Image not available
Illustrative purposes only
DQ12RB6FF50Q.
PHOTOSENSOR, FIXED FIELD, 50MM, NPN/PNP
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: BANNER ENGINEERING
- Product type:
- Sensing Method:Fixed Field; Product Range:DQ12 Series; Connection Method:M8 Connector; Supply Voltage Min:10V; Supply Voltage Max:30V; Sensing Range Max:50mm; Sensor Output Type:N
- Product Range: DQ12 Series
- Sensing Method: Fixed Field
- Connection Method: M8 Connector
- Sensing Range Max: 50mm
- Sensor Output Type: NPN / PNP DO
- Supply Voltage Max: 30V
- Supply Voltage Min: 10V
- Sensing Distance Max: 50mm
- Supply Voltage DC Max: 30V
- Supply Voltage DC Min: 10V
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 100.91 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**==> picture [148 x 792] intentionally omitted <==** ## Q12 Series Sensor Original Instructions p/n: 119223 Rev. Q 06-May-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com Q12 Series Sensor ## Contents **Chapter 1 Features.................................................................................................................. 3** Models ........................................................................................................................................................................................................... 3 **Chapter 2 Indicator Features.................................................................................................. 5** Wiring............................................................................................................................................................................................................. 5 **Chapter 3 Specifications ........................................................................................................ 6** FCC Part 15 Class A for Unintentional Radiators.......................................................................................................................................... 7 Industry Canada ICES-003(A)....................................................................................................................................................................... 7 Dimensions.................................................................................................................................................................................................... 7 Q12 Retroreflective Mode Performance Curves............................................................................................................................................ 8 Q12 Opposed Mode Performance Curves .................................................................................................................................................... 8 Q12 Fixed-Field Performance Curves........................................................................................................................................................... 9 **Chapter 4 Accessories.......................................................................................................... 10** Cordsets ...................................................................................................................................................................................................... 10 Brackets........................................................................................................................................................................................................11 Sensor Status Indicators ..............................................................................................................................................................................11 Apertures ......................................................................................................................................................................................................11 **Chapter 5 Product Support and Maintenance .................................................................... 13** Clean with Mild Detergent and Warm Water ............................................................................................................................................... 13 Repairs ........................................................................................................................................................................................................ 13 Contact Us................................................................................................................................................................................................... 13 Banner Engineering Corp Limited Warranty................................................................................................................................................ 13 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com Q12 Series Sensor ## Chapter Contents Models.................................................................................................................................................................................................................. 3 ## Chapter 1 Features Miniature self-contained photoelectric sensors in a universal housing - Bright, visible red (640 nm) light source - Standard models available with 4-wire 2 m (6.5 ft) or 9 m (30 ft) cable or 3 or 4-wire 150 mm (6 in) pigtail with Pico-style M8 threaded connector - Solid-state, bipolar outputs: one current sourcing (PNP) and one current sinking (NPN) standard on 4-wire models - Single output solid-state PNP or NPN standard on Q3 models - • Light Operate (LO) or Dark Operate (DO), depending on model • Compact 8 mm (0.31 in) housing mounts almost anywhere • Crosstalk avoidance circuitry for applications with multiple sensors • LED status indicators for Power ON, Output Overload, Signal Received, and Marginal Signal • Advanced ASIC technology makes the sensor resistant to optical and electrical noise sources ## WARNING: - Do not use this device for personnel protection - Using this device for personnel protection could result in serious injury or death. - This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. ## Models Opposed mode emitter (640 nm visible red) and receiver (effective beam 5.7 mm) models (2 m range) **==> picture [430 x 128] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |Model|Connection|Output| |Q126E (emitter)|2 m (6.5 ft) cable|N/A| |Q126EQ3 (emitter)|150 mm (6 in) cable with a 3-pin M8 QD|N/A| |Q12AB6R|2 m (6.5 ft) cable|Bipolar LO| |Q12RB6R|2 m (6.5 ft) cable|Bipolar DO| |Q12AP6RQ3|150 mm (6 in) cable with a 3-pin M8 QD|1 PNP LO| |Q12RP6RQ3|150 mm (6 in) cable with a 3-pin M8 QD|1 PNP DO| |Q12AN6RQ3|150 mm (6 in) cable with a 3-pin M8 QD|1 NPN LO| |Q12RN6RQ3|150 mm (6 in) cable with a 3-pin M8 QD|1 NPN DO| **----- End of picture text -----**<br> Retroreflective range is specified using one model BRT-60X40C retroreflector. The actual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the retroreflector(s) used. ## Polarized retroreflective models (640 nm visible red) (1 m range) **==> picture [430 x 65] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |Models|Connection|Output| |Q12AB6LP|2 m (6.5 ft) cable|Bipolar LO| |Q12RB6LP|2 m (6.5 ft) cable|Bipolar DO| |Q12AP6LPQ3|150 mm (6 in) cable with a 3-pin M8 QD|1 PNP LO| |Continued on page 4| **----- End of picture text -----**<br> © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 3 of 14 06-May-25 Q12 Series Sensor Features **==> picture [500 x 205] intentionally omitted <==** **----- Start of picture text -----**<br> Continued from page 3<br>Models Connection Output<br>Q12RP6LPQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP DO<br>Q12AN6LPQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN LO<br>Q12RN6LPQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN DO<br>Retroreflective models (640 nm visible red) (1.5 m range)<br>Models Connection Output<br>Q12AB6LV 2 m (6.5 ft) cable Bipolar LO<br>Q12RB6LV 2 m (6.5 ft) cable Bipolar DO<br>Q12AP6LVQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP LO<br>Q12RP6LVQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP DO<br>Q12AN6LVQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN LO<br>Q12RN6LVQ3 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN DO<br>**----- End of picture text -----**<br> ## Fixed-field visible red models (640 nm) **==> picture [500 x 287] intentionally omitted <==** **----- Start of picture text -----**<br> Models Range Connection Output<br>Q12AB6FF15 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 2 m (6.5 ft) cable Bipolar LO<br>Q12RB6FF15 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 2 m (6.5 ft) cable Bipolar DO<br>Q12AP6FF15Q3 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP LO<br>Q12RP6FF15Q3 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP DO<br>Q12AN6FF15Q3 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN LO<br>Q12RN6FF15Q3 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN DO<br>Q12AB6FF30 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar LO<br>Q12RB6FF30 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar DO<br>Q12AP6FF30Q3 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP LO<br>Q12RP6FF30Q3 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP DO<br>Q12AN6FF30Q3 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN LO<br>Q12RN6FF30Q3 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN DO<br>Q12AB6FF50 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar LO<br>Q12RB6FF50 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar DO<br>Q12AP6FF50Q3 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP LO<br>Q12RP6FF50Q3 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 PNP DO<br>Q12AN6FF50Q3 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN LO<br>Q12RN6FF50Q3 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 150 mm (6 in) cable with a 3-pin M8 QD 1 NPN DO<br>**----- End of picture text -----**<br> Performance is based on the use of a 90% reflectance white test card. - To order the 150 mm (6 in) cable with a 4-pin M8 QD model, add the suffix Q to the model number. For example, Q126EQ . - To order the 150 mm (6 in) cable with a 4-pin M12 QD model, add the suffix Q5 to the model number. For example Q126EQ5 . page 4 of 14 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 06-May-25 Q12 Series Sensor ## Chapter Contents Wiring ................................................................................................................................................................................................................... 5 ## Chapter 2 ## Indicator Features **==> picture [4 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> 1<br>**----- End of picture text -----**<br> ## 1 - Amber and green LEDs - Green on: the power to the sensor is on - • Amber on: received signal • Amber flashing: marginal signal ## Wiring Emitters have no connection to black and white. CAUTION: Observe proper ESD precautions (grounding) when connecting QD models. **==> picture [487 x 223] intentionally omitted <==** **----- Start of picture text -----**<br> Emitters Bipolar Models, Light Operate PNP Models, Light Operate NPN Models, Light Operate<br>bn (1) + bn (1)bu (3) 10–30 V DC+– bn (1) 10–30 V DC+ bu (3) 10–30 V DC–<br>10–30 V DC wh (2) bu (3) – bn (1) +<br>bu (3) – Load bk (4) Load bk (4) Load<br>bk (4) Load<br>Bipolar Models, Dark Operate PNP Models, Dark Operate NPN Models, Dark Operate<br>[= [acer [tS [tS<br>bn (1)bu (3)wh (2) 10–30 V DC+– bn (1)bu (3) 10–30 V DC+– bu (3)bn (1) 10–30 V DC–+<br>Load bk (4) Load bk (4) Load<br>bk (4) Load<br>Sr<br>Key 3-pin M8 Male QD tS 4-pin M8 Male QD [tS 4-pin M12 Male QD<br>1 = Brown2 = White 4 2 4 2 1<br>3 = Blue<br>4 = Black 1 3 1 3 4<br>eS 3<br>**----- End of picture text -----**<br> © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 5 of 14 06-May-25 Q12 Series Sensor ## Chapter Contents FCC Part 15 Class A for Unintentional Radiators................................................................................................................................................. 7 Industry Canada ICES-003(A).............................................................................................................................................................................. 7 Dimensions........................................................................................................................................................................................................... 7 Q12 Retroreflective Mode Performance Curves .................................................................................................................................................. 8 Q12 Opposed Mode Performance Curves........................................................................................................................................................... 8 Q12 Fixed-Field Performance Curves.................................................................................................................................................................. 9 ## Chapter 3 ## Specifications ## Supply Voltage and Current 10 to 30 V DC (10% maximum ripple) at 20 mA maximum current Sensing Beam 640 nm visible red Supply Protection Circuitry Protected against reverse polarity and transient voltages ## Sensing Range Opposed Mode Models: 2 m (6.5 ft) Polarized Retroreflective Mode Models: 1 m (40 in) Retroreflective Mode Models: 1.5 m (59 in) Fixed Field FF15 Models: 15 mm (0.6 in) cutoff, 10 mm (0.4 in) focus Fixed Field FF30 Models: 30 mm (1.2 in) cutoff, 16 mm (0.63 in) focus Fixed Field FF50 Models: 50 mm (2 in) cutoff; 16 mm (0.63 in) focus Output Configuration ## Connections Standard Models: 2 m (6.5 ft) attached PVC cable, or 150 mm (6 in) pigtail with M8 or M12 threaded connection, depending on the model ordered ## Conditions Operating Temperature: –20 °C to +55 °C (–4 °F to +131°F) Storage Temperature: –30 °C to +75 °C (–22 °F to +167 °F) 95% at +50 °C maximum relative humidity (non-condensing) ## Environmental Rating Standard Models: IEC IP67 Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN Bipolar (1 NPN and 1 PNP) solid-state output or Single output (PNP or NPN), LO or DO, depending on model Repeatability 125 microseconds Switching Frequency Opposed Mode: 385 Hz LP/LV Mode: 715 Hz FF Mode: 590 Hz ## Output Protection Circuitry Protected against false pulse on power-up, short-circuit protected ## Output Response Time Opposed Mode: 1.3 ms ON; 900 µs OFF LP/LV Mode: 700 µs ON/OFF FF Mode: 850 µs ON/OFF NOTE: 120 ms delay on power-up; outputs do not conduct during this time. Output Ratings OFF-state leakage current for NPN: 200 µA; PNP: 10 µA ON-state saturation voltage for NPN: 2 V at 50 mA; PNP: 2 V at 50 mA ## Indicators One Yellow and one Green LED (see Figure 1) ## Construction Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. **==> picture [208 x 68] intentionally omitted <==** **----- Start of picture text -----**<br> ||||| |---|---|---|---| |Supply|Supply| |Required Overcurrent|Required Overcurrent| |Wiring|Wiring| |Protection (A)|Protection (A)| |(AWG)|(AWG)| |20|5.0|26|1.0| |22|3.0|28|0.8| |24|1.0|30|0.5| **----- End of picture text -----**<br> Polarized Retro Models: Polyamide housing with glass lens All Other Standard Models: Polyamide housing with polycarbonate lens © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 6 of 14 06-May-25 Q12 Series Sensor Specifications ## FCC Part 15 Class A for Unintentional Radiators This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. (Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ## Industry Canada ICES-003(A) This device complies with CAN ICES-3 (A)/NMB-3(A). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme NMB-3(A). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. ## Dimensions **==> picture [63 x 7] intentionally omitted <==** **----- Start of picture text -----**<br> Standard Models<br>**----- End of picture text -----**<br> **==> picture [47 x 51] intentionally omitted <==** **==> picture [140 x 25] intentionally omitted <==** **----- Start of picture text -----**<br> 12.4 mm<br>M3 mounting<br>(0.49") screws included<br>**----- End of picture text -----**<br> **==> picture [28 x 21] intentionally omitted <==** **----- Start of picture text -----**<br> 8.0 mm<br>(0.31")<br>**----- End of picture text -----**<br> **==> picture [425 x 193] intentionally omitted <==** **----- Start of picture text -----**<br> 15.0 mm Polarized Retro 4.7 mm<br>(0.59") Models (0.19")<br>Emitter (opposed mode models)<br>5.1 mm<br>23.1 mm (0.20")<br>(0.91") 22 mm<br>(0.86")<br>3.4 mm Emitter (all other models)<br>3.5 mm (0.13")<br>(0.14")<br>Ø 3 mm (0.12")<br>max. torque<br>0.9 Nm (8 in-lbf)<br>**----- End of picture text -----**<br> © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 7 of 14 06-May-25 Q12 Series Sensor Specifications ## Q12 Retroreflective Mode Performance Curves Performance is based on the use of a model BRT-60X40C retroreflector. **==> picture [500 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> Polarized Retroreflective Retroreflective<br>Excess Gain Beam Pattern Excess Gain Beam Pattern<br>1000 1000<br>Q12.. Q12..<br>Polarized Retro 9 mm Polarized RetroQ12.. 0.3" Retroreflective 30 mm RetroreflectiveQ12.. 1.2"<br>100 6 mm 0.2" 100 20 mm 0.8"<br>3 mm 0.1" 10 mm 0.4"<br>0 0 0 0<br>3 mm 0.1" 10 mm 0.4"<br>10 6 mm 0.2" 10 20 mm 0.8"<br>9 mm 0.3" 30 mm 1.2"<br>0 0.3 m 0.6 m 0.9 m 1.2 m 1.5 m 0 0.3 m 0.6 m 0.9 m 1.2 m 1.5 m<br>1 12" 24" 35" 47" 59" 1 12" 24" 35" 47" 59"<br>0.01 m0.03' 0.1 m0.33' 1 m3.3' 10 m33' DISTANCE 0.01 m0.03' 0.1 m0.33' 1 m3.3' 10 m33' DISTANCE<br>DISTANCE DISTANCE<br>EXCESS GAIN EXCESS GAIN<br>**----- End of picture text -----**<br> ## Q12 Opposed Mode Performance Curves **==> picture [500 x 168] intentionally omitted <==** **----- Start of picture text -----**<br> Excess Gain Beam Pattern<br>1000<br>Q12..<br>Q12..<br>Opposed Mode 30 mm 1.2"<br>Opposed Mode<br>20 mm 0.8"<br>100<br>10 mm 0.4"<br>0 0<br>10 mm 0.4"<br>10 20 mm 0.8"<br>30 mm 1.2"<br>0 0.5 m 1 m 1.5 m 2 m 2.5 m<br>1 20" 40" 60" 80" 100"<br>0.01 m 0.1 m 1 m 10 m DISTANCE<br>0.033' 0.33' 3.3' 33'<br>DISTANCE<br>EXCESS GAIN<br>**----- End of picture text -----**<br> page 8 of 14 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 06-May-25 Q12 Series Sensor Specifications ## Q12 Fixed-Field Performance Curves Focus and spot sizes are typical. Performance based on use of 90% reflectance white test card.* **==> picture [500 x 246] intentionally omitted <==** **----- Start of picture text -----**<br> Fixed Field -- 15 mm Fixed Field -- 30 mm Fixed Field -- 50 mm<br>1000 1000 1000<br>Q12..FF15 Q12..FF30 Q12..FF50<br>Fixed-Field Mode<br>Fixed-Field Fixed-Field 100<br>100 100<br>10<br>10 10<br>1<br>1 mm 10 mm 100 mm 1000 mm<br>0.04" 0.4" 4.0" 40.0"<br>1 1<br>DISTANCE<br>1 mm 10 mm 100 mm 1000 mm 1 mm 10 mm 100 mm 1000 mm<br>0.04" 0.4" 4.0" 40.0" 0.04" 0.4" 4.0" 40.0"<br>DISTANCE DISTANCE<br>Ø 0.4 mm spot size at 10 mm focus Ø 0.5 mm spot size at 16 mm focus Ø 0.5 mm spot size at 16 mm focus<br>Ø 1.5 mm spot size at 15 mm cutoff Ø 3.0 mm spot size at 30 mm cutoff Ø 6.5 mm spot size at 50 mm cutoff<br>* Using the 18% gray test card the cutoff distance * Using the 18% gray test card the cutoff distance * Using the 18% gray test card the cutoff distance<br>will be 95% of the value shown. Using the 6% will be 90% of the value shown. Using the 6% will be 80% of the value shown. Using the 6%<br>black test card the cutoff distance will be 90% of black test card the cutoff distance will be 80% of black test card the cutoff distance will be 60% of<br>the value shown. the value shown. the value shown.<br>EXCESS GAIN<br>EXCESS GAIN EXCESS GAIN<br>**----- End of picture text -----**<br> © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 9 of 14 06-May-25 Q12 Series Sensor ## Chapter Contents Cordsets ............................................................................................................................................................................................................. 10 Brackets ..............................................................................................................................................................................................................11 Sensor Status Indicators .....................................................................................................................................................................................11 Apertures.............................................................................................................................................................................................................11 ## Chapter 4 Accessories ## Cordsets **==> picture [480 x 472] intentionally omitted <==** **----- Start of picture text -----**<br> 3-pin Single-Ended Threaded M8 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>PKG3M-2 2 m (6.56 ft)<br>PKG3M-4 4 m (13.12 ft) 35 Typ.<br>PKG3M-5 5 m (16.4 ft) ø 9.5<br>PKG3M-7 7 m (22.96 ft)<br>Straight Som M8 x 1<br>PKG3M-9 9 m (29.52 ft)<br>4.3 mm Dia<br>PKG3M-10 10 m (32.81 ft) QS 7 mm<br>58 mm 4<br>3 1<br>PKW3M-2 2 m (6.56 ft)<br>28 Typ.<br>PKW3M-5 5 m (16.40 ft) 1 = Brown<br>r 3 = Blue<br>4 = Black<br>20 Typ.<br>aeom<br>Right-Angle M8 x 1<br>ø 9.5 +<br>PKW3M-9 9 m (29.53 ft) 4.3 mm Dia<br>QS 7 mm<br>58 mm<br>4-Pin Threaded M8 Cordsets—Single Ended<br>Model Length Style Dimensions Pinout (Female)<br>PKG4M-2 2.04 m (6.68 35 Typ.<br>ft)<br>4 2<br>PKG4M-5 5 m (16.4 ft) Straight ø 9.5<br>3 1<br>PKG4M-9 9.04 m (29.6 ft) ar M8 x 1 @<br>1 = Brown<br>2 = White<br>PKW4M-2 2 m (6.56 ft) 28 Typ. 3 = Blue<br>4 2 4 = Black<br>PKW4M-5 5 m (16.4 ft)<br>20 Typ. 3 1<br>Right Angle<br>Ee| ot =_<br>PKW4M-9 9 m (29.5 ft)<br>M8 x 1<br>ø 9.5 + ~<br>**----- End of picture text -----**<br> © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 10 of 14 06-May-25 Q12 Series Sensor Accessories **==> picture [500 x 171] intentionally omitted <==** **----- Start of picture text -----**<br> 4-Pin Threaded M12 Cordsets—Single Ended<br>Model Length Style Dimensions Pinout (Female)<br>MQDC-406 2 m (6.56 ft) 44 Typ.<br>2<br>MQDC-415 5 m (16.4 ft) 1<br>Straight 3<br>MQDC-430 9 m (29.5 ft) M12 x 1 4 5<br>MQDC-450 15 m (49.2 ft) ø 14.5 1 = Brown<br>2 = White<br>MQDC-406RA 2 m (6.56 ft) 32 Typ. 3 = Blue<br>MQDC-415RA 5 m (16.4 ft) [1.26"] 2 3 4 = Black5 = Unused<br>MQDC-430RA 9 m (29.5 ft) Right-Angle 30 Typ.[1.18"] 1 4<br>MQDC-450RA 15 m (49.2 ft) M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br> ## Brackets **==> picture [500 x 173] intentionally omitted <==** **----- Start of picture text -----**<br> 4 X<br>SMBQ12T Ø3.3<br>• Right-angle bracket<br>• 20-ga. 300 series stainless steel<br>34<br>Hole center spacing: A to B = 7.6<br>Hole size: A = 3.5 x 8.1, B=ø 3.2<br>34<br>11<br>SMBQ12A Ø3.3<br>• Adjustable right-angle bracket<br>• 20-ga. 300 series stainless steel 34 Ø3.2<br>Hole center spacing: A to B = 7.6<br>Hole size: A = 3.5 x 8.1, B=ø 3.2 34<br>11<br>**----- End of picture text -----**<br> ## Sensor Status Indicators **==> picture [500 x 100] intentionally omitted <==** **----- Start of picture text -----**<br> S15L Series In-Line Sensor Status Indicator<br>Model Input LED Color Dimensions Female Male Wiring<br>Type<br>S15LGYPQ PNP 57.8[2.27] 1 1 = Brown, 10 to 30 V DC<br>Power ON = 27.9 2 2 2 = White<br>Green [1.1] 1<br>4<br>S15LGYNQ NPN Input Active = Yellow 15.0[0.59] 4 3 3 3 = Blue, DC common<br>4 = Black, Sensor Input<br>**----- End of picture text -----**<br> ## Apertures Opposed-mode sensors (standard models only) may be fitted with apertures to narrow or shape the sensor’s effective beam to more closely match the size or profile of the objects being sensed. A common example is using “line” (or “slot”) type apertures to sense thread. NOTE: The use of apertures will reduce the sensing range (see table below). © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 11 of 14 06-May-25 Q12 Series Sensor Accessories **==> picture [355 x 252] intentionally omitted <==** **----- Start of picture text -----**<br> ||||| |---|---|---|---| |Model|Description|Pieces|Reduced Sensor Range| |(Two Apertures Used)| |Circular| |APQ12-.5|0.5 mm (0.02 in) diameter|10|60 mm (2.4 in)| |APQ12-1|1 mm (0.04 in) diameter|10|190 mm (7.5 in)| |APQ12-1.5|1.5 mm (0.06 in) diameter|10|400 mm (15.7 in)| |APQ12-2|2 mm (0.08 in) diameter|10|725 mm (28.5 in)| |Horizontal Slot| |APQ12-.5H|0.5 mm (0.02 in)|10|350 mm (13.8 in)| |APQ12-1H|1 mm (0.04 in)|10|725 mm (28.5 in)| |Vertical Slot| |APQ12-.5V|0.5 mm (0.02 in)|10|450 mm (17.7 in)| |APQ12-1V|1 mm (0.04 in)|10|900 mm (35.4 in)| |Protective Jacket| |APQ12-4S|4 mm (0.16 in) square|10|2000 mm (78.7 in)| |APKQ12|Kit containing two of each|18|—| |aperture above| **----- End of picture text -----**<br> page 12 of 14 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 06-May-25 Q12 Series Sensor ## Chapter Contents Clean with Mild Detergent and Warm Water ...................................................................................................................................................... 13 Repairs ............................................................................................................................................................................................................... 13 Contact Us.......................................................................................................................................................................................................... 13 Banner Engineering Corp Limited Warranty....................................................................................................................................................... 13 ## Chapter 5 Product Support and Maintenance ## Clean with Mild Detergent and Warm Water Handle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc. create stray light that may degrade the peak performance of the sensor. Wipe down the device with a soft cloth dampened with a mild detergent and warm water solution. Do not use any other chemicals for cleaning. ## Repairs Contact Banner Engineering for troubleshooting of this device. Do not attempt any repairs to this Banner device; it contains no field-replaceable parts or components. If the device, device part, or device component is determined to be defective by a Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure. IMPORTANT: If instructed to return the device, pack it with care. Damage that occurs in return shipping is not covered by warranty. ## Contact Us Banner Engineering Corp. headquarters is located at: 9714 Tenth Avenue North | Plymouth, MN 55441, USA | Phone: + 1 888 373 6767 For worldwide locations and local representatives, visit www.bannerengineering.com. ## Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 13 of 14 06-May-25 ## LinkedIn ## X (formerly Twitter) ## Facebook © 2025. All rights reserved. www.bannerengineering.com
Updated at April 28, 2026
Founded in 1966, Banner Engineering is a globally recognized leader in the design and manufacture of industrial automation products. The company is renowned for developing innovative, high-quality solutions that improve operational efficiency, safeguard personnel, and optimize manufacturing processes across a diverse range of industries. Our extensive selection of Banner Engineering components prominently features their industry-leading sensing technologies. We offer a comprehensive array of precision light sensors engineered for accurate detection and measurement in demanding environments. Complementing this core sensing portfolio is a robust offering of automation signaling devices, including visual signal indicator units and essential accessories, which provide clear and immediate communication of machine status. Beyond primary sensing and indication solutions, our range encompasses critical components for broader process control and machine safety. This includes advanced process controllers, reliable pressure sensors and transducers, and dependable safety relays. Supported by a variety of purpose-built sensor accessories and fiber optic lead assemblies, Banner Engineering delivers the durable, high-performance technologies required to build and maintain sophisticated automated systems.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →