Image not available
Illustrative purposes only
E3SAT86
DISTANCE PHOTO
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: OMRON / PARTNER STOCK
- Product type:
- SVHC: No SVHC (25-Jun-2025)
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 952.65 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**Built-in Amplifier Photoelectric Sensor (Medium Size) E3S-A** CSM_E3S-A_DS_E_11_1 Be sure to read _Safety Precautions_ on page 10. ## **Ordering Information** ## **Built-in Amplifier Photoelectric Sensors** |**Sensing method**|**Appearance**<br>~~re~~|**Connection**<br>**method**<br>~~eee~~|**Sensing distance**<br>~~eee~~|**Sensing distance**<br>~~eee~~|**Sensing distance**<br>~~eee~~|**Sensing distance**<br>~~eee~~|**Sensing distance**<br>~~eee~~|**Functions**<br>~~ee~~|**Model**<br>~~eee~~|**Model**<br>~~eee~~| |---|---|---|---|---|---|---|---|---|---|---| ||||||||||**NPN output**<br>~~eee~~|**PNP output**| |Through-beam<br>Sensors*1|Horizontal<br>~~re~~|Pre-wired<br>~~eee~~<br>~~e~~|~~eee~~<br>~~e~~e|~~eee~~<br>e|7 m<br>~~eee~~<br>e<br>||7 m<br>~~ate~~|---<br>~~ee ~~|**E3S-AT11 2M**<br>Emitter<br>E3S-AT11-L<br>Receiver E3S-AT11-D<br> ~~eee~~|**E3S-AT31 2M**<br>Emitter<br>E3S-AT31-L<br>Receiver E3S-AT31-D| |||||||||Timer<br>Self Diagnosis<br>Turbo<br>External<br>Diagnosis<br>~~ee~~|**E3S-AT21 2M**<br>Emitter<br>E3S-AT21-L<br>Receiver E3S-AT21-D<br>~~ee~~|**E3S-AT41 2M**<br>Emitter<br>E3S-AT41-L<br>Receiver E3S-AT41-D<br>~~ee~~| |||Connector<br>(M12)<br>~~e~~||||||---<br>~~ee~~|**E3S-AT16**<br>Emitter<br>E3S-AT16-L<br>Receiver E3S-AT16-D<br>~~ee~~|**E3S-AT36**<br>Emitter<br>E3S-AT36-L<br>Receiver E3S-AT36-D<br>~~ee~~| ||||~~e~~e|e|e|||||| ||Vertical|Pre-wired<br>~~e~~||||||---<br>~~ee ~~|**E3S-AT61 2M**<br>Emitter<br>E3S-AT61-L<br>Receiver E3S-AT61-D<br> ~~ee~~|**E3S-AT81 2M**<br>Emitter<br>E3S-AT81-L<br>Receiver E3S-AT81-D<br>~~ee~~| ||||~~e~~e<br>~~—||~~|e<br>~~|~~||||||| |||||||||Timer<br>Self Diagnosis<br>Turbo<br>External<br>Diagnosis|**E3S-AT71 2M**<br>Emitter<br>E3S-AT71-L<br>Receiver E3S-AT71-D<br>**E3S-AT66**|**E3S-AT91 2M**<br>Emitter<br>E3S-AT91-L<br>Receiver E3S-AT91-D<br>**E3S-AT86**| |||Connector<br>(M12)<br>~~—|~~||||||---<br>~~ate~~|**E3S-AT66**<br>Emitter<br>E3S-AT66-L<br>Receiver E3S-AT66-D<br>~~ate~~|**E3S-AT86**<br>Emitter<br>E3S-AT86-L<br>Receiver E3S-AT86-D| |Retro-reflective<br>Sensors|Horizontal<br>~~jes}~~<br>~~Sel~~|Pre-wired<br>~~jes}~~<br>~~—|~~<br>~~Sel~~|~~jes}~~<br>~~—||~~<br>~~Sel~~|~~|~~<br>~~Sel~~|*2<br>2 m<br>(100 mm)<br> <br> <br>||~~ate~~<br> ~~||~~<br>~~fe~~<br> ~~pT~~|---<br>~~ate~~|**E3S-AR11 2M**<br>~~ate~~|**E3S-AR31 2M**| |||||||||Timer<br>Self Diagnosis<br>Turbo<br>External<br>Diagnosis<br>~~ate~~<br>~~||~~|**E3S-AR21 2M**<br>~~ate~~<br>~~||~~|**E3S-AR41 2M**| |||Connector<br>(M12)<br>~~jes}~~<br>~~—|~~<br>~~Sel~~||||||---<br>~~ate~~<br>~~||~~|**E3S-AR16**<br>~~ate~~<br>~~||~~|**E3S-AR36**| ||||~~jes}~~<br>~~—||~~<br>~~Sel~~|~~|~~<br>~~Sel~~||||||| ||Vertical<br>~~jes}~~<br>~~Sel~~<br>~~et~~|Pre-wired<br>~~jes}~~<br>~~—|~~<br>~~Sel~~<br>~~|~~<br>~~et~~|~~jes}~~<br>~~—| |~~<br>~~Sel~~<br>~~et ~~|(100 mm)<br>~~| ~~<br>~~Sel ~~<br>||||---<br>~~ate~~<br>~~||~~<br>~~fe~~<br>~~pT~~|**E3S-AR61 2M**<br>~~ate~~<br>~~||~~<br>~~fe~~<br>~~pT~~|**E3S-AR81 2M**| |||||||||Timer<br>Self Diagnosis<br>Turbo<br>External<br>Diagnosis<br>~~fe~~<br>~~pT~~|**E3S-AR71 2M**<br>~~fe~~<br>~~pT~~|**E3S-AR91 2M**| |||Connector<br>(M12)<br>~~et~~||||||---<br>~~pT~~|**E3S-AR66**<br>~~pT~~|**E3S-AR86**| *2. Values in brackets are the minimum required distance between the Sensor and Reflector. **1** omrRONn ~~a~~ **E3S-A** |**Sensing method**|**Appearance**|**Connection**<br>**method**|**Sensing distance**|**Sensing distance**|**Sensing distance**|**Sensing distance**|**Sensing distance**|**Sensing distance**|**Functions**|**Model**|**Model**| |---|---|---|---|---|---|---|---|---|---|---|---| |||||||||||**NPN output**|**PNP output**| |Diffuse-reflective<br>Sensors|Horizontal|Pre-wired|||||view)||---|**E3S-AD13 2M**|**E3S-AD33 2M**| ||||100 m|||m (wide|||Timer<br>Self Diagnosis|**E3S-AD23 2M**|**E3S-AD43 2M**| ||||||||||||| |||||||mm|||---|**E3S-AD11 2M**|**E3S-AD31 2M**| |||||200|||||Timer<br>Self Diagnosis<br>Turbo|**E3S-AD21 2M**|**E3S-AD41 2M**| ||||||||||||| |||||||00 mm|||---<br><br>|**E3S-AD12 2M**|**E3S-AD32 2M**| ||||7||||||Timer<br>Self Diagnosis<br>Turbo|**E3S-AD22 2M**|**E3S-AD42 2M**| |||Connector<br>(M12)|100 m|||m (wide|view)||---|**E3S-AD18**|**E3S-AD38**| |||||200||mm||||**E3S-AD16**|**E3S-AD36**| ||||||7|00 mm||||**E3S-AD17**|**E3S-AD37**| ||Vertical|Pre-wired|||||view)||---|**E3S-AD63 2M**|**E3S-AD83 2M**| ||||100 m|||m (wide|||Timer<br>Self Diagnosis|**E3S-AD73 2M**|**E3S-AD93 2M**| ||||||||||||| |||||||mm|||---|**E3S-AD61 2M**|**E3S-AD81 2M**| |||||200|||||Timer<br>Self Diagnosis<br>Turbo|**E3S-AD71 2M**|**E3S-AD91 2M**| ||||||||||||| |||||||00 mm|||---|**E3S-AD62 2M**|**E3S-AD82 2M**| ||||||7||||Timer<br>Self Diagnosis|**E3S-AD72 2M**|**E3S-AD92 2M**| ||||||||||||| |||Connector<br>(M12)|100 m|||m (wide|view)||---|**E3S-AD68**|**E3S-AD88**| |||||200||mm||||**E3S-AD66**|**E3S-AD86**| ||||||7|00 mm||||**E3S-AD67**|**E3S-AD87**| ## **Accessories (Order Separately) Insert-type Long Slit** |**Name**|**Slit width**|**Sensing**<br>**distance**|**Minimum sensing**<br>**object(typical)**|**Model**|**Quantity**|**Remarks**| |---|---|---|---|---|---|---| |Slits|0.5 mm×11.1 mm|500 mm|0.2-mm dia.|**E39-S46**|1 of each for Emitter/<br>Receiver (4 Slits total)|Slits can be used with<br>the E3S-AT@@<br>Through-beam<br>Sensor.➜Page 10| ||1 mm×11.1 mm|1.1 m|0.4-mm dia.|||| |Supporter|2 mm×13.6 mm|2.5 m|0.8-mm dia.||1 of each for Emitter/<br>Receiver(2 Slits total)|| ## **Mutual Interference Prevention Filters** |**Sensing distance**|**Model**|**Quantity**|**Remarks**| |---|---|---|---| |2.4 m|**E39-E6**|2 of each for Emitter/Receiver<br>(4 Filters total)|Can be used with the E3S-AT@@Through-beam Sensor.<br>➜Page 11| ## **Reflectors/Other Accessories** |**Name**|**Sensing distance(typical)**|**Model**|**Quantity**|**Remarks**| |---|---|---|---|---| |Reflectors|2 m (100 mm)*<br>(rated value)|**E39-R1**|1|Provided with E3S-AR@@Retro-reflective Sensor.| |Small Reflectors|1.3 m(100 mm)*|**E39-R3**|1|---| ||600 mm (70 mm)*|**E39-R4**|1|---| |Tape Reflectors|450 mm(100 mm) *|**E39-RS1**|1|Enables MSR function.| ||700 mm (100 mm)*|**E39-RS2**|1|| ||900 mm (100 mm)*|**E39-RS3**|1|| |Optical Axis<br>Confirmation Reflector|---|**E39-R5**|1|Used to check optical axis for the E3S-AT@@<br>Through-beam Sensor.| Note: When using any Reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide. *Values in brackets are the minimum required distance between the Sensor and Reflector. **2** **E3S-A** ## **Mounting Brackets/Other** **Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required.** |**Appearance**|**Model**|**Quantity**|**Remarks**| |---|---|---|---| ||**E39-L69**|1|Provided with E3S-A Horizontal Sensors.<br>Two Brackets are provided with a Through-<br>beam Sensor.