Image not available
Illustrative purposes only
DPS-1-480-24
AC/DC DIN Rail Power Supply (PSU), Active PFC, ITE, 1 Output, 480 W, 24 VDC, 20 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: IMO PRECISION CONTROLS
- Product type: AC / DC DIN Rail Mount Power Supplies
- Product Range: DPS Series
- No. of Outputs: 1 Output
- Output Power Max: 480W
- Input Voltage VAC: 90V AC to 264V AC
- Input Voltage AC Max: 264VAC
- Input Voltage AC Min: 90VAC
- Power Supply Approvals: ITE
- Power Supply Output Type: Fixed
- Output Current - Output 1: 20A
- Output Voltage - Output 1: 24VDC
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 164.94 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies AC - DC din rail mountable 5W, 10W and 18W class 2 power supplies z UL, cUL, CE z Universal input 90~265VAC z High efficiency up to 72% - z Short circuit protection z Internal input filter z 3 Year warranty ## **Specificaton** |**Model**|**DPS-1-005-24**||**DPS-1-010-24**|**DPS-1-018-24**| |---|---|---|---|---| |Input Voltage|||90~265VAC|| |Output Wattage|5W||10W|18W| |Output Voltage||24VDC|24VDC(Other output voltages available on request)|| |Output Current|210mA||420mA|750mA| |Efficiency (min/typ)|70/72%||74/76%|75/77%| |**General Specification**||||| |Switchingfrequency|||100kHz|| |Isolation voltage|||3000VAC|| |Isolation resistance|||100MΩ@ 500VDC|| |Ambient temperature|||-10 to +71°C|| |Derating (from 61 to 71°C)|2.5%/°C||3%/°C|3%/°C| |Storage temperature|||-25 to +85°C|| |Relative humidity|||20 to 95% RH|| |Cooling|||Free air convection|| |Dimensions|||L90 x W22.5 x D115 mm|| |Weight|115g||120g|150g| |Case material|||Plastic|| |**Input Specifications**||||| |Rated input voltage|||100 to 240VAC|| |Input voltage range|||90 to 265VAC, 120 to 370VDC|| |Line frequency|||47 to 63Hz|| |Inrush current|||10A @ 115VAC, 18A @ 230VAC|| |**Output Specifications**||||| |Output voltage accuracy|||±1%|| |Minimum load|||0%|| |Line regulation|||±1%|| |Load regulation|||±2%|| |Transient recoverytime|||300µS @ 50% load, stepchanged|| |Temperature coefficient|||±0.02%/°C|| |Ripple & noise|||50mV|| |Hold uptime||30mS @ 115VAC, 130mS @ 230VAC||| |Voltage trim range|||-10 to +20%|| |DC ON indicator threshold at start up|||21.6VDC|| |DC LOW indicator threshold after start up|||18 to 21.6VDC|| |**Control and Protection**||||| |Input fuse|||T2A / 250VAC internal|| |Rated over loadprotection|||110 to 135%|| |Over voltageprotection|||125 to 145%|| |Output short circuit|||Hiccupmode|| |**Approvals and Standards**|||CE, UL/cUL|| www.imopc.com DPS-1-05-10-18/07/07 ## DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies **==> picture [92 x 40] intentionally omitted <==** ## **Dimensions** (mm) **==> picture [510 x 185] intentionally omitted <==** **----- Start of picture text -----**<br> Key Description 22.5 115<br>V+ (1) Positive output terminal 2 1<br>V- (2) Negative output terminal<br> (3) Gro und this ter minal to minimize high-frequency emissions<br>N (4) Input terminals (neutral conductor, no polarity at DC input) V- V+<br>DC Output<br>L (5) Input terminals (phase conductor, no polarity at D C input)<br>ON Operation indicator LED LO<br>ON<br>LO DC LOW indicator LED<br>Vout adj. Trimmer-potentiometer for Vout adjustment<br>Vout adj.<br>Construction Installation<br>Easy, safe and secure Ventilation/Cooling<br>snap-on, snap-off Normal convection N L<br>DIN-Rail mounting All sides 25mm free space<br>( TS 35/7.5 or TS35/15) for cooling recommended<br>3 4 5<br>90<br>**----- End of picture text -----**<br> ~~**Terminal size range**~~ 2 Solid:0.2- ~~2.0mm (AWG24-14)~~ (use copper conductors only) ## **Derating** **==> picture [460 x 151] intentionally omitted <==** **----- Start of picture text -----**<br> 100 100<br>75<br>70<br>DPS-1-05 DPS-1-10<br>DPS-1-18<br>0 0<br>-10 61 71 -10 61 71<br>Temperature (°C) Temperature (°C)<br>Power out (%) Power out (%)<br>**----- End of picture text -----**<br> ## **Connections** **==> picture [372 x 141] intentionally omitted <==** **----- Start of picture text -----**<br> L Fuse Vo+<br>Inrush Current<br>Lin e Limi ter a nd Switching Rectifier<br>Filter Device Current<br>Rectifier<br>N Detection Vo-<br>Y<br>Control<br>Opto- R ef er ence &<br>Isolation Error Amp.<br>Vout ad j.<br>Opto- Over Voltage<br>Isolation D etection<br>DC ON<br>Output Level (Green LE D)<br>Detectio n DC LOW<br>(Red LE D)<br>**----- End of picture text -----**<br> www.imopc.com DPS-1-05-10-18/07/07 ## DPS Series 30W, 60W AC/DC DIN Rail Power Supplies ## AC - DC DIN rail mountable 30W and 60W class 2 power supplies **==> picture [46 x 22] intentionally omitted <==** **----- Start of picture text -----**<br> EARGUARANTE<br>Y E<br>**----- End of picture text -----**<br> z UL, cUL, CE z Universal input 85~264VAC z High efficiency z Short circuit protection z Internal input filter z 3 Year warranty ## **Specificaton** |**Model**|**DPS-1-030-24**|**DPS-1-030-24**|||**DPS-1-060-24**| |---|---|---|---|---|---| |Input Voltage||85~264VAC|||| |Output Wattage|30W||||60W| |Output Voltage|24VDC(Other output voltages available on request)||||| |Output Current|1250mA||||2500mA| |Efficiency (min/typ)|83/86%||||86/89%| |**General Specification**|||||| |Isolation voltage||3000VAC|||| |Isolation resistance||100MΩ@ 500VDC||@ 500VDC|| |Ambient temperature||-10 to +71°C|||| |Derating (from 61 to 71°C)||2.5%/°C|||| |Storage temperature||-25 to +85°C|||| |Relative humidity||20 to 90% RH|||| |Cooling||Free air convection|||| |Dimensions||L90 x W40.5 x D115 mm|||| |Weight|290g||||360g| |Case material||Plastic|||| |**Input Specifications**|||||| |Rated input voltage||100 to 240VAC|||| |Input voltage range||85 to 264VAC, 90 to 375VDC|85 to 264VAC, 90 to 375VDC||| |Line frequency||47 to 63Hz|47 to 63Hz||| |Inrush current|20A @ 115VAC, 40A @ 230VAC|20A @ 115VAC, 40A @ 230VAC||30A @ 115VAC, 60A @ 230VAC|30A @ 115VAC, 60A @ 230VAC| |**Output Specifications**|||||| |Output voltage accuracy||±1%|||| |Minimum load||0%|||| |Line regulation||0.5%|||| |Load regulation||0.5%|||| |Turn on time|1000mS after AC applied to input at full resistive load||||| |Voltage fall time||150mS|||| |Voltage rise time||150mS at full resistive load|150mS at full resistive load||| |Hold uptime||20mS @ 115VAC, 30mS @ 230VAC|20mS @ 115VAC, 30mS @ 230VAC|20mS @ 115VAC, 30mS @ 230VAC|| |Temperature coefficient||±0.02%/°C|||| |Ripple & noise||50mV|||| |Voltage trim range||24 to 28VDC|||| |DC ON indicator threshold at start up||19.2VDC|||| |**Control and Protection**|||||| |Rated over loadprotection|110 to 140%||||110 to 150%| |Over voltageprotection||30 to 33VDC|||| |Output short circuit||Fold forward|||| |**Approvals and Standards**||CE, UL/cUL|||| www.imopc.com DPS-1-30-60/07/07 ## DPS Series 30W, 60W AC/DC DIN Rail Power Supplies **==> picture [92 x 40] intentionally omitted <==** ## **Dimensions** (mm) ## **Pin connections** **==> picture [301 x 187] intentionally omitted <==** **----- Start of picture text -----**<br> 40.5 115<br>5 4 3 2 1<br>- - + +Rdy<br>Vout adj.<br>DC ON<br>N L<br>6 7 8<br>90<br>**----- End of picture text -----**<br> ## **Key Description** Rdy (1) DC OK output for relay (24V models only) - + (2) Positive output terminal - ~~+ (3) Positi~~ ve output terminal - ~~(4) Negative outpu~~ t terminal - (5) Negative output terminal - ~~(6) Ground ter~~ minal to minimize high-frequency emissions - N (7) Input terminals (neutral conductor, no polarity at DC input) L (8) Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED Vout adj. Trimmer-potentiometer for Vout adjustment ## **Construction** ## **Installation** **Ventila** ~~**tion/Coolin**~~ **g** Easy, safe and secure Normal convection snap-on, snap-off All sides 25mm free space DIN-Rail mounting for cooling recommended (TS35/7.5 or TS35/15) ~~**Termina**~~ **l** ~~**size range**~~ 2 Solid:0.2-2.0mm (AWG24-14) (use copper conductors only) ## **Connections** **==> picture [501 x 182] intentionally omitted <==** **----- Start of picture text -----**<br> RL >700Ω<br>R dy<br>L Fuse Vo+<br>Inrush Current<br>Line Limiter and Switching Rectifier<br>Filter Device Current<br>Rectifier<br>N Detection Vo-<br>-Vout<br>Y PWM<br>Controller Opto- Refer ence & a) Relay<br>Isolation Error Amp.<br>Vout adj.<br>Rdy 2.2K<br>DC ON 0.5W<br>Output Le vel (Green LED)<br>Detectio n RDY(Open 5.1K<br>*2 4V mo dels only Collector)* -Vout 0.3W<br>b) 5V signal<br>**----- End of picture text -----**<br> ## **Derating** **Rdy connections** **==> picture [220 x 147] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>75<br>0<br>-10 61 71<br>Temperature (°C)<br>Power out (%)<br>**----- End of picture text -----**<br> www.imopc.com DPS-1-30-60/07/07 ## DPS Series 120W AC/DC DIN Rail Power Supplies AC - DC DIN rail mountable 120W power supplies **==> picture [46 x 22] intentionally omitted <==** **----- Start of picture text -----**<br> EARGUARANTE<br>Y E<br>**----- End of picture text -----**<br> ## z Compact design - z High efficiency up to 86% - z PFC function available - z Parallel function available (switch) - z Input voltage 115/230VAC auto select - z 3 Year warranty ## **Specificaton** |**Model**||**DPS-1-120-24**|**Input Specifications**| |---|---|---|---| |Input Voltage||115/230VAC|Rated input voltage| |Output Wattage||120W|Input voltage range| |Output Voltage|24VDC|24VDC(Other output voltages available on request)|Rated input current| |Output Current||5A|Line frequency| |Efficiency (min/typ)||84/86%|Inrush current| |**General Specification**|||PFC| |Isolation voltage||3000VAC|**Output Specifications**| |Isolation resistance||100MΩ@ 500VDC|Output voltage accurac| |Ambient temperature||-25 to +71°C|Minimum load| |Derating (from 61 to 71°C)||2.5%/°C|Line regulation| |Storage temperature||-25 to +85°C|Load regulation| |Relative humidity||20 to 95% RH|Hold uptime| |Cooling||Free air convection|Temperature coefficient| |Dimensions||L123.6 x W63.2 x D123.6 mm|Ripple & noise| |Weight||920g|Voltage trim range| |Case material||Metal|DC ON indicator threshold at start u| |**Input Specifications**||| |---|---|---| |Rated input voltage||115/230VAC| |Input voltage range|115V: 90 to 132VAC, 230V: 186 to 264VDC|| |Rated input current||2.8/1.4A| |Line frequency||47 to 63Hz| |Inrush current|24A @ 115VAC, 48A @ 230VAC|| |PFC||0.7 @ 230VAC| |**Output Specifications**||| |Output voltage accuracy|0 to 1%|0 to 1%(adjustedpre-shipment)| |Minimum load||0%| |Line regulation||±0.5%| |Load regulation|±1% single mode, ±5%parallel mode|| |Hold uptime|25mS @ 115VAC, 30mS @ 230VAC|| |Temperature coefficient||±0.3%/°C| |Ripple & noise||50mV| |Voltage trim range||22.5 to 28.5VDC| |DC ON indicator threshold at start u|DC ON indicator threshold at start up|17.6 to 19.4VDC| |DC LO indicator threshold after start up||17.6 to 19.4VDC| |Parallel operation||upto 3 units| |**Control and Protection**||| |Input fuse||T3.15A/250VAC internal| |Rated over loadprotection||110 to 145%| |Power Rdy (24V model only)|Power Rdy (24V model only)<br>Electrical isolation: 500VDC|| |Threshold volt. contact closed (start up): 17.6 to 19.4VDC||| ||Contact rating: 0.3A @ 60VDC|| |Over voltageprotection||125 to 145%| |Output short circuit||Current limited| |**Approvals and Standards**||CE, UL/cUL| www.imopc.com DPS-1-120/07/07 ## DPS Series 120W AC/DC DIN Ra ~~il Powe~~ r Supplies **==> picture [92 x 40] intentionally omitted <==** ## **Dimensions** (mm) ## **Pin connections** **==> picture [218 x 169] intentionally omitted <==** **----- Start of picture text -----**<br> 116.6 7.0<br>6 1<br>S - - ++ Rdy<br>P<br>Vout adj.<br>DC LO<br>DC ON<br>L N<br>63.2<br>7 9<br>123.6<br>**----- End of picture text -----**<br> ## **Derating** ## **Key Description** - Rdy(1,2) DC ON output for relay (24V models only) ~~+ (~~ 3) P ~~ositive output terminal~~ - + (4) Positive output terminal - (5) Negative output terminal - (6) Negative output terminal - (7) Ground terminal to minimize high-frequency emissions L (8) Inp ~~ut terminals (ph~~ ase conductor, no polarity at DC input) N (9) Inp ~~ut terminals (neutral c~~ onductor, no polarity at DC input) DC ON Operation indicator LED ~~DC LO~~ DC ~~low voltage indi~~ cator LED Vout adj. Trimmer-potentiometer for Vout adjustment S/P Single/Parallel select switch ## **Construction** ## **Installation** **Ventilation/Cooling** Easy, safe and secure Normal convection snap-on, snap-off All sides 25mm free space DIN-Rail mounting for cooling recommended (TS35/7.5 or TS35/15) **Screw Termina** ~~**l**~~ **==> picture [221 x 151] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>75<br>0<br>-25 61 71<br>Temperature (°C)<br>Power out (%)<br>**----- End of picture text -----**<br> 10-24AWG flexibl ~~e~~ /solid cable Strip cable ends by 8mm ## **Connections** **==> picture [472 x 167] intentionally omitted <==** **----- Start of picture text -----**<br> L Fuse Inr ush Current Vo+<br>Filter Limiter, Rectifier PFC Smoothing Switching Rectifier<br>and Auto Select Circuit Circuit Device Current<br>N 115/230VAC Detection Vo-<br>Y PWM Single/Parallel<br>Controller Opto- Refere nce & Select<br>Isolation Err or Amp.<br>Vout adj.<br>Opto- Over V oltage<br>Isolation De te ction<br>DC ON (Green LED)<br>Output Level<br>Detectio n DC LO (Red LED)<br>RDY (Relay Contact)*<br>*24V models only<br>**----- End of picture text -----**<br> www.imopc.com DPS-1-120/07/07 ## DPS Series 240W AC/DC DIN Rail Power Supplies AC - DC DIN rail mountable 240W power supplies SSLSS 3) ## z Compact design z High efficiency up to 89% - z PFC function available - z Parallel function available (switch) - z Input voltage 115/230VAC auto select - z 3 Year warranty ## **Specificaton** |**Model**|**DPS-1-240-24**| |---|---| |Input Voltage|115/230VAC| |Output Wattage|240W| |Output Voltage|24VDC| |Output Current|10A| |Efficiency (min/typ)|87/89%| |**General Specification**|| |Isolation voltage|3000VAC| |Isolation resistance|100MΩ@ 500VDC| |Ambient temperature|-10 to +71°C| |Derating (from 61 to 71°C)|2.5%/°C| |Storage temperature|-25 to +85°C| |Relative humidity|20 to 95% RH| |Cooling|Free air convection| |Dimensions|L125 x W83 x D126 mm| |Weight|1000g| |Case material|Metal| |**Input Specifications**||| |---|---|---| |Rated input voltage||115/230VAC| |Input voltage range|115V: 93 to 132VAC, 230V: 186 to 264VDC|| |Rated input current||5.4/2.2A| |Line frequency||47 to 63Hz| |Inrush current|30A @ 115VAC, 60A @ 230VAC|| |PFC||0.7 @ 230VAC| |**Output Specifications**||| |Output voltage accuracy|0 to 1%|0 to 1%(adjustedpre-shipment)| |Minimum load||0%| |Line regulation||±0.5%| |Load regulation|±1% single mode, ±5%parallel mode|| |Hold uptime|25mS @ 115VAC, 30mS @ 230VAC|| |Temperature coefficient||±0.02%/°C| |Ripple & noise||100mV| |Voltage trim range||22.5 to 28.5VDC| |DC ON indicator threshold at start u|DC ON indicator threshold at start up|17.6 to 19.4VDC| |DC LO indicator threshold after start up||17.6 to 19.4VDC| |Parallel operation||upto 3 units| |**Control and Protection**||| |Input fuse||T6.3A/250VAC internal| |Rated over loadprotection||120 to 145%| |Power Rdy|Electrical isolation: 500VDC|| |Threshold volt. contact closed (start up): 17.6 to 19.4VDC||| ||Contact rating: 0.3A @ 60VDC|| |Over voltageprotection||120 to 145%| |Output short circuit||Current limited| |**Approvals and Standards**||CE, UL/cUL| www.imopc.com DPS-1-240/07/07 ## DPS Series 240W AC/DC DIN Rail ~~Power S~~ upplies **==> picture [92 x 40] intentionally omitted <==** ## **Dimensions** (mm) ## **Pin connections** **==> picture [246 x 172] intentionally omitted <==** **----- Start of picture text -----**<br> 116 10<br>6 1<br>S - - ++ Rdy<br>P<br>Vout adj.<br>DC LO<br>DC ON<br>L N<br>83<br>7 9<br>125<br>**----- End of picture text -----**<br> ## **Derating** **==> picture [221 x 151] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>75<br>0<br>-10 61 71<br>Temperature (°C)<br>Power out (%)<br>**----- End of picture text -----**<br> ## **Key Description** Rdy(1,2) DC ON output for relay (24V models only) ~~+ (~~ 3) P ~~ositive output terminal~~ + (4) Positive output terminal - (5) Negative output terminal - (6) Negative output terminal (7) Ground terminal to minimize high-frequency emissions L (8) Inp ~~ut terminals (ph~~ ase conductor, no polarity at DC input) N (9) Inp ~~ut terminals (neutral c~~ onductor, no polarity at DC input) DC ON Operation indicator LED ~~DC LO~~ DC ~~low voltage indi~~ cator LED Vout adj. Trimmer-potentiometer for Vout adjustment S/P Single/Parallel select switch ## **Construction** ## **Installation** **Ventilation/Cooling** Easy, safe and secure Normal convection snap-on, snap-off All sides 25mm free space DIN-Rail mounting for cooling recommended (TS35/7.5 or TS35/15) **Screw Termina** ~~**l**~~ 10-24AWG flexibl ~~e~~ /solid cable Strip cable ends by 8mm ## **Connections** **==> picture [472 x 167] intentionally omitted <==** **----- Start of picture text -----**<br> L Fuse Inr ush Current Vo+<br>Filter Limiter, Rectifier PFC Smoothing Switching Rectifier<br>and Auto Select Circuit Circuit Device Current<br>N 115/230VAC Detection Vo-<br>Y PWM Single/Parallel<br>Controller Opto- Refere nce & Select<br>Isolation Err or Amp.<br>Vout adj.<br>Opto- Over V oltage<br>Isolation De te ction<br>DC ON (Green LED)<br>Output Level<br>Detectio n DC LO (Red LED)<br>RDY (Relay Contact)*<br>*24V models only<br>**----- End of picture text -----**<br> www.imopc.com DPS-1-240/07/07 ## DPS Series 480W AC/DC DIN Rail Power Supplies AC - DC DIN rail mountable 480W power supplies **==> picture [46 x 22] intentionally omitted <==** **----- Start of picture text -----**<br> EARGUARANTE<br>Y E<br>**----- End of picture text -----**<br> z Compact design z High efficiency up to 89% - z PFC function available - z Parallel function available (switch) - z Universal input voltage z 3 Year warranty ## **Specificaton** |**Model**|**DPS-1-480-24**| |---|---| |Input Voltage|90~264VAC| |Output Wattage|480W| |Output Voltage|24VDC| |Output Current|20A| |Efficiency (min/typ)|86/89%| |**General Specification**|| |Isolation voltage|3000VAC| |Isolation resistance|100MΩ@ 500VDC| |Ambient temperature|-25 to +71°C| |Derating (from 56 to 71°C)|2.5%/°C| |Storage temperature|-25 to +85°C| |Relative humidity|20 to 95% RH| |Cooling|Free air convection| |Dimensions|L125 x W175 x D123 mm| |Weight|1920g| |Case material|Metal| ## **Input Specifications** |**Input Specificationsput Specificationsut Specificationspecificationsecifications**||| |---|---|---| |Rated input voltage||115/230VAC| |Input voltage range|90 to 264VAC(230VAC typ.), 120 to 370VDC|| |Rated input current|7A @ 115VAC, 3.5A @ 230VAC|| |Line frequency||47 to 63Hz| |Inrush current|25A @ 115VAC, 50A @ 230VAC|| |PFC||0.99 @ 230VAC| |**Output Specifications**||| |Output voltage accuracy|0 to 1%(adjustedpre-shipment)|| |Minimum load||0%| |Line regulation||±0.5%| |Load regulation|±0.5% single mode, ±5%parallel mode|| |Hold uptime||30mS| |Temperature coefficient||±0.02%/°C| |Ripple & noise||100mV| |Voltage trim range||22.5 to 28.5VDC| |DC ON indicator threshold at start up||17.6 to 19.4VDC| |DC LO indicator threshold after start up<br>17.6 to 19.4VDC||| |Parallel operation||upto 3 units| |**Control and Protection**||| |Input fuse||10A/250VAC internal| |Rated over loadprotection||120 to 140%| |Power Rdy||Electrical isolation: 500VDC| |Threshold volt. contact closed (start up): 17.6 to 19.4VDC||Threshold volt. contact closed (start up): 17.6 to 19.4VDC| ||Contact rating: 0.3A @ 60VDC|| |Over voltageprotection||30 to 33V| |Output short circuit||Continuous current limited| |**Approvals and Standards**||CE, UL/cUL| www.imopc.com DPS-1-480/07/07 ## DPS Series 480 ~~W~~ AC/DC DIN Rai ~~l Power Suppli~~ es **==> picture [92 x 40] intentionally omitted <==** ## **Dimensions** (mm) **==> picture [331 x 173] intentionally omitted <==** **----- Start of picture text -----**<br> 116 7.0<br>DC ON DC LO<br>N L Rdy ++ - -<br>P<br>S<br>7 9 Vout adj.1 6<br>175<br>125<br>**----- End of picture text -----**<br> ## **Pin connections** **Key Description** Rdy(1,2) DC ON output for relay (24V models only) + (3) Positive output terminal + (4) Positive output terminal - (5) Negative output terminal ~~- (6)~~ Negative output terminal ~~~~ (7) Ground terminal to minimize high-frequency emissions N (8) Input terminals (neutral conductor, no polarity at DC input) L (9) Input terminals (phase conductor, no polarity at DC input) DC ON Operation indicator LED DC LO DC low voltage indicator LED Vout adj. Trimmer-potentiometer for Vout adjustment S/P Single/Parallel select switch ## **Derating** ## **Installation** ## **Ventilation/Cooling** **==> picture [221 x 150] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>62.5<br>0<br>-25 56 71<br>Temperature (°C)<br>Power out (%)<br>**----- End of picture text -----**<br> Normal convection All sides 25mm free space for cooling recommended ## **Screw Terminal** 10-24AWG flexible/solid cable Strip cable ends by 8mm ## **Construction** Easy, safe and secure snap-on, snap-off DIN-Rail mounting (TS35/7.5 or TS35/15) ## **Connections** **==> picture [472 x 154] intentionally omitted <==** **----- Start of picture text -----**<br> L Fuse Inr ush Current Vo+<br>Filter Limiter, Rectifier PFC Smoothing Switching Rectifier<br>and Auto Select Circuit Circuit Device Current<br>N 115/230VAC Detection Vo-<br>Y PWM Single/Parallel<br>Controller Opto- Refere nce & Select<br>Isolation Err or Amp.<br>Vout adj.<br>Opto- Over V oltage<br>Isolation De te ction<br>DC ON (Green LED)<br>Output Level<br>Detectio n DC LO (Red LED)<br>RDY (Relay Contact)*<br>**----- End of picture text -----**<br> *24V models only www.imopc.com DPS-1-480/07/07
Updated at February 9, 2023
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →