DRA1-SPF240D25

## **DRA1 SERIES | SPF AC OUTPUT** 

## DIN RAIL MOUNT SOLID STATE RELAYS 

## Features 

- 10mm Single Channel DIN Rail Mount SSR Assembly 

- AC Ratings of 280 VAC @ 10 Amps 

- 3-15 VDC, 15-32VDC Control 

- Cage style screw terminals for easy connection 

- Fits standard 35mm DIN rail 

- Includes LED Status Indicator 

## **PRODUCT SELECTION** 

|**Control Voltage**|**10A (Zero Voltage Turn-On)**|**10A (Instantaneous Turn-On)**|
|---|---|---|
|**3 - 15 VDC**|DRA1-SPF240D25|DRA1-SPF240D25R|
|**15 - 32 VDC**|DRA1-SPFE240D25|DRA1-SPFE240D25R|



## **SPECIFICATIONS** 

## Output **[(1)]** 

|**Description**|**SPF(E)240D25**|
|---|---|
|**Operating Voltage [VAC]**|12 - 280|
|**Transient Overvoltage [Vpk]**|600|
|**Maximum Load Current [Arms](2)(3)**|10|
|**Minimum Load Current [Arms]**|0.06|
|**Maximum Off-Sate Leakage Current @ Rated Voltage [mArms]**|0.1|
|**Maximum Off-State dv/dt @ Maximum Rated Voltage [V/µsec](4)**|500|
|**Maximum 1 Cycle Surge Current (50/60 Hz) [Apk]**|239 / 250|
|**Maximum I2t for Fusing (50/60 Hz, ½ Cycle) [A2 Sec]**|285 / 260|
|**Maximum On-State Voltage Drop @ Rated Current [Vpk]**|1.6|



Page 1 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## Input **[(1)]** 

|**Description**|**SPF240D25**|**SPFE240D25**|
|---|---|---|
|**Control Voltage Range**|3 - 15 VDC|15 - 32 VDC|
|**Must Turn-On Voltage**|3.0 VDC|15 VDC|
|**Must Turn-Off Voltage**|1.0 VDC|3.0 VDC|
|**Typical Input Current**|15 mA|15 mA|
|**Nominal Input Impedance**|300 Ohm|1500 Ohm|
|**Maximum Turn-On Time [msec](5)**|½ Cycle|½ Cycle|
|**Maximum Turn-Off Time [msec]**|½ Cycle|½ Cycle|



## General **[(1)]** 

|**Description**|**Parameters**|
|---|---|
|**Dielectric Strength,**<br>**Input/Output (50/60 Hz)**|4000 Vrms|
|**Maximum Insulation Resistance (@ 500 VDC)**|109Ohm|
|**Maximum Capacitance, Input/Output**|8 pF|
|**Ambient Operating Temperature Range**|-40 to 80°C|
|**Ambient Storage Temperature**|-40 to 125°C|
|**Weight (Typical)**|0.32 lb oz (145.5 g)|
|**Encapsulation**|Thermally Conductive Epoxy|



## **WIRING DIAGRAMS[(A)]** 

> **(A)** Wiring diagram is identical for each individual section whether it is a single or four channel assembly. 

> **(B)** Load can be placed on either side of “Power” 

For additional information or specific questions, contact Sensata Technical Support. 

Page 2 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## **MECHANICAL SPECIFICATIONS** 

Tolerances: ±0.02 in / 0.5 mm 

All dimensions are in inches [millimeters] 

## **THERMAL DERATE INFORMATION** 

## **GENERAL NOTES** 

> **(1)** All parameters at 25 °C unless otherwise specified. 

> **(2)** See Derating Chart on page 4. 

> **(3)** Steady state load current exceeding 10 Amps will damage socket. 

> **(4)** Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

> **(5)** Turn-On Time for DC control instantaneous turn-on versions 0.1 msec. 

For additional information or specific questions, contact Sensata Technical Support. 

Page 3 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## **AGENCY APPROVALS & CERTIFICATIONS** 

• Designed in accordance with the requirements of IEC 62314 

- UL: E116950 (Relay Only) 

## **WARNINGS** 

## RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE 

- The product’s side panels may be hot, allow the product to cool before touching 

- Follow proper mounting instructions including torque values 

- Do not allow liquids or foreign objects to enter this product 

**Failure to follow these instructions can result in serious injury, or equipment damage.** 

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH 

- Disconnect all power before installing or working with this equipment 

- Verify all connections and replace all covers before turning on power **Failure to follow these instructions will result in death or serious injury.** 

Page 4 

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. 

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. 

## **CONTACT US** 

## **Americas** 

+1 (877) 502 5500 – Option 2 sales.crydom@sensata.com 

**Europe, Middle East & Africa** +44 (1202) 416170 ssr-info.eu@sensata.com **Asia Pacific** sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. 

www.sensata.com 

Rev: 03/22/24 ECN 20395 FDE-07-01 Rev. B 

Copyright © 2024 Sensata Technologies, Inc.