E1SJA18-3.6864M TR

10/17/2019 

Ecliptek | E1S Series Crystal 

Log On |  714-433-1200  |  Email Customer Support 

||||||||Ecliptek is one of the ILSI America brands, which also include:|
|---|---|---|---|---|---|---|---|
|Home<br>Products|Quote Request|Sample Request||My Parts List||Site Map|Contact Us|
|||||||||
|**E1S Series Crystal**||||||||
|Quartz Crystal Resonator HC49/UP Short 2 Pad Surface Mount (SMD) 3.2mm Height Metal Resistance Weld Seal||Quartz Crystal Resonator HC49/UP Short 2 Pad Surface Mount (SMD) 3.2mm Height Metal Resistance Weld Seal||||||
||Oils|||**2011/65 +**<br>**2015/863**<br>**191 SVHC**<br>~~|~~<br>EURoHS<br>||REACH|||~~|~~|
|**Electrical Specifications**||||||Revision  H  11/09/2015||
|**Nominal Frequency**||3.579545MHz to 50.000MHz||||||
|||_Some frequencies within this range may not be available._|||_Some frequencies within this range may not be available._|||
|**Frequency Tolerance (at 25°C)**||±50ppm Maximum||||||
|||±30ppm Maximum||||||
|||±15ppm Maximum||||||
|||±10ppm Maximum||||||
|**Frequency Stability**||±100ppm Maximum||||||
|**(over Operating Temperature Range)**||±50ppm Maximum||||||
|||±30ppm Maximum||||||
|||±20ppm Maximum||||||
|||±15ppm Maximum||||||
|**Operating Temperature Range**||0°C to +70°C||||||
|||-20°C to +70°C||||||
|||-40°C to +85°C||||||
|||-40°C to +105°C||||||
|||-40°C to +125°C||||||
|||-55°C to +125°C||||||
|**Aging at 25°C**||±5ppm/year Maximum||||||
|**Load Capacitance**||10pF to 50pF Parallel Resonant|10pF to 50pF Parallel Resonant|||||
|||Series Resonant||||||
|**Shunt Capacitance**||7pF Maximum||||||
|**Equivalent Series Resistance**||Click to Open ESR Table||||||
|**Mode of Operation**||Fundamental or Third Overtone||||||
|**Crystal Cut**||AT or BT||||||
|**Drive Level**||1mWatt Maximum|1mWatt Maximum|||||
|**Storage Temperature Range**|**Storage Temperature Range**|-55°C to +125°C||||||
|**Insulation Resistance**||Measured at 100VDC||||||
|||500 Megaohms Minimum||||||



## **E1S Series Crystal** 

Quartz Crystal Resonator HC49/UP Short 2 Pad Surface Mount (SMD) 3.2mm Height Metal Resistance Weld Seal 

## **Electrical Specifications** 

www.ecliptek.com/crystals/E1S/ 

1/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Mechanical Dimensions** 

All Dimensions in Millimeters 

## **Marking Specifications** 

Line 1: **EXXXXXXM** E = Ecliptek Designator XXXXXX = Nominal Frequency (5 Digits + Decimal) M = Frequency Unit of Measure (MHz) 

www.ecliptek.com/crystals/E1S/ 

2/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Environmental and Mechanical Specifications** 

**ESD Susceptibility** MIL-STD-883, Method 3015, Class 1, HBM: 1500V **Fine Leak Test** MIL-STD-883, Method 1014, Condition A **Flammability** UL94-V0 **Gross Leak Test** MIL-STD-883, Method 1014, Condition C **Mechanical Shock** MIL-STD-202, Method 213, Condition C **Moisture Resistance** MIL-STD-883, Method 1004 **Moisture Sensitivity** J-STD-020, MSL1 **Resistance to Soldering Heat** MIL-STD-202, Method 210, Condition K **Resistance to Solvents** MIL-STD-202, Method 215 **Solderability** MIL-STD-883, Method 2003 **Temperature Cycling** MIL-STD-883, Method 1010, Condition B **Vibration** MIL-STD-883, Method 2007, Condition A 

www.ecliptek.com/crystals/E1S/ 

3/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Tape & Reel Dimensions** 

1000 pieces per reel Compliant to EIA-481 All Dimensions in Millimeters 

www.ecliptek.com/crystals/E1S/ 

4/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Fundamental Mode AT Cut** 

|**Fundamental Mode AT Cut**|**Fundamental Mode AT Cut**|
|---|---|
|**_Nominal Frequency Range in MHz_**<br>**_Maximum ESR in Ohms_**||
|3.579545 to 4.999999|200|
|5.000000 to 5.999999|150|
|6.000000 to 7.999999|120|
|8.000000 to 8.999999|90|
|9.000000 to 9.999999|80|
|10.000000 to 14.999999|70|
|15.000000 to 15.999999|60|
|16.000000 to 23.999999|50|
|24.000000 to 30.000000|40|



## **Fundamental Mode BT Cut** 

|**Fundamental Mode BT Cut**||
|---|---|
|**_Nominal Frequency Range in MHz_**|**_Maximum ESR in Ohms_**|
|24.000000 to 40.000000|40|



## **Third Overtone Mode AT Cut** 

|**Third Overtone Mode AT Cut**||
|---|---|
|**_Nominal Frequency Range in MHz_**|**_Maximum ESR in Ohms_**|
|24.576000 to 29.999999|150|
|30.000000 to 50.000000|100|



www.ecliptek.com/crystals/E1S/ 

5/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

**Recommended Solder Pad Dimensions** 

Tolerances = ±0.1 All Dimensions in Millimeters 

www.ecliptek.com/crystals/E1S/ 

6/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Solder Reflow Profile** 

## **High Temperature Infrared/Convection** 

**Note:** Temperatures shown are applied to body of device. **TS MAX to TL (Ramp-up Rate)** 3°C/second Maximum **Preheat - Temperature Minimum (TS MIN)** 150°C **- Temperature Typical (TS TYP)** 175°C **- Temperature Maximum (TS MAX)** 200°C **- Time (tS)** 60 - 180 Seconds **Ramp-up Rate (TL to TP)** 3°C/second Maximum **Time Maintained Above: - Temperature (TL)** 217°C **- Time (tL)** 60 - 150 Seconds **Peak Temperature (TP)** 260°C Maximum for 10 Seconds Maximum **Target Peak Temperature (TP Target)** 250°C +0/-5°C **Time within 5°C of actual peak (tP)** 20 - 40 seconds **Ramp-down Rate** 6°C/second Maximum **Time 25°C to Peak Temperature (t)** 8 minutes Maximum **Moisture Sensitivity Level** Level 1 

www.ecliptek.com/crystals/E1S/ 

7/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Low Temperature Infrared/Convection** 

**Note:** Temperatures shown are applied to body of device. 

**TS MAX to TL (Ramp-up Rate)** 5°C/second Maximum **Preheat - Temperature Minimum (TS MIN)** N/A **- Temperature Typical (TS TYP)** 150°C **- Temperature Maximum (TS MAX)** N/A **- Time (tS)** 60 - 120 Seconds **Ramp-up Rate (TL to TP)** 5°C/second Maximum **Time Maintained Above: - Temperature (TL)** 150°C **- Time (tL)** 200 Seconds Maximum **Peak Temperature (TP)** 240°C Maximum **Target Peak Temperature (TP Target)** 240°C Maximum 2 Times / 230°C Maximum 1 Time **Time within 5°C of actual peak (tP)** 10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time **Ramp-down Rate** 5°C/second Maximum **Time 25°C to Peak Temperature (t)** N/A **Moisture Sensitivity Level** Level 1 

## **High Temperature Manual Soldering** 

**Note:** Temperatures listed are applied to body of device. 260°C Maximum for 5 seconds Maximum, 2 times Maximum. 

## **Low Temperature Manual Soldering** 

**Note:** Temperatures listed are applied to body of device. 185°C Maximum for 10 seconds Maximum, 2 times Maximum. 

www.ecliptek.com/crystals/E1S/ 

8/9 

10/17/2019 

Ecliptek | E1S Series Crystal 

## **Part Number Constructor** 

**==> picture [525 x 707] intentionally omitted <==**

**----- Start of picture text -----**<br>
Build a Part Number On the next page<br>Select the parameters that meet your requirements and then Part Number specific documents,<br>click the Next button below resources, and tools<br>Frequency (MHz)  Part Number Specific<br>3.579545 to 50.000 Data Sheet<br>Some frequencies within this range may<br>not be available<br>Compliance Docs<br>(REACH, RoHS, CMRT)<br>Frequency Tolerance/Stability<br>±50ppm at 25°C, ±100ppm over 0°C to +70°C Automated Quick Quote<br>Mode of Operation IPC-1752<br>AT-Cut Fundamental<br>Check Stock<br>Load Capacitance (pF)<br>18 (10 to 50 or leave blank for Series Resonant)<br>My Parts List   ©<br>Packaging Options<br>Plus more<br>Tape & Reel<br>Part Numbering Guideg Guide Guide<br>Els A A 18 -20.000M TR<br>Series ————______] — Drackaging ‘Options<br>Quartz Crystal Resonator HCA8/UP Short 2 Pad Blank = Bulk<br>Surface Mount (SMB) 3.2mm Height Metal Resistance TR = Tape & Reel<br>Weld Seal Nominal Frequency<br>FrequencyA= 450pom alTolerance/Stability 28°C, +100ppm over OC to +70°C Lead Gapacitanvg<br>B= 250ppm at 25°C, +100ppm over -20°C to +70°C ean<br>@ = 450ppm at 25°C. +100ppm over 40°C to +25°C xx = 10pF Parallel Resonant to 50pF Parallel<br>D= 490m al 25°C, #50p9m over °C to +70°C esaner<br>E = 230pom at 26°C, +50ppm over -20°C to +70°C Mode of Operation<br>F = 4309pm al 25°C, +50pam over 40°C to +85°C A> AT-Cut Fundamental<br>G=215ppm at 25°C, 30pm over O'C to +70°C B = AT-Cut Third Gvertone<br>H=+415pom al 25°C, 430pam over -20°C te +70°C © = BT-Cut Fundamental<br>J=414ppm at 25°C, +30ppm over-40°C to +85°C<br>K = 215ppm at 25°C, 20ppm over 0°C te +70°C<br>L=215pom at 26°C, 220ppm over -20°C ta +70°C<br>M=215pom al 25°C. 220pom over 40°C ta +85°C<br>N= +10ppm at 25°C, +18pom over O°C to +70"<br>P= 210ppm at 26°C, 415ppm over -20°C to 70°C<br>@ = 2+10ppm at 25°C, +15p9pm over -40°C to +85°C<br>R=415pom at 25°C, #30ppm aver 40°C to +705°C<br>S = 230pom at 25°C, +50ppm over -40°C to +106°C<br>T=450ppm at 25°C, +100opm over -40°C to +105°C<br>Vo= £30pom at 25°C, +50ppm over-d0°C ip +128°C<br>\W= #50pom at 25°C, 4100ppm over 40°C to +425°C.<br>Y= 230pom ai 25°C, +50ppm over -55°C to +125°C<br>2= 450opm al 25°C, 4100ppm over 58°C to +125°C<br>TOOLS PRODUCT ECLIPTEK TERMS<br>Quote Request Crystals Authorized Distributors Privacy Policy<br>Sample Request Oscillators Authorized Reps Terms of Sale<br>SmartSearch Part Search Contact Legal<br>Compliance Documents REACH Resources About<br>Chipset Cross Reference RoHS Resources News<br>Competitor Cross Reference End of Life Our Quality<br>ISO9001<br>Feedback<br>—_—__  —_- O— RON™N“N-WVYrAR0TrwT@§”TV(“_\-’VVY—e208?2°0—0——000 NN ———$—$—— ©2018 Ecliptek, LLC<br>**----- End of picture text -----**<br>


## **Part Numbering Guideg Guide Guide** 

www.ecliptek.com/crystals/E1S/ 

9/9