ECASD40D107M016K00

!Note[• Please read rating and ] rn 7[!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] La Me ia. Ha oe 1. ts 

ae ‘ C90E.pdf May.17,2012 

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

# **POLYMER** = td i’ **Aluminum Electrolytic** i ie 2 in 2 & 1, te % : ha - 2 op **Capacitors** 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] • This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

## **Description** GallD 

Murata Manufacturing Co., Ltd.'s ECAS series of polymer aluminum electrolytic capacitors realize low ESR, low impedence and high capacitance by means of multilayered aluminum foil for anode, solid conductive polymer for cathode. With no bias characteristics and stable temperature characteristics, ECAS series have excellent performance in ripple absorption, smoothing and transient response suitable for numerous applications. Therefore, it is suitable for smoothing of input-output current of various power supply circuits, and the backup use over the load change of the CPU circumference. 

This contributes to reduction of the number of parts, or reduction of substrate area. 

**==> picture [480 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
Appearance External Dimensions<br>Gaz»> Ga»<br>L W<br>Polarity Indicator Bar (+)<br>Capacitance Code<br>Rated Voltage Code<br>S S W1<br>|__| | Lt (in mm)<br>Case Size EIA Metric L W T W1 S<br>D4 7343 7.3±0.3 4.3±0.2 1.9±0.1 2.4±0.2 1.3±0.2<br>Ex.) 220μF/2V<br>D6 7343 7.3±0.3 4.3±0.2 2.8±0.3 2.4±0.2 1.3±0.2<br>D9 7343 7.3±0.3 4.3±0.3 4.2±0.3 2.4±0.2 1.3±0.2<br>—ae<br>GilllD> Specifications<br>c Capacitance Range Capacitance Range : 6.8 to 470μF c Rated Voltage: 2 to 16Vdc<br>c Operating Temperature: -40°C to +105°C c ESR : 6 to 70mΩ<br>T<br>**----- End of picture text -----**<br>


c Capacitance Range Capacitance Range : 6.8 to 470μF c Operating Temperature: -40°C to +105°C 

## **Features** GD 

c High capacitance and Low ESR 

c Stable capacitance with applied DC voltage/temperature/high frequencies 

- c Excellent Ripple absorption, Smoothing, Transient response 

c Polarity bar (positive) noted on product c Surface mount construction 

c RoHS compliant c Halogen free c MSL 3 packaging 

c No voltage derating required 

**==> picture [410 x 272] intentionally omitted <==**

**----- Start of picture text -----**<br>
Capacitor Map (Cap & ESR)<br>Gi»<br>100<br>Ta Capacitor Al Capacitor<br>(MnO2) (Can Type/Electrolyte)<br>| :><br>10<br>Ta Capacitor<br>(Polymer)<br>1 eS<br>Al Capacitor<br>(Can Type/Polymer)<br>“1,<br>0.1<br>ECAS Series<br>0.01<br>MLCC<br>0.001<br>1 10 100 1000 10000<br>Capacitance (μF) at 120Hz<br>ESR (ohm) at 100kHz<br>**----- End of picture text -----**<br>


2 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] 

