ECS130US18

AC/DC Open Frame Power Supply (PSU), ITE & Medical, 1 Output, 130W @ 10CFM, 100 W

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: XP POWER
Product type: AC / DC Open Frame Power Supplies
No. of Outputs:1 Output; Power Rating (Covection Cooling):100W; Power Rating (Forced Cooling):130W @ 10CFM; Input Voltage VAC:80V AC to 264V AC; Power Supply Output Type:Adjustabl
SVHC: No SVHC (17-Jan-2023)
Product Range: ECS130 Series
No. of Outputs: 1 Output
Output Power Max: 130W
Input Voltage VAC: 80V AC to 264V AC
Input Voltage AC Max: 264V
Input Voltage AC Min: 80V
Power Supply Output Type: Adjustable, Fixed
Output Current - Output 1: 7.3A
Output Current - Output 2: -
Output Current - Output 3: -
Output Current - Output 4: -
Output Voltage - Output 1: 18VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: ITE & Medical
Power Rating (Forced Cooling): 130W @ 10CFM
Power Rating (Convection Cooling): 100W

Delivery and price
Units per pack	50
Price	62.4 €
Current stock	10+
Lead time	30 days

Datasheet

**65/100/130 Watts** 

xppower.com 

## **ECS Series** 

- IT & Medical Safety Approvals 

- 65/80/100 W - Convection-cooled Ratings 

- Class I & Class II Construction 

- Industry Standard 2”x 4”Package 

- <0.5 W No Load Input Power 

- Low Leakage Current 

- 3 Year Warranty 

## ~~**Specification**~~ 

## **Input** 

- Input Voltage • 80-264 VAC derate output power <90 VAC, see derating curves 

- Input Frequency • 47-63 Hz[(1) ] Input Current • 65 W: 1.0/0.6 A typical at 115/230 VAC 100 W: 1.5/0.9 A typical at 115/230 VAC, 130 W: 1.9/1.1 A typical at 115/230 VAC full load 

- Inrush Current • 40 A max at 230 VAC, cold start at 25 ˚ C Power Factor • EN61000-3-2, class A No Load Input Power • <0.5 W Earth Leakage Current • 65/130 W: 260 μ A at 264 VAC/60 Hz max 100 W: 230 μ A at 264 VAC/60 Hz max 

- Input Protection • Internal T3.15 A/250 V fuse in line and neutral 

## **Output** 

- Output Voltage • 12-48 VDC (see tables) Output Voltage Trim • ±10% Initial Set Accuracy • ±1% Minimum Load • No minimum load required Start Up Delay • 1 s typical Start Up Rise Time • 50 ms Hold Up Time • 16 ms min at 115 VAC Drift • ±0.2% after 20 min warm up Line Regulation • ±0.5% max Load Regulation • ±1% Over/Undershoot • 5% typical Transient Response • 4% max. deviation, recovery to within 1% in 500 μ s for a 50-75-50% load change 

Ripple & Noise • 1% pk-pk, 20 MHz bandwidth Overvoltage Protection • 115-140% Vnom, recycle input to reset Overload Protection • 110-160% Short Circuit Protection • Continuous trip and restart (hiccup mode) Temperature • 0.05%/ ˚ C Coefficient 

## ~~**Notes**~~ 

1. ECS65US12 has 400Hz IT approval. 

## **General** 

- Efficiency • Up to 90% model dependent Isolation • 4000 VAC Input to Output, 2 x MOPP, 1500 VAC Input to Ground, 1 x MOPP, 500 VDC Output to Ground, 1 x MOPP 

- Switching Frequency • 65 KHz typical Power Density • 65 W: 7.7 W/in[3] , 100 W: 10 W/in[3] , 130 W: 13 W/in[3] 

- MTBF • 65 W: 850 kHrs, 100 W: 834 kHrs, 130 W: 715 kHrs to MIL-HDBK-217F at 25 ˚ C, GB 

## **Environmental** 

- Operating Temperature • linearly from +50 load at +70 -20 ˚ C (-40 ˚ C, ECS130) to +70 ˚ C. ˚ C at 2.5%/ ˚ C to 50% ˚ C derate 

- Cooling • Convection & fan cooled ratings (see tables) Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 ˚ C to +85 ˚ C Operating Altitude • 65-100 W: 3000 m, 130 W: 5000m Shock • 30 g pk, half sine, 6 axes Vibration • 2 g rms, 5 Hz to 500 Hz, 3 axes 

