E2S-W14 1M

## **Super-compact Proximity Sensor E2S** CSM_E2S_DS_E_9_4 **Advanced Performance and Wide** ~~a~~ **Range of Selections in a Supercompact Size** 

- Only 5.5 × 5.5 mm with a built-in Amplifier. 

- Maximum sensing distance: 2.5 mm. Stable detection even with workpiece fluctuations. 

- Response frequency: 1 kHz. 

- Low current consumption. 

For the most recent information on models that have been certified for safety standards, refer to your OMRON website. 

Be sure to read _Safety Precautions_ on page 6. 

## **Ordering Information** 

|**Sensors[Refer to****_Dimensions_ on page 7.]**|
|---|
|**DC 2-Wire Models**|
|*1. Models with a different frequency are also available to prevent mutual interference. The model numbers are E2S-@@@B (e.g., E2S-W11B).<br>*2. Models are also available with robotics (bend resistant) cables. Add “-R” to the model number.(e.g., E2S-W11-R 1M)<br>**DC 3-Wire Models**<br>*1. Models with a different frequency are also available to prevent mutual interference. The model numbers are E2S-@@@B (e.g., E2S-W13B).<br>**Appearance**<br>**Sensing surface**<br>**Sensing distance**<br>**Model**<br>**Operation mode**<br>**NO**<br>**NC**<br>Top<br>**E2S-W11 1M *1 *2**<br>**E2S-W12 1M**<br>Front<br>**E2S-Q11 1M *1 *2**<br>**E2S-Q12 1M**<br>Top<br>**E2S-W21 1M *1 *2**<br>**E2S-W22 1M *2**<br>Front<br>**E2S-Q21 1M *1 *2**<br>**E2S-Q22 1M *2**<br>Unshielded<br>1.6 mm<br>2.5 mm<br>**Appearance**<br>**Sensing surface**<br>**Sensing distance**<br>**Output**<br>**configuration**<br>**Model**<br>**Operation mode**<br>**NO**<br>**NC**<br>Top<br>NPN<br>**E2S-W13 1M *1 *2**<br>**E2S-W14 1M**<br>Front<br>**E2S-Q13 1M *1 *2**<br>**E2S-Q14 1M**<br>Top<br>**E2S-W23 1M *1 *2**<br>**E2S-W24 1M *2**<br>Front<br>**E2S-Q23 1M *1 *2**<br>**E2S-Q24 1M *2**<br>Top<br>PNP<br>**E2S-W15 1M *1**<br>**E2S-W16 1M**<br>Front<br>**E2S-Q15 1M *1**<br>**E2S-Q16 1M**<br>Top<br>**E2S-W25 1M *1**<br>**E2S-W26 1M**<br>Front<br>**E2S-Q25 1M *1**<br>**E2S-Q26 1M**<br>Unshielded<br>1.6 mm<br>2.5 mm<br>1.6 mm<br>2.5 mm<br>~~2Ee~~|
|*2. Models are also available with robotics (bend resistant) cables. Add “-R” to the model number.(e.g., E2S-W13-R 1M)|



**1** 

**E2S** 

## **Accessories (Order Separately)** 

**Mounting Brackets Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. [Refer to** _**Dimensions**_ **on page 7.]** 

|**Appearance**|**Model**|**Quantity**|**Remarks**|
|---|---|---|---|
||**Y92E-C1R6**|1|Provided with E2S-@1@@.<br>(fixed with one screw)|
||**Y92E-C2R5**||Provided with E2S-@2@@.<br>(fixed with one screw)|
||**Y92E-D1R6**||For E2S-@1@@<br>(fixed with two screws)|
||**Y92E-D2R5**||For E2S-@2@@<br>(fixed with two screws)|



## **Model Number Legend** 

## - - E2S @ @ @ @ @ 

(1) (2) (3) (4) (5) (6) 

(1) Compact (2) Sensing Direction (3) Size and Sensing Distance (4) Output (5) Different Frequency (6) Robotics (bend resistant) Square W: Top surface detection (Standard Sensing Object) 1: DC 2-wire NO Blank: Standard cables Series Q: Front surface detection 1: 5.5 × 5.5 mm, 1.6 mm (iron)× 5.5 mm, 1.6 mm (iron) 5.5 mm, 1.6 mm (iron) 2: DC 2-wire NC B: Different frequency Blank: Standard 

1: 5.5 × 5.5 mm, 1.6 mm (iron)× 5.5 mm, 1.6 mm (iron) 5.5 mm, 1.6 mm (iron) 2: DC 2-wire NC B: Different frequency Blank: Standard 2: 8 × 8 mm, 2.5 mm (iron) 3: DC 3-wire NPN NO R: Robotics (bend 4: DC 3-wire NPN NC resistant) cables 

5: DC 3-wire PNP NO 6: DC 3-wire PNP NC 

**==> picture [539 x 34] intentionally omitted <==**

**2** 

**E2S** 

## **Ratings and Specifications** 

## **DC 2-Wire Models** 

|**Model**|**Model**|**E2S-W11**<br>**E2S-W12**|**E2S-Q11**<br>**E2S-Q12**|**E2S-W21**<br>**E2S-W22**|**E2S-Q21**<br>**E2S-Q22**|
|---|---|---|---|---|---|
|**Item**||||||
|**Sensing surface**||Top|Front|Top|Front|
|**Sensing distance**||1.6 mm±15%||2.5 mm±15%||
|**Set distance**||0 to 1.2 mm||0 to 1.9 mm||
|**Differential travel**||10% max. of sensing distance||||
|**Detectable object**||Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to_Engineering Data_on page 4.)||||
|**Standard sensing**<br>**object**||Iron, 12×12×1 mm||Iron, 15×15×1 mm||
|**Response frequency***||1 kHz min.||||
|**Power supply voltage**<br>**(operating voltage**<br>**range)**||12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.||||
|**Leakage current**||0.8 mA max.||||
|**Control**<br>**output**|**Load**<br>**current**|3 to 50 mA max.||||
||**Residual**<br>**voltage**|3 V max. (under load current of 50 mA with cable length of 1 m)||||
|**Indicators**||@@1 Models: Operation indicator (red), Setting indicator (green)<br>@@2 Models: Operation indicator (red)||||
|**Operation mode**<br>**(with sensing object**<br>**approaching)**||@@1 Models: NO<br>@@2 Models: NC<br>Refer to the timing charts under_I/O Circuit Diagrams_on page 5 for details.||||



* The response frequency is an average value. 

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 

## **DC 3-Wire Models** 

|**Model**|**Model**|**E2S-W13**<br>**E2S-W14**|**E2S-Q13**<br>**E2S-Q14**|**E2S-W23**<br>**E2S-W24**|**E2S-Q23**<br>**E2S-Q24**|**E2S-W15**<br>**E2S-W16**|**E2S-Q15**<br>**E2S-Q16**|**E2S-W25**<br>**E2S-W26**|**E2S-Q25**<br>**E2S-Q26**|
|---|---|---|---|---|---|---|---|---|---|
|**Item**||||||||||
|**Sensing surface**||Top|Front|Top|Front|Top|Front|Top|Front|
|**Sensing distance**||1.6 mm±15%||2.5 mm±15%||1.6 mm±15%||2.5 mm±15%||
|**Set distance**||0 to 1.2 mm||0 to 1.9 mm||0 to 1.2 mm||0 to 1.9 mm||
|**Differential travel**||10% max. of sensing distance||||||||
|**Detectable object**||Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to_Engineering Data_on page 4.)||||||||
|**Standard sensing**<br>**object**||Iron, 12×12×1 mm||Iron, 15×15×1 mm||Iron, 12×12×1 mm||Iron, 15×15×1 mm||
|**Response frequency***||1 kHz min.||||||||
|**Power supply voltage**<br>**(operating voltage**<br>**range)**||12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.||||||||
|**Current consumption**||13 mA max. at 24 VDC (no-load)||||||||
|**Control**<br>**output**|**Load**<br>**current**|NPN open-collector output, 50 mA max. (30 VDC max.)||||PNP open-collector output, 50 mA max. (30 VDC max.)||||
||**Residual**<br>**voltage**|1.0 V max. (under load current of 50 mA with cable length of 1 m)||||||||
|**Indicators**||Operation indicator (orange)||||||||
|**Operation mode**<br>**(with sensing object**<br>**approaching)**||@@3 Models: NO<br>@@4 Models: NC<br>Refer to the timing charts under_I/O Circuit Diagrams_on<br>page 5 for details.||||@@5 Models: NO<br>@@6 Models: NC<br>Refer to the timing charts under_I/O Circuit Diagrams_on<br>page 5 for details.||||



* The response frequency is an average value. 

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 

**==> picture [539 x 34] intentionally omitted <==**

**3** 

**E2S** 

## **Specifications** 

|**Item**<br>**Model**|**Item**<br>**Model**|**E2S-**@@@|
|---|---|---|
|**Protection circuits**||Reverse polarity protection, Surge suppressor|
|**Ambient temperature**<br>**range**||Operating:−25 to 70°C (with no icing or condensation), Storage:−40 to 85°C (with no icing or condensation)|
|**Ambient humidity**<br>**range**||Operating: 35% to 90% (with no condensation), Storage: 35% to 95% (with no condensation)|
|**Temperature influence**||±15% max. of sensing distance at 23°C in the temperature range of−25 to 70°C|
|**Voltage influence**||±2.5% max. of sensing distance at rated voltage in rated voltage±10% range|
|**Insulation resistance**||50 MΩmin. (at 500 VDC) between current-carrying parts and case|
|**Dielectric strength**||1,000 VAC for 1 min between current-carrying parts and case|
|**Vibration resistance**||Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions|
|**Shock resistance**||Destruction: 500 m/s23 times each in X, Y, and Z directions|
|**Degree of protection**||IEC 60529 IP67|
|**Connection method**||Pre-wired Models (Standard cable length: 1 m)|
|**Weight (packed state)**||Approx. 10 g|
|**Materials**|**Case**|Polyarylate resin|
|**Accessories**||Mounting Brackets|



## **Engineering Data (Reference Value)** 

## **Sensing Area** 

## **E2S-W1** @ **/-W2** @ **E2S-Q1** @ **/-Q2** @ 

**==> picture [329 x 172] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 4<br>Y Y<br>X<br>X<br>3 3<br>E2S-W2@<br>E2S-Q2@<br>2 2<br>E2S-W1@<br>E2S-Q1@<br>1 1<br>0 0<br>−4 −3 −2 −1 0 1 2 3 4 −4 −3 −2 −1 0 1 2 3 4<br>E 2S-W1@ Sensing Head Distance Y  E 2S-Q1@ Sensing Head Distance Y<br>(mm) (mm)<br>E2S-W2@ Sensing Head E 2S-Q2@ Sensing Head<br>Distance X (mm) Distance X (mm)<br>**----- End of picture text -----**<br>


## **Influence of Sensing Object Size and Material** 

## **E2S-W1** @ **/-Q1** @ **E2S-W2** @ **/-Q2** @ 

**==> picture [320 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 4<br>d ´<br> d<br>Iron<br>X<br>1.5 3<br>Stainless steel (SUS304) Iron<br>Stainless steel (SUS304)<br>1 Brass 2<br>Brass<br>Copper<br>0.5 d   d´ t = 1 mm Aluminum 1 Copper<br>Aluminum<br>X<br>0 10 20 30 40 50 0 10 20 30 40 50 60<br>Side length of sensing object: d (mm) Side length of sensing object: d (mm)<br>Distance X (mm) Distance X (mm)<br>**----- End of picture text -----**<br>


**==> picture [539 x 34] intentionally omitted <==**

**4** 

**E2S** 

## **I/O Circuit Diagrams** 

## **DC 2-Wire Models** 

|**Operation**<br>**mode**|**Model**|||||||**Timing chart**|**Timing chart**|**Timing chart**|||**Output circuit**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|NO|E2S-W11<br>E2S-W21<br>E2S-Q11<br>E2S-Q21|||||||0<br>0<br>Stable sensing<br>area<br>Set position<br>Proximity Sensor<br>ON<br>OFF<br>ON<br>OFF<br>ON<br>OFF<br>Setting indicator (green)<br>Operation indicator (red)<br>Control output|||0 V<br>+V<br>Load<br>Brown<br>Blue<br>Proximity<br>Sensor<br>main<br>circuit<br>Note: The load can be connected to either<br>the +V or 0 V side.|||
|||||Non-sensing<br>area<br>Unst<br>sen<br>|||able<br>sing<br>area|||||||
|||||Sensing<br>object||||||||||
|||||||||||||||
|||||||||||||||
|||||10<br>(%)<br>Rated<br>sensing<br>distance|||8<br>0|||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|NC|E2S-W12<br>E2S-W22<br>E2S-Q12<br>E2S-Q22||<br>|||||0<br>Sensing area<br>Proximity Sensor<br>ON<br>OFF<br>ON<br>OFF<br>Operation indicator (red)<br>Control output||||||
|||||Non-sensing area||||||||||
|||||Sensing<br>object||||||||||
|||||1<br>(%)<br>Rated<br>sensing<br>distance|||00|||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|**DC 3-Wire Models**||||||||||||||
|**Operation**<br>**mode**|**Output con-**<br>**figuration**|**Model**||||||**Timing chart**||||**Output circuit**||
|NO|NPN|E2S-W13<br>E2S-W23<br>E2S-Q13<br>E2S-Q23|||||Present<br>Not present<br>ON<br>OFF<br>ON<br>OFF<br>Sensing object<br>Operation indicator<br>(orange)<br>Output transistor<br>(load)||||Proxim<br>Senso<br>main<br>circui<br>* Load c|0 V<br>+V<br>*<br>Load<br>Brown<br>Black<br>Output<br>Blue<br>ity<br>r<br> <br>t<br>urrent: 50 mA max.||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|||||||||||||||
|NC||E2S-W14<br>E2S-W24<br>E2S-Q14<br>E2S-Q24|||||Output transistor<br>(load)<br>Present<br>Not present<br>ON<br>OFF<br>ON<br>OFF<br>Sensing object<br>Operation indicator<br>(orange)|||||||
||||||||||<br>|||||
|||||||||||||||
||||||||||<br>|||||
||||||||||<br>|||||
||||||||||<br>|||||
|||||||||||||||
|||||||||||||||
|NO|PNP|E2S-W15<br>E2S-W25<br>E2S-Q15<br>E2S-Q25|||||Presen<br>Not presen<br>ON<br>OF<br>ON<br>OF<br>Output transistor<br>(load)<br>Sensing object<br>Operation indicator<br>(orange)||||Proxim<br>Senso<br>main<br>circui<br>* Load c|0 V<br>+V<br>*<br>Load<br>Brown<br>Black<br>Blue<br>ity<br>r<br> <br>t<br>urrent: 50 mA max.||
||||||||||t<br>t<br> <br>F<br> <br>F|||||
|||||||||||||||
|NC||E2S-W16<br>E2S-W26<br>E2S-Q16<br>E2S-Q26|||||Output transistor<br>(load)<br>Presen<br>Not presen<br>O<br>OF<br>O<br>OF<br>Sensing object<br>Operation indicator<br>(orange)||t<br>t<br>N<br>F<br>N<br>F|||||
|||||||||||||||



**==> picture [539 x 34] intentionally omitted <==**

**5** 

**E2S** 

## **Safety Precautions** 

## **Refer to** _**Warranty and Limitations of Liability**_ **.** 

## **WARNING** 

**This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes.** 

## **Precautions for Correct Use** 

Do not use this product under ambient conditions that exceed the ratings. 

## � **Design** 

## **Influence of Surrounding Metal** 

- When mounting the Sensor within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these distances may cause deterioration in the performance of the Sensor. 

- Models with Top Sensing Surface 

**==> picture [190 x 136] intentionally omitted <==**

**----- Start of picture text -----**<br>
Metal not  Metal exceeding<br>exceeding height  height of Sensor<br>of Sensor surface surface<br>A Sensing surface Sensing<br>surface B<br>Proximity  C C<br>Sensor Proximity<br>Sensor<br>(Unit: mm)<br>Model Distance A B C<br>E2S-W1 @ 8 2<br>0<br>E2S-W2 @ 15 10<br>**----- End of picture text -----**<br>


## **Mutual Interference** 

When installing Sensors face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. 

- Models with Top • Models with Front Sensing Surface Sensing Surface 

**==> picture [236 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
A B B<br>A<br>**----- End of picture text -----**<br>


## (Unit: mm) 

|**Model**<br>**Distance**|**A**|**B**|
|---|---|---|
|**E2S-W(Q)1**@|50 (40)*1|20 (5.5)*1,*2|
|**E2S-W(Q)2**@|75 (50)*1|25 (8)*1,*2|



- *1. Values in parentheses apply to Sensors operating at different frequencies. 

- *2. Mutual interference will not occur for close-proximity mounting if models with different frequencies are used together. 

## � **Mounting** 

## **Tightening Torque** 

For the E2S-W(Q)2 @ , the maximum tightening torque that should be applied to the mounting screws is 0.7 N·m. 

- Models with Front Sensing Surface 

**==> picture [168 x 59] intentionally omitted <==**

**----- Start of picture text -----**<br>
A B<br>B<br>C<br>**----- End of picture text -----**<br>


(Unit: mm) 

|**Model**<br>**Distance**|**A**|**B**|**C**|
|---|---|---|---|
|**E2S-Q1**@|8|3|2|
|**E2S-Q2**@|15|10|3|



## **Applicable e-CON Connector Models and Manufacturers** 

The companies and model number of e-CON connections that can be used with Sensor cables are listed in the following table. Confirm applicability when purchasing e-CON connectors for connection to Pre-wired Sensors. 

|**Model**|**Applicable e-CON Connector**|**Manufacturer**|
|---|---|---|
|E2S-W@3/4|XN2A-1470 Cable Plug Connector|OMRON|
|E2S-Q@3/4|||



**==> picture [539 x 34] intentionally omitted <==**

**6** 

**E2S** 

(Unit: mm) 

## **Dimensions** 

Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. 

## **Sensors** 

**==> picture [511 x 390] intentionally omitted <==**

**----- Start of picture text -----**<br>
E2S-W1 @ E2S-Q1 @<br>With Mounting Bracket Attached With Mounting Bracket Attached<br>Indicator*<br>2.6<br>Sensing surface 2 Sensing surface 2<br>5.5 6.4 2.3 5.5 6.4 2.3<br>8.4  [5.9] 8.4  [5.9]<br>2 2 5.9 2 2 5.9<br>2.9-dia. vinyl-insulated  R1.5 Indicator* R1.5<br>round cable with 2/3  22.3 2.9-dia. vinyl-insulated  22.3<br>conductors (Conductor  25.1 *E2S-W11@ Operation indicator (red),  round cable with 2/3  25.1 *E2S-Q11@ Operation indicator (red),<br>Insulator diameter: 0.9 mm), cross section: 0.14 mm [2] ,  Setting indicator (green) conductors (Conductor cross section: 0.14 mm [2] ,  Setting indicator (green)<br>Standard length: 1 m E2S-W12@ Operation  Insulator diameter: 0.9 mm),  E2S-Q12@ Operation indicator<br>indicator (red) Standard length: 1 m (red)<br>E2S-W13@ E2S-Q13@<br>E2S-W14@ E2S-Q14@ Operation indicator<br>E2S-W15@ Operation indicator (orange) E2S-Q15@ (orange)<br>1 1 9 E2S-W16@ 1 19 E2S-Q16@<br>E2S-W2 @ E2S-Q2 @<br>With Mounting Bracket Attached With Mounting Bracket Attached<br>Indicator*<br>2.5 Sensing surface 2.5 Sensing surface<br>1 0.8 1 0.8<br>8 2.3 8 8.9 2.3<br>2.9-dia. vinyl-insulated round cable with 2/3  3.1 dia. 1 0.8 1 7.47.8 2.9-dia. vinyl-insulated round cable 3.1 dia. 2.5 8.48<br>conductors (Conductor cross section: 0.14 mm [2] ,  with 2/3 conductors (Conductor cross section: 0.14 mm [2] , Insulator  Indicator*<br>Insulator diameter: 0.9 mm),  diameter: 0.9 mm), Standard length:<br>Standard length: 1 m 1 m<br> 3.1-dia. mounting hole<br>11.5 *E2S-W21@ Operation indicator (red), Setting indicator (green)  3.1-dia. mounting hole 1 4.54.1 3.6 *E2S-Q21@ Operation indicator (red), Setting indicator (green)<br>E2S-W22@ Operation indicator (red) E2S-Q22@ Operation indicator (red)<br>7.4<br>5.3 5.3<br>2 E2S-W23@ 2 E2S-Q23@<br>2 2<br>3 11.320 1 5.5 E2S-W24E2S-W25E2S-W26@@@ Operation indicator (orange) 3 1 1.323 1 8.5 E2S-Q24E2S-Q25E2S-Q26@@@ Operation indicator (orange)<br>**----- End of picture text -----**<br>


**==> picture [539 x 34] intentionally omitted <==**

**7** 

**E2S** 

## **Accessories (Order Separately)** 

**==> picture [511 x 438] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting Bracket 20.4 Mounting Bracket<br>Y92E-C1R6 17.2 Y92E-C2R5 2.5 10.8 2.5 0.4<br>1 5<br>1 4<br>25.3 11.3 8 5. 7 2 8.1 2.3<br>2.5 2 1.5 Two, R0.7<br>2.4 5.6 2.3 3.1 dia. 11.3 0.4<br>8.4  [5.9] 6.4 2<br>R1.5 R1.2 2<br>Material: Stainless steel  Two, R1.2 0.4 Material: Stainless steel<br>(SUS304) 1.1 1.3 3.5 (SUS304)<br>Mounting Hole Dimensions<br>*Provided with E2S- @ 1 @@ .  2.31.5 9.5 * Provided with E2S- @ 2 @@ .<br>2.4 dia.  M3 dia. (depth: 8 min.) 2.4 dia. (depth: 3 min.)<br>Mounting Hole Dimensions (depth: 2 min.)<br>3 11.5<br>M3 17.5<br>Mounting Bracket Mounting Bracket<br>Y92E-D1R6 Two, R1.6 3.2 2.4 dia. Four, R1 Y92E-D2R5 22.416<br>7 5 1 3.2 7.8 1 3.2<br>3 R1.6 3 2.4<br>17.45.6 * 0.9 Mounting Hole Dimensions Two, R1.6 3.2 8 *R1.6 Four, R1 Mounting Hole Dimensions<br>Material: Stainless steel (SUS304) 5.3 0.3 Two, M3 Material: Stainless steel (SUS304) 5 0.2 Two, M3<br>1 7<br>5 * 7 *<br>* Inside dimension * Inside dimension<br>Photoelectric Sensor  Photoelectric Sensor<br>Accessory is installed Accessory is installed<br>(Example of E2S-Q11) (Example of E2S-Q21)<br>3.2 3.2<br>12.3<br>4.2 dia.<br>E2S-Q11 E2S-Q21<br>2.6<br>5.5<br>8<br>12<br>**----- End of picture text -----**<br>


**==> picture [539 x 34] intentionally omitted <==**

**8** 

## Terms and Conditions Agreement 

## Read and understand this catalog. 

Please read and understand this catalog before purchasing the products.  Please consult your OMRON representative if you have any questions or comments. 

## Warranties. 

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. 

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE 

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. 

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 

See http://www.omron.com/global/ or contact your Omron representative for published information. 

## Limitation on Liability; Etc. 

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 

## Suitability of Use. 

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. 

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 

## Programmable Products. 

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. 

## Performance Data. 

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. 

## Change in Specifications. 

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. 

## Errors and Omissions. 

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 

**In the interest of product improvement, specifications are subject to change without notice.** 

## **OMRON Corporation** 

2023.2 

**Industrial Automation Company** 

**http://www.ia.omron.com/** 

(c)Copyright OMRON Corporation 2023 All Right Reserved.