DRA1-CXE240D5R

## **DRA1 CX Series** 

## Relay: 29026295-AA - Relay SPST 5A 12-280VAC 35mm DIN RAIL DRA1-CXE240D5 

- 10mm Single Channel DIN Rail Mount SSR Assembly 

- AC Ratings up to 380 VAC and 5 Amps 

- 3-15 and 15-32VDC control 

- Cage style screw terminals for easy connection 

- Fits standard 35mm DIN rail 

- Includes LED Status indicator 

## **PRODUCT SELECTION** 

|**Description**|**5 A**|**5 A**|**5 A**|**5 A**|**5 A**|
|---|---|---|---|---|---|
|3-15 VDC Control|DRA1-CX240D5|DRA1-CX240D5-B (2)|DRA1-CX240D5R|||
|4-15 VDC Control||||DRA1-CX380D5|DRA1-CX380D5R|
|15-32 VDC Control|DRA1-CXE240D5||DRA1-CXE240D5R|DRA1-CXE380D5||



## **OUTPUT SPECIFICATIONS (1)** 

|**Description**|**CX(E)240x5**|**CX(E)380x5**|
|---|---|---|
|Operating Voltage [VAC]|12-280|48-380**|
|Transient Overvoltage [Vpk]|600|1200|
|Maximum Load Current [Arms] (3)|5|5|
|Minimum Load Current [Arms]|0.06|0.06|
|Maximum Off-State Leakage Current @ Rated Voltage [mArms]|0.1|0.1|
|Minimum off-state dv/dt @ maximum rated voltage [V/µsec] (4)|500|500|
|Maximum 1 Cycle Surge Current (50/60 Hz) [Apk]|239/250|239/250|
|Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A²sec]|285/260|285/260|
|Maximum On-State Voltage Drop @ Rated Current [Vpk]|1.4|1.4|



## **INPUT SPECIFICATIONS (1)** 

|**Description**|**DRA1-CX**|**DRA1-CX240D5-B (2)**|**DRA1-CX380D5**|**DRA1-CXE**|
|---|---|---|---|---|
|Control Voltage Range|3-15 VDC|4-28 VDC|4-15 VDC|15-32 VDC|
|Must Turn On Voltage|3.0 VDC|1.0 VDC|4.0 VDC|15.0 VDC|
|Must Turn Off Voltage|1 .0 VDC|4 .0 VDC|1 .0 VDC|1 .0 VDC|
|Typycal Input Current|15 mAdc|10 mAdc|15 mAdc|15 mAdc|
|Nominal Input Impedance|300 Ohm|1360 Ohm|240 Ohm|1500 Ohm|
|Maximum Turn-On Time [msec] (5)|1/2 Cycle|1/2 Cycle|1/2 Cycle|1/2 Cycle|
|Maximum Turn-Off Time [µsec]|1/2 Cycle|1/2 Cycle|1/2 Cycle|1/2 Cycle|



## **GENERAL SPECIFICATIONS** 

|**Description**|**Parameters**|
|---|---|
|Dielectric Strength, Input/Output/Base (50/60Hz)|4000 VRMS|
|Minimum Insulation Resistance(@500 VDC)|109Ohms|
|Maximum Capacitance, Input/Output|10 pF|
|Ambient Operating Temperature Range|-30 to 80°C|
|Ambient Storage Temperature Range|-30 to 125°C|
|Weight (typical)|0.063 lb (28.6g)|
|Encapsulation|Themally Conductive Epoxy|



## **GENERAL NOTES** 

- 1) All parameters at 25°C unless otherwise specified. 

- 2) The output is normally closed and does not have a LED status indicator 

- 3) See Derating chart on page 3. 

- 4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

- 5) Turn-on time for  DC control  random turn-on versions is 0.1 msec 

****NOTE: Voltages in excess of 380V will damage output terminals.** 

## **MECHANICAL SPECIFICATIONS** 

**WIRING DIAGRAM** 

## **THERMAL DERATE INFORMATION** 

## **AGENCY APPROVALS** 

Designed in accordance with the requirements of IEC 62314 

E116950  (relay only) LR81689 (relay only) 70938 UG (relay only) 

Rev. 110811 

**==> picture [529 x 353] intentionally omitted <==**

**----- Start of picture text -----**<br>
crydom ” DIN Rail Mount<br>A DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO<br>HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI RISCO DE<br>ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA DESCARGA i<br>SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O ELETTRICA OU H<br>EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI EXPLOSAO H<br>OR ARC FLASH. * Desconectar « Eteindre EXPLOSION. ONE. « Desconectar<br>« Disconnect all todos los toutes les « Stellen Sie « Spenga tutta 0 equipamento H<br>power before suministros de sources Jeglichen 'alimentazion de toda a i<br>installing or energia a este d'énergie de Strom ab, der e che fornisce energia antes<br>working with equipo antes cet appareil dieses Gerat questa de instalar ou<br>this equipment. de trabajar avant de versorgt, bevor apparecchiatu trabalhar com |<br>J r con este equipo. travailler Sie an dem ra prima del este equipamen |<br>= Veifeared dessus de cet Gerat Arbeiten lavorare a questa to<br>connectionsand replace all « lasVerificar conexionestodas appareilia " * durchfihrenVor der apparecchiatui ra e Verificar todas<br>covers before y colocar todas « Vérifier tous Inbetriebnahme « Verificare tutti as conexées e |<br>tuming on las tapas antes connections, et alle Anschilisse i collegamenti recolocar todas |<br>power. de energizer remettre tous liberpriifen und e sostituire as tampas<br>Failure el equipo. couverts en alle Gehauseteile tutte le coperture antes de religar |<br>eI meme sous a<br>instruinstructionstionsto followwi will incumplimiento olace avant de montieren. sull'alimentaziprima della  one oequipamentoi ||<br>result in death de estas De non-suivi de S nfo araias |<br>or serious injury. instrucciones ces instructions Unterlassung L'omissione di estas instrugdes |<br>puede provoquera la di seguire queste pode levar a morte<br>la muerte provocar o mort ou des Anweisungeneter =istruz aeioni ou lesées sérias .<br>lesiones serias. lésions sérieuses kénnen zum provochera la<br>sérieuses. Tode oder zu morte o di<br>schweren lesioni serie<br>Verletzungen<br>fiihren.<br>**----- End of picture text -----**<br>


A WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA/ AVVERTENZA/ AVISO RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHADEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHAUSEERHITZUNG + The product's side panels may be hot, allow * Les panneaux latéraux du produit peuvent étre * Die Seitenwande kénnen heif§ sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkiihlen, bevor Sie es berihren. * Follow proper mounting instructions including | toucher. * Beachten Sie die Montageanweisungen, torque values. * Respecter les consignes de montage, et * Fulhren Sie keine Fitissigkeiten oder * Do not allow liquids orforeign objects to enter | "otamment les couples de serrage._ Fremdkérper in das Produkt ein. this product. * Ne pas laisser péneétrer de liquide ni de corps étrangers a l'intérieur du produit. . . . _ | Le non-respect de cette directive peut entrainer, Die Nichtbeachtung dieser Anweisung kann pineal pinnae Soak sane “a7 result in| des lésions corporelles graves ou des Kérperverletzung oder Materialschaden jury, or equip ge. dommages matériels. zur Folge haben. RIESGO DE DANOS MATERIALES Y DE : RISCO DE DANO MATERIAL E DE AQUECIMENTO SOBRECALENTAMIENTO DE LA UNIDAD Spal DE DARNEMATERIALE DINVORMERO * Os paineéis laterais do produto podem estar * Los paneles laterales de! producto pueden *| pannelli laterali dell'apparecchio possono quentes; dé tempo ao produto para arrefecer over calentes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto antes de lhe tocar. i enfrie antes de tocarlo. : prima di toccarlo. * Siga devidamente as instrugdes de montagem. aaa “ie mst ucciones de me niaye: yen * Seguire le istruzioni di montaggio corrette. * Nao permita a entrada de liquidos e de objectos * particu ar oe pares cle aprelado. * Non far entrare liquidi o oggetti estranei in questo estranhos no produto. No dejar que penetren liquidos 0 cuerpos apparecchio extrafos en el producto. : producirse graves lesiones, dafios materiales. | qannj alle apparecchiature. danos materais. 

ed A brand of Do not forget to visit us at: www.crydom.com F Copyright © 2012 Crydom Inc. Specifications subject to change without notice. 

## **ANNEX - ENVIROMENTAL INFORMATION**