DW-AS-703-M12

**INDUCTIVE SENSOR EXTREME** 

## **DW-Ax-70x-M12** 

**HOUSING OPERATING DISTANCE MOUNTING M12 6 mm Embeddable** 

- ü One-piece housing in ü Extremely robust stainless steel V2A ü Water resistant 

- ü Long operating distance ü IP68/IP69K ü Factor 1 on Fe and Al ü IO-Link v1.1 

**DW-AS-70x-M12** 

**DW-AD-70x-M12** 

**DW-AV-70x-M12-274** 

|**DETECTION DATA**|**DETECTION DATA**|**INTERFACE**|**INTERFACE**|
|---|---|---|---|
|Rated operatingdistance(Sn)|6 mm|Indicator LED, yellow|Sensingstate(0≤s≤0.8 Sr)|
|Assured operatingdistance(Sa)|≤ (0.81 x Sn)mm|Indicator LED, yellow,blinking|Sensingstate(0.8 Sr< s≤Sr)|
|Repeat accuracy|≤0.2 mm|IO-Link|ü|
|Hysteresis|3% Sr ≤Hyst≤15% Sr|MTTF(@40°C)|1017y|
|Temperature drift|≤10% Sr|||
|Standard target|18 x 18 x 1 mm3,FE360|||



Note: 0.9Sn ≤ Sr ≤ 1.1Sn. 

|**ELECTRICAL DATA**|**ELECTRICAL DATA**|**MECHANICAL DATA**|**MECHANICAL DATA**|
|---|---|---|---|
|Supplyvoltage range(UB)|10...30 VDC|Mounting|Embeddable|
|Residual ripple|≤20% UB|Housingmaterial|V2A / 1.4305 / AISI 303|
|Output current|≤200 mA|Sensingface material|V2A / 1.4305 / AISI 303|
|Output voltage drop|≤2.0 VDC|Max tighteningtorque|20 Nm|
|Power consumption(no-load)|≤10 mA|Ambient operatingtemperature|-25...+85°C1|
|Residual current|≤0.1 mA|Enclosure rating|IP68 / IP69K|
|Switchingfrequency|≤600 Hz|Weight(cable/connector)|seepage 2|
|Short-circuitprotection|ü|Shock and vibration|IEC 60947-5-2|
|Voltage reversalprotection|ü|||
|Cable length max.|≤300 m|||



> 1Maximum temperature according to UL: 70 ° C. 

Note: all data measured according to IEC 60947-5-2 standard with UB= 20 … 30VDC, TA=23 ° C ± 5 ° C. 

**CONTRINEX AG** Industrial Electronics 

Route du Pâqui 3 – P.O. Box – CH 1720 Corminboeuf – Switzerland – **Tel:** +41 26 460 46 46 **Fax:** +41 26 460 46 40 – **Internet:** www.contrinex.com – **E-mail:** info@contrinex.com 

|**CORRECTION FACTORS FOR TARGET OF**|**CORRECTION FACTORS FOR TARGET OF**||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Steel FE 360<br>**1**|Copper|**0.85**||Aluminum||**1**|Brass||||**1.3**||Stainless Steel V2A 1/2 mm|**0.4 / 0.8**|
|**CORRECTION FACTORS FOR EMBEDDABLE MOUNTING IN SUPPORT OF**|||||||||||||||
|Steel FE 360|Aluminum<br>**0.7**|||**1.15**||Brass|||**1.05**||||Stainless Steel V2A|**0.8**|



Note: the operating distance of the sensor must be multiplied by the correction factor of the material. For example, the operating distance on Aluminum is Sn, Al = Sn x CFAl. In case of embeddable mounting, the distance is multiplied by the additional correction factor of the support, thus Sn, Al = Sn x CFAl x CFemb, Al. 

## **INSTALLATION CONDITIONS IO-LINK FUNCTIONALITIES** 

**==> picture [433 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
IO-Link version 1.1<br>SIO mode Supported<br>Process data 7-bit input<br>B ! | | ; BaudrateMinimum cycle time COM2 10.4 ms(38.4 kBaud)<br>ISDU Not supported<br>A : metal free zone a :       mm12 d : steel       mm0<br>rT pe<br>B : sensing face b :       mm50 sponding downloads.<br>C : support c :       mm18<br>**----- End of picture text -----**<br>


IODD files may be downloaded from www.contrinex.com/product-range/inductive-sensors/. Select the product name to display the product page with corresponding downloads. Alternatively, just click/scan the QR code on the left. 

Note: additional installation information can be found in the glossary of the Contrinex General Catalog. 

## **WIRING DIAGRAM** 

## **PIN ASSIGNMENT** 

**==> picture [47 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
3<br>4 2<br>1<br>M12<br>**----- End of picture text -----**<br>


## **AVAILABLE TYPES** 

|**Part number**|**Part reference**|**Polarity**|**Connection**|**Output on pin 2**|**Output on pin 4 / bk**|**Weight**|
|---|---|---|---|---|---|---|
|320-420-201|DW-AD-701-M12|NPN|PUR,2 m,3 wire|-|Normallyopen(NO)|89g|
|320-420-202|DW-AD-702-M12|NPN|PUR,2 m,3 wire|Normallyclose(NC)|-|89g|
|330-320-010|DW-AD-703-M12|PNP|PUR,2 m,3 wire|-|Normallyopen(NO)/ IO-Link|89g|
|320-420-204|DW-AD-704-M12|PNP|PUR,2 m,3 wire|Normallyclose(NC)|-|89g|
|320-420-206|DW-AS-701-M12|NPN|M12 4-pin|-|Normallyopen(NO)|25g|
|320-420-207|DW-AS-702-M12|NPN|M12 4-pin|Normallyclose(NC)|-|25g|
|330-320-011|DW-AS-703-M12|PNP|M12 4-pin|-|Normallyopen(NO)/ IO-Link|25g|
|320-420-209|DW-AS-704-M12|PNP|M12 4-pin|Normallyclose(NC)|-|25g|
|330-320-129|DW-AS-70A-M12|PNP|M12 4-pin|Normallyclose(NC)|Normallyopen(NO)/ IO-Link|25g|
|320-420-745|DW-AS-70B-M12|NPN|M12 4-pin|Normallyclose(NC)|Normallyopen(NO)|25g|
|330-320-190|DW-AS-703-M12-528 *|PNP|M12 4-pin|-|Normallyopen(NO)/ IO-Link|25g|
|320-420-407|DW-AV-701-M12-274|NPN|PUR,0.3 m + M12 4-pin|-|Normallyopen(NO)|42g|
|330-320-074|DW-AV-703-M12-274|PNP|PUR,0.3 m + M12 4-pin|-|Normallyopen(NO)/ IO-Link|42g|



*LED in IO-Link mode default value set to 2 = same as SIO 

Note: part reference may include additional suffix to indicate a revision version or special version. Further information is available on request. 

Operators of the products we supply are responsible for compliance with measures for the protection of persons. The use of our equipment in applications where the safety of persons might be at risk is only authorized if the operator observes and implements separate, appropriate and necessary measures for the protection of persons and machines. Terms of delivery and rights to change design reserved. 

**CONTRINEX AG** Industrial Electronics 

Route du Pâqui 3 – P.O. Box – CH 1720 Corminboeuf – Switzerland – **Tel:** +41 26 460 46 46 **Fax:** +41 26 460 46 40 – **Internet:** www.contrinex.com – **E-mail:** info@contrinex.com 

DW-Ax-70x-M12_Rev 2_23.6.2023_IH-MB