DR2260D20V

**DR22 SERIES | AC OUTPUT** DIN RAIL MOUNT SOLID STATE RELAYS 

## Features 

- Output ratings up to 35 Amps at 600 VAC 

- Built-in overvoltage protection 

- Integral heat sink eliminates the need for complex thermal calculations 

- DBC substrate for superior thermal performance 

- “Elevator” screw option to allow the use of ring or lug type terminals 

- IP20 touch-safe housing 

- AC or DC control 

- C-UL-US and TUV approved 

## **PRODUCT SELECTION** 

|**Control Voltage**|**20 A**|**30 A**|**35 A**|
|---|---|---|---|
|90-280 VAC/VDC|DR2260A20x|DR2260A30x|DR2260A35x|
|4-32 VDC|DR2260D20x|DR2260D30x|DR2260D35x|



## **SPECIFICATIONS** 

## Output[(2)] 

|**Description**<br>~~Df~~<br>~~Pe~~|**20 A**<br>~~Df~~|**30 A**<br>~~Df~~|**35 A**<br>~~Df~~|
|---|---|---|---|
|OperatingVoltage (47-440Hz) [Vrms]<br>~~Df~~<br>~~Pe~~<br>~~po~~|48-600<br>~~Df~~|48-600<br>~~Df~~|48-600<br>~~Df~~|
|Transient Overvoltage [Vpk]3<br>~~Pe~~<br>~~po~~<br>~~Pe~~|1200|1200|1200|
|Maximum Off-State Leakage Current @ Rated Voltage [mArms]<br>~~po~~<br>~~Pepo~~|1<br>||1<br>|<br>||1<br>|<br>||
|Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec]<br>~~Pepo~~<br>~~PR~~|500<br>||500<br>|<br>||500<br>|<br>||
|Load Current, General Use UL508/LC A IEC 62314 @ 40°C [Arms]<br>~~po~~<br>~~PRpo~~|20<br>|<br>||30<br>|<br>|<br>|<br>||35<br>|<br>|<br>|<br>||
|Load Current, Motor StartingUL508 FLA/LC B IEC 62314 @ 40°C [Arms]<br>~~PRpo~~<br>~~po~~|8.5/4.8<br>|<br>~~ee~~<br>|14/7.6<br>|<br>|<br>~~ee~~<br>|26/14<br>|<br>|<br>~~ee~~<br>|
|Minimum Load Current [mArms]<br>~~po~~<br>~~a~~<br>~~po~~|100<br>|<br>~~a~~<br>~~ee~~<br>|100<br>|<br>|<br>~~a~~<br>~~ee~~<br>|150<br>|<br>|<br>~~a~~<br>~~ee~~<br>|
|Maximum 1 Cycle Surge Current (50/60Hz) [Apk]<br>~~a~~<br>~~po ~~<br>~~po~~|286/300<br>~~a~~<br>~~ee~~<br> ~~|~~<br>~~ee~~|716/750<br>~~a~~<br>~~ee~~<br>~~|~~<br>~~|~~<br>~~ee~~|1290/1350<br>~~a~~<br>~~ee~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~ee~~|
|Maximum On-State Voltage Drop @ Rated Current [Vpk]<br>~~po ~~<br>~~a~~<br>~~po~~|1.35<br>~~ee ~~<br> <br>~~a~~<br>~~ee~~|1.35<br> ~~ee~~<br><br>~~a~~<br>~~ee~~|1.30<br>~~ee~~<br><br>~~a~~<br>~~ee~~|
|Maximum 1/2 Cycle I² t for Fusing(50/60Hz) [A² sec]<br>~~a~~<br>~~po~~|409/375<br>~~a~~<br>~~ee~~<br>||2563/2343<br>~~a~~<br>~~ee~~<br>|<br>||8320/7593<br>~~a~~<br>~~ee~~<br>|<br>||
|Minimum Power Factor (at Maximum Load)4<br>~~po~~<br>~~|~~<br>~~Pe~~|0.5<br>~~ee ~~<br>|0.5<br> ~~ee~~<br>|0.5<br>~~ee~~<br>|
|Motor RatingUL 508/IEC62314 [HP (kW)]: 120 VAC<br>~~Pe~~<br>~~Po~~|0.5 (0.37)<br><br>~~ae~~|1 (0.74)<br><br>~~ee~~|2 (1.5)<br><br>~~ee~~|
|Motor RatingUL 508/IEC62314 [HP (kW)]: 240 VAC<br>~~Pea~~<br>~~Po~~|1.5 (1.1)<br>~~a~~<br>~~ae~~|3 (2.2)<br>~~a~~<br>~~ee~~|5 (3.73)<br>~~a~~<br>~~ee~~|
|Motor RatingUL 508/IEC62314 [HP (kW)]: 480 VAC<br>~~Po~~|3 (2.24)<br>~~ae~~|5 (3.7)<br>~~ee~~|10 (7.4)<br>~~ee~~|



Page 1 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

## Input[(2)] 

**==> picture [543 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
Description DR2260Dxxx DR2260Axxx<br>Control Voltage Range 4-32 VDC  [5] 90-280 VAC/VDC  [6]<br>Maximum Reverse Voltage -32 VDC -<br>Minimum Turn-On Voltage  4 VDC 90 VAC/VDC<br>Must Turn-Off Voltage 1 VDC 5 VAC/VDC<br>Minimum Input Current (for on-state)  7 mA 6 mA<br>Maximum Input Current 15 mA 10 mA<br>Nominal Input Impedance Current Regulated Current Limited<br>Maximum Turn-On Time [msec]  1/2 Cycle  [7] 20<br>Maximum Turn-Off Time [msec]  1/2 Cycle 30<br>**----- End of picture text -----**<br>


## General[(2)] 

**==> picture [542 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
Description Parameters<br>Dielectric Strength, Input to Output (50/60Hz)  4000 Vrms<br>Dielectric Strength, Input/Output to Case (50/60Hz) 4000 Vrms<br>Minimum Insulation Resistance (@ 500 VDC) 10 [9]  Ohms<br>Maximum Capacitance, Input/Output 8 pF<br>Ambient Operating Temperature Range  [8] -40 to 80 °C<br>Ambient Storage Temperature Range -40 to 100 °C<br>Short Circuit Current Rating [9] 100kA<br>Weight (typical) Option “U” 10.5 oz (298 g), Option “V”,“W” 10.6 oz (301 g)<br>Housing Material UL94 V-0<br>Heat Sink Material Aluminum<br>Din Rail Clip Material Zink Plated Steel<br>Hardware Finish Nickel Plating<br>Input Terminal Screw Torque Range (lb-in/Nm) Option “U” 13-15/1.5-1.7, Option “V”,“W” 5/0.5  [10]<br>Load Terminal Screw Torque Range (lb-in/Nm) Option “U” 13-15/1.5-1.7, Option “V”,“W” 18-20/2-2.2<br>Humidity 95% non-condensing<br>LED Input Status Indicator Green<br>**----- End of picture text -----**<br>


Page 2 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

## **INPUT CURRENT INFORMATION** 

**==> picture [59 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-32 VDC Input<br>**----- End of picture text -----**<br>


**==> picture [177 x 108] intentionally omitted <==**

**==> picture [88 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
90-280 VAC/VDC Input<br>**----- End of picture text -----**<br>


**==> picture [193 x 115] intentionally omitted <==**

## **SURGE CURRENT INFORMATION** 

**==> picture [48 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
DR2260x20x<br>**----- End of picture text -----**<br>


**==> picture [233 x 77] intentionally omitted <==**

**==> picture [48 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
DR2260x30x<br>**----- End of picture text -----**<br>


**==> picture [231 x 86] intentionally omitted <==**

DR2260x35x 

**==> picture [233 x 77] intentionally omitted <==**

## **THERMAL DERATE INFORMATION[8]** 

**==> picture [424 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
DR2260x20x DR2260x30x DR2260x35x<br>**----- End of picture text -----**<br>


**==> picture [165 x 99] intentionally omitted <==**

**==> picture [165 x 99] intentionally omitted <==**

**==> picture [165 x 99] intentionally omitted <==**

Page 3 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

## **EQUIVALENT CIRCUIT BLOCK DIAGRAMS/WIRING DIAGRAM** 

DC Control 

**==> picture [308 x 65] intentionally omitted <==**

AD/DC Control 

**==> picture [332 x 70] intentionally omitted <==**

**==> picture [542 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended Wire Sizes<br>Terminal Wire Size  Wire Pull-Out<br>Configuration (Solid / Stranded) Strength (lbs)[N]<br>Output [13] 2 x 18 AWG (1 mm [2] ) Stranded 20 [88]<br>Relay “U” suffix 2 x 10 AWG (6 mm [2] ) Stranded 60 [266]<br>Input 2 x 18 AWG (1 mm [2] ) Stranded 20 [88]<br>Relay “U” suffix 2 x 12 AWG (4 mm [2] ) Stranded 40 [177]<br>2 x 20 AWG (0.75 mm [2] ) [minimum] 25 [111]<br>Output Contactor<br>2 x 10 AWG (6 mm [2] ) 80 [355]<br>“V” &“W” suffixes<br>2 x 8 AWG (10 mm [2] ) [maximum] 90 [400]<br>30 AWG (0.05 mm [2] ) [minimum] 4.5 [20]<br>Screw<br>Input Contactor 12 AWG (3.3 mm [2] ) [maximum] 30 [133]<br>“V” &“W” suffixes 26 AWG (0.13 mm [2] ) [minimum] 5 [22]<br>Spring<br>12 AWG (3.3 mm [2] ) [maximum] 5 [22]<br>**----- End of picture text -----**<br>


Page 4 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

## **MECHANICAL SPECIFICATIONS** 

*Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 

**==> picture [260 x 302] intentionally omitted <==**

**==> picture [293 x 196] intentionally omitted <==**

**----- Start of picture text -----**<br>
TABLE 1. Compatible Terminals<br>Terminals Fork Lug Ring Lug Copper Lug Copper Lug<br>Crydom Part<br>TRM0 TRM6<br>No.<br>Width [W]<br>0.45 (11.4) 0.45 (11.4)<br>in (mm)<br>Stud Size Dia<br>#8 (0.168) #8 (0.168)<br>[D] (in)<br>Wire Size<br>6-0 14-6<br>AWG<br>**----- End of picture text -----**<br>


**==> picture [164 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input Connector<br>Screw<br>Terminal<br>Spring<br>Terminal<br>**----- End of picture text -----**<br>


**==> picture [163 x 279] intentionally omitted <==**

**----- Start of picture text -----**<br>
Protective Earth Connection<br>10-32<br>Thread<br>Protective Earth (PE) screw type<br>recommended is 10-32 UNC standard not<br>provided with SSR. Through the use of<br>a DIN rail ground (protective conductor)<br>terminal block, the DIN rail itself can be<br>used as the grounding bus bar. In this<br>case, the zinc plated steel material used<br>for the DIN rail clip of DR22 models,<br>permits a secure path to ground and avoid<br>the need of a further PE connection.<br>**----- End of picture text -----**<br>


**==> picture [163 x 196] intentionally omitted <==**

**----- Start of picture text -----**<br>
Elevator Screw (Suffix ‘W’)<br>The Elevator Screw option allows the<br>screw and clamp to be raised out of the<br>mating threads completely. This provides<br>for the insertion and use of a ring or lug<br>type wire terminal. Refer to TABLE 1 for<br>Compatible Terminals.<br>**----- End of picture text -----**<br>


Page 5 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

Example : DR2260A20VRJ 

## **ORDERING OPTIONS** 

**==> picture [541 x 328] intentionally omitted <==**

**----- Start of picture text -----**<br>
DR22 60 A 20 V R J<br>Series<br>DR22<br>Operating Voltage<br>60:  48-600 VAC<br>Control Voltage  [1]<br>A:  90-280 VAC/VDC<br>D:  4-32 VDC<br>Rated Load Current<br>20:  20 Amps<br>30:  30 Amps<br>35:  35 Amps [High I2t]<br>Terminal Layout<br>U:  Relay Configuration<br>V:  Contactor Configuration (std. screw)<br>W:  Contactor Configuration (elevator screw)<br>Switching Type<br>Blank:  Zero Voltage Turn-On<br>R:  Instantaneous Turn-On (Motor Rating Certified)<br>Input Connector<br>Blank:  Screw Terminal Required for valid part number<br>J:  Spring Terminal (V and W suffixes only) For options only and not required for valid part<br>number<br>**----- End of picture text -----**<br>


## **GENERAL NOTES** 

**(1) Control voltage 18-52 VAC/VDC is available upon request.** 

**(2) All parameters at 25°C unless otherwise specified.** 

**(3) Output will self trigger between 900-1200 Vpk, not suitable for capacitive loads.** 

**(4) High inductive loads requires nominal control voltage; AC input models only.** 

**(5) Increase minimum voltage by 1 V for operations from -20 to -40°C.** 

**(6) For ambient temperatures above 40°C the maximum control voltage must not exceed 250 VAC/VDC.** 

**(7) Turn-on time for Instantaneous turn-on versions is 0.1 msec.** 

**(8) AC input models operating range is -20 to 60 °C.** 

**(9) When protected with the appropriate class and rated fuse. For detailed info please contact Crydom Technical Support.** 

**(10) Input torque only for contactor (V,W) with screw terminals Connector.** 

**(11) For single surge pulse Tc=25°C; Tj=125°C. For AC Output SSRs, AC RMS value of surge current equals the peak value divided by 2 (1.414).** 

**(12) Minimum spacing to obtain max. current is 22.5mm between adjacent units.** 

**(13) For 35 Amp Relay (”U”) layout models, use Pin Terminals (L 0.410 in x Ø 0.102 in) to install 8 AWG wire.** 

**(14) Applicable to Relay (”U”) option.** 

**(15) Test made with a unit  fixed between DIN RAIL Stoppers. Multiple devices mounted close each other, results may vary.** 

Page 6 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

**ACCESSORIES** 

## **Recommended Accessories** 

**==> picture [270 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connectors ID Marker Lug Terminal<br>CP201 CNLB TRM0<br>CP202 CNLN TRM6<br>CNL2<br>po<br>**----- End of picture text -----**<br>


**Connectors** Part number: CP201, CP202 **Lug Terminal** Part number: TRM0 ~~ee~~ Pluggable input connectors, 2 position, with screw ~~ee~~ Copper wire lug for AWG 6 (13.3 mm²) to AWG terminals (CP201) or spring type terminals (CP202). 0 (53.5 mm²) wire size. For use with “Elevator” Compatible with Contactor configuration NOVA22 screw option (“W” suffix) NOVA22 SSRs. SSRs. 

Page 7 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

## **AGENCY APPROVALS & CERTIFICATIONS** 

## 

United States Standard for Industrial Control Equipment - UL 508 and Canadian Standard Association for Industrial Control Equipment – C22.2 No. 14. 

Vibration Resistance: **[15]** 

IEC 60068-2-6: Amplitude Range 10-500 Hz, Displacement 0.75mm 

Shock Resistance: **[15]** 

IEC 60068-2-27: Peak Acceleration 50g, Duration11ms. 

|**Electromagnetic Compatibility**|**Electromagnetic Compatibility**|**Electromagnetic Compatibility**|**Electromagnetic Compatibility**|**Electromagnetic Compatibility**|
|---|---|---|---|---|
|**Generic**<br>**Standard**|**Inmunity**<br>**Tests**|**Test Specification**<br>**Level**||**Performance**|
|IEC 61000-6-2<br>Immunity for<br>Industrial<br>Environments|Electrostatic<br>Discharge<br>IEC 61000-4-2|8kV air discharge||Criterion B|
|||6kV contact discharge||Criterion A|
||Fast transients<br>(burst)<br>IEC 61000-4-4|Output|2kV, 5kHz, 100kHz|Criterion B|
|||Input|1kV, 5kHz, 100kHz|Criterion B|
||Surge<br>IEC 61000-4-5|Output|1kV Line to Earth|Criterion B|
||||2kV Line to Earth|Criterion B|
|||AC Input<br>Option|1kV Line to Earth|Criterion B|
||||2kV Line to Earth|Criterion B|



## **WARNINGS** 

RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE 

- The product’s side panels may be hot, allow the product to cool before touching 

- Follow proper mounting instructions including torque values 

- Do not allow liquids or foreign objects to enter this product 

**Failure to follow these instructions can result in serious injury, or equipment damage.** 

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH 

- Disconnect all power before installing or working with this equipment 

- Verify all connections and replace all covers before turning on power **Failure to follow these instructions will result in death or serious injury.** 

Page 8 

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. 

Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS 

ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. 

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. 

## **CONTACT US** 

## **Americas** 

+1 (877) 502 5500 sales.crydom@sensata.com 

**Europe, Middle East & Africa** +44 (1202) 416170 ssr-info.eu@sensata.com 

## 

sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. 

Copyright © 2019 Sensata Technologies, Inc. 

www.sensata.com 

Rev. 10/16/19 ECN 20785 FDE-07-01 Rev. B