EC5525PPAP-1

## **Proximity Sensors Capacitive Flat Pack Polycarbonate Housing Type EC 5525, DC** 

## 

## v 

- **Featuring** _**TRIPLESHIELD**_ **™ sensor protection** 

- **Adjustable sensing distance 4-25 mm** 

- **Rated operational voltage: 10-40 VDC** 

- **Output: DC 200 mA, NPN or PNP** 

- **Make and break switching function, LED indication** 

- **Capacitive, Inductive and Photoelectric flat pack se ries in PC hous ing, IP 67** 

- **High noise immunity** 

- **Universal flush and non-flush mountable** 

- **Plug and cable versions** 

**Product Descri tion p** 

## **Orderin Ke g y** 

**p g y EC 55 25 NPA P-1** Capacitive proximity switc­ switch ing.  Flat pack hous­ **Capacitive proximity switch** h es with sensing distance ing, size (WxHxD) 35 x 55 x 15 **Housing** ~~S~~ 16 mm flush mounted and mm made in polycarbonate. ~~T~~ **Rated operational distance** sensing distance 25 mm  non­ Easy mounting with only two **Output type** flush mount ed by adjustment. M4 screws. Ideal for use in **Housing material** 4­wire DC output with both material handling and plas tic **Connection type** ma ke (NO) and break (NC) ma chin ery applica tions. 

## **T e Selection yp** 

**Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. di mensions operating dist. NPN/cable NPN/plug PNP/cable PNP/plug W x H x D (Sn)**[1)] **Make & break swit. Make & break swit. Make & break swit. Make & break swit. Flush/non-flush** 35 x 55 x 15 16/25 mm **EC 5525 NPAP EC 5525 NPAP-1 EC 5525 PPAP EC 5525 PPAP-1** 

1) Object: Grounded steel plate 

## **S ecifications p** 

|**Rated operating dist.**(Sn)|4 to 25 mm|
|---|---|
||factoryset at 25 mm|
|**Sensitivity**|Adj. 270° single turnpot.meter|
|**Effective operating dist.** (Sr)|0.9 x Sn≤ Sr≤ 1.1 x S|
|**Usable operating dist.** (Su)<br>**Repeat accuracy **(R)<br>**Hysteresis**(H)|0.8 x Sr≤ Sn> 1.2 x Sr<br>≤ 5%<br>3 to 20% of sensingdistance|
|**Rated operational volt.**(UB)|10 to 40 VDC(ripple incl.)|
|**Ripple**|≤ 10%|
|**Rated operational current**(Ie)|)|
|Continuous|≤ 200 mA|
|**No-load supply current**(Io)<br>**Voltage drop **(Ud)<br>**Protection**|≤ 10 mA(no load)<br>≤ 2.5 VDC at max. load<br>Reverse polarity,<br>short­circuit, transients|



|**Frequency of operating**||
|---|---|
|**cycles**(f)|50 Hz|
|**Indication for output ON**|LED, yellow|
|**Environment**||
|Degree ofprotection|IP 67(Nema 1,3,4,6,13)|
|**Temperature**||
|Operating temperature|­25 to +80°C ( ­13 to +176°F)|
|Storage temperature|­40 to +85°C(­40 to +185°F)|
|**Housing material**|Polycarbonate(PC), grey|
|**Connection**||
|Cable|Grey, 2 m, 4 x 0.34 mm2|
||Oil proof, PVC|
|Plug (­1)|M12 x 1|
|Cable forplug (­1)|CON.14NF.. series|
|**Weight**(incl. nuts)|125 g (cable version)|
||40g (plugversion)|
|**Approvals**|UL, CSA|
|**CE-marking**|Yes|



**1** 

Specifications are subject to change without notice (29.07.2022) 

**EC 5525, DC** 

## **Dimensions** 

**==> picture [72 x 72] intentionally omitted <==**

**==> picture [500 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
35           35<br>17.5           15        17.5           15<br>Ø23           Ø23<br>Ø7.5<br> 4.5 7 4.5 7<br>Ø6.8 M12x1 plug<br>24.5<br>Ø5.2<br>24.5<br>Ø3 Ø3<br>9.5 LELE D 9.5 LED LED<br>EC 5525 .PAP PotentiometerPotentiometer EC 5525 .PAP-1 PotentiometerPotentiometer<br>23.5 23.5<br>55  57.5 55 57.5<br>3.5 3.5<br>4.5 4.5<br>18 12<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [244 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN<br>2 WH<br>4 BK<br>3 BU NPN<br>**----- End of picture text -----**<br>


**==> picture [245 x 88] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN<br>4 BK<br>2 WH<br>3 BU PNP<br>**----- End of picture text -----**<br>


## **Adjustment Guide** 

The environments in which cap­ acitive sensors are install ed can often be un stable re garding tem­ perature, humi dity , object distance and industrial (noise) interference. Because of this, Carlo Ga vazzi offers as standard features in all _TRIP LESHIELD_ ™ capacitive sensors a user­friendly sensitiv­ ity adjustment instead of having a fixed sensing range, extend ed 

sen sing range to accommodate mechanically demand ing are as, temperature stability to en sure minimum need for adjusting sensitivity if temperature varies and high immunity to elec tro­ magnetic interference (EMI). 

## **Note:** 

Sensors are factory set (default) to maximum rated sensing range. 

**==> picture [42 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensitivity<br>adjustment<br>**----- End of picture text -----**<br>


**==> picture [83 x 41] intentionally omitted <==**

**==> picture [12 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED<br>**----- End of picture text -----**<br>


## **Installation Hints** 

Capacitive sensors have the unique ability to detect al most all materials, either in li quid or solid form. Capa ci tive sensors can detect metallic as well as non­metallic ob jects, how­ ever, their traditional use is for non­metallic materials such as: 

- **Plastic Industry** 

- Resins, regrinds or moulded products. 

- **Chemical Industry** 

- Cleansers, fertilisers, liquid soaps, corrosives and petro­ chemicals. 

- **Wood Industry** 

- Saw dust, paper products, door and window frames. 

- **Ceramic & Glass  Industry** 

- Raw material, clay or finish ed products, bottles. 

- **Packaging Industry** Pack­ age inspection for level or contents, dry goods, fruits and vegetables, dairy prod­ ucts. 

Materials are detected due to their dielectric constant. The bigger the size of an object, the higher the density of material, the better or easier it is to detect the object. Nominal sensing di stan­ 

ce for a capacitive sensor is ref­ erenced to a grounded me tal plate (ST37). For addi tional infor­ mation regarding di elec tric rat­ ings of materials please re fer to Technical Information. 

**2** 

Specifications are subject to change without notice (29.07.2022) 

**EC 5525, DC** 

## **Installation Hints (cont.)** 

**==> picture [436 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/  Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch<br>power cables from any other power cables,<br>e.g. motor, contactor or solenoid cables<br>Incorrect<br>Correct<br>The cable should not be pulled A proximity switch should not serve as  Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Capacitive switch: EC55.. PAP(­1) 

## **Accessories** 

   - Plugs CON.14NF.. series 

- Screw driver 

- **Packaging:** Cardboard box 

- Installation & Adjustment Guide 

**3** 

Specifications are subject to change without notice (29.07.2022)