## **EMC & Safety** 

- Low Voltage PSU EMC • EN61204-3, high severity level Emissions • EN55011/32 level B conducted EN55011/32 level A radiated, level B Suffix ‘-B’ models 

- Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±6 kV Contact, ±15 kV Air Discharge, Perf Criteria A 

- Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, installation class 3 Perf Criteria A 

- Conducted Immunity • EN61000-4-6, level 3 Perf Criteria A Dips & Interruptions • EN61000-4-11 , 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B , EN60601-1-2, 30% 500 ms, 60% 100 ms, 100% 10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation. 

- Safety Approvals • IEC60950-1:2005 Ed 2 / IEC62368-1:2014 UL 62368-1 & CAN/CSA C22.2 No. 623681-14, EN62368-1:2014/A11:2017 IEC60601-1 CB report, CSA 22.2 No. 60601-1, ANSI/AMMI ES60601-1, TUV 60601-1, including risk management, CE & UKCA meets all applicable directives & legislation. 

- Equipment Protection • Class I & II (ECS65 Non ‘-B’ models, Class Class I only) 

**ECS65** 

## ~~**Models and Ratings**~~ 

|Output Power|Output Voltage|Output Current|Model Number(1)|
|---|---|---|---|
|65 W|12.0 VDC|5.4 A|ECS65US12|
|65 W|15.0 VDC|4.3 A|ECS65US15|
|65 W|18.5 VDC|3.4 A|ECS65US18|
|65 W|24.0 VDC|2.7 A|ECS65US24|
|65 W|28.0 VDC|2.3 A|ECS65US28|
|65 W|48.0 VDC|1.4 A|ECS65US48|



## ~~**Notes**~~ 

_1. For Class B radiated emissions models, add suffix -B to model number. For covered versions, add suffix ‘-C’ to model number or order part no. ECM40/60 COVER for standalone cover. Derate output power by 20% with cover. The cover is not suitable for Class II installations._ 

## ~~**Mechanical Details**~~ 

**==> picture [466 x 198] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00 (101.6)<br>1.05<br>0.125 (3.17) 3.750 (95.25) (26.7)<br>_|——_<br>C4<br>fp5 29 1 100e 76<br>2.00 (50.8) 1.75 (44.45) J1 2 C5<br>1<br>T1 1<br>J2<br>7 ARS alo<br>0.95 (24.1) a o ut | tir 4 0.96 (24.5)<br>0.25 Faston Ground Tab<br>0.125 (3.18) Q1 0.20 (5.1)<br>0.14 (3.5)<br>SMD Component Height<br>a 0.20 (5.1) @ ES 4 X ø.156 (3.96) Mounting Holes<br>ø.312 (7.92) Clearance top and bottom<br>**----- End of picture text -----**<br>


|In put Connector J1|In put Connector J1||Output Connector J2|Output Connector J2|
|---|---|---|---|---|
|Molex PN 09-65-2038|Molex PN 09-65-2038||Molex PN 09-65-2048|Molex PN 09-65-2048|
|Pin 1|Line||Pin 1|+V1|
|Pin 2|Neutral||Pin 2|+V1|
|0.25” Faston|Earth||Pin 3|RTN|
||||Pin 4|RTN|



J1 mates with Molex Housing PN 09-50-1031, J2 mates with Molex Housing PN 09-50-1041 and both with Molex Series 5194 Crimp Terminals 

## ~~**Notes**~~ 

1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 

2. Weight: 0.386 lbs (175 g) 

## ~~**Derating Curve - ECS65 Models**~~ 

**==> picture [178 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>50<br>0<br>-20 0 +50 +70<br>Ambient Temperature (ºC)<br>Output Load (%)<br>**----- End of picture text -----**<br>


**ECS100** 

## ~~**Models and Ratings**~~ 

|Output Power<br>Forced Cooled(10 CFM)<br>Convection-cooled|Output Voltage|Output Current|Model Number(1)|
|---|---|---|---|
|100 W<br>80 W|12.0 VDC|8.3 A|ECS100US12|
|100 W<br>80 W|15.0 VDC|6.7 A|ECS100US15|
|100 W<br>80 W|18.0 VDC|5.5 A|ECS100US18|
|100 W<br>80 W|24.0 VDC|4.2 A|ECS100US24|
|100 W<br>80 W|28.0 VDC|3.6 A|ECS100US28|
|100 W<br>80 W|48.0 VDC|2.1 A|ECS100US48|



## ~~**Notes**~~ 

_1. For Class B radiated emissions models, add suffix -B to model number. For covered versions, add suffix ‘-C’ to model number or order part no. ECM40/60 COVER for standalone cover. Derate output power by 20% with cover. The cover is not suitable for Class II installations. ‘-C’ not available for ‘-B’ models._ 

## ~~**Mechanical Details**~~ 

**==> picture [527 x 375] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00 (101.6)<br>1.25 (31.8)<br>0.125 (3.18) 3.750 (95.25)<br>a _<br>C4<br>2.00 +0.06/-0.00 1.750  Voltage<br>(50.8 +1.5/-0.00) (44.45) Adj.<br>J1 C5<br>T1<br>J2 Output Connector J2<br>1.00  L U _ i e 1.01  EI Molex PN 09-65-2048<br>(25.4) (25.7)<br>MoO e l t T  LS) Pin 1 +V1<br>Q1 Pin 2 +V1<br>Pin 3 RTN<br>0.25 Faston  0.20 (5.1) Pin 4 RTN<br>0.125 (3.18) Ground Tab 0.14 (3.5)<br>SMD Component<br>4 X ø.156 (3.96) Mounting Holes Height<br>0.20 (5.1) | ø.312 (7.92) Clearance top and bottom | b In put Connector J1<br>Molex PN 09-65-2038<br>Pin 1 Line<br>‘-B’ Model<br>4.50 (114.3) 1.25 (31.8) Pin 2 Neutral<br>0.25” Faston Earth<br>0.37 (9.52) 3.75 (95.25)<br>J1 mates with Molex Housing<br>PN 09-50-1031, J2 mates with<br>Molex Housing PN 09-50-1041<br>and both with Molex Series<br>a (E SO (__ FF<br>2.00 +0.06/-0.00 T 1.75  J1 Tey Co m = 5194 Crimp Terminals<br>(50.8 +1.5/-0.00) (44.45)<br>l l | (_ ) i Notes<br>0.20  J2 1. All dimensions in inches<br>1.00  (5.1) ha 1.01  7d |b (mm).<br>(25.4) (25.7) Tolerance .xx = ±0.02<br>(0.50); .xxx = ±0.01 (0.25)<br>u l = SSS4 , y Ev e :<br>2. Weight: 0.386 lbs (175 g)<br>0.20 (5.1)<br>0.125 (3.18) 0.14 (3.5)<br>SMD Component  J L<br>4 X ø.156 (3.96) Mounting Holes Height<br>ø.312 (7.92) Clearance top and bottom<br>0.10 (2.5)<br>0.25 Faston Ground Tab<br>**----- End of picture text -----**<br>


## ~~**Derating Curve - ECS100 Models**~~ 

**==> picture [429 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 100<br>90 90 Force-cooled >10 CFM<br>80 a ITT 80 /<br>Convection-cooled<br>70605040 iia 70605040 eeNSSOS Convection-cooled with cover SS<br>Ss S 30 i<br>7 tT S yo<br>80 85 90 264 -20 +40 +50 +60 +70<br>Input Voltage (VAC) Ambient Temperature (ºC)<br>Output Power (%) Output Power (W)<br>**----- End of picture text -----**<br>


**ECS130** 

## ~~**Models and Ratings**~~ 

|Output Power|Output Power|Output Voltage|Output Current|Model Number(1)|
|---|---|---|---|---|
|Forced Cooled(10 CFM)|Convection-cooled||||
|130 W|100 W|12.0 VDC|10.9 A|ECS130US12|
|130 W|100 W|15.0 VDC|8.7 A|ECS130US15|
|130 W|100 W|18.0 VDC|7.3 A|ECS130US18|
|130 W|100 W|24.0 VDC|5.4 A|ECS130US24|
|130 W|100 W|28.0 VDC|4.7 A|ECS130US28|
|130 W|100 W|48.0 VDC|2.7 A|ECS130US48|



## ~~**Notes**~~ 

_1. For covered versions, add suffix ‘-C’ to model number or order part no. ECM40/60 COVER for standalone cover, see derating curve. The cover is not suitable for Class II installations. ‘-C’._ 

## ~~**Mechanical Details**~~ 

**==> picture [473 x 223] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00 (101.6)<br>1.28<br>0.125 (3.17) 3.750 (95.25)  (32.5)<br>— _<br>C19 Voltage Adjust<br>2.00 +0.06/-0.00<br>N<br>(50.8 +1.5/-0.00) 1.75 (44.45) 2<br>J1<br>1 T1 1<br>L<br>J2<br>1.00 (25.4) C5 4 1.05 (26.7)<br>Wee eel<br>Quai se |<br>0.12 (3.18) Q1 0.20 (5.1)<br>0.15 (3.8)<br>0.20 (5.1) J a SMD COMPONENT HEIGHT<br>.25 FASTON<br>GROUND TAB<br>4X 0.156 (3.96) MOUNTING HOLES<br>0.312 (7.92) CLEARANCE TOP AND BOTTOM<br>**----- End of picture text -----**<br>


|In put Connector J1|In put Connector J1|**Notes**||
|---|---|---|---|
|Molex PN 09-65-2038<br>Pin 1|Molex PN 09-65-2038<br>Line|1. All dimensions in inches (mm).<br>Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25)||
|Pin 2|Neutral|2. Weight: 0.386 lbs (175 g)||
|0.25” Faston|Earth|||



|Output Connector J2<br>Molex PN 09-65-2048|Output Connector J2<br>Molex PN 09-65-2048|
|---|---|
|Pin 1|+V1|
|Pin 2|+V1|
|Pin 3|RTN|
|Pin 4|RTN|



J1 mates with Molex Housing PN 09-50-1031, J2 mates with Molex Housing PN 09-50-1041 

and both with Molex Series 5194 Crimp Terminals 

## ~~**Derating Curve - ECS130 Models**~~ 

**==> picture [463 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
130 130<br>120 120<br>Forced-cooled >10 CFM Forced-cooled >10 CFM<br>110 110<br>100 Tn LL + 100 a.<br>90 / 7 ——— 90 NN<br>Convection-cooled Convection-cooled<br>80 80<br>70 7 cf 70 oN<br>60 LAa Convection-cooled with cover | 60 NALL Convection-cooled with cover<br>50 nr 50 ON NY<br>40 40<br>30 i 30 eeSN<br>20 a 20 ee<br>10 a 10 ee<br>a i [a] =y—_|<br>80 90 100 264 -40 -20 0 50 60 70<br>Input Voltage (VAC) Ambient Temperature (ºC)<br>Output Power (W) Output Power (W)<br>Some specification parame ters may not  be met<br>**----- End of picture text -----**<br>


**ECS65/100/130** 

**Covered Version (not available for ECS100-B Models)** 

## ~~**Mechanical Details**~~ 

**==> picture [426 x 361] intentionally omitted <==**

**----- Start of picture text -----**<br>
i 4.49 (114.0)<br>| R ey AAN A N BGR me n<br>2.52 Input Connector HE Output Connector<br>(64.0)<br>Ug NS HULL la<br>0.25 (0.6) Ground<br>Faston Terminal o A Maes<br>—— — B<br>0.807<br>(20.50)<br>1.54<br>(39.0) 2 x M3 x 0.5 THD<br>0.16 (4.0)<br>Max Screw Penetration<br>fp<br>4.055 (103.00) 0.22<br>ee LL<br>(5.5)<br>4.055 (103.00) 0.22<br>a a e<br>| ey l H] (5.5)<br>0.79<br>(20.0)<br>1<br>0.984<br>nie oe oT<br>(25.00)<br>re 4 x M3 x 0.5 THD<br>0.16 (4.0) Max Screw Penetration<br>**----- End of picture text -----**<br>


## ~~**Notes**~~ 

1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 

2. Weight: 0.8 lbs (360 g) 

## ~~**Thermal Considerations - All Models**~~ 

In order to ensure safe operation of the PSU in the most adverse conditions permitted in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. See mechanical drawing for component locations. Temperature should be monitored using K type thermocouples placed on the hottest part of the component (out of any direct air flow). 

||Temperature Measurements (Ambient≤ 50 °C)|
|---|---|
|Component|Max Temperature °C|
|T1|110 °C|
|C5|100 °C|
|C4/C19|100 °C|
|Q1|110 °C|



28 July 2022

Updated at June 8, 2026

XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →