E39L142

**Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R** 

CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1 

## **Mounting Brackets [Refer to** _**Dimensions**_ **on page** _**5**_ **.]** 

|**Model**|**Model**|**Model**|**Fitting**<br>**materials**|**Count**|**Accessories**|**Accessories**|**Accessories**|**Applicable sensor**<br>**(mounting pitch on**<br>**sensor side)**|**Page**|
|---|---|---|---|---|---|---|---|---|---|
||||||**Description**|**Material**|**Count**||**Dimensions**|
|**E39-L2**|||Iron, zinc plating|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-RS30E4@(25.4)<br>E3S-R1E4@ (25.4)|5|
|**E39-L4**|||Iron, zinc plating|1|Slotted/Phillips screws M3×12<br>(with spring and plain washers)|Iron, zinc plating|2|||
|||||||||E32-T16 (20)||
|||||||||||
|**E39-L6**|||Iron, zinc plating|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-RS30E4@(25.4)<br>E3S-R1E4@ (25.4)||
|**E39-L31**|||Iron, zinc plating|1|Slotted/Phillips screws, M3×12<br>(with springwashers)|Iron, zinc plating|2|E3C-S50 (8)||
|**E39-L40**|||Iron, zinc plating|1|Phillips screws M4×25<br>(with spring and plain washers)<br>Nuts M4|Iron, zinc plating<br>Iron, zinc plating|2<br>2|||
|||||||||E3JK||
|||||||||||
|**E39-L41**|||Iron, zinc plating|2|Phillips screws M3×14<br>(with spring washers)<br>Plain washer M3|Iron, zinc plating<br>Iron, zinc plating|4<br>4||6|
|||||||||E3C-1 (10)||
|||||||||||
|**E39-L42**|||Iron,<br>black coating|2|Phillips screws M3×10<br>(with spring washers)<br>Plain washer M3|Iron, zinc plating<br>Iron, zinc plating|4<br>4|E3C-2 (20)<br>E3C-DS10 (19)<br>E3C-VS1G (19)<br>E3C-VS3R(19)||
|**E39-L43**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×8<br>(with springand plain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)||
|**E39-L44**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×8<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)||
|**E39-L51**|||Iron, zinc plating|1|Slotted/Phillips screws M4×30<br>(with spring and plain washers)<br>Nuts M4|Iron, zinc plating<br>Iron, nickelplating|2<br>2|E3JM (40)||
|**E39-L53**|||Iron, zinc plating|1|---|---|---|||
|||||||||E3JM (40)||
|||||||||||
|**E39-L54V**|||Stainless steel<br>(SUS304)|1|---|---|---|E32-T54V|6|
|**E39-L69**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×12<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3S-R1@(20)<br>E3S-R3@ (20)||
|**E39-L70**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×12<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3S-R6@(20)<br>E3S-R8@ (20)||
|**E39-L83**|||Stainless steel|1|---|---|---|E32-T24S<br>E32-A03||
|**E39-L85**|||Stainless steel<br>(SUS304)|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-C (25.4)||
|**E39-L86**|||Stainless steel<br>(SUS304)|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-C (25.4)||
|**E39-L87**|||Stainless steel<br>(SUS304)|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-C (25.4)<br>E3S-CR62/67(25.4)||
|Note:||Applicable models that appear shaded come with the Mounting Brackets at left as accessories.||||||||



Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 

**1** 

**E39-L/F39-L/E39-S/E39-R** 

|**Model**|**Model**|**Model**|**Fitting**<br>**materials**|**Count**|**Accessories**|**Accessories**|**Accessories**|**Applicable sensor**<br>**(mounting pitch on**<br>**sensor side)**|**Page**|
|---|---|---|---|---|---|---|---|---|---|
||||||**Description**|**Material**|**Count**||**Dimensions**|
|**E39-L93FH**|||Stainless steel<br>(SUS304)|1|Holder (upper)<br>Holder (lower)<br>Pipe<br>Bolts M4×12 with Hexagonal<br>holes<br>Bolts M4×30 with hexagonal<br>holes<br>Phillips screws M3×12<br>(with spring and plain washers)<br>Spring washer M4<br>Plain washer M4<br>Nuts M4|Heat-resistant ABS resin<br>66 nylon<br>Stainless steel (SUS304)<br>Iron, nickel plating<br>Iron, nickel plating<br>Stainless steel (SUS304)<br>Iron, nickel plating<br>Iron, nickel plating<br>Iron, nickelplating|1<br>1<br>1<br>2<br>1<br>2<br>1<br>1<br>3|E3Z (25.4)<br>E3S-R1@/R3@<br>/R6@/R8@(20)<br>E39-R1/E39-R3|8|
|**E39-L93FV**|||Stainless steel<br>(SUS304)|1||||||
|**E39-L93H**|||Stainless steel<br>(SUS304)|1||||||
|**E39-L93V**|||Stainless steel<br>(SUS304)|1||||||
|**E39-L93XY**|||---|---|Holder<br>Pipe<br>Bolts M5×16 with hexagonal holes<br>Nuts M5|66 nylon<br>Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel(SUS304)|1<br>1<br>2<br>2|E3Z (25.4)<br>E3S-R1@/R3@<br>/R6@/R8@(20)<br>E39-R1/E39-R3|9|
|**E39-L94**|||Iron, zinc plating|2|Phillips screws M3×10<br>Nuts M3|Iron, zinc plating<br>Iron, zincplating|4<br>4|E32-T16P (19)||
|**E39-L96**<br>* For installation<br>of Sensor<br>Adjuster E39-<br>L93|||Stainless steel<br>(SUS304)|1|Phillips screws M3×6<br>(with spring and plain washers)|Iron, nickel plating|2|E39-R1||
|**E39-L97**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×12<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3S-R1@/R3@(20)||
|**E39-L98**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×12<br>(with spring and plain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)<br>E3S-R6@/R8@ (20)||
|**E39-L102**|||Stainless steel<br>(SUS304)|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-C (horizontal type)<br>(25.4)|10|
|**E39-L103**|||Stainless steel<br>(SUS304)|1|Hexagonal bolts M4×12<br>(with springandplain washers)|Iron, zinc plating|2|E3S-C (vertical type) (25.4)<br>E3S-CR62/67(25.4)||
|**E39-L104**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×8<br>(with spring and plain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)||
|||||||||E32-R21 (for installation of<br>E39-R3) (25.4)||
|**E39-L109**|||Stainless steel<br>(SUS430)|1|---|---|---|E32-S15-@(13.2)||
|**E39-L114**|||Stainless steel<br>(SUS430)|2|Phillips screws M5×10|Iron, zinc plating|4|E3MC (28)||
|**E39-L115**|||Stainless steel<br>(SUS304)|1|Phillips screws M5×8<br>Slotted/Phillips screws M3×8|Iron, zinc plating<br>Iron, nickelplating|4<br>2|E3MC||
|**E39-L116**|||Stainless steel<br>(SUS304)|1|---|---|---|E3T-S (9/15)|11|
|**E39-L117**|||Stainless steel<br>(SUS304)|1|---|---|---|E3T-S (9/15)||
|**E39-L118**|||Stainless steel<br>(SUS304)|1|---|---|---|E3T-S (9/15)||
|**E39-L119**|||Stainless steel<br>(SUS304)|1|---|---|---|E3T-F (8)||
|**E39-L120**|||Stainless steel<br>(SUS304)|1|---|---|---|E3T-F (8)||
|**E39-L127-T1**|||Iron, zinc plating|1|Phillips screws M2.3×8<br>Springwasher M2.3|Iron, zinc plating<br>Iron, zincplating|4<br>4|E3C-S10 (7.5)||
|**E39-L127-T2**|||Iron, zinc plating|1|Phillips screws M2.3×8<br>Springwasher M2.3|Iron, zinc plating<br>Iron, zincplating|4<br>4|||
|**E39-L127-T3**|||Iron, zinc plating|1|Phillips screws M2.3×8<br>Springwasher M2.3|Iron, zinc plating<br>Iron, zincplating|4<br>4|||
|Note:||Applicable models that appear shaded come with the Mounting Brackets at left as accessories.||||||||



Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 

**2** 

**E39-L/F39-L/E39-S/E39-R** 

|**Model**|**Model**|**Model**|**Fitting**<br>**materials**|**Count**|**Accessories**|**Accessories**|**Accessories**|**Applicable sensor**<br>**(mounting pitch on**<br>**sensor side)**|**Page**|
|---|---|---|---|---|---|---|---|---|---|
||||||**Description**|**Material**|**Count**||**Dimensions**|
|**E39-L131**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M4×25<br>Spring washer M4<br>Plain washer M4<br>Nuts M4|Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel(SUS304)|2<br>2<br>2<br>2|E3G-R1@(25)<br>E3G-L7@(25)|12|
|**E39-L132**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M4×25<br>Spring washer M4<br>Plain washer M4<br>Nuts M4|Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel(SUS304)|2<br>2<br>2<br>2|E3G-R1@(25)<br>E3G-L7@(25)||
|**E39-L135**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M4×35<br>Spring washer M4<br>Plain washer M4<br>Nuts M4|Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel(SUS304)|2<br>2<br>2<br>2|E3G-MR19 (T)<br>E3G-ML79 (T)||
|**E39-L136**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M4×35<br>Spring washer M4<br>Plain washer M4<br>Nuts M4|Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel (SUS304)<br>Stainless steel(SUS304)|2<br>2<br>2<br>2|E3G-MR19 (T)<br>E3G-ML79 (T)||
|**E39-L142**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×8<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)||
|**E39-L143**|||Stainless steel<br>(SUS304)|1|None|---|---|E3X-DA-S/MDA<br>E3X-NA<br>E3C-LDA<br>E2C-EDA<br>E4C-UDA||
|**E39-L144**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×12<br>(with springandplain washers)|Stainless steel (SUS304)|2|E3Z pre-wired model<br>(25.4)|13|
|**E39-L148**|||Stainless steel<br>(SUS304)|1|None|---|---|E3X-NA||
|**E39-L149**|||Iron,<br>black coating|1|None|---||E3Z-G||
|**E39-L150**|||Stainless steel<br>(SUS304)|1|Holder/bracket<br>Shaft (brace)<br>Bolt with hexagonal hole<br>Nut<br>Phillips screw<br>Slotted/Phillips screws|PBT (polybutylene tereph-<br>thalate)<br>Stainless steel (SUS304)<br>Stainless steel (SUSXM7)<br>Stainless steel (SUS304)<br>Stainless steel (SUSXM7)<br>Stainless steel(SUS304)|1<br>1<br>1<br>1<br>1<br>2|E3Z (25.4)<br>E3S-R6@/R8@(20)<br>E39-R3||
|**E39-L151**|||Stainless steel<br>(SUS304)|1|Holder/bracket<br>Shaft (brace)<br>Bolt with hexagonal hole<br>Nut<br>Phillips screw<br>Slotted/Phillips screws|PBT (polybutylene tereph-<br>thalate)<br>Stainless steel (SUS304)<br>Stainless steel (SUSXM7)<br>Stainless steel (SUS304)<br>Stainless steel (SUSXM7)<br>Stainless steel(SUS304)|1<br>1<br>1<br>1<br>1<br>2|E3Z (25.4)<br>E3S-R6@/R8@(20)<br>E39-R3||
|**E39-L153**|||Stainless steel<br>(SUS304)|1|Slotted/Phillips screws M3×8<br>(with springandplain washers)|Stainless steel (SUSXM7)<br>Stainless steel(SUS304)|2|E3Z pre-wired model<br>(25.4)||
|Note:||Applicable models that appear shaded come with the Mounting Brackets at left as accessories.||||||||



Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 

**3** 

**E39-L/F39-L/E39-S/E39-R** 

## **Contact Mounting Plates [Refer to** _**Dimensions**_ **on page** _**13**_ **.]** 

|**Model**|**Model**|**Model**|**Material**|**Count**|**Applicable type**|**Page**|
|---|---|---|---|---|---|---|
|||||||**Dimensions**|
|**E39-L60**|||PBT (polybutylene terephthalate)|1|E3S-R@6|13|
|Note:||Applicable models that appear shaded come with the Mounting Brackets at left as accessories.|||||



## **Slits** 

|**Model**|**Model**|**Model**|**Slit width**|**Installationprocedure**|**Applicable type**|
|---|---|---|---|---|---|
|**E39-S39**|||Width 1×20 mm|Seal type|E3JM-10@4 (T)-N<br>E3JK-5@@-N|
|**E39-S60**|||Width 0.5, 1×15 mm|Seal type|E32-T16|
|**E39-S61**|||Width 0.5, 1, 2, 4×11 mm|Plug-in type|E3S-CT@1|
|**E39-S63**|||0.5-mm dia., 1 mm||E3T-ST1@|
|**E39-S64**|||0.5-mm dia., 1 mm||E3T-FT1@|
|**E39-S65A**|||0.5 mm dia.||E3Z-T@@|
|**E39-S65B**|||1-mm dia.|||
|**E39-S65C**|||2-mm dia.|||
|**E39-S65D**|||Width 0.5×10 mm|||
|**E39-S65E**|||Width 1×10 mm|||
|**E39-S65F**|||Width 2×10 mm|||
|**E39-S68**|||Width 0.5, 1×13.4 mm|Seal type|E32-T16P<br>E32-T16PR|
|Note:||Applicable models that appear shaded come with the Slits at left as accessories||||



Note: Applicable models that appear shaded come with the Slits at left as accessories 

## **Reflectors (Refer to** _**Dimensions**_ **on page 14.)** 

|**Name**|**Reflectors**|**Reflectors**|**Non-fogging**<br>**reflective plate**|**Reflectors**|**Reflectors**|**Reflectors**|**Special Reflec-**<br>**tor for E3ZM-B**|
|---|---|---|---|---|---|---|---|
|**Item**<br>**Model**|**E39-R1**|**E39-R1S**|**E39-R1K**|**E39-R2**|**E39-R6**|**E39-R10**|**E39-RP1**|
|**Directional angle**|30°min.*1|||30°min.*2|30°min.|||
|**Ambient operating**<br>**temperature range**|−25 to 55°C||||||−40 to 60°C|
|**Ambient storage**<br>**temperature range**|−40 to 70°C||−40 to 55°C|−40 to 70°C||||
|**Ambient operating**<br>**humidity range**|35% to 85%|||||35% to 95%|35% to 85%|
|**Ambient storage**<br>**humidity range**|35% to 95%|||||||
|**Degree of protection**|IEC IP67|||||||
|**Accessories**|---|||||||



*1. 40° or higher for E3JM-R and E3JK-R. 

*2. 40° or higher for E3G-R. 

|**Name**|**Small reflector**|**Small reflector**|**Small reflector**|**Small reflector**|**Tape reflector** *|**Tape reflector** *|**Tape reflector** *|
|---|---|---|---|---|---|---|---|
|**Item**<br>**Model**|**E39-R9**|**E39-R3**|**E39-R4**|**E39-R37-CA** *|**E39-RS1**<br>**E39-RS1-CA**|**E39-RS2**<br>**E39-RS2-CA**|**E39-RS3**<br>**E39-RS3-CA**|
|**Directional angle**|30°min.|||||||
|**Ambient operating**<br>**temperature range**|−25 to 55°C|||||||
|**Ambient storage**<br>**temperature range**|−40 to 70°C|||0 to 40°C||||
|**Ambient operating**<br>**humidity range**|35% to 95%|35% to 85%||||||
|**Ambient storage**<br>**humidity range**|35% to 95%|||35% to 85%||||
|**Degree of protection**|IEC IP67|||||||
|**Accessories**|---|Mounting Brack-<br>ets E39-L104<br>(with screws)|---|Phillips screws M3<br>×3, spring wash-<br>ers M3, nuts M3|---|||



* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. 

|**Name**|**Laser Reflectors**|**Laser Reflectors**|**Laser Reflectors**|**Laser Reflectors**|**Laser Reflectors**|
|---|---|---|---|---|---|
||**Standard**||**Short-distance transpar-**<br>**ent object detection**|**Sheets**||
|**Item**<br>**Model**|**E39-R12**|**E39-R13**|**E39-R14**|**E39-RS4**|**E39-RS5**|
|**Ambient operating**<br>**temperature range**|−10 to 55°C (No icing)|||||
|**Ambient storage**<br>**temperature range**|−25 to 70°C (No icing)|||||
|**Ambient operating**<br>**humidity range**|35 to 85% (No condensation)|||||
|**Ambient storage**<br>**humidity range**|35 to 85% (No condensation)|||||



**4** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [43 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
(Unit: mm)<br>**----- End of picture text -----**<br>


## **Mounting Bracket Dimensions** 

**==> picture [511 x 701] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.<br>E39-L2 E39-L4<br>4 Four, R1.6<br>5<br>3.2<br>20 33<br>4<br>3.2<br>Four, 20<br>1.2 R1.6 11<br>2.3<br>3.2<br>5.5<br>92.1<br>Material: Iron 82.1<br>20±0.2<br>10.2 58<br>20.2<br>Optical axis<br>Material: Iron<br>5<br>41 25.4 Two,<br>4.2 3.2 dia.<br>4.2 Two, M4<br>slotted,<br>hexagonal<br>5.6 2.1R 5 bolts 1.6<br>25 25.4 9 29.1<br>E39-L6 E39-L31<br>6.5 Four, R1.6<br>25.4 3.2<br>4.2<br>12 17<br>5 20 10.5<br>4.2 3.2<br>3.9<br>4.2 5 6<br>6<br>Material: Iron 1.6 5 4.2 (R2.1) Material: Iron 1 4.2 3.93.2<br>4.2 10.5<br>12 20 17<br>5<br>6.5 3.2<br>25.4<br>12<br>39<br>R3 8 Two, M3<br>6<br>4.5 dia. max.<br>Pushing out height: 0.6 min.<br>1<br>E39-L40<br>18±0.1<br>R3.2 6 dia. R3.2<br>12 22<br>10±0.1<br>6.4<br>4 9 6.4<br>Two, R5<br>42±0.1 7<br>2 50 Two, R5<br>Material: Iron 40±0.1 5<br>Two, 4.4 dia.<br>Two, R5.6 Two, R5 Two, R5<br>R2.2 60<br>R56.6±0.1<br>31.2<br>21.9<br>60°<br>10° 45° R2.2 24 4.4<br>58<br>**----- End of picture text -----**<br>


**5** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [507 x 680] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L41 E39-L42<br>R1.6<br>R1.6<br>7 5.5 11 3.2 8 6.5<br>12<br>3.2 5 3.2<br>1 13.5 4.5 3.2<br>5 3.2 23<br>3.2 R1.6 27<br>ear Va<br>1 4.5 R1.6 3.2<br>Material: Iron 15.5 3.2<br>11.5 10<br>iva Fe<br>17.5 Material: Iron 21<br>17 15.5<br>=e R3 10  = ±0.1 2-M3 i aon<br>6<br>4.5 dia. max. ee<br>Pushing out height: 0.6 min.<br>1<br>_—<br>E39-L43 E39-L44<br>30<br>1.2<br>3.5 3.5 R2<br>7 16.2<br>8.7<br>23.2<br>1.2 3.5 R3.5 1.2<br>Four, 3.2 dia. 25.4 40<br>9<br>R2 6<br>3.2 dia.<br>7.5 20° Material: Stainless steel (SUS304) 18 20° 36<br>R2 3.4 15 6 3.2<br>14<br>Material: Stainless<br>"OT (er eS |<br>steel (SUS304) 13 R1 6 5<br>a Cain 3.4 a R1 R1 a 31.2 a<br>3.4<br>E39-L51 E39-L53<br>35.5 6.5 20 Two, 3 dia. R3.2<br>ee re 12 a |<br>E3A2 12.4 22<br>E3A-M<br>45 E3A3<br>OA-5, OA-5N 6.4 R3.2 6 dia. 6.4<br>2 — 12.4 elu 18 6<br>| El 39.5<br>Material: Iron<br>37.5<br>a, _ 1.6 —— 35<br>4.5 4.5 dia.<br>Material: Iron R2.25<br>E3A2, OA-5N 13.5 6.5<br>f + — 29.5<br>70 E3A-M, OA-5 20<br>E3A3<br>5 40 [±][0.2]<br>54.5<br>@ te<br>58<br>E39-L54V E39-L69<br>3.2<br>5 20 [±][0.2]<br>4.5 8 3.110.716.5<br>7.2<br>Material: Stainless steel (SUS304) 4.1 3.1 7.2<br>1.2 3. 2<br>4 23 15 3 .1<br>7.2<br>7.2<br>16.5<br>ie Material: Stainless steel (SUS304) S Y 3.1 10.7<br>0.5 4.1 5 20 [±][0.2]<br>f lay ea 30 m<br>R20±0.1<br>R25.4±0.1<br>**----- End of picture text -----**<br>


**6** ~~a~~ 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [506 x 676] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L70 E39-L83<br>16.3 20±0.2 0.4 Six, R1.2 1.8<br>20±0.2 16.3<br>3.1 10.7 3.2<br>16.5<br>7.2<br>3.5 4.3 11 17.6<br>3.1 Two, R1.6<br>Material: Stainless steel (SUS304) 7.2 3.1 2.05 7.2<br>R1.6<br>1.2 2.05 31.7±0.1 2.05 Material: Stainless steel 2.8 fa 3.210<br>3.1 11.4 3.1<br>7.2 7.2<br>16.5<br>10.7<br>L e 41.7<br>E39-L85 9.8 15.6 E39-L86<br>& 4.2 Fes} ES<br>20<br>2.6<br>4.2 32 [37] (44.7)<br>15<br>YS. 9.2 4.2 Se 8 vem 32.239<br>4.2<br>8<br>9.2<br>12.9 2.6<br>16 Material: Stainless steel (SUS304) 4.2<br>Material: Stainless steel (SUS304) 4.2 31 12.9<br>ce ' 43.8 re ay, pore 43.831 JJ<br>31<br>1.5 12.9<br>19<br>4.2<br>9.2<br>20<br>4.2 12<br>28.9 [32.2]<br>1.5 15.1<br>7  m7<br>= Pie |, | |<br>E39-L87<br>10<br>9.2 4.2<br>25.4 [41]<br>“A seauee<br>4.2<br>OL<br>4.2<br>10<br>25<br>12.4<br>4.1<br>1.5 6.2 8.2<br>7.2<br>3 L a rena<br>25.4<br>4.2<br>Material:  75.6<br>Stainless steel (SUS304)<br>43.7<br>2.6<br>15<br>**----- End of picture text -----**<br>


**7** ~~a~~ 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [512 x 604] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L93FH E39-L93FV<br>26.3<br>26.3<br>20.9<br>48 20.9 48<br>8<br>E3Z 8 E3Z<br>15° 15°<br>15° 15°<br>12 dia. 12 dia.<br>208<br>215<br>183 188 176 181<br>54 59 48 53<br>30 6 24<br>12<br>35 Two, 6.6 dia.<br>35 50<br>Two, 6.6 dia.<br>50 45 53<br>26 22.5 29<br>48<br>E39-L93H E39-L93V<br>26.3<br>26.3<br>20.9 48 20.9 48<br>8 E3Z 8 E3Z<br>15° 15°<br>15° 15°<br>12 dia.<br>216 12 dia. 208<br>184 189 176 181<br>54 59 44 49<br>30 20<br>8 10<br>32<br>Two, 6.6 dia.<br>46<br>Two, 6.6 dia.<br>34 27 10 48 15<br>24 8<br>14<br>32<br>45<br>**----- End of picture text -----**<br>


**8** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [511 x 570] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L93XY E39-L94<br>4 Four, R1.6<br>197<br>3.2 4.8<br>165 8<br>22 20+0.2   0<br>35<br>4<br>23 Pipe (B) 3.2<br>38 15 1.2 20<br>20.9 26.3 2.3 Two, R1.6<br>3.2<br>5.8<br>E3Z<br>Holder (A) 40 19 [±][0.2]<br>170 15° 15° 8 52<br>Material: Iron<br>11 12 dia. 3.2 dia.<br>24<br>48<br>E39-L96<br>Two, M3 Tap processing<br>213 4.3 dia.<br>189 45°<br>17.5°<br>60<br>17.5°<br>45°<br>E39-R1 reflector 9.5 Center   27 E39-L96<br>(order separately) 15.5<br>29.5 of pole  34.5<br>12 dia. brace<br>Material:<br>Stainless steel<br>Note: The E39-L93XY consists of only the one joint holder<br>(SUS304)<br>(A) and pipe, and the two hexagonal bolts and nuts. It  2-mm-thick<br>cannot be mounted to the Sensor alone.<br>E39-L97 E39-L98<br>Mounting Holes Mounting Holes 30° 30°<br>30° 30° Two, M6<br>Two, M6 Stainless steel<br>(SUS 304) Two, R28<br>44 [±][0.2] 56 dia.<br>44 [±][0.2] 56 dia.<br>Stainless steel<br>(SUS 304)<br>Four, R3.3<br>Four, R3.3 Two, R22 E3S-R 8.2 4  Two, R22 6.5<br>(For E3S-B)<br>E3S-R 20 13.5 16 (For E3Z) (For E3S-R)<br>An attached An attached<br>screw 2.6 61 screw 25.4 16 20<br>34 20 26 38.5 48<br>25<br>16<br>2 3 20<br>16<br>56 15 20 (A)* 2 8<br>50 56 24<br>(E3S-R) * Mounting Bracket can be attached to side (A) 34<br>4.6<br>4.6<br>**----- End of picture text -----**<br>


**9** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [529 x 491] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L102 E39-L103<br>25.4 [±][0.1] 31 [±][0.1]<br>= 4.2 12 a 12<br>9.2 20 9.2 20<br>4.2<br>4.2 8.3 4.2<br>6.2 12.9<br>6.2<br>1.5 4.2 8.3 1.5 4.2 12.9<br>|<br>(. mie i [7 nie<br>Material: Stainless steel (SUS304) { 9.2 oa 4.2 9.317.3 Material: Stainless steel (SUS304) 7 9.2 4.2 12 20<br>25.4 [±][0.1]<br>L i 38.2 e ILfHe 3143.8 [±][0.1] sq<br>E39-L104 E39-L109<br>R1.7 R1.7 3.4 Mounting Holes<br>14° 5.8 12.5 [(13.7)] 10.6 Two, M3<br>R20<br>5.4 36<br>R1 3.4 6 4.5 3.4<br>29 6<br>8.2 8.2<br>; 3.2<br>1.2<br>R3.5 16 Two, 3.2 dia. 4636 12<br>Material:<br>Material: Stainless steel (SUS304) (39) 37.8 R25.4 3.23.5 Stainless steel (SUS430) 266 3.4 32.6(14.7)<br>45.8<br>8.8<br>R1 > LU R1.6 [tar] 10°<br>E39-L114 E39-L115<br>6.8 6.8<br>Two,<br>M3 58 28<br>5.2 22 7 Four, 5.5 dia.<br>10<br>1 1 28<br>5.2 8.4 33.2 Six, R2.6 37 26 21 35<br>15° 15°<br>5.2 aeaace i ' | 4e | | 100 fotto H e |<br>33<br>70<br>Material:  R1 R28 R28 54 5 15 11.5<br>Stainless steel (SUS430) 3<br>42<br>Material: Stainless steel (SUS304)<br>| a 50 J J<br>**----- End of picture text -----**<br>


**10** ~~a~~ 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [511 x 364] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L116 E39-L117<br>Nut Plate Nut Plate<br>(Four, R2) (Four, R2)<br>(Two, R1.7)<br>3 3<br>Three,  M2 9 15 20.5 (17.8) 7.5 Three, M2 9 15 20.5<br>4.1 Two, 3.4 R1<br>1.6 (Two, R2) 90°max.<br>7 (Two, R2) 7 1.2<br>5<br>(Two, R1.7) Two, R2 (Two, R2) 2.4<br>4 11.2<br>11 2.2 3.1 4<br>31.2 (Two, R1.1) 9<br>9.5 11.5 18 (23) 15<br>Material:  90° Material:  9<br>Stainless steel (SUS304)1.2-mm-thick R1.5 max. 1.2 10 2.4(Two, R1.2) Stainless steel (SUS304)1.2-mm-thick 3.4 4.5 3.1(Two, R1.7) 5 510 (Two, R1.1)Two, 2.2<br>(11.2)<br>E39-L118 E39-L119<br>Nut Plate<br>(Four, R2) 1.2<br>11.5<br>3 10.5 90°<br>Three, M2 9 15 20.5 11.5 90° 90° 1.2 15<br>22.7 Four, M2 Tap processing<br>8 3.2<br>2.4<br>7 5 4.5 [(Two, R1.7)]<br>2.4 3.1<br>16 12 8<br>4<br>15 9 11.5 18 (23) 9 7 2.4<br>9<br>Material:  Two, 2.2 3.1 Material:<br>Stainless steel (SUS304) (Two, R1.1) 5 3.4 (Four, R2) Stainless steel (SUS304)<br>1.2-mm-thick 1.2-mm-thick<br>**----- End of picture text -----**<br>


**==> picture [507 x 207] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L120 E39-L127-T1<br>4.2 E39-L127-T2 Four, 3.2 dia. (Mounting<br>E39-L127-T3 20 bracket holes)<br>(5.4)<br>4<br>10<br>1 4 1.2<br>22.5 Four, M2.3<br>1.6 5.612 A 5.6 (Mounting sensor screws)<br>Four, M2 Tap processing 2.3<br>8 3 .2 7.5<br>2.4 15<br>30<br>16 12 8<br>9<br>2.4 Two, 5 dia. 20<br>6 1 3.5 Material: Iron A+24<br>Material: Stainless steel (SUS304)<br>1.2-mm-thick Model Dimension A (mm)<br>E39-L127-T1 10<br>E39-L127-T2 20<br>E39-L127-T3 30<br>**----- End of picture text -----**<br>


**==> picture [40 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L120<br>**----- End of picture text -----**<br>


**11** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [508 x 655] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L131 E39-L132<br>6.4<br>Two, R3.2 22 5.5<br>1.5 90° [±][1][°]<br>11.5<br>15° 23.5<br>6.4 23.5 23.5<br>h R34 2-R3.2 - 11.5 a Two, R3.2 11.5<br>35 6.4 Two, R2.2 8.5<br>1.5 25 [±][0.1] Four, R1 5.5 10<br>o> + —b<br>22<br>| R25 R25 25 [±][0.1] “fit 25 [±][0.1] [4.4] E 7 45<br>4.2 4.2<br>65.5<br>es Four, R2.1 6.4 leans R34<br>4.2 dia.<br>Two,4.2 dia. 35.5 Two, R3.2 15°<br>Material:  90° [±][1][°] 23.5<br>Stainless steel (SUS304) 8.5 Material: Stainless steel (SUS304)<br>— 45 ae<br>E39-L135 6.4 Two, R3.2 E39-L136<br>6.4 90<br>15 2<br>18° 28<br>90° [±][1]<br>R44 32 7 Two, R3.2 2°<br>2 48 5° 88<br>x 37 [±][0.1] Two, 4.2 dia. 83<br>JA : "on 28 ——7 74<br>15 72<br>6.4 Two,   5.5 37 Eight, 4.2<br>R3.2<br>20.5<br>74 [±][0.1]<br>5°<br>2-4.2 118 [123] Two,  32 85 74<br>R3.2<br>R82.7<br>Four, R2.1<br>Material:  10°<br>Stainless steel (SUS304) R82.8 54.62 6.4 R44 R82.7<br>5°<br>90° [±][1][°] 18° R82.7 2° 5° Fourteen,<br>, 58 —— Material: Stainless steel (SUS304) R2.1<br>E39-L142 E39-L143<br>14<br>8.7<br>aa<br>22 7<br>15.8<br>14 Four, 3.4-dia. holes<br>34.8<br>(10.3) 2.5 2216 3<br>37 25.4<br>Poy 55 @ Se 5.3 7.3 os<br>26.8 7<br>R12 4.5 15.3 Two, 3.2 dia.<br>14°<br>7 3 16 3<br>Four, R1.7<br>4.5<br>1.5 12 5 10.3 10 max. 7 3.4<br>Material: Stainless steel (SUS304) 4 1<br>— er 4.5 cco<br>3.4 1<br>Material: Stainless steel (SUS304)<br>7.8<br>BS<br>**----- End of picture text -----**<br>


**12** ~~a~~ 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [505 x 564] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L144  E39-L148<br>25<br>R1.7 16 R1.7<br>Two, R17<br>Two, 50° 21 23 12 12 max. 9 3.4<br>2<br>Four, R1.6 3.4 2<br>14.2 3.5<br>Four, R1.6 22 Two, 3.2 dia.<br>9.5<br>16<br>7.3<br>38.5 25.4 Two, R25.4 4.3<br>1.5<br>1.5 3 3 9.1<br>7.3 4 27<br>35<br>Material: Stainless steel (SUS304) 5° Material: Stainless steel (SUS304)<br>E39-L149 E39-L150<br>E39-L151  5.5 20<br>14<br>4.5 Two, 3.5<br>52<br>13.6 45 Four, 4.5 dia. Polybutylene 5.4<br>terephthalate<br>35 22.7<br>Four, R3 6.8<br>42.5 24 19 40.5 Two, 3.5 dia.<br>10 dia.<br>Stainless steel<br>5.5 10.5 L (SUS 304)<br>Two, 6.5 dia. 8<br>4.5 1 21<br>34 32 Polybutylene 19<br>terephthalate<br>— ep 46 7<br>Length (mm)<br>Model L<br>E39-L150 65<br>E39-L151 165<br>—+ —<br>E39-L153  14<br>8<br>3.5<br>7<br>7<br>4 3.5<br>a? re<br>Two, R1.75 4-3<br>4 Eight, R1.75<br>a t Te<br>Four, 3.5<br>25.4<br>41<br>10<br>i 1.2 e<br>22<br>+ L_ ine<br>**----- End of picture text -----**<br>


## **Contact Mounting Plate** 

(Unit: mm) 

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 

**==> picture [316 x 74] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-L60<br>(33) 11.75<br>6.5 6.5<br>20 2.5<br>| — “it<br>11.75 3.4 dia.<br>5 2.5<br>3.4 dia.<br>Material: PBT (polybutylene terephthalate) 2’) a 5<br>**----- End of picture text -----**<br>


**13** ~~a~~ 

## **E39-L/F39-L/E39-S/E39-R** 

**==> picture [507 x 502] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reflector dimensions (Unit: mm)<br>Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.<br>E39-R1 E39-R2 E39-R9<br>E39-R1S 30.9 × 30.9<br>E39-R1K *<br>42.3<br>r a nean] sertawntri | S e snbunaPed ae (21)4 8<br>15 3.5<br>sae Material,  SET saad Material,  L 25 | Two, 3.6 dia. 5.5<br>E sete ned reflective surface: acrylicRear surface: ABS aa reflective surface: acrylic Material,  35.4 8<br>Rear surface: ABS reflective surface: acrylic<br>Rear surface: ABS<br>40.3 80.8<br>Two, 3.5 dia. 34 7.5 Four, 3.5 dia. 74.5 7.5 E39-R10<br>ee 7 7 ee 7 _ 4 7 × 4 7<br>2] io >| ee<br>8<br>59.9 52<br>59.9 52 61.4<br>(30.4)<br>8<br>1.6 mie 2.7 rail Irs ie 5 r o ] 10<br>* E39-R1K onlyCoating on reflective surface 1.6 _———— 76.5 "| 34 _ 2.7 | Material, reflective surface: acrylic | _——_CE 51.64030 | Two, 4 dia. 8 3.55.5<br>Rear surface: ABS<br>E39-R3 E39-R4 13.7 E39-R6<br>4<br>4.9<br>beep e  s Sea o ed 4 “alse|| 3 2 | 9.7 > ee<br>23 19 Material,<br>4 reflective surface: acrylic<br>Rear surface: ABS<br>Material, reflective surface: acrylic 3.44.5 = 6 29 3.4 Material, reflective surface: acrylic 2 Two, 2.2 dia. 1.4 Sa)<br>Rear surface: ABS 7 t R20 T 14° 13.7 Rear surface: ABS<br>22.918.45 ( ee e = 20 0.2 i E39-R37-CA [ ~—___ 4034 —_ + 4.8<br>| 4 0.2 Mounting bracket Reflector | +<br>22.5 1 1 +| Adhesive tape side 9 r 1 8.73.7 13.7 Eight, R1 ( 1.1)<br>ra 19.3 | 16 Two, 3.2 dia. inl + 60 | 52 40 eT|<br>23 18.3 10.2 18.3 23<br>41.8 25.4 Two, M3 {| + 34.8 | 38 [4 R25.4 A 3.2 34 O i Two, 3.1 dia. ce Two, R1.55 Reflector: t0.5(adhesive tape side) 3.5<br>10.1 |DS 1.2 nd | lyeA e Stainless  | Material:Mounting plate: stainless steel (SUS301) mn MountingBracket: t 0.5 eae ~ 3.5<br>2.6 1.2 HE 10 Ly ° steel(SUS304) Reflective surface: acrylic<br>Note: The reflective plate and mounting plate (1) come as a set.<br>Reflectors only for E3T-SR4@.<br>**----- End of picture text -----**<br>


## **Reflector dimensions** 

## **Retroreflector for E3ZM-B E39-RP1** 

**==> picture [166 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
8.5<br>44<br>3<br>0.2<br>80 72 63.6<br>Reflector<br>Two, 3.5 dia.<br>**----- End of picture text -----**<br>


**14** 

**E39-L/F39-L/E39-S/E39-R** 

**==> picture [508 x 407] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-RS1 E39-RS3<br>E39-RS1-CA * E39-RS3-CA *<br>35 0.5<br>10<br>80 0.5<br>Adhesive<br>Four, R1 tape side<br>Material: Acrylics<br>Ee ReeAe a<br>E39-RS2<br>E39-RS2-CA * PORee.Oe ae<br>= RyDO— 70<br>40 0.5<br>Fe Le<br>eR _ | ry<br>eee Se<br>preioee ees Ley<br>35<br>Adhesive<br>Material: Acrylics Four, R1 tape side<br>Adhesive<br>Material: Acrylics Four, R1 tape side<br>E39-R12/R14 E39-R13<br>5.5<br>4<br>24<br>2.9 45 ee  aH<br>23 1.6 7<br>a) a ee tI<br>15 6<br>7 12<br>30 ul | BA 23 a e<br>17.2<br>1 \<br>perer| |)<br>37<br>E39-RS4 E39-RS5<br>0.4<br>| 0.4  T 108  t<br>195<br>———— 7 y<br>22  46<br>Lo |<br>Adhesive<br>tape side Adhesive<br>tape side<br>* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@.<br>Sensitivity Adjuster Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.(Unit: mm)<br>Four, R1<br>R3.7<br>Two, 3.4 dia.<br>Two, 3.4 dia.<br>Four, R3<br>Four, R1.4 Four, R2<br>R3.2<br>R3.7<br>R32.<br>**----- End of picture text -----**<br>


**==> picture [263 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-G1 4<br>wy 9.3 dia.13 dia.<br>Ee)or at——- i | [[Le]] —ay 0 cIz——Ef<br>Material: Polycarbonate 8 aS)<br>**----- End of picture text -----**<br>


## **Sensitivity Adjustment Driver** 

(Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 

**==> picture [194 x 84] intentionally omitted <==**

**----- Start of picture text -----**<br>
E39-G2 8 dia.<br>0.8<br>1<br>(12.6)<br>7 dia.<br>Material: Polycarbonate<br>**----- End of picture text -----**<br>


**15** 

**E39-L/F39-L/E39-S/E39-R** 

## **Lens Unit** 

(Unit: mm) 

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 

## **E39-F1V** 

0.5-dia. hole 8.9 4 dia. M2.6 × 0.45 6 Effective depth: 3.8 Countersunk with straight edge, depth: 0.9 

## **Connection Sockets** 

(Unit: mm) 

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. 

**==> picture [512 x 298] intentionally omitted <==**

**----- Start of picture text -----**<br>
Front Connection SocketPF113A Eleven, M3.5 Sems screw × 722 7 4 Terminal arrangement/Inter-nal connections (top view)<br>Mounting Holes<br>2 1 11 10 Two, M4 or 4.5 dia.<br>52 max. 35.4 3 9<br>34±0.2<br>4 4 Note: Rail mounting also possible.<br>5 34 4 3.5 2 5 6 7 8<br>43 max. 31 max.<br>Front Connection Socket Terminal arrangement/Inter- Mounting Holes<br>PYF08A Two, 4.2 × 5 mounting holes 6 Eight, M3 Sems screw× 8 3.4 nal connections (top view) Two, M3 or M4or 4.5 dia.<br>4 1<br>8 5<br>72 max. 35.4 59 [±][0.3]<br>12 9<br>4 14 13<br>23 max. 6 15±0.2<br>16.5 Note: Rail mounting also possible.<br>30 max.<br>Front Connection Socket Terminal arrangement/Internal  PCB Cutout Dimensions<br>PY08 connections (bottom view) Mounting Holes 13.2<br>Eight, 3 × 1.2 ellipse hole 4.1<br>1 4 5.8<br>25.5 max.29.5 max. 5 8 25.8 [±][0.2] 6.35 12.65<br>9 12 6.4<br>2.7 7.7 2.6 13 14 21.4         0 [+0.2] 4.2 Eight, 1.3 dia. holes<br>24 max.<br>20 max.<br>**----- End of picture text -----**<br>


**16** 

## **Terms and Conditions of Sale** 

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron objects to any terms or conditions proposed in Buyer’s purchase order or other documents which are inconsistent with, or in addition to, these Terms. 

2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron’s payment terms and (ii) Buyer has no past due amounts. 

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 

5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 

7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 

8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 

10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in “break down” situations. 

b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; 

   - c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; 

   - d. Delivery and shipping dates are estimates only; and 

   - e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 

12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 

- ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http:// www.omron247.com or contact your Omron representative for published information. 

- 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 

- 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products.   Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 

- 16. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 

- 17. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. 

- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles).   (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. 

## **Certain Precautions on S ecifications and Use p** 

1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. 

   - (ii) Use in consumer products or any use in significant quantities. 

   - (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. 

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 

- ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 

- 2. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. 

- 3. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. 

4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. 

5. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 

**==> picture [183 x 54] intentionally omitted <==**

## **OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS** 

Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com 

**OMRON CANADA, INC. • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE** Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com Cono Sur • 54.11.4783.5300 **OMRON ELECTRONICS DE MEXICO • HEAD OFFICE OMRON CHILE • SALES OFFICE** México DF • 52.55.59.01.43.00 • 001.800.556.6766 • mela@omron.com Santiago • 56.9.9917.3920 **OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES** Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com 54.11.4783.5300 **OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE** São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br 

**OMRON EUROpE B.V. •** Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 • www.industrial.omron.eu 

Cat. No. CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1 03/12           Note: Specifications are subject to change.          © 2012 Omron Electronics LLC          Printed in U.S.A.