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

## Capacitance Value (μF) 

**==> picture [508 x 713] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.8 10 15 22 33 47 56 68 82 100 150 180 220 330 470<br>D4 D4 D4 D6 D6<br>2<br>POLYMER & MLCC 16 9 9 7 6<br>4 SOLUTIONS D4 D4 D4 D6 D6 D9<br>20 16 16 12 10 8<br>D4 D4 D4 D4 D4 D4 D6 D6 D9<br>6.3<br>55 45 25 25 15 15 10 10 10<br>D4 D4 D4 D4 D6 D9 D9<br>10<br>55 28 25 25 15 10 10<br>D4 D4 D4 D4 D6 D6 D9<br>12.5 55 45 30 25 20 20 12 POLYMER<br>D4 D4 D4 D6 SOLUTIONS<br>16<br>70 60 40 30<br>D4 Case Size Code<br>POLYMER & MLCC SOLUTIONS POLYMER SOLUTIONS<br>6 ESR (mΩ)<br>Characteristics<br>10 KR Tite Z | fief Low ESR & Z ECASD60D477M006K00 © © PW 40 DC Bias CharacteristicsRepresentative Data 40 Temperature Characteristics of CapacitanceRepresentative Data oo<br>PSE ECASD60J157M010K00 fH f<br>1 ECASD61C226M030K00 20 20<br>=Si a nil efi SJ<br>PSSST SS 0 —$—$—<——— 0 — =<br>0.1<br>-20 -20<br>0.01<br>-40 -40<br>No Bias<br>0.001 a ESR a ee -60 -60 50% of Rated Voltage ——<br>1 10 100 1,000 10,000 100,000 0 25 50 75 100 -50 -25 0 25 50 75 100 125<br>Frequency (kHz) Bias Voltage/Rated Voltage (%) Temperature (°C)<br>Design Support Tool - SimSurfing<br>http://www.murata.com/simsurfing/<br>- Frequency responses (Z, ESR, ESL) of ECAS Series are available.<br>- Netlist and S-parameter can be downloaded.<br>- The software "SimSurfing" is also available for your simulation on the go where no internet connection<br>is available.<br>Applications<br>Market Set/Application Overall Power Management<br>Ex.1) Power Supply line around IC etc...<br>Notebook/Netbook<br>Power CPU<br>Supply ASIC<br>Server FPGA<br>Computer Target etc<br>Motherboard/Graphics Card<br>IC on ESL ESR<br>I<br>Multi Function Peripheral (Copier/Printer) V V<br>V Cap<br>| Gt<br>Digital TV (LCD/Plasma) —> t = t<br>t<br>c Eliminates Ripple c Stabilizes  c Eliminates High Frequency<br>Digital AV Game Console c Smoothes Voltage Source     Voltage Source      Noise from IC<br>Ex.2) USB bus power line<br>Set Top Box c Peak Power Assistance<br>USB2.0 5V USB Power supply<br>USB3.0 from ECAS<br>Network/Switch/Router IC Port I<br>Telecom Target<br>Power supply<br>Base Station — from Battery<br>t<br>Rated Voltage (Vdc)<br>)Ω<br>ESR or Z (<br>Capacitance Change (%) Capacitance Change (%)<br>**----- End of picture text -----**<br>


3 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] 

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

## GED **Part Numbering** 

(Part Number) 

**==> picture [218 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
ECAS D4 0D 227 M 009 K 00<br>q w e r t y u i<br>qSeries<br>Product ID<br>ee ee<br>ECAS Polymer AI Electrolytic Capacitor<br>**----- End of picture text -----**<br>


## wDimension (LxWxT) (mm) 

|Code|L|W|T|
|---|---|---|---|
|**D4**<br>**D6**|7.3±<br>0.3<br>7.3±<br>0.3|4.3±<br>0.2<br>4.3±<br>0.2|1.9±<br>0.1<br>2.8±<br>0.3|
|**D9**|7.3±<br>0.3|4.3±<br>0.3|4.2±<br>0.3|



|eRated Voltage||
|---|---|
|**0D**<br>Code<br>~~ee~~|Rated Voltage<br>DC 2V<br>~~ee~~|
|**0E**|DC 2.5V|
|**0G**|DC 4V|
|**0J**|DC 6.3V|
|**0K**|DC 8V|
|**1A**|DC 10V|
|**1B**|DC 12.5V|
|**1C**|DC 16V|



## rCapacitance 

Expressed by three-digit numeric code. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. Ex.) 

|Code|Capacitance|
|---|---|
|**476**|47μF|
|**107**|100μF|
|**227**|220μF|
|**477**|470μF|



tCapacitance Tolerance 

## Code Capacitance Tolerance ~~ee ee~~ **M** ±20% 

## yESR 

Expressed by three-digit alphanumerics. The unit is milli-ohm (mΩ). If there is a decimal point, it is expressed by the capital letter "R". Ex.) 

||Ex.)||
|---|---|---|
||Code|ESR|
||**4R5**|4.5mΩ|
||**009**|9mΩ|
||**010**|10mΩ|
|uPackaging<br>Code<br>~~ee ee~~||Packaging<br>~~ee~~|
||**K**|ø330mm Embossed Taping|



**==> picture [110 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
iIndividual Specification Code<br>**----- End of picture text -----**<br>


Expressed by two figures. 

## GEE» **Specifications and Test Methods** 

|No.<br>1<br>| ||Item<br>Operating Temperature Range|Item<br>Operating Temperature Range|Characteristics<br>-40°C to +105°C|—<br>Test Conditions<br>~~Se~~|
|---|---|---|---|---|
|2|Leakage Current||BThe value of "Part Number Listing"|Series resistor : 1000 ohm<br>Applied voltage: Rated Voltage<br>Measuring after 2 minutes of application<br>Please conduct pre-conditioning below, if you have a<br>doubt.<br>Pre-conditioning: · Temperature: room temp. · Applied<br>voltage: Rated Voltage · Series resistor: 1000 ohm<br>Charge time: 30 min.|
|3|Capacitance Tolerance||Please refer to "Part Number Listing"|Measuring frequency<br>: 120Hz±<br>10%<br>Measuring circuit<br>: Equivalent series circuit<br>Measuring voltage<br>: +1Vr.m.s.<br>Measuring temperature: 25°C|
|4|Dissipation Factor||B0.06||
|5|ESR<br>~~a~~||BThe value of "Part Number Listing"|Measuring frequency<br>: 100kHz±<br>10%<br>Measuring voltage<br>: no more than +1Vr.m.s.<br>Measuring temperature: 25°C<br>~~|~~|
|6|Allowable Ripple Current<br>~~a~~<br>~~ee~~||Please refer to "Part Number Listing"<br>~~ee~~|Measuring frequency: 100kHz±<br>10%<br>~~|~~<br>||
|7|Solderability<br>~~ee~~||More than 95% of each terminal face is<br>covered by new solder<br>~~ee~~|Eutectic solder<br>: H60A<br>Flux<br>: Ethanol solution of 25% rosin<br>Solder temperature: 235±<br>5°C<br>Immersing time<br>: 5±<br>0.5s|
|8|Moisture<br>Resistance<br>Under No Bias<br>~~ee~~<br>|~~Ep~~<br>~~Se~~|Leakage Current<br>~~ee~~<br>~~Ep~~|B750% of initial specified value<br>for 2V to 10V products<br>B300% of initial specified value<br>for 12.5V to 16V products<br>~~ee~~<br>~~Ep~~|Test temperature: 60±<br>2°C<br>Relative humidity: 90 to 95%RH<br>Test time<br>: 500+24, -0h|
|||Capacitance Change <br>~~Ep~~<br>~~Se~~|-20% and +50% of initial measured value<br>~~Ep~~||
|||Dissipation Factor<br>~~Ep~~<br>~~Se~~|B0.12<br>~~Ep~~||
|||Appearance<br>~~Ep~~<br>~~Se~~|No defects or abnormalities<br>~~Ep~~||



Test Conditions ~~Se~~ 

4 

C90E.pdf May.17,2012 

**==> picture [512 x 779] intentionally omitted <==**

**----- Start of picture text -----**<br>
!Note [• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.]<br>• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.<br>No. Item Characteristics Test Conditions<br>P o<br>Leakage Current BThe value of "Part Number Listing" Test temperature: 60±2°C<br>Moisture<br>Capacitance Change -20% and +50% of initial measured value Relative humidity: 90 to 95%RH<br>9 Resistance<br>Under Load Dissipation Factor B0.12 Test time : 1000+48, -0h<br>Applied voltage : Rated Voltage<br>[+ Appearance No defects or abnormalities<br>Leakage Current BThe value of "Part Number Listing"<br>Capacitance Change ±10% of initial measured value Test temperature: 105±2°C<br>10 Shelf Life<br>ee Dissipation Factor B0.06 Test time : 1000+48, -0h<br>ee Appearance No defects or abnormalities<br>Leakage Current BThe value of "Part Number Listing"<br>Capacitance Change ±10% of initial measured value Test temperature: 105±2°C<br>11 Endurance Test time : 1000+48, -0h<br>ee Dissipation Factor B0.06 Applied voltage : Rated Voltage<br>————ee Appearance No defects or abnormalities :<br>Leakage Current BThe value of "Part Number Listing" Temperature:<br>Capacitance Change ±10% of initial measured value +85°C for 2V to 10V products<br>Room temp. for 12.5V to 16V products<br>Dissipation Factor B0.06<br>Applied voltage:<br>Rated voltage x1.25 for 2V to 10V products<br>Rated voltage x1.15 for 12.5V to 16V products<br>Current limiting resistance:<br>12 Surge<br>33 ohm (in series) for 2V to 10V products<br>Appearance No defects or abnormalities 1k ohm (in series) for 12.5V to 16V products<br>Discharge resistance:<br>33 ohm (in series) for 2V to 10V products<br>1k ohm (in series) for 12.5V to 16V products<br>Charge on/off:<br>=laa 30 sec. each, 1000 times<br>(The measurement condition in No.2 to 4 applies to No.8 to 12.)<br>Recommended Reflow Profile Land Pattern Design<br>Sa oS<br>10sec. max.<br>(Peak Temp.: 245°C max.)<br>250<br>Capacitor<br>200 2.8<br>60sec. max.<br>150 (225°C and over)<br>co<br>160sec. max. 115sec. max.<br>100<br>(150°C to 195°C) (195°C and over)<br>4.0<br>50 Max temperature 245°C, two times.<br>If peak temp > 245°C, please contact Murata for more details.  8.8<br>0  (in mm)<br>Time (sec.)<br>GD Packaging<br>4.0±0.1 W<br>2.0±0.1<br>1.5+0.1–0 Polarity<br>D (-) 2.0±0.5<br>ø13±0.2<br>1.5 [+0.25] –0 (+) ø21±0.8<br>A C<br>8.0±0.1<br>sta i n: 1]<br>(in mm) W1 (in mm)<br>Case Cavity Size (mm) Minimum Qty.<br>Size A± 0.2 B± 0.2 C±0.2 D (pcs.) Reel Size Tape Width A B W W1<br>D4 4.5 7.6 2.2 0.4max. 3,000 ø330 12 330.0±2.0 100.0±1.0 17.5±1.5 13.5±1.5<br>D6 4.5 7.6 3.2 0.4max. 2,500<br>D9 4.5 7.6 4.6 0.4max. 2,000<br>OO<br>Temperature (°C)<br>1.75±0.1<br>5.5±0.1 B<br>B A<br>12.0±0.3<br>**----- End of picture text -----**<br>


5 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] 

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

|Part Number (Murata)|Rated<br>Voltage<br>(V.DC)|(μF)<br>Cap.|(%)<br>Cap.<br>Tolerance|Case Size|Case Size|Case Size|(mΩ)<br>100kHz<br>/+25°C<br>ESR Max.|(μA)<br>Leakage<br>Current|(Arms)<br>100kHz<br>Ripple<br>Current|Min.<br>Packaging<br>Quantity<br>(pcs.)|
|---|---|---|---|---|---|---|---|---|---|---|
|||||Code|L x W<br>(mm)|T<br>(mm)|||||
|**ECASD40D107M016K00**|2|100|±<br>20|D4|7343|1.9|16|8.0|2.0|3,000|
|**ECASD40D157M009K00**|2|150|±<br>20|D4|7343|1.9|9|12.0|3.0|3,000|
|**ECASD40D227M009K00**|2|220|±<br>20|D4|7343|1.9|9|17.6|3.0|3,000|
|**ECASD60D337M007K00**|2|330|±<br>20|D6|7343|2.8|7|26.4|3.5|2,500|
|**ECASD60D477M006K00**|2|470|±<br>20|D6|7343|2.8|6|37.6|3.5|2,500|
|**ECASD40G686M020K00**|4|68|±<br>20|D4|7343|1.9|20|10.9|1.9|3,000|
|**ECASD40G826M016K00**|4|82|±<br>20|D4|7343|1.9|16|13.2|2.1|3,000|
|**ECASD40G157M016K00**|4|150|±<br>20|D4|7343|1.9|16|24.0|2.1|3,000|
|**ECASD60G187M012K00**|4|180|±<br>20|D6|7343|2.8|12|28.8|2.5|2,500|
|**ECASD60G227M010K00**|4|220|±<br>20|D6|7343|2.8|10|35.2|3.0|2,500|
|**ECASD90G337M008K00**|4|330|±<br>20|D9|7343|4.2|8|52.8|3.3|2,000|
|**ECASD40J106M055K00**|6.3|10|±<br>20|D4|7343|1.9|55|2.6|1.0|3,000|
|**ECASD40J226M045K00**|6.3|22|±<br>20|D4|7343|1.9|45|5.6|1.0|3,000|
|**ECASD40J336M025K00**|6.3|33|±<br>20|D4|7343|1.9|25|8.4|1.8|3,000|
|**ECASD40J476M025K00**|6.3|47|±<br>20|D4|7343|1.9|25|11.9|1.8|3,000|
|**ECASD40J686M015K00**|6.3|68|±<br>20|D4|7343|1.9|15|17.2|2.0|3,000|
|**ECASD40J107M015K00**|6.3|100|±<br>20|D4|7343|1.9|15|25.2|2.0|3,000|
|**ECASD60J157M010K00**|6.3|150|±<br>20|D6|7343|2.8|10|37.8|3.0|2,500|
|**ECASD60J187M010K00**|6.3|180|±<br>20|D6|7343|2.8|10|45.4|3.0|2,500|
|**ECASD90J227M010K00**|6.3|220|±<br>20|D9|7343|4.2|10|55.5|3.0|2,000|
|**ECASD41A106M055K00**|10|10|±<br>20|D4|7343|1.9|55|4.0|1.0|3,000|
|**ECASD41A226M028K00**|10|22|±<br>20|D4|7343|1.9|28|8.8|1.6|3,000|
|**ECASD41A336M025K00**|10|33|±<br>20|D4|7343|1.9|25|13.2|1.8|3,000|
|**ECASD41A476M025K00**|10|47|±<br>20|D4|7343|1.9|25|18.8|1.8|3,000|
|**ECASD61A686M015K00**|10|68|±<br>20|D6|7343|2.8|15|27.2|2.0|2,500|
|**ECASD91A107M010K00**|10|100|±<br>20|D9|7343|4.2|10|40.0|3.0|2,000|
|**ECASD91A157M010K00**|10|150|±<br>20|D9|7343|4.2|10|60.0|3.0|2,000|
|**ECASD41B106M055K00**|12.5|10|±<br>20|D4|7343|1.9|55|12.5|1.0|3,000|
|**ECASD41B156M045K00**|12.5|15|±<br>20|D4|7343|1.9|45|18.8|1.0|3,000|
|**ECASD41B226M030K00**|12.5|22|±<br>20|D4|7343|1.9|30|27.5|1.6|3,000|
|**ECASD41B336M025K00**|12.5|33|±<br>20|D4|7343|1.9|25|41.3|1.8|3,000|
|**ECASD61B476M020K00**|12.5|47|±<br>20|D6|7343|2.8|20|58.8|2.0|2,500|
|**ECASD61B566M020K00**|12.5|56|±<br>20|D6|7343|2.8|20|70.0|2.0|2,500|
|**ECASD91B107M012K00**|12.5|100|±<br>20|D9|7343|4.2|12|125.0|2.5|2,000|
|**ECASD41C685M070K00**|16|6.8|±<br>20|D4|7343|1.9|70|10.9|1.0|3,000|
|**ECASD41C106M060K00**|16|10|±<br>20|D4|7343|1.9|60|16.0|1.0|3,000|
|**ECASD41C156M040K00**|16|15|±<br>20|D4|7343|1.9|40|24.0|1.0|3,000|
|**ECASD61C226M030K00**|16|22|±<br>20|D6|7343|2.8|30|35.2|1.6|2,500|



6 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] 

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

## **Cautions for Use** 

c Cautions 

## <1>Prohibited Circuits 

ECAS series cannot be used on the following circuits. 

1. Time constant circuits, 2. Coupling circuits, 3. The circuits in which two or more ECAS series are connected in a series so as to raise the endurance voltage, 4. Circuits greatly affected by leakage current. 

<2>Polarity 

Polymer aluminum electrolytic capacitor is polarized. Please not to reverse the polarity when using. 

If reverse voltage is applied, it may damage the oxide film and the capacitor itself. 

<3>Operating Voltage 

When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. 

When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. 

- <4>Inrush Current Extreme inrush current may cause short circuit or leakage current increase. If the inrush current exceeds 20A, adding protection circuit is recommended. 

## <5>Allowable Ripple Current 

Please not to apply ripple current exceeding the allowable value specified in this document. If excessive current is applied, it may generate heat and the heat may damage the capacitor. 

The sum of DC voltage and the peak AC voltage shall not exceed the rated voltage. The sum of the DC voltage and the peak AC voltage shall not allow a voltage reversal. 

Maximum allowable ripple current = Allowable Ripple Current x *Temperature Compensation Coefficient 

*Temperature Compensation Coefficient = 1.00(TB45°C), 0.70(45°C<TB85°C), 0.25(85°C<TB105°C) 

## <6>Operating Temperature 

The operating temperature limit depends on the capacitor. 

qDo not apply temperature exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated 

temperature that will cover the operating temperature range. Also it is necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. 

wConsider the self-heating of the capacitor. The surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors. 

## <7>Reflow Soldering 

Please not to apply excessive force to the capacitor during insertion as well as after soldering. The excessive force may result in damage to electrode terminals and/or degradation of electrical performance. 

## <8>Operating Environment 

Confirm the environment in which the equipment will operate is under the specified conditions. Do not use the equipment under the following environments. 

qBeing spattered with water or oil. wBeing exposed to direct sunlight. eBeing exposed to Ozone, ultraviolet rays or radiation. 

rBeing exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.) 

tBeing exposed to excessive vibrations or mechanical shocks. yBeing exposed to condensable environments. 

<9>Failure Rate 

The failure rate is 0.5%/1,000h (60% Reliability) based on JIS C 5003. 

c Storage Conditions <1>Term of warranty for this product is two years after packaging in a moisture-proof bag, under the conditions below with sealed packaging. Recommended storage environment: Room temperature: 5-30°C 

Humidity : no more than 60%RH <2>Polymer aluminum electrolytic capacitors should not be stored in an atmosphere consisting of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). <3>Polymer aluminum electrolytic capacitors should be stored in a dry atmosphere, avoiding direct sunlight and condensation. If capacitors are kept at a higher humidity, the following problems may occur: 

qLeakage current will increase at the beginning of use and damage the circuit. 

wMoisture absorbed in a resin will evaporate and expand with heat of mounting and damage the mold resin. 

- <4>Please confirm a dry state with a humidity indicator card after open immediately. If 20% indication was in a pink state after opened, it is recommended to bake under the conditions below as countermeasures against the problems q and w in <3> above respectively. 

<5>The capacitors should be kept dry using desiccators or any other methods after unsealing the moisture-proof packaging. If more than two weeks has passed under the recommended storage environment specified above after unsealing the packaging, it is recommended to apply voltage and to bake under the conditions below, as countermeasures against the problems q and w in <3> above respectively. qRecommended voltage conditions: wRecommended baking conditions: Applied voltage : rated voltage Temperature: 60 (+0, -5) °C Time : 30 minutes Time : 168 hours Temperature : room temperature Current limiting resistance: 1000Ω (series connection) 

<6>This product meets MSL-3. 

7 

C90E.pdf May.17,2012 

!Note[• Please read rating and ][!][CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.] • This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

**==> picture [511 x 265] intentionally omitted <==**

**Cat. No. C90E-1**