE (max.) Note.2**|100mVp-p|120mVp-p|150mVp-p| |||**VOLTAGE ADJ. RANGE**|12 ~ 14V|24 ~ 28V|48 ~ 55V| |||**VOLTAGE TOLERANCE Note.3**|±2.0%|±1.0%|±1.0%| |||**LINE REGULATION**|±0.5%|±0.5%|±0.5%| |||**LOAD REGULATION**|±1.0%|±1.0%|±1.0%| |||**SETUP, RISE TIME**|1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load||| |||**HOLD UP TIME (Typ.)**|16ms/230VAC 10ms/115VAC at full load||| |||**VOLTAGE RANGE**<br>**Note.6**|90 ~ 264VAC 127 ~ 370VDC|[DC input operation possible by connecting AC/L(+), AC/N(-)]|| |||**FREQUENCY RANGE**|47 ~ 63Hz||| |||**EFFICIENCY (Typ.)**|85%|87.5%|88.5%| |||**AC CURRENT (Typ.)**|2.25A/115VAC 1.3A/230VAC||| |||**INRUSH CURRENT (Typ.)**|20A/115VAC 35A/230VAC||| |||**LEAKAGE CURRENT**|<1mA / 240VAC||| |||**OVERLOAD**|105 ~ 130% rated output power<br>Protection type :Constant current limiting, recovers automatically after fault condition is removed||| |||**OVER VOLTAGE**|29 ~ 33V<br>56 ~ 65V<br>14 ~ 17V<br>Protection type : Shut down o/p voltage, re-power on to recover||| |||**OVER TEMPERATURE**|Shut down o/p voltage, re-power on to recover||| |||**WORKING TEMP.**|-20 ~ +60<br>(Refer to "Derating Curve")<br>℃||| |||**WORKING HUMIDITY**|20 ~ 95% RH non-condensing||| |||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH<br>℃||| |||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)||| |||**VIBRATION**|Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6||| |||**SAFETY STANDARDS**|UL508,TUV BS EN/EN62368-1,<br>,BSMI CNS15598-1,<br>approved;<br>BIS IS13252(Part1): 2010/IEC 60950-1:2005(NOTE 8)<br>EAC TP TC 004<br>(meet BS EN/EN60204-1)||| |||**WITHSTAND VOLTAGE**|I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC||| |||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||| |||**EMC EMISSION**|Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2,-3,<br>CNS15936 Class A<br>EAC TP TC 020,||| |||**EMC IMMUNITY**|Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55035,<br>EN61000-6-2 (<br>EN50082-2),<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level, criteria A, EAC TP TC 020||| |||**MTBF**|2718.3K hrs min.<br>Telcordia SR-332 (Bellcore) ; 474.7K hrs min. MIL-HDBK-217F (25<br>)<br>℃||| |||**DIMENSION**|40*125.2*113.5mm (W*H*D)||| |||**PACKING**|0.6Kg; 20pcs/13Kg/1.02CUFT||| |||1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>℃<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>& 47<br>parallel capacitor.<br>μ<br>μ<br>F<br>F<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>8. Some model may not have the BIS logo, please contact your MEAN WELL sales for more information.<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>※Product Liability Disclaimer<br>For detailed information, please refer to<br>：|||| _File Name:EDR-120-SPEC 2024-09-30_ **- EDR 120 series** ## 120W Single Output Industrial DIN RAIL ## **Block Diagram** **==> picture [481 x 323] intentionally omitted <==** **----- Start of picture text -----**<br> fosc : 70KHz<br>EMI FILTER POWER RECTIFIERS +V<br>I/P & SWITCHING & -V<br>RECTIFIERS FILTER<br>O.C.P.<br>O.L.P.<br>DETECTION<br>FG<br>PWM CIRCUIT<br>O.T.P. CONTROL<br>O.V.P.<br>Derating Curve Static Characteristics<br>230VAC 12V(230VAC) 100<br>100<br>90<br>24V,48V(230VAC)<br>80<br>115VAC 80<br>60 12V,24V,48V(115VAC) 70<br>50<br>60<br>40<br>50<br>20<br>40<br>-20 -10 0 10 20 30 40 45 50 60 70 (VERTICAL) 90 100 125 135 145 155 165 175 180 200 230 264<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (V) 60Hz<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br> _File Name:EDR-120-SPEC 2024-09-30_ **- EDR 120 series** ## 120W Single Output Industrial DIN RAIL **==> picture [494 x 661] intentionally omitted <==** **----- Start of picture text -----**<br> Mechanical Specification<br>(Unit: mm , tolerance ± 1mm) Case No.992D<br>Top View<br>113.5<br>40<br>1 2 3 4<br>TB2<br>+V ADJ. +<br>DC OK<br>TB1<br>1 2 3<br>Side View Front View Side View<br>Terminal Pin No. Assignment (TB1)<br>Pin No. Assignment<br>1 FG<br>2 AC/N or DC -<br>3 AC/L or DC +<br>Terminal Pin No. Assignment (TB2)<br>Pin No. Assignment<br>1,2 DC OUTPUT -V<br>3,4 DC OUTPUT+V<br>Bottom View<br>Installation Instruction<br>This series fits DIN rail TS35/7.5 or TS35/15.<br>For installation details, please refer to the Instruction manual.<br>ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15<br>(For reference only. Not included with unit.)<br>Back View<br>Installation Manual<br>35<br>35<br>125.2<br>**----- End of picture text -----**<br> Please refer to : http://www.meanwell.com/manual.html _File Name:EDR-120-SPEC 2024-09-30_
Updated at June 4, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →