Image not available
Illustrative purposes only
DSR120PS12
AC/DC DIN Rail Power Supply (PSU), ITE, 1 Output, 120 W, 12 VDC, 10 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: XP POWER
- Product type: AC / DC DIN Rail Mount Power Supplies
- Product Range: DSR
- No. of Outputs: 1 Output
- Output Power Max: 120W
- Input Voltage VAC: 85V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 85V
- Power Supply Approvals: ITE
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 10A
- Output Voltage - Output 1: 12VDC
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 64.06 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
XP Power ## 120 Watts ## • Ultra Slim Design - 32 mm **xxx Series** ## • Ultra Slim Design - 32 mm - 150% Peak Load for 3 seconds - Ambient Operation from -25 °C to +70 °C - Full Load at 60 °C (24V/48V) - High Efficiency - Up to 92% - Volt-Free Contact for DC OK - Selectable Parallel Operation - 85 to 264 VAC Operation - 3 Year Warranty Dimensions: DSR120: 1.26 x 4.88 x 4.69” (32.0 x 124.0 x 119.0 mm) ## Models & Ratings |Output Voltage|Output Power<br>Output Voltage Trim|Output Voltage Trim(3)|Output Current|Peak Current(2)|Typical Efficiency(1)|Model Number| |---|---|---|---|---|---|---| |12 V|100 W|12.0-14.0 V|8.33 A|12.5 A|89.5%|DSR120PS12| |24 V|120 W|24.0-28.0 V|5.0 A|7.5 A|91.0%|DSR120PS24| |48 V|120 W|48.0-56.0 V|2.5 A|3.75 A|92.0%|DSR120PS48| ## ~~**Notes**~~ _1. Typical efficiency at 230 VAC and full load._ _2. Peak current is for a maximum of 3 s, see Application Notes. Average power is not to exceed nominal output power._ _3. Output current should be limited so that nominal output power is not exceeded._ **==> picture [160 x 202] intentionally omitted <==** **----- Start of picture text -----**<br> 4.69 (119.0)<br>4.47 (113.5)<br>ST 1 2 3 4<br>DCOK -V +V<br>VOUT ADJ.<br>GREEN OKRED FAULT ©<br>PARALLELSINGLE q 4.88 yl<br>(124.0)<br>DSR120<br>xppower.com<br>i L N | \ |<br>1 2 3<br>1.26 (32.0)<br>**----- End of picture text -----**<br> **==> picture [109 x 95] intentionally omitted <==** **----- Start of picture text -----**<br> Pin Connector<br>Conn Pin Designation<br>1 L<br>AC<br>2 N<br>I/P<br>3 Ground<br>1 DC OK<br>DC 2 DC OK<br>O/P 3 -Vout<br>4 +Vout<br>**----- End of picture text -----**<br> ~~**Notes**~~ 1. All dimensions in inches (mm) **==> picture [103 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> 3. Tolerance: ±0.02 in (±0.5 mm)<br>**----- End of picture text -----**<br> 2. Weight: 1.17 lbs (530g) **www.xppower.com** 1 XP Power |Characteristic|Minimum|Typical|Maximum|Units|Notes & Conditions| |---|---|---|---|---|---| |Input Voltage - Operating|85||264|VAC|| |Input Frequency|47|50/60|63|Hz|| |Power Factor||0.95|||At 230 VAC. Conforms to EN61000-3-2 Class A| |Input Current - Full Load||1.2/0.6||A|115/230 VAC| |Inrush Current|||35/65|A|At 115/230 VAC. Cold start, 25 °C| |Earth Leakage Current|||1.0|mA|At 264 VAC, 60 Hz| |Input Protection|T5.0 A / 250 V internal in-line fuse||||| Output Characteristic Minimum Typical Maximum Units Notes & Conditions ~~GGa~~ Output Voltage - V1 ~~Ge~~ 12 ~~GO~~ 48 ~~GG~~ VDC See Models and Ratings table ~~DG~~ Initial Set Accuracy ±1 % At 100% load ~~DG~~ Output Voltage Adjustment % See Models and Ratings table ~~DG~~ Minimum Load 0 A No minimum load required ~~DG~~ Start Up Delay 500 ms At 100 VAC ~~DG~~ Hold Up Time 20 ms At full load ~~ReRe~~ Line RegulationLoad Regulation ~~GOD~~ ±0.5±1 %% ~~se~~ Transient Response - V1 5 % Recovery within 1% in less than 200 for a 50% step load change at 0.2 A/ μμ ss ~~a~~ Ripple & Noise ~~OG~~ 100/120/240 mV pk-pk 12 V/24 V/48 V models. Measured at 20 MHz bandwidth Overvoltage Protection ~~ReeeRe~~ 295815 ~~GGGGGG~~ 203566 VVV 12 V model at 115/230 VAC input24 V model at 115/230 VAC input48 V model at 115/230 VAC input ~~pO~~ Overload Protection 110 150 % Trip & restart. See application note. Short Circuit Protection Trip & restart (hiccup mode), for 5 cycles then latch. Auto recovery ~~a eG~~ Thermal Protection 105 ±5 °C Measured internally, recycle AC to reset ~~Re~~ Temperature Coefficient ~~GG~~ 0.03 %/ ˚ C ## General |Characteristic<br>~~**p**o~~|Minimum|Typical|Maximum|Units|Notes & Conditions| |---|---|---|---|---|---| |Efficiency<br>~~**p**o~~||91|~~f~~|%<br>~~f~~|See Models & Ratings table<br>~~f~~| |Isolation: Input to Output<br>Input to Ground<br>Output to Ground<br>~~a~~|3000<br>~~GC~~|~~GC~~|~~GC~~|VAC<br>~~GC~~|~~GC~~| ||2500<br>~~sO~~|~~sO~~|~~sO~~|VAC<br>~~sO~~|~~sO~~| ||500<br>~~eG~~<br>~~ee~~|~~eG~~||VAC|| |Switching Frequency<br>~~a~~|~~ee~~|65||kHz|PFC, fixed| ||60<br>~~ee~~||440|kHz|Main converter, variable at 115/230 VAC input| |DC OK Signal<br>~~a~~<br>~~a~~|Volt free contacts rated at 60 VDC/0.3 A, 30 VDC/1.0 A or 30 VAC/0.3 A (resistive load)<br>~~ee~~||||| |Output LED<br>~~a~~<br>~~Re~~|Green LED to indicate output on.<br>~~GG~~<br>||||| |Mean Time Between Failure<br>~~eG~~<br>~~Re~~|300<br>~~eG~~<br>|~~eG~~<br>|~~eG~~<br>~~GG~~|kHrs<br>~~eG~~<br>~~GG~~|MIL-HDBK-217F, +25 °C GB<br>~~eG~~| |Weight<br>~~Re~~|~~GG~~|1.17 (530)<br>~~GG~~|~~GG~~<br>~~GG~~|lb (g)<br>~~GG~~<br>~~GG~~|| **www.xppower.com** 2 ||**DSR120 Series**|**DSR120 Series**|||||| |---|---|---|---|---|---|---|---| ||**DSR120 Series**|**DSR120 Series**||**AC-DC Power Supplies**|||XP Power| |Environmental<br>Characteristic<br>Minimum<br>Typical<br>Maximum<br>Units<br>Notes & Conditions<br>Operating Temperature<br>-25<br>+70<br>°C<br>See derating curve in Application Notes<br>Storage Temperature<br>-40<br>+85<br>°C<br>Cooling<br>Natural convection<br>Operating Humidity<br>20<br>95<br>%RH<br>Non-condensing<br>Operating Altitude<br>5000<br>m<br>Shock<br>4<br>g<br>IEC68-2-27, 22 ms half sine, 3 times in each of 6<br>axes<br>Vibration<br>2<br>g<br>IEC68-2-6, 10-500 Hz, 10 mins/sweep. 60 mins for<br>each of 3 axes<br>~~—_——_—~~|||||||| ||EMC: Emissions||||||| ||Phenomenon|Standard||Test Level|Criteria|Notes & Conditions|| ||Conducted|EN55032||Class B|||| ||Radiated|EN55032||Class B|||| ||Harmonic Current|EN61000-3-2||Class A|||| ||Voltage Fluctuations|EN61000-3-3|||||| |EMC: Immunity<br>Phenomenon<br>Standard<br>Test Level<br>Criteria<br>Notes & Conditions<br>ESD Immunity<br>EN61000-4-2<br>6 kV<br>A<br>Contact<br>8 kV<br>Air Discharge<br>Radiated Immunity<br>EN61000-4-3<br>10 V/m<br>A<br>EFT/Burst<br>EN61000-4-4<br>3<br>A<br>Surges<br>EN61000-4-5<br>Installation class 3<br>A<br>Conducted<br>EN61000-4-6<br>10 V<br>A<br>Magnetic Fields<br>EN61000-4-8<br>4<br>A<br>Dips and Interruptions<br>EN55035<br>Dip: 30%, 10 ms<br>A<br>Dip: 60%, 100 ms<br>A/B<br>High Line/Low Line<br>Dip: 100%, 5000 ms<br>B<br>~~===:~~|||||||| ||Safety Approvals||||||| ||Safety Agency|Safety Standard|||Notes & Conditions||| |||UL508|||Industrial Control Equipment||| ||UL||||||| |||CSA C22.2 60950-1|||Information Technology||| ||EN|EN62368-1|||Information Technology||| ||CE|Meets all applicable directives|||||| ||UKCA|Meets all applicable legislation|||||| **www.xppower.com** 3 XP Power ## Mechanical Details **==> picture [414 x 284] intentionally omitted <==** **----- Start of picture text -----**<br> 4.69 (119.0)<br>4.47 (113.5)<br>1 2 3 4<br>DCOK -V +V<br>Pin Connector<br>VOUT ADJ. Conn Pin Designation<br>GREEN OKRED FAULT 1 L<br>| AC<br>PARALLEL I/P 2 N<br>SINGLE 4.88 3 Ground<br>1 DC OK<br>(124.0) DC 2 DC OK<br>O/P 3 -Vout<br>4 +Vout<br>DSR120<br>xppower.com<br>= L N \ |<br>a 1 2 3 s 1.26 (32.0)<br>**----- End of picture text -----**<br> ~~**Notes**~~ 1. All dimensions in inches (mm) 3. Tolerance: ±0.02 in (±0.5 mm) 2. Weight: 1.17 lbs (530 g) ## Application Notes ~~—sii‘= i;~~ **Derating Curves** **==> picture [492 x 201] intentionally omitted <==** **----- Start of picture text -----**<br> DSR120PS12<br>150<br>100<br>Peak Load<br>Continuous Load<br>67<br>0<br>-25 -20 -15 -15 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70<br>Temperature (°C)<br>Load (%)<br>**----- End of picture text -----**<br> **www.xppower.com** 4 XP Power ## Application Notes ~~Me~~ **==> picture [491 x 474] intentionally omitted <==** **----- Start of picture text -----**<br> Derating Curves<br>DSR120PS24<br>150<br>125<br>112.5<br>Peak Load<br>100<br>Continuous Load<br>75<br>50<br>25<br>0<br>-25 -20 -15 -15 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70<br>Temperature (°C)<br>DSR120PS48<br>150<br>125<br>112.5<br>100 Peak Load<br>Continuous Load<br>75<br>50<br>25<br>0<br>-25 -20 -15 -15 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70<br>Temperature (°C)<br>Load (%)<br>Load (%)<br>**----- End of picture text -----**<br> **www.xppower.com** 5 **DSR120 Series AC-DC Power Supplies** :vy XP Power ~~—~~ S ~~e AP.~~ ## **DC OK** **==> picture [335 x 64] intentionally omitted <==** **----- Start of picture text -----**<br> i<br>i)<br>i)<br>i)<br>/1<br>|as<br>Open = Output fail, if voltage drops below 80% of nominal<br>Closed = Output good<br>Contact Rating: 0.3 A at 60 VDC, 1.0 A at 30 VDC, 0.5 A at 30 VAC.<br>500 VDC isolation to output.<br>1<br>DCOK<br>2<br>DCOK<br>**----- End of picture text -----**<br> A peak load can be used for a certain period after which the output goes into overload mode. Overload operation is trip and restart. The peak load duration depends on the value of the load, e.g. a peak load of 150% can be taken for approximately 3s. After this time the output will turn off for approximately 7s before turning back on. If the load has reduced to 100% or less than normal operation is resumed. If the load remains at 150% then the output is maintained for a further 3s before turning off for 7s. See example plot below. **==> picture [135 x 33] intentionally omitted <==** **----- Start of picture text -----**<br> 3s<br>150%<br>7s<br>**----- End of picture text -----**<br> If the peak load is less than 150%, the duration of the peak can be longer than 3s before the output turns off, for example, a peak load of 130% could typically be taken for up to 13s and a peak load of 140% could typically be taken for up to 5s. The off duration is always approximately 7s. Average power is not to exceed nominal output power. **www.xppower.com** 06 July 2022
Updated at February 9, 2023
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →