E3AS-L200MD 2M

## **Distance-settable Photoelectric Sensor E3AS-L Series** 

## **Background suppression sensor for enhanced detection low-reflectivity objects** 

- Equipped with Omron's proprietary light emitting element for stable detection of low-reflective workpieces 

- Teaching method allows anyone to set optimal threshold values 

- Manufactured using Omron's proprietary laser sealing method (IP67/IP69K/IP67G *) 

- Antifouling coating prevents contamination on the sensing surface 

- IO-Link reduced time required for startups and changeovers 

- * Only for sensor units. 

Refer to _Safety Precautions_ on page 8. ~~a~~ 

For the most recent information on models that have been certified for safety standards, refer to your Omron website. 

## **Ordering Information** 

**Sensors [Refer to** _**Dimensions**_ **on page 9.]** 

|**Connection**<br>**method**|**Sensing distance**<br>**(white paper)**<br>**Output**<br>**IO-Link baud rate**<br>~~SS~~|**Sensing distance**<br>**(white paper)**<br>**Output**<br>**IO-Link baud rate**<br>~~SS~~|**Model**<br>~~SS~~|**Model**<br>~~SS~~|**Model**<br>~~SS~~|
|---|---|---|---|---|---|
|||**Output**<br>~~SS~~|**NPN output**<br>~~SS~~|**PNP output**<br>~~SS~~|**PNP output**|
|||**IO-Link baud rate**<br>~~SS~~|**---**<br>~~SS~~|**COM2 (38.4 kbps)**<br>~~SS~~|**COM3 (230.4 kbps)**|
|Pre-wired (2 m) 1|10 mm<br>200 mm||**E3AS-L200MN 2M**<br>**E3AS-L200MD 2M**<br>~~er~~|**E3AS-L200MD 2M**<br>~~er~~|**E3AS-L200MT 2M**|
|M8 Connector|||**E3AS-L200MN M3**<br>**E3AS-L200MD M3**<br>~~er~~|**E3AS-L200MD M3**<br>~~er~~|**E3AS-L200MT M3**|
|M8 Pre-wired<br>Connector|||**E3AS-L200MN-M3J 0.3M**<br>**E3AS-L200MD-M3J 0.3M**|**E3AS-L200MD-M3J 0.3M**|**E3AS-L200MT-M3J 0.3M**|
|M12 Pre-wired<br>Connector2|||**E3AS-L200MN-M1TJ 0.3M**<br>**E3AS-L200MD-M1TJ 0.3M**<br>ee|**E3AS-L200MD-M1TJ 0.3M**<br>ee|**E3AS-L200MT-M1TJ 0.3M**|
|Pre-wired (2 m)1|80 mm<br>10 mm||**E3AS-L80MN 2M**<br>**E3AS-L80MD 2M**<br>ee<br>ee|**E3AS-L80MD 2M**<br>ee<br>ee|**E3AS-L80MT 2M**|
|M8 Connector|||**E3AS-L80MN M3**<br>**E3AS-L80MD M3**<br>ee|**E3AS-L80MD M3**<br>ee|**E3AS-L80MT M3**|
|M8 Pre-wired<br>Connector|||**E3AS-L80MN-M3J 0.3M**<br>**E3AS-L80MD-M3J 0.3M**|**E3AS-L80MD-M3J 0.3M**|**E3AS-L80MT-M3J 0.3M**|
|M12 Pre-wired<br>Connector2|||**E3AS-L80MN-M1TJ 0.3M**<br>**E3AS-L80MD-M1TJ 0.3M**<br>ee|**E3AS-L80MD-M1TJ 0.3M**<br>ee|**E3AS-L80MT-M1TJ 0.3M**|



1. Models with 5-m cable length are also available with “5M” suffix. (Example: E3AS-L200MN 5M) 

2. The Pre-wired Connector (M12) is Smartclick Connector. 

**1** 

**E3AS-L Series** 

## **Accessories (Sold Separately)** 

**Sensor I/O Connectors (Sockets on One Cable End) (Models for Connectors / Pre-wired Connectors) A Sensor I/O Connector is not provided with the Sensor. Order separately as needed.** 

|**Round Water-resistant Connectors XS3F-M8 series**|
|---|
|**Note: 1.** The XS3W (Socket and Plug on Cable Ends) is also available. Refer to_XS3W-M8/XS3F-M8 Series Datasheet_(Cat. No. G140).<br>**2.** The connectors will not rotate after they are connected.<br>**Appearance**<br>**Cable**<br>**specification**<br>**Cable diameter**<br>**(mm)**<br>**No. of**<br>**cable cores**<br>**(Poles)**<br>**Cable**<br>**connection**<br>**direction**<br>**Cable length (m)**<br>**Sensor I/O Connector**<br>**model number**<br>M8 Connector<br>Straight type<br>Right-angle type<br>PVC cable<br>5 dia.<br>4<br>Straight<br>2<br>**XS3F-M8PVC4S2M**<br>5<br>**XS3F-M8PVC4S5M**<br>Right-angle<br>2<br>**XS3F-M8PVC4A2M**<br>5<br>**XS3F-M8PVC4A5M**<br>2] [| HEE|
|**3.** The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.|
|**Round Water-resistant Connectors XS5 series**|
|**Note: 1.** The XS5W (Socket and Plug on Cable Ends) is also available. Refer to_XS5_on your Omron website for details.<br>**2.** The connectors will not rotate after they are connected.<br>**Appearance**<br>**Cable specification**<br>**Cable diameter**<br>**(mm)**<br>**Cable connection**<br>**direction**<br>**Cable length (m)**<br>**Sensor I/O Connector**<br>**model number**<br>M12 Smartclick Connector<br>Straight type<br>Right-angle type<br>PVC robot cable<br>6 dia.<br>Straight<br>2<br>**XS5F-D421-D80-F**<br>5<br>**XS5F-D421-G80-F**<br>Right-angle<br>2<br>**XS5F-D422-D80-F**<br>5<br>**XS5F-D422-G80-F**<br><| | HEE|
|**3.** The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.|



**2** 

**E3AS-L Series** 

**Mounting Brackets [Refer to** _**Dimensions**_ **on page 10.] A Mounting Bracket is not enclosed with the Sensor. Order separately as needed.** 

|**Appearance**|**Model**<br>**(material)**<br>ey|**Applicable Sensor E3AS series**<br>es<br>es|**Applicable Sensor E3AS series**<br>es<br>es|**Applicable Sensor E3AS series**<br>es<br>es|**Applicable Sensor E3AS series**<br>es<br>es|
|---|---|---|---|---|---|
|||**Pre-wired**<br>es|**M8 Pre-wired**<br>**Connector**<br>es|**M12 Pre-wired**<br>**Smartclick Connector**|**M8 Connector**|
|**L-shaped**<br>**Mounting**<br>**Bracket**|**E39-L201**<br>**(SUS304)**<br>ey|Yes<br>es|Yes<br>es|Yes|---|
|**Horizontal**<br>**Protective**<br>**Cover**<br>**Bracket**|**E39-L202**<br>**(SUS304)**|Yes|Yes|Yes|---|
|**Rear**<br>**Mounting**<br>**Bracket**<br>']<br>‘a<br>:|**E39-L203**<br>**(SUS304)**|Yes|Yes|Yes|Yes 2|
|**Robust**<br>**Mounting**<br>**Bracket**|**E39-L204**<br>**(SUS304)**|Yes|Yes|Yes|---|
|**L-shaped**<br>**Mounting**<br>**Bracket**|**E39-L211**<br>**(SUS304)**|--- 1|--- 1|--- 1|Yes 3|
|**Horizontal**<br>**Protective**<br>**Cover**<br>**Bracket**|**E39-L212**<br>**(SUS304)**|--- 1|--- 1|--- 1|Yes 3|
|**Robust**<br>**Mounting**<br>**Bracket**|**E39-L214**<br>**(SUS304)**|--- 1|--- 1|--- 1|Yes 3|



1. Can be used for Pre-wired models, M8 Pre-wired Connector models, and M12 Pre-wired Smartclick Connector models. However, confirm the bracket shape in advance. 

2. Confirm the installation environment and bracket shape of the Sensor I/O Connector to be connected. 

3. Use an L-shaped Sensor I/O Connector. Straight types cannot be installed. 

**3** 

**E3AS-L Series** 

## **Ratings and Specifications** 

|||**Sensing method**|**Distance-settable**|**Distance-settable**|
|---|---|---|---|---|
|**Item**<br>**Model**||**NPN output**|**E3AS-L200MN**|**E3AS-L80MN**|
|||**PNP output/ COM2**|**E3AS-L200MD**|**E3AS-L80MD**|
|||**PNP output/ COM3**|**E3AS-L200MT**|**E3AS-L80MT**|
|**Sensing distance**|||10 mm to the set distance (White paper or black paper 100 × 100 mm)||
|**Setting range**|||40 to 200 mm<br>(White paper or black paper 100 × 100 mm)|20 to 80 mm<br>(White paper or black paper 100 × 100 mm)|
|**Spot diameter (reference value)**|||25 × 25 mm at distance of 200 mm|4 mm dia. (at distance of 80 mm)|
|**Differential travel**|||10% max. of set distance|White paper: 2% max. of set distance<br>Black paper: 5% max. of set distance|
|**Reflectivity characteristic**<br>**(black/white error)**|||10% max. of set distance|5% max. of set distance|
|**Light source (wavelength)**|||Red LED (624 nm)|Red LED (650 nm)|
|**Power supply voltage**|||10 to 30 VDC (including 10% ripple (p-p)), Class2||
|**Current consumption**|||35 mA max.||
|**Input/output**|**Control output**||Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max.<br>(Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.)<br>Open-collector output (NPN/PNP output depending on model)||
|||**NPN**|OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)||
|||**PNP/COM2**<br>**PNP/COM3**|OUTPUT 1: NO (Normally open)/COM□, OUTPUT 2: NC (Normally closed)||
|**Protection circuits**|||Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection||
|**Response time**|||Operate or reset: 1 ms max.||
|**Distance setting**|||Teaching method/IO-Link communications||
|**Ambient illumination (Receiver side)**|||Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.||
|**Ambient temperature range**|||Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)||
|**Ambient humidity range**|||Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)||
|**Insulation resistance**|||20 Mmin. at 500 VDC||
|**Dielectric strength**|||1,000 VAC, 50/60 Hz for 1 min||
|**Vibration resistance**|||10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions||
|**Shock resistance**|||500 m/s2for 3 times each in X, Y, and Z directions||
|**Degree of protection**|||IP67 (IEC60529) and IP67G1(JIS C 0920 Annex 1), IP69K (ISO20653)||
|**Indicators**|||Operation indicator (orange), Stability & Communication indicator (green2)||
|**Connection method**|||Pre-wired (standard cable length: 2 m), M8 Connector, M8 Pre-wired Connector (standard cable length: 0.3m),<br>M12 Pre-wired Smartclick Connector (standard cable length: 0.3m)||
|**Weight**<br>**(packed state/**<br>**Sensor only)**|**Pre-wired (2 m)**||Approx. 135 g/approx. 90 g||
||**M8 Connector**||Approx. 75 g/approx. 30 g||
||**M8 Pre-wired Connector**<br>**(0.3 m)**||Approx. 85 g/approx. 40 g||
||**M12 Pre-wired**<br>**Smartclick Connector (0.3m)**||Approx. 95 g/approx. 50 g||
|**Materials**|**Case**||Stainless steel (SUS316L)||
||**Lens**||Methacrylate resin (PMMA)||
||**Display**||Polyamide 11 (PA11)||
|**Main IO-Link functions**|||Operation mode switching between NO and NC, execution of teaching (2-point teaching, Background teaching),<br>setup of the threshold, timer function of the control output and timer time selecting, Restore Factory Settings, Key<br>Lock (Unlock, Lock, Lock (No Button))||
|**IO-Link**<br>**Communication**<br>**specifications**|**IO-Link specification**||Ver. 1.1||
||<br>**Baud rate**||COM2 (38.4 kbps), COM3 (230.4 kbps)||
||<br>**Data length**||PD size: 1 byte, OD size: 1 byte (M-sequence type: TYPE_2_1)||
||**Minimum cycle time**||COM2: 3.5 ms, COM3: 1.2 ms||
|**Accessories**|||Instruction manual, compliance sheet and index list (attached for IO-Link type only),<br>Note: Mounting Brackets must be ordered separately.||



1. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil. 

2. IO-Link Communication mode: blinking 

**4** 

**E3AS-L Series** 

## **Engineering Data (Reference Value)** 

**==> picture [512 x 715] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operating Range<br>E3AS-L200 E3AS-L80<br>15 2<br>Set distance: 200 mm<br>Y Sensing object: White paper,<br>100 x 100 mm 1.5<br>10 X<br>1<br>5<br>0.5<br>Y<br>X<br>0 0<br>Set distance: 80 mm<br>-0.5 Sensing object: White paper,100 x 100 mm<br>-5<br>-1<br>-10<br>-1.5<br>-15 -2<br>0 50 100 150 200 250 0 10 20 30 40 50 60 70 80 90<br>Distance X (mm) Distance X (mm)<br>Spot Diameter vs. Sensing Distance<br>E3AS-L200 E3AS-L80<br>35 6<br>30<br>5<br>25<br>4<br>20<br>3<br>15<br>2<br>10<br>1<br>5<br>0 50 100 150 200 250 300 350 0 20 40 60 80 100 120<br>Distance X (mm) Distance X (mm)<br>Close-range Characteristics<br>E3AS-L200 E3AS-L80<br>200 80<br>Set distance: 200 mm Set distance: 80 mm<br>180<br>160 182mm 182mm 70 mm71 mm70<br>60<br>140<br>50<br>120<br>100 40<br>80<br>30<br>60 Set distance: 40 mm Set distance: 20 mm<br>35 mm 35 mm 20 15.5 mm 15.5 mm<br>40<br>10<br>20<br>0 0 mm 2 mm 0 mm 1 mm 0 1.5 mm 4 mm 1 mm 4 mm<br>White paper Black paper White paper Black paper White paper Black paper White paper Black paper<br>Material Material<br>Differential distance for each sensing object Vs. Distance<br>E3AS-L200 E3AS-L80<br>10 5<br>Reflectance of sensing object/ Reflectance of background Reflectance of sensing object/ Reflectance of background<br>1. 10% (Black paper)/ 90% (White paper) 1. 10% (Black paper)/ 90% (White paper)<br>2. 18% (Gray paper)/ 90% (White paper) 2. 18% (Gray paper)/ 90% (White paper)<br>3. 90% (White paper)/ 90% (White paper) 3. 90% (White paper)/ 90% (White paper)<br>8 4<br>6 3<br>2<br>2<br>1<br>4 2<br>3<br>1<br>2 1<br>3<br>0 50 100 150 200 250 0 20 40 60 80 100<br>Set distance (mm) Set distance (mm)<br>Operating Range Y (mm) Operating Range Y (mm)<br>Spot diameter (mm) Spot diameter (mm)<br>Sensing distance (mm) Sensing distance (mm)<br>Differential distance (%) Differential distance (%)<br>**----- End of picture text -----**<br>


**5** 

**E3AS-L Series** 

## **Sensing Object Angle Characteristics** 

**==> picture [511 x 591] intentionally omitted <==**

**----- Start of picture text -----**<br>
E3AS-L200<br>Vertical Horizontal<br>5 5<br>White paper Set distance: 200 mmSensing object: White paper/ White paper Set distance: 200 mmSensing object: White paper/<br>Black paper 100×100 mm Black paper 100×100 mm<br>0 0<br>-5 Black paper -5 Black paper<br>Horizontal<br>-10 Vertical -10 Inclination<br>Inclination<br>         Angle<br>Angle<br>-15 +θ -15 +θ<br>-θ<br>-θ<br>-20 Sensing objectCenter line - [20] Sensing objectCenter line<br>-50 -40 -30 -20 -10 0 10 20 30 40 50 -50 -40 -30 -20 -10 0 10 20 30 40 50<br>Angle θ (°) Angle θ (°)<br>E3AS-L80<br>Vertical Horizontal<br>10 Set distance: 80 mmSensing object: White paper/ 5 White paper Set distance: 80 mmSensing object: White paper/<br>White paper Black paper 100×100 mm Black paper 100×100 mm<br>5<br>0<br>Black paper<br>0<br>-5 Black paper<br>-5<br>Horizontal<br>Vertical -10 Inclination<br>-10 Inclination Angle<br>Angle +θ<br>-15 +θ -15 -θ<br>-θ Sensing object<br>Sensing object Center line<br>- [20] Center line -20<br>-50 -40 -30 -20 -10 0 10 20 30 40 50 -50 -40 -30 -20 -10 0 10 20 30 40 50<br>Angle θ (°) Angle θ (°)<br>Sensing Distance vs. Sensing Object Material<br>E3AS-L200 E3AS-L80<br>(Set Distance of 200 mm using White Paper) (Set Distance of 80 mm using White Paper)<br>200 80<br>180 70<br>160<br>60<br>140<br>50<br>120<br>100 40<br>80<br>30<br>60<br>20<br>40<br>10<br>20<br>0 0<br>Material Material<br>Change in sensing distance (%) Change in sensing distance (%)<br>Change in sensing distance (%) Change in sensing distance (%)<br>Sensing distance (mm) Sensing distance (mm)<br>White paper Veneer Cardboard Black paper Black rubber SUS Mirror White paper Veneer Cardboard Black paper Black rubber SUS Mirror<br>**----- End of picture text -----**<br>


**6** 

**E3AS-L Series** 

## **I/O Circuit Diagrams/ Timing Charts** 

## **NPN Output** 

**==> picture [484 x 266] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model C Timing chart n Output circuit<br>Brown<br>+V<br>Black Load 100mA  Load 100mA<br>- OUT1 n n max. oy max.<br>White<br>Threshold OUT2<br>Blue 10 to 30 VDC<br>Stable NEAR Stable FAR 0V<br>Stability&Communication  ON<br>E3AS-L□N indicator (green) 1 OFF Connector Pin Arrangement<br>Operation indicator (orange) OFFON M12 Pre-wiredSmartclick Connector  M8 Connector, M8 Pre-wired Connector<br>Control output 1 ON<br>OFF<br>Control output 2 2 ON<br>OFF<br>== | | ==®<br>Turns off when there is insufficient margin for incident light. In that case, place the workpiece closer to ensure sufficient receiving light intensity.<br>The initial value of control output 2 is reverse of control output 1.<br>PNP Output<br>Output circuit<br>Model<br>Ee Standard I/O mode (SIO mode)  [1] IO-Link Communication mode (COM mode)  [2]<br>+V Brown +V Brown +V<br>OUT1 t® Black 10 to 30 VDC C/Q a Black | C/Q<br>OUT20V a WhiteBlue Load 100mA max. Load 100mA max. DO0V > WhitBluee (4) DI/DO0V IO-Link Master Unit<br>E3AS-L□D<br>E3AS-L□T Connector Pin Arrangement Connector Pin Arrangement<br>M12 Pre-wired M8 Connector,  M12 Pre-wired M8 Connector,<br>Smartclick Connector  M8 Pre-wired Connector Smartclick Connector  M8 Pre-wired Connector<br>**----- End of picture text -----**<br>


1. Turns off when there is insufficient margin for incident light. In that case, place the workpiece closer to ensure sufficient receiving light intensity. 

2. The initial value of control output 2 is reverse of control output 1. 

## **PNP Output** 

1. Standard I/O mode is used as PNP ON/OFF output. 

2. IO-Link Communication mode is used for communications with the IO-Link Master. C/Q performs IO-Link communications. Sensor output DO performs ON/OFF output. 

**==> picture [500 x 183] intentionally omitted <==**

**----- Start of picture text -----**<br>
Timing charts<br>1. Turns off when there is insufficient margin for incident light. In<br>that case, place the workpiece closer to ensure sufficient<br>Output mode<br>Threshold receiving light intensity.<br>2. The initial value of control output 2 is reverse of control output 1.<br>Stable NEAR Stable FAR 3. The timer function of the control output 2 can be set up by the<br>IO-Link communications. (It is able to select ON delay, OFF<br>Stability&Communication  ON<br>indicator (green) 1 OFF delay, or one-shot function and select a timer time of 1 to 9,999<br>Standard I/O mode  Operation indicator (orange) OFFON ms (T).)<br>(SIO mode) Control output 1 3 ON<br>OFF ON delay OFF delay One Shot<br>Control output 2 2 ON<br>OFF Sensingobject PresentNot Sensingobject PresentNot Sensingobject PresentNot<br>IO-Link  Stability&Communication indicator (green) Flashing(1 second cycle)ON NONC ONOFFONpresent101 T T NONC ONOFFONpresent101 T T NONC ONOFFONpresent101 T T<br>Communication  Operation indicator (orange) OFF OFF 0 OFF 0 OFF 0<br>mode (COM mode) Communication output ON10 Please contact your Omron sales representative regarding the IO-Link setup file (IODD file).<br>Control output 2 2 OFF<br>**----- End of picture text -----**<br>


   2. The initial value of control output 2 is reverse of control output 1. 

   3. The timer function of the control output 2 can be set up by the IO-Link communications. (It is able to select ON delay, OFF delay, or one-shot function and select a timer time of 1 to 9,999 ms (T).) 

- **Note:** Shown above are the factory settings. Refer to the index list for the default settings at time of shipment from factory. PNP/COM output logic can be reversed by IO-Link communication. The operation indicator (orange) lights up when control output 1 is ON or communication output is 1. 

## **Nomenclature** 

**E3AS-L200 E3AS-L80** 

**==> picture [107 x 65] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operation indicator (orange)<br>Stability&Communication<br>indicator (green)<br>**----- End of picture text -----**<br>


**==> picture [42 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Teach button<br>**----- End of picture text -----**<br>


Note: The indicators work differently depending on sensor status. 

**7** 

**E3AS-L Series** 

## **Safety Precautions** 

## **Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/. Warning Indications** 

## **Precautions for Safe Use** 

## **Warning level** 

The following precautions must be observed to ensure safe operation. 

Indicates a potentially hazardous situation **WARNING** which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage. **Caution level CAUTION** Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. **Precautions for** Supplementary comments on what to do **Safe Use** or avoid doing, to use the product safely. Supplementary comments on what to do **Precautions for** or avoid doing, to prevent failure to **Correct Use** operate, malfunction or undesirable effect on product performance. 

- (1) Do not reverse the power supply connection or connect to an AC current. 

- (2) Do not short the load. 

- (3) Be sure that before making supply the supply voltage is less than the maximum rated supply voltage (30 VDC). 

- (4) Do not use the product in environments subject to flammable or explosive gases. 

- (5) Do not use the product under a chemical or an oil environment without prior evaluation. 

- (6) Do not attempt to modify the product. 

## **Precautions for Correct Use** 

- (1) Do not hit the product using a hammer for installation. 

- (2) The product must be installed with the specified torque or less. For M8 connector, the proper tightening torque is from 0.3 to 0.4 Nm. For M12 connector, the proper tightening torque is from 0.39 to 0.49 Nm. In case of M12 smartclick connector, manually tighten the connector. 

## **Meaning of Product Safety Symbols** 

- (3) Do not use the product in any atmosphere or environment that exceeds the ratings. 

**General prohibition** Indicates the instructions of unspecified prohibited action 

- (4) Output pulses may occur when the power supply is turned OFF. We recommend that you turn OFF the power supply to the load or load line first. 

**Caution, fire** Indicates the possibility of fires under specific conditions 

**==> picture [34 x 109] intentionally omitted <==**

- (5) Use an extension cable less than 100 m long for Standard I/O mode and less than 20 m for IO-Link Communication mode. 

- (6) Do not pull on the cable with excessive strength. 

- (7) Please wait for at least 100 ms after turning on the product's power until it is available for use. 

**General Caution** Indicates unspecified general alert 

- (8) Though this is type IP67, do not use in the water, rain or outdoors. 

- (9) If the Sensor wiring is placed in the same conduits or ducts as high-voltage or high-power lines, inductive noise may cause malfunction or damage. Wire the cables separately or use a shielded cable. 

**Caution, explosion** Indicates the possibility of explosion under specific conditions 

- (10) Do not use the product in locations subject to direct sunlight. 

- (11) Do not use the product where humidity is high and dew condensation may occur. 

- (12) Do not use the product where corrosive gases may exist. 

## **WARNING** 

**This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purpose.** 

**Do not use the product with voltage in excess of the rated voltage. Excess voltage may result in malfunction or fire.** 

## **CAUTION** 

**Its component may be damaged and/or degree of protection may be degraded. Please do not apply high pressure water intensively at one place during cleaning.** 

- (13) If high-pressure washing water and so on hits the teach button, it might lead to malfunctioning. So, consider use of the key lock function. 

- (14) Do not apply high-pressure washing water directly to the sensor's light emitting / receiving surface from a short distance. As the antifouling feature may be impaired, keep a sufficient distance from the light emitting / receiving surface. 

- (15) Do not use the product at a location subject to shock or vibration. 

- (16) To use a commercially available switching regulator, FG (frame ground) must be grounded. 

- (17) Do not use organic solvents (e.g. paint thinner and alcohol) for cleaning. Otherwise optical properties and protective structure may deteriorate. 

- (18) Be sure to check the influence caused by surrounding environments such as background objects and LED lighting before using the product. 

- (19) Please dispose in accordance with applicable regulations. 

**Never use the product with an AC power supply. Otherwise, explosion may result.** 

**8** 

**E3AS-L Series** 

**(Unit: mm) Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.** 

## **Dimensions** 

## **Sensors** 

**Pre-wired Models/Pre-wired Connector Models E3AS-L200** □ **(-M1TJ/-M3J) E3AS-L80** □ **(-M1TJ/-M3J)** 

**==> picture [383 x 307] intentionally omitted <==**

**----- Start of picture text -----**<br>
M12 Pre-wired Smartclick Connector type<br>14 E3AS-L200 □ -M1TJ/E3AS-L80 □ -M1TJ<br>7.6<br>4.25 dia. vinyl-insulated<br>Operation indicator (orange) round cable with 4 conductors.<br>2 1<br>Stability&Communication indicator (green) 3 4<br>M12×P1<br>Teach button<br>23.4<br>22<br>11.4 Two, M3 M8 Pre-wired connector type<br>1.5 3 E3AS-L200 □ -M3J/E3AS-L80 □ -M3J<br>Receiver  4.6 4.25 dia. vinyl-insulated<br>(12.1) lens round cable with 4 conductors.<br>2 4<br>9.8 la | 25.4 ; |<br>37.9 39.3<br>1 3<br>M8×P1<br>rfN Emitter  V ea l&<br>lens<br>7.9 Minimum bending radius/unbendable<br>length of cord<br>4.25 dia. vinyl-insulated round cable<br>5.1 with 4 conductors (Conductor cross section: 0.2 mmdiameter: 1.1 mm [2]  (AWG24), Insulator ), Standard length: 2 m Unbendable length5 mm<br>Minimum bending radius<br>R13 mm<br>**----- End of picture text -----**<br>


**==> picture [324 x 243] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connector Models<br>14<br>E3AS-L200 □  M3 7.6<br>E3AS-L80 □  M3<br>Operation indicator (orange)<br>Stability&Communication indicator (green)<br>Teach button<br>22<br>11.4 Two, M3 3<br>1.5<br>(12.1) Receiver lens 4.6 hS<br>9.8 25.4<br>37.9<br>Emitter<br>lens<br>7.9<br>a NY<br>BS = M8×P1<br>5.1<br>9.6<br>**----- End of picture text -----**<br>


**9** 

**E3AS-L Series** 

## **Accessories (Sold Separately)** 

## **Mounting Brackets** 

**E39-L201** 

**==> picture [391 x 430] intentionally omitted <==**

**----- Start of picture text -----**<br>
22<br>Photoelectric Sensor  3<br>Accessory are installed<br>(Example of E3AS-L200 □ ) 11.4<br>(Four, R1.8) — 22.4 y Maer<br>16<br>4<br>3.5<br>3.5<br>9 |<br>6.8 8.5<br>rl<br>31<br>8.3<br>14.5 *<br>Emitting center 17.4<br>25.4<br>48<br>41.4<br>R25.4 16 24.1 8.1 16<br>T3<br>Li 27 b1 = & es<br>Photoelectric Sensor<br>Accessory are installed<br>11.9 (Example of E3AS-L200 □ )<br>15 5.9<br>26.7<br>16.9<br>13.3 6.7<br>7 Four, 3.5 dia. *<br>Emitting center<br>17.4<br>46 45° 45° 25.4 25.4<br>ai 9.4 =<br>76<br>8.1<br>45° 45° 30.3 38.4<br>33 33<br>18 14° 18<br>8.5<br>T3 (Two, R1.8) 3.5 7 3.5<br>15.7<br>18.7 R12<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

- Accessories 

2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W) 

**E39-L202** 

Material: Stainless steel (SUS304) 

- Accessories 

- 2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W) 

## **E39-L203** 

**Photoelectric Sensor Accessory are installed (Example of E3AS-L200** □ **)** 

**==> picture [247 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
T3 22<br>13.5 3.5 dia. 38.2 32.8<br>6.7 7<br>6<br>31.9<br>42 28.6 R25.4<br>6<br>3.5<br>(Two, R1.8)<br>(Four, R1.8) Two, 3.5 20°<br>44<br>Material: Stainless steel (SUS304)<br>* Accessories<br>2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

- Accessories 

**==> picture [180 x 72] intentionally omitted <==**

**----- Start of picture text -----**<br>
19.85<br>6.4 32.9<br>Emitting center *<br>17.4<br>8.1 R25.4<br>**----- End of picture text -----**<br>


**10** 

**E3AS-L Series** 

## **E39-L204** 

**==> picture [344 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
50° Photoelectric Sensor<br>Accessory are installed<br>2-3.5 (Example of E3AS-L200 □ )<br>(Four, R1.8)<br>55 dia.<br>41.5 dia.<br>14.3<br>: 28.5<br>(28.5)<br>22.1<br>12.7 6 6.4<br>*<br>1 1<br>6.6<br>21.9 17.4<br>50.2 Two, R25.4 Two, 3.5 45.2<br>Emitting center 8.1<br>23.8<br>15.7<br>R25.4<br>| qhany<br>T3<br>Two, 5 dia.<br>**----- End of picture text -----**<br>


**==> picture [108 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Material: Stainless steel (SUS304)<br>**----- End of picture text -----**<br>


* Accessories 

2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W) 

## **E39-L211** 

**==> picture [234 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
(Four, R1.8)<br>16<br>4 3.5<br>3.5<br>| HET 9<br>6.8 8.5<br>31<br>y - 8.3 14.5<br>69.7<br>R25.4<br>37.5<br>T3<br>27 ——— [|]<br>Material: Stainless steel (SUS304)<br>* Accessories<br>2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)<br>**----- End of picture text -----**<br>


**==> picture [206 x 175] intentionally omitted <==**

**----- Start of picture text -----**<br>
Photoelectric Sensor  22<br>3<br>Accessory are installed<br>(Example of E3AS-L200 □ ) 11.4<br>22.4<br>6.4 *<br>Emitting center<br>17.4<br>25.4<br>8.1<br>45.6<br>37.5<br>**----- End of picture text -----**<br>


**11** 

**E3AS-L Series** 

**E39-L212** 

**==> picture [473 x 504] intentionally omitted <==**

**----- Start of picture text -----**<br>
Photoelectric Sensor<br>j 11.9 Accessory are installed (Example of E3AS-L200 □ )<br>5.9<br>15<br>26.7<br>13.9<br>13.3 6.7<br>7 Four, 3.5 dia *<br>Emitting center<br>17.4<br>25.4 25.4<br>10.3<br>8.1<br>71.6<br>97.6<br>60<br>52<br>8.5<br>T3 (Two, R1.8) 3. em 5 7 3.5 286<br>16.6 R12<br>19.6<br>Material: Stainless steel (SUS304)<br>* Accessories<br>2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)<br>50° Photoelectric Sensor<br>Accessory are installed<br>2-3.5 (Example of E3AS-L200 □ )<br>= r (Four, R1.8)<br>55 dia.<br>41.5 dia.<br>14.2<br>28.5<br>12.7 22.1<br>6<br>6.4<br>(Four, R1.8) L 1 CoN y * = =<br>6.6<br>21.9 17.4<br>Two, R25.4 Two, 3.5<br>8.1<br>72.6 67.6 Emitting center R25.4<br>9<br>45° 46.5<br>38.4 38.6<br>30.4<br>16.7<br>T3 Two, 5°<br>**----- End of picture text -----**<br>


Material: Stainless steel (SUS304) 

- Accessories 

- 2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W) 

## **E39-L214** 

Material: Stainless steel (SUS304) 

- Accessories 

- 2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W) 

**12** 

**OMRON AUTOMATION AMERICAS HEADQUARTERS •** Chicago, IL USA **•** 847.843.7900 **•** 800.556.6766 **•** automation.omron.com 

## **OMRON CANADA, INC. • HEAD OFFICE** 

Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com 

## **OMRON ELECTRONICS DE MEXICO • HEAD OFFICE** 

Ciudad de México • 52.55.5901.4300 • 01.800.386.6766 • mela@omron.com 

## **OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE** 

São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br 

## **OMRON ARGENTINA • SALES OFFICE** 

Buenos Aires, Argentina • +54.11.4521.8630 • +54.11.4523.8483 mela@omron.com 

## **OMRON ELECTRONICS DE MEXICO • SALES OFFICE** 

San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • mela@omron. **OTHER OMRON LATIN AMERICA SALES** com +54.11.4521.8630 • +54.11.4523.8483 • mela@omron.com 

## **OMRON ELECTRONICS DE MEXICO • SALES OFFICE** 

Eugenio Garza Sada,León, Gto • 01.800.386.6766  • mela@omron.com 

## _Authorized Distributor:_ 

## **Controllers & I/O** 

- Machine Automation Controllers (MAC) • Motion Controllers • Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O **Robotics** • Industrial Robots • Mobile Robots 

## **Operator Interfaces** 

- Human Machine Interface (HMI) 

## **Motion & Drives** 

- Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems • Frequency Inverters **Vision, Measurement & Identification** 

- Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems 

## **Sensing** 

- Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors • Rotary Encoders • Ultrasonic Sensors **Safety** • Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems • Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices • Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays **Control Components** • Power Supplies • Timers • Counters • Programmable Relays • Digital Panel Meters • Monitoring Products **Switches & Relays** • Limit Switches • Pushbutton Switches • Electromechanical Relays • Solid State Relays **Software** • Programming & Configuration  • Runtime 

E588BI-E3-02             Note: Specifications are subject to change. © 2019 Omron. All Rights Reserved. 

Printed in U.S.A. 

_Printed on recycled paper._