| ||**E39-L70**|1|Provided with E3S-A Vertical Sensors.<br>Two Brackets are provided with a Through-<br>beam Sensor.| ||**E39-L59**|1|Provided with E3S-A Vertical Pre-wired<br>Sensors.| ||**E39-L81**|1|Provided with E3S-A Vertical ConnectSor<br>Sensors.| ||**E39-L97** *1|1|Protective Cover for Horizontal Sensors| ||**E39-L98** *2|1|Protective Cover for Vertical Sensors| ||**E39-L60**|1|Close Mounting Plate:<br>Provided with E3S-A Connector Sensors.<br>Two Plates are provided with a Through-<br>beam Sensor.| Note: If a Through-beam Model is used, order two Mounting Brackets, one for the Emitter and one for the Receiver. *1. Mount a Sensor with a Connector carefully because the Sensor I/O Connector will come into contact with the Mounting Bracket or Mounting Plate. *2. Usage is not possible with Sensors with Connectors. ## **Sensors I/O Connectors** |**Model**|**Quantity**|**Remarks**| |---|---|---| |**E39-G2**|1|Provided withproduct.| ## **Sensors I/O Connectors** |**Cable**|**Appearance**|**Appearance**|**Cable type**|**Cable type**|**Model**| |---|---|---|---|---|---| |Standard|Straight||2 m|3-wire|**XS2F-D421-DC0-F**| ||||5 m||**XS2F-D421-GC0-F**| ||L-shaped||2 m||**XS2F-D422-DC0-F**| ||||5 m||**XS2F-D422-GC0-F**| Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter. **3** **E3S-A** ## **Ratings and Specifications** |**Sensing method**|**Sensing method**|**Sensing method**|**Through-beam**<br>**Sensors**|**Retro-reflective**<br>**Sensors**<br>**(with MSR function)**|**Diffuse-reflective Sensors**|**Diffuse-reflective Sensors**|**Diffuse-reflective Sensors**| |---|---|---|---|---|---|---|---| |**Item**<br>**Model**|||**E3S-AT11, 16, 21, 31,**<br>**36, 41, 61, 66, 71, 81,**<br>**86, 91**|**E3S-AR11, 16, 21, 31,**<br>**36, 41, 61, 66, 71, 81,**<br>**86, 91**|**E3S-AD13, 18, 23, 33,**<br>**38, 43, 63, 68, 73, 83,**<br>**88, 93**|**E3S-AD11, 16, 21, 31,**<br>**36, 41, 61, 66, 71, 81,**<br>**86, 91**|**E3S-AD12, 17, 22, 32,**<br>**37, 42, 62, 67, 72, 82,**<br>**87, 92**| |**Sensing distance**|||7 m|2 m (100 mm)*1<br>(When using E39-R1)|100 mm (wide view)<br>(white paper 100×<br>100 mm)|10 to 200 mm<br>(white paper 100×<br>100 mm)|700 mm<br>(white paper 200×<br>200 mm)| |**Standard sensing object**|||Opaque:<br>10-mm dia. min.|Opaque:<br>75-mm dia. min.|---||| |**Differential travel**|||---||20% max. of sensing<br>distance|10% max. of sensing<br>distance|20% max. of sensing<br>distance| |**Directional angle**|||Both Emitter and<br>Receiver: 3°to 15°|3 to 10°|---||| |**Light source (wavelength)**|||Red LED (700 nm)||Infrared LED (880 nm)|Red LED (700 nm)|Infrared LED (880 nm)| |**Power supply voltage**|||10 to 30 VDC, including ripple (p-p) 10%||||| |**Current consumption**|||Both Emitter and<br>Receiver: 20 mA max.<br>(plus approx. 15 mA with<br>turbo function)|30 mA max. (plus<br>approx. 15 mA with<br>turbo function)|35 mA max.|30 mA max. (plus<br>approx. 15 mA with<br>turbo function)|35 mA max.| |**Control output**|||Load power supply voltage: 30 VDC max., Load current: 100 mA max. (residual voltage: 1 V max.)<br>Open-collector output (NPN or PNP depending on model), Light-ON/Dark-ON selectable||||| |**Self-diagnostic output (Only**<br>**on Sensors with self-diagnos-**<br>**tic outputs)**|||(Only Sensors with self-diagnostic function) Load power supply voltage: 30 VDC max.,<br>Load current: 50 mA max. (residual voltage: 1 V max.),<br>Open-collector output (NPN or PNP depending on model)||||| |**External**<br>**diagnostic**<br>**input**<br>**(Only on**<br>**Sensors with**<br>**external**<br>**diagnostic**<br>**outputs)**||**Input**<br>**voltage**|NPN<br>with Emitter OFF: 0 V short-circuit or 1.5 V max.<br>(source current: 1 mA max.)<br>with Emitter ON: Open<br>(leakage current: 0.1 mA max.)<br>PNP<br>with Emitter OFF: +DC short-circuit or−1.5 VDC<br>max. (sink current: 3 mA max.)<br>with Emitter ON: Open<br>(leakage current: 0.1 mA max.)||---||| |||**Response**<br>**time**|0.5 ms max.||||| |**Protection circuits**|||Power supply reverse<br>polarity protection,<br>Output short-circuit<br>protection|Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention|||| |**Response time**|||Operation or reset: 0.5 ms max.||||| |**Sensitivity adjustment**|||Two-turn endless adjuster with an indicator||||| |**Timer function (Only on Sen-**<br>**sors with the timer function)**|||0 to 100 ms OFF-delay variable adjuster||||| |**Turbo function (Only on Sen-**<br>**sors with the turbo function)**|||Yes (with turbo switch)||||---| |**Ambient illumination (Receiv-**<br>**er side)**|||Incandescent lamp: 5,000 lx max.<br>Sunlight: 10,000 lx max.||||| |**Ambient temperature**|||Operating:−25°C to 55°C (with no icing or condensation)<br>Storage:−40°C to 70°C (with no icing or condensation)||||| |**Ambient humidity**|||Operating: 35% to 85% (with no condensation)<br>Storage: 35% to 95% (with no condensation)||||| |**Insulation resistance**|||20 MΩmin. at 500 VDC between current-carrying parts and case||||| |**Dielectric strength**|||1,000 VAC, 50/60 Hz for 1 min. between current-carrying parts and case||||| |**Vibration resistance**<br>**(destruction)**|||10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions||||| |**Shock resistance**<br>**(destruction)**|||Destruction: 500m/s2, 3 times each in X, Y, and Z directions||||| |**Degree of protection**|||IEC IP67; NEMA: 4X (indoors only)*2||||| |**Connection method**|||Pre-wired (standard length: 2 m) or M12 connector||||| |**Weight (packed state)**|||Pre-wired cable:<br>Approx. 150 g<br>Connector: Approx. 70 g|Pre-wired cable:<br>Approx. 110 g<br>Connector: Approx. 60 g|Pre-wired cable: Approx. 90 g<br>Connector: Approx. 50 g||| |**Material**|**Case**||PBT||||| ||**Lens**||Denatured polyallylate||||| ||**Mounting**<br>**Bracket**||Stainless steel (SUS304)||||| |**Accessories**|||Mounting bracket (with screws), Sensitivity adjustment driver, Sensitivity adjusting knob, Instruction sheet, Close mounting plate<br>(only for Sensors with connectors), and Reflector (only for Retro-reflective Sensors)||||| *1. Values in brackets are the minimum required distance between the Sensor and Reflector. *2. National Electrical Manufacturers Association **4** **E3S-A** **Engineering Data (Reference Value)** ## **Parallel Sensing Range** ## **Through-beam Sensors E3S-AT** @@ **Through-beam Sensors E3S-AT** @@ **+ E39-S46 (Slit Sold Separately)** **Through-beam Sensors** **E3S-AT** @@ **+ E39-E6 (Filter Sold Separately)** **==> picture [510 x 140] intentionally omitted <==** **----- Start of picture text -----**<br> 500 200 200<br>Slit width: 2 mm<br>400 Y Y<br>Slit width: 1 mm<br>300<br>100 X 100 X<br>200 Y<br>100<br>X<br>0 0 0<br>2 4 6 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6<br>−100 Distance X (m) Distance X (m) Distance X (m)<br>−200<br>−100 −100<br>−300<br>−400 Slit width: 0.5 mm<br>−500 −200 −200<br>Distance Y (mm) Distance Y (mm) Distance Y (mm)<br>**----- End of picture text -----**<br> **Parallel Sensing Range** ## **Retro-reflective Sensors** ## **E3S-AR** @@ **+ E39-R1 (with Reflector)** ## **Sensing Range** ## **Diffuse-reflective Sensors** **E3S-AD** @ **1/AD** @ **2/AD** @ **3/AD** @ **6/AD** @ **7/AD** @ **8** **==> picture [356 x 142] intentionally omitted <==** **----- Start of picture text -----**<br> 100 40<br>E39-R1 Reflector Sensing object: white paper<br>80 30 E3S-AD@1/@3/@6/@8: 100 × 100 mm Y<br> E3S-AD@2/@7: 200 × 200 mm<br>60 X<br>20 E3S-AD@1/@6<br>40 Y<br>10<br>20<br>X<br>0 0<br>0.5 1.0 1.5 2.0 2.5 400 600 800 Distance X (m)<br>−20 Distance X (m) −10 200<br>−40 E3S-AD@2/@7<br>−20<br>−60<br>−80 −30 E3S-AD@3/@8<br>−100 −40<br>Distance Y (mm) Distance Y (mm)<br>**----- End of picture text -----**<br> ## **Excess Gain vs. Set Distance** ## **Through-beam Sensors E3S-AT** @@ ## **Retro-reflective Sensors** **E3S-AR** @@ **+ E39-R1 (with Reflector)** **==> picture [333 x 154] intentionally omitted <==** **----- Start of picture text -----**<br> 500 100 E39-R1 Reflector<br>300<br>50<br>30<br>100<br>50<br>10<br>30<br>5<br>10<br>3<br>5<br>3 Oper-<br>ating 1<br>level<br>Oper-<br>ating 1<br>level 0 3 5 7 10 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6<br>Distance (m) Distance (m)<br>Excess gain ratio (times) Excess gain ratio (times)<br>**----- End of picture text -----**<br> **5** **E3S-A** **==> picture [511 x 210] intentionally omitted <==** **----- Start of picture text -----**<br> Diffuse-reflective Sensor Diffuse-reflective Sensor Sensing Object Size vs. Sensing<br>Distance<br>E3S-AD @ 1/AD @ 2/AD @ 3/AD @ 6/AD @ 7/ E3S-AD @ 1/AD @ 2/AD @ 3/AD @ 6/AD @ 7/ E3S-AD @ 1/AD @ 2/AD @ 3/AD @ 6/AD @ 7/<br>AD @ 8 (Detection of White Paper) AD @ 8 (Detection of Black Paper) AD @ 8<br>500300 Sensing object: White paperE3S-AD@1/@3/@6/@8: 100 × 100 mm 10050 SensinE3S-ADg ob@1/ject: Black @3/@6/@p8: 100 aper × 100 mm 1.2 Sensing object: white paper<br> E3S-AD@2/@7: 200 × 200 mm E3S-AD@2/@7: 200 × 200 mm OFF<br>30 1 ON<br>100 E3S-AD@2/@7<br>50 10 0.8<br>30<br>5<br>E3S-AD@2/@7<br>3 E3S 0.6<br>E3S-AD@2/@7 -AD@1/@6<br>10<br>Oper-<br>5 ating 1 0.4<br>3 E3S level0.5 E3S-AD@1/@6 OFFON<br>-AD @ 1/ @ 6<br>Oper- 0.3 0.2 OFF<br>ating 1 E3S-AD@3/@8 E3S-AD@3/@8 ON<br>level<br>0.50 E3S-AD 0.2 @3/@8 0.4 0.6 0.8 1 1.2 0.10 200 400 600 800 0 50 × 50 100 × 100 200 × 200 300 × 300<br>Distance (m) Distance (mm) Side of object (mm)<br>Excess gain ratio (times) Excess gain ratio (times) Distance (m)<br>**----- End of picture text -----**<br> ## **I/O Circuit Diagrams** ## **NPN Output** **==> picture [513 x 278] intentionally omitted <==** **----- Start of picture text -----**<br> Mode<br>Operation<br>Model Timing charts selector Output circuit<br>mode<br>switch<br>E3S-AT11 * Incident light Through-beam Receivers, Retro-reflective Sensors, Diffuse-reflective<br>E3S-AT16 E3S-AT61 ** Light indicator(red)No incident lightOFFON L Side SensorsLight Stability 1 Brown<br>E3S-AT66 * Light-ON Outputtransistor OFFON (LIGHT ON) (red)indi-cator indicator(green)Photo- (Control output) Load<br>Load Operate electricSensor 4 Black (Relay) 10 to<br>E3S-AR11E3S-AR16 (e.g., relay) Reset(Between brown and black) maincircuit ZD 100 mA max. 30 VDC<br>Blue<br>E3S-AR61 3<br>Incident light<br>E3S-AR66<br>No incident light<br>E3S-AD11 Light indicator(red) OFFON D Side Connector Pin Arrangement<br>E3S-AD16E3S-AD61 Dark-ON Outputtransistor OFFON (DARK ON) 2 1 4<br>Load Operate 3<br>E3S-AD66 (e.g., relay) Reset<br>E3S-AD12 (Between brown and black) Note: Pin 2 is not used.<br>E3S-AD17 Through-beam Emitters<br>E3S-AD62 Brown Connector Pin Arrangement<br>E3S-AD67E3S-AD13E3S-AD18 Powerindicator(red) - Photo-electricSensor 1 10 to 30 VDC 2 13 4<br>main<br>E3S-AD63 circuit Blue<br>E3S-AD68 3 Note: Pins 2 and 4 are not used.<br>**----- End of picture text -----**<br> - *Models numbers for Through-beam Sensors (E3S-AT@@) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT11-L 2M), the model number of the Receiver, by adding "-D" (example: E3S-AT11-D 2M). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **6** **E3S-A** |**Model**|**Operation**<br>**mode**|**Timing charts**|**Timing charts**|**Timing charts**|**Mode**<br>**selector**<br>**switch**|||||||**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |E3S-AT21*<br>E3S-AT71*<br>E3S-AD21<br>E3S-AD71<br>E3S-AD22<br>E3S-AD72<br>E3S-AD23<br>E3S-AD73|Light-ON|T<br>T: OFF-delay timer (0 to 100 ms)<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between brown and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||L Side<br>(LIGHT ON)|Through-beam Receivers<br>Light<br>indica-<br>tor<br>Stability<br>indicator<br>(green)<br>Photo-<br>electric<br>Sensor<br>main<br>circuit<br>(red)||||||, Diffuse-reflective Sensors<br>(Self-diagnostic<br>output)<br>ZD<br>ZD<br>Load<br>(relay)<br>Brown<br>Blue<br>Black<br>(Control<br>output)<br>100 mA max.<br>10 to<br>30 VDC<br>Load<br>(relay)<br>Orange<br>50 mA max.|||||||| ||||||||Light<br>indica-<br>tor<br>(red)|Stability<br>indicator<br>(green)<br>Photo-<br>electric<br>Sensor<br>main<br>circuit|||||||||||| |||||||||||||ZD<br>ZD<br>100 mA m<br>50 mA m|||ax.||Loa<br>(rela|d<br>y)|| ||||||||||||||ZD<br>ZD<br> <br>50 mA m||<br>ax.|Loa<br>(rel<br>Black<br>(Control<br>output)|||| ||Dark-ON|T<br>T: OFF-delay timer (0 to 100 ms)<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between brown and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||D Side<br>(DARK ON)|||||||||ZD|||||| ||||||||||||||||||||| ||||||||||||||||||||| ||||||||||||||||||||| ||---|External<br>diagnostic<br>input<br>Emitter LED<br>Indicator<br>(red)<br>ON<br>OFF<br>ON<br>OFF<br>ON<br>OFF<br>(Between blue and pink)|||---|Through-beam Emitters<br>Power in<br>(red)<br>Phot<br>elec<br>Sen<br>main<br>circu||||||dicator<br>Brow|||0 V<br>(External<br>diagnostic input)<br>n<br>10 to 30 VDC||||| ||||||||||Power in<br>(red)<br>Phot<br>elec<br>Sen<br>main<br>circu|||dicator|||||||| |||||||||||||o-<br>tric<br>sor<br><br>it||Pink|||||| ||||||||||||||||||||| ||||||||||||||||||||| |E3S-AR21<br>E3S-AR71|Light-ON|T<br>T: OFF-delay timer (0 to 100 ms)<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between brown and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||L Side<br>(LIGHT ON)|Retro-reflective Sensors<br>Light<br>indica-<br>tor<br>Stability<br>indicator<br>(green)<br>Photo-<br>electric<br>Sensor<br>main<br>circuit<br>(red)|||||||||2 K<br>(External<br>diagnostic input)<br>(Self-diagnostic<br>output)<br>Load<br>(relay)<br>Brown<br>Blue<br>Black<br>(Control<br>output)<br>ax.<br>10 to<br>30 VDC<br>Load<br>(relay)<br>Orange<br>max.<br>Pink||||| ||||||||Light<br>indica-<br>tor<br>(red)|Stability<br>indicator<br>(green)<br>Photo-<br>electric<br>Sensor<br>main<br>circuit|||||||||||| |||||||||||||1<br>ZD<br>100 mA m<br>50 mA<br>ZD|||ax.||Lo<br>(rel|ad<br>ay)|| ||||||||||||||1<br>ZD<br>50 mA<br>ZD||max.|Lo<br>(rel<br>Black<br>(Control<br>output)|||| ||Dark-ON|T: OFF-delay timer (0<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between<br>Output<br>transistor<br>Load<br>(e.g., relay)||T<br>to 100 ms)<br>brown and black)|D Side<br>(DARK ON)|||||||||1<br>ZD|2 K<br><br>||||| ||||||||||||||||||||| ||||||||||||||||||||| |||||||||||||||||Blue|||| |||||T|||||||||||||||| ||||||||||||||||||||| ||||||||||||||||||||| *Models numbers for Through-beam Sensors (E3S-AT@1) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT21-L 2M), the model number of the Receiver, by adding "- D" (example: E3S-AT21-D 2M). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. ## **Structure of Sensor I/O Connector** **==> picture [214 x 53] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal No.<br>2 1 2 Brown<br>1 3 3 Blue<br>4 4 Black<br>XS2F-D421-DC0-F<br>**----- End of picture text -----**<br> |**Classification**<br>|**Wire color**<br>Brown|**Connection Pin No.**<br>1|**Application**<br>+V| |---|---|---|---| |For DC|---|2|---| ||Blue|3|0 V<br>| ||Black|4|Output| Note: Pin No. 2 is not used. **7** **E3S-A** ## **PNP Output** |**Model**|**Operation**<br>**mode**|**Timing charts**|**Timing charts**|**Timing charts**|**Timing charts**|**Timing charts**|**Mode**<br>**selector**<br>**switch**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**|**Output circuit**| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |E3S-AT31*<br>E3S-AT36*<br>E3S-AT81*<br>E3S-AT86*<br>E3S-AR31<br>E3S-AR36<br>E3S-AR81<br>E3S-AR86<br>E3S-AD31<br>E3S-AD36<br>E3S-AD81<br>E3S-AD86<br>E3S-AD32<br>E3S-AD37<br>E3S-AD82<br>E3S-AD87<br>E3S-AD33<br>E3S-AD38<br>E3S-AD83<br>E3S-AD88|Light-ON|Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between blue and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||||L Side<br>(LIGHT ON)<br> <br><br>D Side<br>(DARK ON)|Through-beam Receivers, Retro-reflective Sensors, Diffuse-reflective<br>Sensors<br>**Connector Pin Arrangement**<br>Note: Pin 2 is not used.<br>1<br>3<br>4<br>Light<br>indica-<br>tor<br>Stability<br>indicator<br>Photo-<br>electric<br>Sensor<br>main<br>circuit<br>ZD<br>Load<br>Brown<br>Blue<br>Black (Control output)<br>(Relay)<br>10 to<br>30 VDC<br>(red)<br>(green)<br>100 mA max.<br>3<br>1<br>2<br>4|||||||||| |||||||||Light<br>indica-<br>tor<br>(red)|Stability<br>indicator<br>Photo-<br>electric<br>Sensor<br>main<br>circuit<br>(green)|||1|||||| |||||||||||||3<br>4<br>ZD||4<br>ZD||Load<br>Blue<br>Black (Control output)<br>(Relay)<br>100 mA max.|| |||||||||||||||||Loa<br>Blue<br>100 mA max.|| ||Dark-ON|Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between blue and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||||||||||||||| ||||||||||||||||||| ||||||||||||||||||| ||Through-beam Model Emitters|||Light<br>indica-<br>tor<br>P<br>el<br>S<br>m<br>cir<br>(red)|||1<br>Brown||10 to<br>30 VD|||<br>C<br>**Connector Pin Arrangement**<br>Note: Pins 2 and 4 are not used.<br>3<br>1<br>2<br>4|||||| ||||||Light<br>indica-<br>tor<br>P<br>el<br>S<br>m<br>cir<br>(red)||1||||||||||| |||||||||Blue|||||||||| |||||||P<br>el<br>S<br>m<br>cir|hoto-<br>ectric<br>ensor<br>ain<br>cuit||||||||||| |E3S-AT41*<br>E3S-AT91*<br>E3S-AD41<br>E3S-AD91<br>E3S-AD42<br>E3S-AD92<br>E3S-AD43<br>E3S-AD93|Light ON|T<br>T: OFF-delay timer (0 to 100 ms)<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between blue and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||||L Side<br>(LIGHT ON)<br> <br>D Side<br>(DARK ON)|Through-beam Receivers, Diffuse-reflective Sensors<br>(Self-diagnostic<br>output)<br>ZD<br>ZD<br>Light<br>indica-<br>tor<br>Stability<br>indicator<br>(green)<br>Photo-<br>electric<br>Sensor<br>main<br>circuit<br>Load<br>(relay)<br>Brown<br>Blue<br>Black<br>(Control<br>output)<br>100 mA max.<br>10 to<br>30 VDC<br>(red)<br>Load<br>(relay)<br>Orange<br>50 mA max.|||||||||| |||||||||Light<br>indica-<br>tor<br>(red)|Stability<br>indicator<br>(green)<br>Photo-||||||||| ||||||||||||||ZD<br>ZD<br>100 mA ma<br>50 mA||max.|(Self-diagnostic<br>output)<br>Load<br>(relay)<br>Black<br>(Control<br>output)<br>Load<br>(relay)<br>Orange|| ||Dark ON|T<br>T: OFF-delay timer (0 to 100 ms)<br>Incident light<br>No incident light<br>ON<br>OFF<br>ON<br>OFF<br>Operate<br>Reset<br>Light indicator<br>(red)<br>(Between blue and black)<br>Output<br>transistor<br>Load<br>(e.g., relay)|||||||||||||||| ||||||||||||||||x.|Loa<br>(rela<br>Black<br>(Control<br>output)|| |||||||||||||||||Lo<br>(rel|ad<br>ay)| ||||||||||||||||||| ||||||||||||||||||| ||---|External<br>diagnostic<br>input<br>Emitter LED<br>Indicator<br>(red)<br>ON<br>OFF<br>ON<br>OFF<br>ON<br>OFF<br>(|||||---<br>|Through-beam Emitters<br>Power indi<br>(red)<br>Phot<br>elect<br>Sens<br>main<br>circui||||cator<br>Brow|||0 V<br>(External<br>diagnostic input)<br>n<br>e<br>10 to 30 VDC<br>||| |||||||||||Power indi<br>(red)<br>Phot<br>elect<br>Sens<br>main<br>circui||cator|||||| |||||||||||||o-<br>ric<br>or<br>t|||||| |||||||||||||||Blu<br>Pink|||| ||||||||||||||||||| *Models numbers for Through-beam Sensors (E3S-AT@@) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT31-L 2M), the model number of the Receiver, by adding "-D" (example: E3S-AT31-D 2M). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **8** **E3S-A** **==> picture [512 x 203] intentionally omitted <==** **----- Start of picture text -----**<br> Mode<br>Operation<br>Model Timing charts selector Output circuit<br>mode<br>switch<br>Incident light Retro-reflective Sensors<br>No incident light<br>T<br>Light indicator ON<br>(red) OFF L Side Brown<br>Light-ON Output ON<br>E3S-AR41E3S-AR91 Load(e.g., relay)transistorT: OFF-delay timer (0 to 100 ms)Incident lightOperateResetOFF(Between blue and black) (LIGHT ON) Lightindica-tor(red) Stabilityindicator(green) Photo-electricSensor4.4 K ZD Z50 mA max.D OrangePink(Control output)(Self-diagnosticoutput)(External diagnostic input)Load 10 to 30 VDC<br>No incident light maincircuit 100 mA max. Black (relay)<br>Light indicator ON Load<br>(red) OFF (relay)<br>Dark-ON Output ON T D Side Blue<br>transistor OFF (DARK ON)<br>Load Operate<br>(e.g., relay) Reset<br>(Between brown and black)<br>T: OFF-delay timer (0 to 100 ms)<br>**----- End of picture text -----**<br> ## **Structure of Sensor I/O Connector** |2<br>4<br>1<br>3<br>1<br>2<br>3<br>4<br>Ter|<br> <br> <br> <br>minal No.<br>XS2F-D421-DC0-F<br>Brown<br>Blue<br>Black|<br>**Classification**<br>For DC|**Wire color**|**Connection Pin No.**|**Application**| |---|---|---|---|---|---| ||||Brown|1|+V| ||||---|2|---| ||||Blue|3|0 V| ||||Black|4|Output| Note: Pin 2 is not used. ## **Adjustment Methods** ## **Sensitivity Adjustment for Diffuse-reflective Sensors Set to Light ON** |**Item**|**Sensing condition**|**Sensitivity adjuster**|**Indicators**|**Procedure**| |---|---|---|---|---| |1) Position A|Photoelectric<br>Sensor<br>Sensing object<br>Backg-<br>round<br>object|Min.<br>Max.<br>(A)|Stability<br>indicator<br>(green)<br>Light<br>indicator<br>(red)<br>ON→ **OFF**<br>OFF→ **ON**|Locate a sensing object at the sensing<br>distance, set the sensitivity adjuster to<br>the minimum scale position, and<br>gradually increase sensitivity by turning<br>the sensitivity adjuster clockwise until the<br>incident light indicator (red LED) is ON.<br>Position A is where the indicator has<br>turned ON.| |2) Position B|Photoelectric<br>Sensor<br>Sensing object<br>Backg-<br>round<br>object|Min.<br>Max.<br>(B)<br>(C)|ON→ **OFF**<br>ON→ **OFF**<br>Stability<br>indicator<br>(green)<br>Light<br>indicator<br>(red)|Position B is when the sensing object is<br>removed and the sensitivity adjuster is<br>turned clockwise until the incident light<br>indicator (red LED) is ON. Position C is<br>where the adjuster is turned<br>counterclockwise (reducing the<br>sensitivity) from position B until the<br>incident light indicator (red LED) is OFF.<br>When there are no background objects,<br>the maximum sensitivityis position C.| |3) Setting|---|Min.<br>Max.<br>(C)<br>(A)|**ON**<br>ON→ **OFF**<br>Stability<br>indicator<br>(green)<br>Light<br>indicator<br>(red)|Set the sensitivity adjuster to halfway<br>between (A) and (C) (at the optimum<br>sensitivity). Check that the stability<br>indicator (green LED) turns ON<br>according to whether the sensing object<br>is there or not. There is not sufficient<br>margin if it does not turn ON. If this is the<br>case, reconsider the detection method.| Unlike conventional Photoelectric Sensors, the variation in the sensitivity of E3S-A Photoelectric Sensors is minimal. This means the sensitivity can be adjusted on only a single Photoelectric Sensor, and then the adjusters on the other Photoelectric Sensors can be set to the same scale position. There is no need to adjust the sensitivity of each Photoelectric Sensor individually. **9** **E3S-A** ## **Safety Precautions** ## **WARNING** **This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes.** ## **Precautions for Safe Use** 1. Do not use the product in environments subject to flammable or explosive gases. 2. Do not use the Sensor in environments where the cables may become immersed in oil or other liquids or where liquids may penetrate the Sensor. - Doing so may result in damage from burning and fire, particularly if the liquid is flammable. 3. When disposing of the product, treat it as industrial waste. ## **Precautions for Correct Use** ## **Mounting Bracket (Provided)** The direction of the optical axis coincides with the machine axis of the E3S-A when the mounting screw is inserted into the lock hole of the Mounting Bracket. If the mounting surface and the screw hole are correctly aligned toward the sensing object (or toward the Retroreflector for a Through-beam Sensor), the mechanical axis and optical axis will be aligned when the screw is inserted into the hole. Incident light will be detected, and time-consuming adjustment will not be necessary. (If, however, the mounting surface is not flat, adjustment of the optical axis may still be required.) Adjust the position of the Sensor so that incident light points at the center. Make sure that the incident light is at a fixed position. The maximum tightening torque of the screw is 0.53 N.m max. Do not use the product in atmospheres or environments that exceed product ratings. Do not use the Sensor in water, rainfall, or outdoors. ## **Mounting** ## **Position of Optical Axis of Through-beam Model** Unlike conventional through-beam sensors, the E3S-A Through-beam Photoelectric Sensor incorporates 2 lenses. The lens actually in use is the one marked with an arrow indicating the position of the optical axis. When using a Slit, attach it to the lens marked with the arrow. **==> picture [168 x 53] intentionally omitted <==** **----- Start of picture text -----**<br> Base of mounting<br>bracket<br>Optical axis<br>Bracket can move<br>Machine axis in this direction<br>Optical axis lock hole (M3)<br>**----- End of picture text -----**<br> ## ● **Adjustments** ## **E39-S46 Through-beam Slits** **==> picture [149 x 97] intentionally omitted <==** **----- Start of picture text -----**<br> Unused lens<br>Optical axis indicator arrow<br>Arrow indicating optical axis position<br>Lens actually in use (attach the Slit to this lens)<br>**----- End of picture text -----**<br> ## **Position of Arrow Indicating Optical Axis** **==> picture [178 x 69] intentionally omitted <==** **----- Start of picture text -----**<br> Model Position of lens in use<br>E3S-A<br>Top<br>(Vertical Sensors)<br>E3S-A<br>(Horizontal Bottom<br>Sensors)<br>**----- End of picture text -----**<br> (Accessory, order separately) Use the rubber attachment with the metal cover if a slit width of 2 mm is required. (A Slit is not required in this case.) Insert the 0.5- or 1-mm Slit between the metal cover and rubber attachment if a slit width of 0.5 or 1 mm is desired. These Slits fit into the rubber attachment. **==> picture [200 x 115] intentionally omitted <==** **----- Start of picture text -----**<br> 2 mm<br>Metal cover<br>Slit (0.5 mm or 1 mm)<br>Rubber attachment<br>13.6 mm<br>Arrow indicating<br>11.1 mm position of optical axis<br>Indented portions<br>E3S-A<br>**----- End of picture text -----**<br> ## **Tightening the Connector** Manually tighten the connector until the threads have completely disappeared. If tightening is insufficient, the degree of protection may not be maintained, or the connector may become loose when it is subjected to vibration. Using pliers to tighten the connector may damage it. **==> picture [17 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> Screw<br>**----- End of picture text -----**<br> Apply the Slit to the lens of the Photoelectric Sensor marked with an arrow indicating the position of the optical axis (apply it to the bottom lens of Horizontal Sensors and the top lens of Vertical Sensors). **==> picture [129 x 34] intentionally omitted <==** Use the E39-L60 Close Mounting Plate (provided) if the Sensor is mounted using mounting brackets or if it is mounted directly. (Refer to _Dimensions_ .) **10** **E3S-A** ## **E39-E6 Polarized Mutual Interference Prevention Filters for Through-beam Sensors** (Accessory, order separately) - A set of 4 Filters are sold together for two Through-beam Sensors (for 2 each for Emitters and Receivers). Order one for every two sets of Photoelectric Sensors. - For mounting, refer to the figure of the Through-beam Slits. **==> picture [235 x 128] intentionally omitted <==** **----- Start of picture text -----**<br> Emitter<br>Receiver<br>Up to two units<br>Y = 0 can be attached.<br>Note: The arrows on the Filters can be attached in<br>either direction when two Sensors are<br>mounted next to each other. The Filter<br>attached to an Emitter and to the<br>corresponding Receiver must be the same<br>in direction of polarization or the Sensor will<br>not function.<br>**----- End of picture text -----**<br> - The arrow printed on the cover indicates the direction of polarization. By attaching the Filters opposite to each other in polarization to the Emitters and the Receivers in rows, mutual interference can be prevented (in any case, the Filter attached to an Emitter and to the corresponding Receiver must be the same in direction of polarization or the Photoelectric Sensor will not function). ## **Operating Mode Selection** ## Turbo **Function (** Turbo **Switch)** The turbo function is effective with the turbo switch pressed, and the function is reset automatically when released. With the turbo function switched ON, the light spot is visible even at a distance of 200 mm, making it easy to check the sensing position and the angle of the optical axis. ## **Precautions** - (1)Do not keep the turbo switch pressed for longer than 3 minutes. (It will not break even if it is pressed for an extended period.) - (2)Pressing the switch may change the timer delay settings. Set the timer after using the turbo function to check the optical axis. - (3)To press the switch, use a force of 9.8 N max. **==> picture [136 x 126] intentionally omitted <==** **----- Start of picture text -----**<br> The intensity of the<br>red spot will be<br>increased, making<br>visual confirmation<br>much easier.<br>PUSH<br>Sensitivity adjuster<br>The OFF-delay timer adjuster is<br>used as a turbo switch (black).<br>**----- End of picture text -----**<br> As shown in the following illustration, the E3S-A has an operating mode selector on the panel where the Receiver connector is located. With this operating mode selector, the E3S-A is in either DarkON or Light-ON mode. **==> picture [153 x 108] intentionally omitted <==** **----- Start of picture text -----**<br> Operating mode switch (black)<br>Light ON<br>Dark ON (ON when light is ON)<br>(ON when light is OFF)<br>D L<br>**----- End of picture text -----**<br> The default operating mode is shown in the following table. **==> picture [169 x 59] intentionally omitted <==** **----- Start of picture text -----**<br> Default switch<br>Sensing method<br>setting<br>Through-beam Sensors<br>Dark-ON<br>Retro-reflective Sensors<br>Diffuse-reflective Sensors Light-ON<br>**----- End of picture text -----**<br> ## **and** Turbo **Switch** The Emitter of the Through-beam Sensor with the selfdiagnostic feature incorporates a turbo switch. When this switch is ON, the intensity of the red LED light source can be increased to make a brighter spot. ## **Using the E39-R5 Optical Axis Reflector for Throughbeam Sensors** (Accessory, order Separately) Use this attachment when the set distance is long and adjustment is mechanically difficult with a sensing object. **==> picture [189 x 93] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AT@@<br>Eye Receiver<br>E39-R5<br>Optical Axis Confirmation Reflector<br>E3S-AT@@<br>Emitter<br>**----- End of picture text -----**<br> - Attach the Reflector to the Receiver. - Look at the Reflector from right behind the Emitter. The Reflector should be bright with red light when the optical beam strikes the Reflector. If the Emitter has a turbo function, the Reflector looks brighter with the function switched ON. - When the Reflector is removed, the light beam strikes the Receiver. **11** **E3S-A** ## **Dimensions** (Unit: mm) Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet. ## **E3S-A Built-in Amplifier Photoelectric Sensor** **Through-beam Sensors (Horizontal) Pre-wired Sensors** **==> picture [511 x 601] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AT11/21/31/41 (Receiver) Sensitivity adjuster (white) 4-dia. vinyl-insulated round cable with<br>4 conductors<br>Timer adjuster (black) *1<br>(Conductor cross<br>With Mounting Bracket Attached Light indicator (red) 40 (4) Insulator diameter: section: 0.2 mm [2] ,<br>12.9 7 5.5 1.1 mm),<br>Optical Standard length: 2 m *2<br>axis<br>12.4 12 8.8 dia.<br>28.9 16.9<br>3.1 7.2 Stability indicator (green)<br>Emitter: E3S-AT@@-L *1. Not applicable to Sensors with timer adjusters (E3S-AT11 and E3S-AT31).<br>*2. The E3S-AT11 or E3S-AT31 has three conductors.<br>Receiver: E3S-AT@@-D<br>5<br>10.5 3020 7.2 Stainless steel(SUS304) Lens (7 × 7) Optical axis Operation mode<br>selector switch<br>Optical axis 1.3<br>21<br>8<br>29.2<br>5.5 10.5 20 Two, M3 × 12 screws<br>1.2 10.7 Mounting Holes<br>A* Two, M3 holes<br>Two, M3 × 12 screws<br>*The Mounting Bracket can be attached to side A.<br>20<br>E3S-AT11/31 (Emitter)<br>4-dia. vinyl-insulated<br>round cable with<br>With Mounting Bracket Attached Power indicator (red) 2 conductors (Conductor cross<br>Optical 40 (4) Insulator diameter: section: 0.2 mm [2] ,<br>axis 1 7.8 1.1 mm),<br>Standard length: 2 m<br>28.9 16.9 12.4 12 8.8 dia.<br>3.1 7.2<br>5 7.2 Stainless steel Lens (7 × 7) Optical axis<br>10.5 20 (SUS304)<br>Optical axis 30<br>1.3<br>21<br>8<br>5.529.2 10.5 20 Two, M3 × 12 screws<br>1.2 10.7<br>4-dia. vinyl-insulated round<br>A* Power indicator (red) Turbo switch cable with 3 conductors<br>*The Mounting Bracket can be attached to side A. Two, M3 × 12 screws 40 (4) (Conductor cross section: 0.2 mm [2] ,<br>1 2.9 12.5 Insulator diameter: 1.1 mm),<br>Standard length: 2 m<br>E3S-AT21/41(Emitter) 12.4 12 8.8 dia.<br>Optical 1 0.5 20<br>axis<br>Mounting Holes<br>28.9 16.9<br>Two, M3 holes<br>3.1 7.2<br>20<br>5<br>7.2<br>20<br>10.5<br>30<br>**----- End of picture text -----**<br> Note: Models numbers for Through-beam Sensors (E3S-AT@1) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT11-L 2M), the model number of the Receiver, by adding "-D" (example: E3S-AT11-D 2M). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **12** **E3S-A** ## **Sensors with Standard Connectors** **==> picture [511 x 482] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AT16/36 (Receiver)<br>Sensitivity adjuster (white)<br>With Mounting Bracket Attached Light indicator (red) M12 Connector<br>40 (10)<br>Optical 1 2.9 7<br>axis<br>12.4 12<br>28.9 16.9<br>3.1 7.2<br>Stability indicator (green)<br>5<br>10.5 20 7.2 Stainless steel Lens (7 × 7) Optical axis Operation modeselector switch<br>35.5 (SUS304)<br>Optical axis 1.3<br>21<br>8<br>29.2 10.5 20<br>5.5 Two, M3 × 12 screws<br>1.2 10.7 Mounting Holes<br>A* Two, M3<br>* The Mounting Bracket can be attached to side A. Two, M3 × 12 screws<br>20<br>E3S-AT16/36 (Emitter)<br>Power indicator (red) M12 Connector<br>40 (10)<br>With Mounting Bracket Attached 1 7.8<br>Optical<br>axis<br>12.4 12<br>28.9 16.9<br>3.1 7.2<br>Lens (7 × 7) Optical axis<br>5<br>7.2 Stainless<br>10.5 20 steel<br>1.3<br>35.5 (SUS304)<br>Optical axis 21<br>8<br>10.5 20<br>29.2 Two, M3 × 12 screws<br>5.5 Mounting Holes<br>1.2 10.7 Two, M3<br>A*<br>*The Mounting Bracket can be attached to side A. Two, M3 × 12 screws 20<br>**----- End of picture text -----**<br> Note: Models numbers for Through-beam Sensors (E3S-AT@6) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT16-L), the model number of the Receiver, by adding "-D" (example: E3S-AT16-D). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **13** **E3S-A** ## **Through-beam Sensors (Vertical) Pre-wired Sensors** **==> picture [511 x 632] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AT61/71/81/91 (Receiver) 4-dia. vinyl-insulated<br>round cable with<br>4 conductors<br>(Conductor cross<br>With Mounting Bracket Attached Optical axis Lens (7 × 7) 40 Optical axis (4) Insulator diameter: 1.1 mm),section: 0.2 mm [2] ,<br>8.3 Standard length: 2 m<br>1 3.5 *1<br>Optical<br>axis<br>12.4 12 8.8 dia.<br>Stainless<br>28.9 16.9 steel<br>(SUS304)<br>3.1 Stability indicator Light indicator (red)<br>(green) Sensitivity 1 .3<br>adjuster (white) Operation mode<br>5.5 5.4 20 7.2 3.6 Timer adjuster selector switch<br>20 7 (black) *2<br>47.2 21<br>5.5<br>1 0.5 20<br>Two, M3 × 12 screws<br>*1. The E3S-AT61 or E3S-AT81 has three conductors.<br>29.2 *2. Not applicable to timer adjuster models E3S-AT61 and E3S-AT81.<br>1.2 10.7 Mounting Holes<br>A* Two, M3 holes<br>1 0.5 20 Two, M3 x 12 screws<br>* The Mounting Bracket can be attached to side A. 20<br>E3S-AT61/81 (Emitter)<br>4-dia. vinyl-insulated<br>With Mounting Bracket Attached round cable<br>with 2 conductors<br>Optical axis8.3 Lens (7 × 7) Optical axis (4) (Conductor cross section: 0.2 mmInsulator diameter: [2] ,<br>Optical 40 1.1 mm),<br>axis 1 3.5 Standard length: 2 m *<br>Stainless<br>28.9 16.9 steel(SUS304) 12.4 12 8.8 dia.<br>3.1<br>5.5 5.4 20 7.2 Power indicator (red) 1 .3<br>20<br>47.2<br>8.5<br>21<br>29.2 1 0.5 20<br>Two, M3 × 12 screws<br>1.2 10.7<br>A*<br>1 0.5 20 Two, M3 × 12 screws<br>* The Mounting Bracket can be attached to side A.<br>E3S-AT71/91 (Emitter)<br>Power indicator (red)<br>3.6 Turbo switch<br>21 12.5<br>29.2<br>1.2 10.7 *The E3S-AT71 of E3S-AT91 Mounting Holes<br>A* has three conductors.<br>* The Mounting Bracket can be attached to side A. Two, M3 holes<br>20<br>**----- End of picture text -----**<br> Note: Models numbers for Through-beam Sensors (E3S-AT@1) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT61-L 2M), the model number of the Receiver, by adding "-D" (example: E3S-AT61-D 2M). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **14** **E3S-A** ## **Connector Sensors** **==> picture [511 x 517] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AT66/86 (Receiver)<br>With Mounting Bracket Attached<br>Optical axis M12<br>8.3 Lens (7 × 7) Optical axis Connector<br>Optical 40 (10)<br>axis 1 3.5<br>Use these<br>two holes<br>for<br>31.4 19.4 mounting. 12<br>3.1<br>Stability<br>Stainless steel(SUS304) 20 7.2 5.4 indicator(green) LIght indicator (red)Sensitivity 1 .3 Operationmodeselector<br>41.7 3.6 adjuster(white) switch<br>7<br>21<br>29.2<br>1 0.5 20<br>Two, M3 × 12 screws<br>1.2 10.7<br>A* Mounting Holes<br>E39-L60 Close Mounting Plate (provided) 1 0.5 20 Two, M3 × 12 screws Two, M3 holes<br>(Attach the mounting plate or the<br>plug cannot be connected.)<br>* The Mounting Bracket can be attached to side A. 20<br>E3S-AT66/86 (Emitter)<br>With Mounting Bracket Attached<br>Optical axis Lens (7 × 7) Optical axis M12 Connector<br>8.3 40 (10)<br>1 3.5<br>Optical<br>axis<br>Use these<br>two holes 12<br>for<br>31.4 19.4<br>mounting.<br>3.1<br>Power indicator (red) 1 .3<br>Stainless steel 20 5.4 8.5<br>(SUS304) 7.2<br>41.7 21<br>1 0.5 20<br>Two, M3 × 12 screws<br>29.2<br>Mounting Holes<br>1.2 10.7 Two, M3 holes<br>A*<br>E39-L60 Close Mounting Plate (provided) 1 0.5 20 Two, M3 × 12 screws 20<br>(Attach the mounting plate or the<br>plug cannot be connected.)<br>* The Mounting Bracket can be attached to side A.<br>**----- End of picture text -----**<br> Note: Models numbers for Through-beam Sensors (E3S-AT@6) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-AT66-L), the model number of the Receiver, by adding "-D" (example: E3S-AT66-D). Refer to _Ordering Information_ to confirm model numbers for Emitter and Receivers. **15** **E3S-A** ## **Retro-reflective Sensors (Horizontal) Pre-wired Sensors** **==> picture [511 x 278] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AR11/21/31/41<br>Sensitivity adjuster (white)<br>Timer adjuster/<br>Turbo switch (black) *1<br>Turn to adjust the timer:<br>Light indicator (red) push to switch turbo function<br>With Mounting Bracket Attached (4) *2<br>Optical 1 5.2 42.37 5.5 4-dia. vinyl-insulated round cable<br>axis 2 .3 with 5 conductors<br>(Conductor cross<br>28.9 16.9 section: 0.2 mmInsulator diameter: [2] ,<br>12.4 12 8.8 dia. 1.1 mm),<br>3.1 7.2 Standard length: 2 m *3<br>Stability indicator (green)<br>5<br>7.2 Stainless *1. For E3S-AR21 and E3S-AR41 only.<br>10.5 20 steel *2. 9.7 mm for E3S-AR21 and E3S-AR41.<br>30 (SUS304) *3. The E3S-AR11 or E3S-AR31 has three conductors.<br>Receiver<br>Lens (7 × 14)<br>Optica l Operation mode<br>axis selector switch<br>Optical axis 1.3<br>9 29.2 21<br>11.5<br>1.2 10.7<br>A* Emitter 12.8 20 Two, M3 × 12 screws<br>Two, M3 × 12 screws<br>*The Mounting Bracket can be attached to side A. Mounting Holes<br>Two, M3 holes<br>20<br>**----- End of picture text -----**<br> ## **Sensors with Connectors** **==> picture [511 x 244] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AR16/36<br>Light indicator (red) Sensitivity adjuster (white)<br>42.3 (10) Connector M12<br>With Mounting Bracket Attached 1 5.2 7<br>2 .3<br>Optical<br>axis<br>12.4 12<br>28.9 16.9<br>3.1 7.2 Stability indicator (green)<br>Receiver<br>5.5 5 20 7.2 Stainless steel Lens (7 × 14) Optical axis Operation mode<br>30 (SUS304) 1.3 selector switch<br>21<br>11.5<br>Optical axis<br>12.8 20<br>9 29.2 Emitter Two, M3 × 12 screws<br>1.2 10.7 Mounting Holes<br>A* Two, M3 holes<br>*The Mounting Bracket can be attached to side A. Two, M3 × 12 screws<br>20<br>**----- End of picture text -----**<br> **16** **E3S-A** ## **Retro-reflective Sensors (Vertical) Pre-wired Sensors E3S-AR61/71/81/91** **==> picture [511 x 287] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AR61/71/81/91<br>4-dia. vinyl-insulated<br>round cable<br>with 5 conductors<br>(Conductor cross<br>With Mounting Bracket Attached Receiver Optical axis section: 0.2 mm [2] ,<br>Lens (5.7 × 10.9) Emitter (4) *2 Insulator diameter:<br>Optical axis4.8 1 7 40 1.1 mm),Standard length: 2 m *3<br>Optical<br>axis<br>12.4 12 8.8 dia.<br>Stainless<br>28.9 16.9 steel<br>(SUS304)<br>3.1 Light indicator<br>Stability indicator (green) (red) 1 .3<br>Sensitivity Operation mode<br>5.5 5.4 20 20 7.2 5.9 adjuster (white) selector switch<br>47.2 7<br>23.3<br>5.5<br>Timer adjuster/ 1 0.5 20<br>Turbo switch (black) *1 Two, M3 × 12 screws<br>31.5 Turn to adjust the timer:<br>push to switch turbo function *1. Available on E3S-AR71 and E3S-AR91 only.<br>*2. 9.7 mm for E3S-AR71 and E3S-AR91.<br>1.2 10.7 *3. The E3S-AR611 or E3S-AR81 has three conductors.<br>A*<br>1 0.5 20 Two, M3 × 12 screws Mounting Holes<br>* The Mounting Bracket can be attached to side A. Two, M3 holes<br>20<br>**----- End of picture text -----**<br> ## **Sensors with Connectors** **==> picture [508 x 264] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AR66/86<br>With Mounting Bracket Attached Lens (5.7 Receiver× 10.9) Optical axisEmitter M12 Connector<br>Optical axis<br>4.8 40 (10 )<br>1 7<br>Optical<br>axis<br>Use these 12<br>two holes<br>31.4 19.4 for<br>mounting.<br>3.1<br>Stability indicator Light indicator (red)<br>(green) 1 .3<br>Stainless steel(SUS304) 20 7.2 5.4 Four mounting holes 5.9 Sensitivity adjuster (white) Operation modeselector switch<br>41.7 7<br>23.3<br>1 0.5 20<br>31.5 Two,<br>M3 × 12 screws<br>Mounting Holes<br>A* 1.2 10.7 Two, M3 holes<br>E39-L60 Close Mounting Plate (provided) 1 0.5 20 Two, M3 × 12 screws<br>(Attach the mounting plate or the 20<br>plug cannot be connected.)<br>* The Mounting Bracket can be attached to side A.<br>**----- End of picture text -----**<br> **17** **E3S-A** ## **Diffuse-reflective Sensors (Horizontal) Pre-wired Sensors** **==> picture [511 x 287] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AD11/12/13/21/22/23 Sensitivity adjuster (white)<br>-AD31/32/33/41/42/43 Timer adjuster/<br>Turbo switch (black) *1<br>Turn to adjust the timer:<br>push to switch turbo function<br>4-dia. vinyl-insulated<br>Light indicator (red) round cable<br>With Mounting Bracket Attached 405.5 (4) with 4 conductors (Conductor cross section: 0.2 mm [2] ,<br>1 2.9 7 Insulator diameter: 1.1 mm),<br>Optical Standard length: 2 m *2<br>axis<br>12.4 12 8 .8 dia.<br>28.9 16.9<br>Stability indicator (green)<br>3.1 7.2 *1. Timer adjuster: Not available on E3S-AD11, E3S-AD12, E3S-AD13, E3S-AD31,<br> E3S-AD32 and E3S-AD33.<br> Turbo switch: Available on E3S-AD21 and E3S-AD41 only.<br>5 7.2 Stainless *2. The E3S-AD11, E3S-AD12, E3S-AD13, E3S-AD31, E3S-AD32, or E3S-AD33 has three conductors.<br>10.5 20 steel<br>30 (SUS304) Lens (7 × 14) Receiver<br>Opticaaxis l Operation mode<br>selector switch<br>1.3<br>21<br>Optical axis 11.5<br>9 29.2<br>10.5 20<br>1.2 10.7 Emitter Two, M3 × 12 screws<br>A* Mounting Holes<br>* The Mounting Bracket can be attached to side A. Two, M3 × 12 screws Two, M3 holes<br>20<br>**----- End of picture text -----**<br> ## **Sensors with Connectors** ## **E3S-AD16/17/18/36/37/38** **==> picture [230 x 191] intentionally omitted <==** **----- Start of picture text -----**<br> With Mounting Bracket Attached<br>Optical<br>axis<br>28.9 16.9<br>3.1 7.2<br>5.5 5<br>7.2 Stainless<br>20 steel<br>30 (SUS304)<br>Optical axis<br>9 29.2<br>1.2 10.7<br>A*<br>* The Mounting Bracket can be attached to side A. Two, M3 × 12 screws<br>**----- End of picture text -----**<br> **==> picture [226 x 211] intentionally omitted <==** **----- Start of picture text -----**<br> Sensitivity adjuster (white)<br>Light indicator (red) M12 Connector<br>40 (10)<br>1 2.9 7<br>12.4 12<br>Stability indicator (green)<br>Lens (7 × 14) Receiver<br>Optical Operation mode<br>axis selector switch<br>1.3<br>21<br>11.5<br>10.5 20<br>Emitter Two, M3 × 12 screws<br>Mounting Holes<br>Two, M3 holes<br>20<br>**----- End of picture text -----**<br> **18** **E3S-A** ## **Diffuse-reflective Sensors (Vertical) Pre-wired Sensors** **==> picture [511 x 301] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AD61/62/63/71/72/73<br>-AD81/82/83/91/92/93 4-dia. vinyl-insulated round cable<br>with 4 conductors<br>Lens (7 Receiver× 14) 40 Optical axisEmitter (4) (Conductor cross section: 0.2 mmInsulator diameter: 1.1 mm), [2] ,<br>With Mounting Bracket Attached 1 7 Standard length: 2 m *1<br>Optical axis<br>4.8<br>12.4 12 8.8 dia.<br>Optical<br>axis<br>Stainless<br>28.9 16.9 steel(SUS304) Stability indicator(green) Light indicator (red)Sensitivity 1 .3<br>3.1 3.6 adjuster Operation mode<br>(white) selector<br>7<br>20 21 5.5<br>20 7.2<br>5.5 5.4<br>47.2<br>Timer adjuster/ 1 0.5 20<br>Turbo switch (black) *2 Two, M3 × 12 screws<br>Turn to adjust the timer:<br>push to switch turbo function<br>*1. E3S-AD61, E3S-AD62, E3S-AD63, E3S-AD81, E3S-AD82, and E3S-AD83 have<br> three conductors.<br>29.2 *2. Timer adjuster: Not available on E3S-AD61, E3S-AD62, E3S-AD63, E3S-AD81,<br> E3S-AD82 and E3S-AD83.<br>1.2 10.7 Turbo switch: Available on E3S-AD71 and E3S-AD91 only.<br>A*<br>Mounting Holes<br>1 0.5 20 Two, M3 × 12 screws<br>* The Mounting Bracket can be attached to side A. Two, M3 holes<br>20<br>**----- End of picture text -----**<br> ## **Sensors with Connectors E3S-AD66/67/68/86/87/88** **==> picture [511 x 301] intentionally omitted <==** **----- Start of picture text -----**<br> E3S-AD66/67/68/86/87/88<br>With Mounting Bracket Attached<br>Receiver Optical axis Connector<br>Optical axis Lens (7 × 14) Emitter M12<br>4.8<br>40 (10)<br>Optical 17<br>axis<br>Use these<br>two holes 12<br>31.4 19.4 for<br>mounting.<br>3.1 Stability indicator Light indicator (red)<br>(green) Sensitivity 1 .3 Operation<br>Stainless steel(SUS304) 20 7.2 5.4 3.6 adjuster (white) modeselector switch<br>7<br>41.7<br>21<br>1 0.5 20<br>Two, M3 × 12 screws<br>29.2 Mounting Holes<br>1.2 10.7 Two, M3 holes<br>A*<br>E39-L60 Close Mounting Plate (provided) 1 0.5 20 Two, M3 × 12 screws 20<br>(Attach the mounting plate or the<br>plug cannot be connected.)<br>* The Mounting Bracket can be attached to side A.<br>**----- End of picture text -----**<br> **19** **E3S-A** ## **Accessories (Order Separately)** **Insert-type Long Slit (For Through-beam Model) E39-S46** **==> picture [207 x 93] intentionally omitted <==** **----- Start of picture text -----**<br> 6.8<br>11.6<br>A<br>2.1<br>9.7<br>21.4 [13.6]<br>A<br>A<br>**----- End of picture text -----**<br> |**Name**|**Dimensions A**|**Material**|**Quantity**| |---|---|---|---| |Supporter|2 mm|Stainless steel<br>(SUS304)|One each for Emitter and<br>Receiver (total of 2)| |Slits|0.5 mm|PVC|One each for Emitter and<br>Receiver (total of 4)| ||1 mm||| **Optical Axis Confirmation Reflector (For Through-beam Model) E39-R5** **==> picture [250 x 195] intentionally omitted <==** **----- Start of picture text -----**<br> 15.9<br>Bracket to be attachedto the Emitter panel of 9.7 11.7<br>E3S-A<br>11.6<br>7.9<br>59.9 25 11.2<br>Material:<br> Reflector: Acryl<br> Back: ABS<br>40.9<br>7.5<br>**----- End of picture text -----**<br> **Filters for Mutual Interference Prevention (For Through-beam Model) E39-E6** **==> picture [203 x 103] intentionally omitted <==** **----- Start of picture text -----**<br> 11.6 6.8<br>21.4<br>*<br>Material: Stainless steel (SUS304) 2.1<br>*Two of each for the Emitter and<br>Receiver (total of four)<br>**----- End of picture text -----**<br> ## **Reflectors** Refer to E39-R on your OMRON website for details. **Mounting Brackets** Refer to E39-L on your OMRON website for details. **In the interest of product improvement, specifications are subject to change without notice.** **20** ## Terms and Conditions Agreement ## Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. ## Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. ## Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. ## Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. ## Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. ## Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. ## Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. ## Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. **In the interest of product improvement, specifications are subject to change without notice.** ## **OMRON Corporation** ## **Industrial Automation Company** 2017.7 **http://www.ia.omron.com/** (c)Copyright OMRON Corporation 2017 All Right Reserved.
Updated at April 27, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →