DP-102-E-P

Dual Display Digital Pressure Sensor For Gas 

735 

**DP-100 SERIES Ver.2** 

FIBER SENSORS ~~es~~ LASER SENSORS PHOTOELECTRIC SENSORS ~~a~~ MICRO PHOTOELECTRIC SENSORS AREA SENSORS ~~a~~ LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS ~~a~~ SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION ~~——~~ DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ ~~ed~~ Digital Display Pressure/ Head-separated Flow 

**==> picture [465 x 295] intentionally omitted <==**

**----- Start of picture text -----**<br>
■ General terms and conditions ............. F-7 ■ Sensor selection guide ................. P.731~<br>Related Information ■ Glossary of terms.......................... P.1469 ■ General precautions ..................... P.1472<br>|ee<br>■ Korea’s S-mark ............................. P.1506<br>Conforming to<br>EMC Directive Recognition<br>Certified<br>[ DP-101 ( A )/ 102 ( A ) only]<br>* Passed the UL 991 Environment Test<br>* UL 61010C-1 compatible, Passed the UL 991<br>Environment Test based on SEMI S2-0200.<br>[Category applicable for semiconductor<br>i ee manufacturing: TWW2, Process Equipment]<br>[Applicable standards: UL 61010C-1]<br>[Additional test / evaluation standards as per intended<br>use: UL 991, SEMI S2-0200]<br>panasonic.net/id/pidsx/global Digital Auto reference With analog<br>———, 8 Se output<br>**----- End of picture text -----**<br>


## **Dual 3-color display makes operation easier!** 

**Achieved further efficiency with 4 upgrades, keeping the same operability** 

## **UPGRADE 1** 

## **Superior visibility Improved visibility in Digital Display** 

Improvements to the digital display deliver a wide viewing angle along with increased clarity. The display pressure range and set pressure range have also been increased. 

**Old DP-100 series** 

**==> picture [72 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
New DP-100 series<br>**----- End of picture text -----**<br>


## ~~RE rrr~~ **UPGRADE 2** ~~ed~~ **DP-100 Long-distance transmission of analog output DP-M Addition of analog current output capability to multifunctional models** 

Users can now select either voltage output or current output as analog output according to their application. 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

736 

## **APPLICATIONS** 

**==> picture [437 x 14] intentionally omitted <==**

**----- Start of picture text -----**<br>
Confirming suction of electronic component Confirming reference pressure Air-leak test for PET bottles<br>**----- End of picture text -----**<br>


FIBER SENSORS 

LASER SENSORS 

PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS 

## **UPGRADE 3** 

**Reduced environmental impact 14% lower power consumption (during normal operation)** 

**14% lower after update** 

Thanks to a redesign of its circuitry, power consumption of the low-power-consumption **DP-100** series during normal operation has been reduced by 14%. The display is shut off entirely during ECO / FULL mode operation for power savings of up to 50% compared to normal operation, and display brightness is lowered during ECO / STD mode operation for power savings of up to 30% compared to normal operation. 

**Old DP-100 series New DP-100 series** 840 mW (normal operation) 720 mW (normal operation) 

**Up to 50% lower in ECO mode** 

Normal operation ECO / FULL operation 720 mW 360 mW 

## **UPGRADE 4** 

## **Enhanced power circuitry Addition of a reverse polarity protection circuit to the transistor output circuit** 

AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 

FA COMPONENTS MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

To prevent from breakage due to miswiring. 

## **“Current value” and “threshold value” can be checked at the same time! Dual display allows direct setting of threshold value** 

Equipped with a 30 mm 1.181 in square compact-sized dual display. The current value and the threshold value can be checked at the same time, so the threshold value can be set and checked smoothly without switching to another screen mode. ON / OFF operations still continue while the threshold values are being set, so setting to the same sensitivity as dial control-type sensors is possible. Key lock function is equipped as well. 

**==> picture [28 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
Current<br>value<br>**----- End of picture text -----**<br>


**==> picture [39 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
Selection<br>Guide<br>Pressure/<br>Digital Display<br>Pressure/<br>Head-separated<br>Flow<br>**----- End of picture text -----**<br>


**DP-100 DP-M** 

**==> picture [39 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Threshold<br>value<br>**----- End of picture text -----**<br>


Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

737 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW ~~a~~ SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION ~~—~~ DEVICES LASER MARKERS ~~oO~~ PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION **Copy function reduces man-hours and human error** VISUALIZATION COMPONENTS Sensors can be connected to a master sensor one by one, and a copy of the setting details for the master sensor can be transmitted as data FA COMPONENTS to other sensors. If making the same settings for multiple sensors, this prevents setting errors among other sensors and in addition, when machinery design are changed, there would be less change in work orders. MACHINE VISION Details transmitted SYSTEMS **Copying via wiring** UV CURING SYSTEMS Master sensor Slave sensor Details received _ Power supply +V +V ~~Tee~~ 0 V 0 V ' ae WA Comparative output 1 Comparative output 1 Comparative output 2 Comparative output 2 Selection Guide Note: Settings cannot be copied from the new version (Ver. 2) to the old version. Pressure/ However, settings can be copied from the old version to the new version (Ver. 2). ~~a~~ Digital Display —— RE ny Pressure/ Head-separated Flow 

**DP-100 DP-M** 

## **3-color display (Red, Green, Orange)** 

The main display changes color in line with changes in the status of output ON / OFF operation, and it also changes color while setting is in progress. The sensor status can therefore be understood easily, and operating errors can be reduced. 

## **Readable digital display!** 

Alphanumeric indication in 12 segments is used. This improved visual checking. 

**==> picture [212 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
OFF: Green (or Red) ON: Red (or Green) SET: Orange<br>Main<br>Display<br>During normal operation During setting<br>**----- End of picture text -----**<br>


## ~~————~~ SENSORS —EEoEoEoEOououUw(w(wowwww **BASIC PERFORMANCE** 

## **High performance accomplished** 

## **All models in the line-up are compound pressure types** 

Low pressure type 

The low pressure type displays measurements in 0.1 kPa at a resolution of 1/2,000 and has a response time of 2.5 ms (variable up to 5,000 ms), ±0.5 % F.S. temperature characteristics and ±0.1 % F.S. repeatability, giving it high performance. 

No sensor settings are required to switch between positive pressure and negative pressure, so that the number of registered part numbers can be decreased. 

> **<For low pressure>** characteristics and ±0.1 % F.S. repeatability, giving it 

> Ideal for applications suchas suction. high performance. No mis-operations due to **<For high pressure>** vacuum breakdown occur. Ideal for applications such as Resolution: 1/2,000 –100 kPa 0 kPa 100 kPa checking reference pressure. Can also be used for simple Response time: 2.5 ms For low suction. pressure **DP-101** □ Temperature characteristics: ±0.5 % F.S. 

> 1 MPa Repeatability: ±0.1 % F.S. For high **DP-102** □ 

> pressure oo **Displays measurements in 0.1 kPa** » | Lod 

**==> picture [542 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
R HUMAN MACHINE  FUNCTIONS n<br>**----- End of picture text -----**<br>


Sensors can be connected to a master sensor one by one, and a copy of the setting details for the master sensor can be transmitted as data to other sensors. If making the same settings for multiple sensors, this prevents setting errors among other sensors and in addition, when machinery design are changed, there would be less change in work orders. 

## **The sensor’s setting operation mode has a 3-level configuration to suit the frequency of use** 

The setting levels are clearly separated into “RUN mode” for operation settings that are carried out daily, “MENU SETTING mode” for basic settings, and “PRO mode” for special and detailed setting. These make setting operations easy to understand and easy to carry out. 

**==> picture [174 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
Simple setting  RUN mode<br>MENU SETTING mode<br>Special and  PRO mode<br>detailed setting<br>**----- End of picture text -----**<br>


**==> picture [86 x 121] intentionally omitted <==**

**----- Start of picture text -----**<br>
RUN mode<br>MENU SETTING mode<br>PRO mode<br>**----- End of picture text -----**<br>


Settings such as threshold value adjustment and key lock operation can be carried out while the sensor is operating. 

Basic settings such as output mode setting and NO / NC switching can be carried out. 

High-level function settings such as hysteresis adjustment and the copy function can be carried out. 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

738 

AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 

## ~~e~~ **FUNCTIONS** ~~e~~ 

**==> picture [202 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
put modes ut modes  | Standard type<br>O 1   EASY mode<br>This mode is used for comparative output ON / OFF control.<br>H (Hysteresis)<br>P<br>0<br>ON<br>Comparative output OFF H: Fixed<br>Pressure<br>**----- End of picture text -----**<br>


## **Equipped with independent dual output and three output modes ut modes** 

Equipped with two independent comparative outputs, and separate sensing modes can be selected for each of them. Since there are two comparative outputs, one of the comparative outputs can even be used for alarm output. In addition, output, which is not being used, can be disabled. 

This mode is used for comparative output ON / OFF control. 

## **Vacuum breakdown can also be notified during suction applications!** 

Notes: 1) Hysteresis can be fixed to one of eight different levels. 2) “ ”appears in the sub display for comparative output 1, and “ ” appears for comparative output 2. 

**==> picture [206 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Comparative output 1<br>A EASY mode  Suction checking<br>OFF<br>><br>ON<br>Comparative output 2<br>> EASY mode<br>OFF<br>SPS oye, | Vacuum breakdown checking<br>–100 kPa  P-1  0 kPa  P-2<br>**----- End of picture text -----**<br>


## 2 **Hysteresis mode** 

This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control. 

**==> picture [229 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
Hi<br>H (Hysteresis)<br>Lo<br>0<br>ON<br>Comparative output OFF H: 1 digit or more<br>Note: “  Hef  ” or “  La-t  ” appears in the sub display for comparative<br>output 1, and “  Hod  ” or “  Love  ” appears for comparative output 2.<br>Pressure<br>**----- End of picture text -----**<br>


## **Reference pressure alarm output is possible during reference pressure checking!** 

**==> picture [143 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON  Reference<br>Comparative output 1 pressure<br>Hysteresis mode checking<br>OFF<br>Alarm output<br>ON<br>Comparative output 2<br>EASY mode<br>OFF<br>0 kPa  Lo-1  Hi-1  P-2<br>**----- End of picture text -----**<br>


## O 3 **Window comparator mode** 

This mode is used for setting comparative output ON and OFF at pressures within the setting range. 

**==> picture [228 x 78] intentionally omitted <==**

**----- Start of picture text -----**<br>
H (Hysteresis)<br>Hi<br>H (Hysteresis)<br>Lo<br>0<br>ON<br>Comparative output OFF H: Fixed<br>Notes: 1) Hysteresis can be fixed to one of eight different levels.<br>2) “   ” or “   ” appears in the sub display for comparative<br>output 1, and “  Me?  ” or “  Lad  ” appears for comparative output 2.<br>Pressure<br>**----- End of picture text -----**<br>


## | **NEW** 

## | Multi-function type 

## **Possible to switch over analog output and external input** 

## FIBER SENSORS 

LASER SENSORS 

PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC 

FA COMPONENTS 

MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

Multi-function type of Ver. 2 is newly equipped with analog current output, in addition to analog voltage output. Multi-function type that enables the selection of analog output (voltage / current) or external input (auto-reference / remote zero-adjustment) is available. It complies a wide range of applications. 

**==> picture [341 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
Comparative output<br>— i<br>wonne----- Q--------eeeeeeeeeeees<br>is blinking.<br>| ANALOG |<br>Voltage  Low pressure type: 1 to 5 V,<br>Analog output High pressure type: 0.6 to 5 V<br>Selection i | Current  Low pressure type: 4 to 20 mA,<br>High pressure type: 2.4 to 20 mA<br>or<br>\ 3<br>External input Auto-reference / remote zero-adjust<br>**----- End of picture text -----**<br>


**==> picture [137 x 36] intentionally omitted <==**

**----- Start of picture text -----**<br>
Selection<br>ee — i<br>Multi-function type<br>Cd \<br>**----- End of picture text -----**<br>


Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

739 

~~CC~~ FIBER ~~Er~~ **FUNCTIONS** ~~r~~ SENSORS LASER **Equipped with auto-reference / remote zero-adjustment functions, More precise pressure management is achieved with a minimum of effort** Multi-function type SENSORS If the reference pressure of the device changes, two functions are selectable. PHOTOELECTRICSENSORS One is auto-reference function, which partially shift the comparative output judgment level by the amount that the reference pressure shifts.  The other PHOTOELECTRICMICRO is remote zero-adjustment function, which can reset the display value to zero ~~_~~ SENSORS via external input. These functions are ideal for places where the reference AREA pressure fluctuates wildly, or where fine settings are required. SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW With auto-reference function applied With remote zero-adjustment function applied ~~|~~ SENSORS INDUCTIVE Comparative output: Window comparator mode Comparative output: Window comparator mode PROXIMITY Hi-1…0, Lo-1…–5 Hi-1…0, Lo-1…–5 SENSORS Sets the absolute threshold level Sets the absolute threshold level PARTICULAR Auto-reference input Remote zero-adjustment input USE SENSORS The display remains at “30” and The display is forced to “0”, and only the only the threshold level is changed. filling pressure drop range is displayed. SENSOR OPTIONS SIMPLE 30 30 0 WIRE-SAVING 25 OK 25 –5 OK UNITS WIRE-SAVING 20 Threshold level after applying 20 Threshold level after applying SYSTEMS 15 auto-reference input 15 remote zero-adjustment input MEASUREMENTSENSORS Threshold level before applyingauto-reference input Threshold level before applyingremote zero-adjustment input Trial 1 Trial 1 STATIC ELECTRICITYPREVENTION Pressure 0 Pressure 0 LASERDEVICES –5 Time Auto-reference input value… –5 Time Displayed when remote zero-adjustmentinput is applied… MARKERS When auto-reference input is applied, the reference pressure “30” When remote zero-adjustment input is applied, the reference is added to the threshold level. If the reference pressure changes pressure is forced to “0”. If the reference pressure changes to PLC to “20” or “40”, the auto-reference input compensates for this “20” or “40”, the remote zero-adjustment input adjusts the 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

When auto-reference input is applied, the reference pressure “30” is added to the threshold level. If the reference pressure changes to “20” or “40”, the auto-reference input compensates for this every time by changing the threshold level, so any variation in the filling pressure can be ignored. 

## **Sub display can be customized** 

The sub display can be set to indicate any other desired values or letters apart from the threshold value. This eliminates the need for tasks such as affixing a label to the device to indicate the normal pressure value. 

When remote zero-adjustment input is applied, the reference pressure is forced to “0”. If the reference pressure changes to “20” or “40”, the remote zero-adjustment input adjusts the reference pressure to “0” every time the reference pressure changes, so any variation in the filling pressure can be ignored. 

## **Setting details can be recognized at a glance** 

The **DP-100** setting details appear in the digital display. Because the settings are in numeric form that can be easily understood, it is useful such as when receiving technical support by telephone. 

**==> picture [230 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
2nd digit: Setting status for<br>comparative output 2  3rd digit: Threshold value setting<br>1st digit: Setting status for  4th digit: Display color setting<br>comparative output 1<br>5th digit: Response time<br>setting  8th digit: ECO mode setting<br>6th digit: Display unit setting  7th digit: Display refresh rate setting<br>**----- End of picture text -----**<br>


**DP-100 DP-M** 

## **Peak hold and Bottom hold functions** 

The peak values and bottom values for fluctuating pressures can be displayed using the dual display. 

Blinks alternately af 

## **Energy-saving design! Equipped with an ECO mode** 

This mode lowers the display luminance to cut power consumption by approximately 30 %. The displays can also be turned off completely to achieve a power saving of approximately 40 %. 

Power consumption Power consumption Approx. **Approx. Normal ECO-STD** 30 % less **ECO-FULL 40 % less** es ~~oe~~ 

Current consumption for Current consumption for Current consumption for 24 V power supply: **35 mA or less** 24 V power supply: **25 mA or less** 24 V power supply: **20 mA or less** 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

740 

AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

## ~~OO~~ **MOUNTING** 

## **Tight installation to panels is possible** 

An exclusive mounting bracket that is suitable for 1 to 6 mm 0.039 to 0.236 in panel thickness is available. 

**==> picture [218 x 53] intentionally omitted <==**

**----- Start of picture text -----**<br>
Front protection<br>cover available<br>MS-DP1-3<br>A single mounting hole!<br>**----- End of picture text -----**<br>


FIBER SENSORS 

LASER SENSORS 

PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS 

## **An exclusive mounting bracket (MS-DP1-1) that supports tight installation is available** 

Space savings can also be achieved even when an L-shaped mounting bracket is used. 

**==> picture [468 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
• MS-DP1-1 • MS-DP1-5<br>Ceiling mounting Floor mounting Rear mounting Positioning bosses for easier<br>mounting bracket installation<br>Tight installation is possible<br>**----- End of picture text -----**<br>


## **Types without connector attached cable are also available** 

**DP-10** □ **-J** 

## **Cable can be connected with one-touch** 

Connector attached cable (2 m 6.562 ft), as an accessory, can be connected easily with one-touch connection. 

Commercially-available connectors can be used for cable connections. Cables in required length can be used, so this contributes to reduction in waste of unwanted cables. 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 

FA COMPONENTS 

MACHINE VISION SYSTEMS 

UV CURING SYSTEMS 

**==> picture [47 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
* Connection cable<br>**----- End of picture text -----**<br>


**==> picture [125 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
Commercially-available<br>parts can be used!<br>**----- End of picture text -----**<br>


*  Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft types are also available. 

- Refer to p.743 for recommeded commercially-available connectors. 

**DP-100 DP-M** 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

741 

~~e~~ FIBER **VARIETIES** ~~ee~~ SENSORS LASER **Short pressure port type is lightweight and takes up little space DP-10** □ **-M** SENSORS Compact size with a depth of only 30 mm 1.181 in, so PHOTOELECTRICSENSORS that it can easily fit into narrow spaces. Standard type M5 female thread + R 1/8 male thread ~~a~~ MICRO Further, 10 g lighter than standard types. This reduces PHOTOELECTRIC the loads on movable parts such as robot arms. Elbow joint SENSORS Short pressure AREA port type **DP-10□-M** ~~OO~~ SENSORS ip ta F LIGHT CURTAINS / ~~ee~~ SAFETY a \ > il COMPONENTS PRESSURE / SENSORSFLOW Short pressure port type INDUCTIVE PROXIMITY **Shortened to** SENSORS A. i Shortened **12.5 mm 0.492 in !** to USE SENSORSPARTICULAR **Light weight 30g approx.** ~~ee~~ SENSOR SSeS i P weight OPTIONS M5 female thread SIMPLE 1.181 in 30 mm [Material: Stainless steel (SUS)] WIRE-SAVING UNITS *  The illustration shows connection using an elbow joint. WIRE-SAVING The elbow joint is sold separately. SYSTEMS MEASUREMENT **M8 plug-in connector types are also available (Only for Europe) DP-11** □ **-E-P-J** SENSORS STATIC ELECTRICITY PREVENTION M8 connector DEVICES Mating cable LASER **CN-24A-C2** (cable length 2 m 6.562 ft)6.562 ft)) MARKERS **CN-24A-C5** (cable length 5 m 16.404 ft)16.404 ft)) PLC HUMAN MACHINE INTERFACES ~~—~~ ee ENERGY CONSUMPTION G 1/8 male thread VISUALIZATION M5 female thread COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**==> picture [198 x 138] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mating cable<br>CN-24A-C2  (cable length 2 m 6.562 ft)6.562 ft))<br>CN-24A-C5 ee  (cable length 5 m 16.404 ft)16.404 ft))<br>G 1/8 male thread<br>M5 female thread<br>For short pressure port type with pprevious model<br>**----- End of picture text -----**<br>


## **Flat installation on the wall by shifting the direction of the pressure port For short pressure port type** 

## **Rc1/8 conversion bushing is available. Compatible with pprevious model For short pressure port type** 

By mounting the flat attachment to **DP-10□-M** ( **-P** ), pressure port and cable can now be pulled out in downward, left or right directions.  Flat mounting on surfaces such as the wall is made possible. 

By equipping the push-in converter with **DP-10□-M** ( **-P** ), pressure port can be converted from M5 female thread to Rc1/8 female thread. 

Bore diameter conversion to the **DP2** / **DP3** series is possible. 

**==> picture [103 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
Previous model  DP2  /  DP3<br>series can be switched over to<br>DP-100  series.<br>Previous model<br>20 mm 20 mm<br>0.787 in pitch 0.787 in pitch<br>Model No. Pressure port<br>MS-DP1-FM M5 female thread<br>MS-DP1-FR Rc1/8 female thread<br>MS-DP1-FN NPT1/8 female thread<br>MS-DP1-FE G1/8 female thread<br>**----- End of picture text -----**<br>


**==> picture [111 x 79] intentionally omitted <==**

**----- Start of picture text -----**<br>
M5 female thread Rc1/8 female thread<br>Conversion bushing<br>MS-DP1-7<br>**----- End of picture text -----**<br>


**DP-100 DP-M** 

742 _ 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

|Type<br>~~a~~|Type<br>~~a~~|Type<br>~~a~~|Type<br>~~a~~|Type<br>~~a~~|Appearance<br>~~a~~|Rated pressure range<br>~~a~~|Model No.<br>~~a~~|Pressure port<br>~~a~~|Comparative output|
|---|---|---|---|---|---|---|---|---|---|
|Standard pressure port type<br>~~a~~|Asia<br>~~a~~||Standard<br>~~a~~|For low pressure<br>~~a~~|***CN-14A-C2**<br> (Connector attached<br>cable 2 m6.562 ft)<br>is attached.<br> (Excluding M8 plug-in<br>connector type)<br>~~a~~<br> <br>~~——_~~|−100.0 to +100.0 kPa<br>~~a~~|**DP-101**<br>~~a~~|M5 female thread<br>+<br>R1/8<br>male thread<br>~~a~~|NPN open-collector transistor|
|||||For high pressure<br>~~a~~||−0.100 to +1.000 MPa<br>~~a~~|**DP-102**<br>~~a~~|||
||||Multi-function<br>~~a~~|For low pressure<br>~~a~~||−100.0 to +100.0 kPa<br>~~a~~|**DP-101A**<br>~~a~~|||
|||||For high pressure<br>~~a~~||−0.100 to +1.000 MPa<br>~~a~~|**DP-102A**<br>~~a~~|||
||Europe<br>M8 plug-in connector type<br>~~a~~<br>~~E~~||Standard<br>~~a~~<br>~~ES~~|For low pressure<br>~~a~~<br>~~S~~||−100.0 to +100.0 kPa<br>~~a~~|**DP-101-E-P**<br>~~a~~|M5 female thread<br>+<br>G1/8<br>male thread<br>~~a~~|PNP open-collector transistor|
|||||For high pressure<br>~~S~~||−0.100 to +1.000 MPa|**DP-102-E-P**|||
||||Multi-function<br>~~ES~~|For low pressure<br>~~S~~||−100.0 to +100.0 kPa|**DP-101A-E-P**|||
|||||For high pressure<br>~~S~~||−0.100 to +1.000 MPa|**DP-102A-E-P**|||
|||M8 plug-in connector type<br>~~E~~|Standard<br>~~ES~~|For low pressure<br>~~S~~||−100.0 to +100.0 kPa|**DP-111-E-P-J**|M5 female thread<br>+<br>G1/8<br>male thread|PNP open-collector transistor|
|||||For high pressure<br>~~S~~||−0.100 to +1.000 MPa|**DP-112-E-P-J**|||
||||Multi-function<br>~~ES~~|For low pressure<br>~~S~~||−100.0 to +100.0 kPa|**DP-111A-E-P-J**|||
|||||For high pressure<br>~~S~~||−0.100 to +1.000 MPa|**DP-112A-E-P-J**|||
||North America<br>~~E~~<br>~~[a=~~||Standard<br>~~ES~~|For low pressure<br>~~S~~||−100.0 to +100.0 kPa|**DP-101-N**|M5 female thread<br>+<br>NPT1/8<br>male thread<br>~~5~~|NPN open-collector transistor|
||||||||**DP-101-N-P**||PNP open-collector transistor|
|||||For high pressure||−0.100 to +1.000 MPa|**DP-102-N**||NPN open-collector transistor|
||||||||**DP-102-N-P**||PNP open-collector transistor|
||||Multi-function<br>~~[a=~~|For low pressure||−100.0 to +100.0 kPa|**DP-101A-N**||NPN open-collector transistor|
||||||||**DP-101A-N-P**||PNP open-collector transistor|
|||||For high pressure<br>~~[a=~~||−0.100 to +1.000 MPa<br>~~=~~~~**=**~~|**DP-102A-N**<br>~~**=**5~~||NPN open-collector transistor|
||||||||**DP-102A-N-P**<br>~~**=**5~~||PNP open-collector transistor|
|Short  pressure port type|Asia<br>~~[a=~~||Standard<br>~~[a=~~|For low pressure<br>~~[a=~~||−100.0 to +100.0 kPa<br>~~=~~~~**=**~~|**DP-101-M**<br>~~**=**5~~|M5 female thread<br>~~5~~|NPN open-collector transistor|
||||||||**DP-101-M-P**<br>~~**=**5~~||PNP open-collector transistor|
|||||For high pressure<br>~~[a=~~||−0.100 to +1.000 MPa<br>~~=~~~~**=**~~|**DP-102-M**<br>~~**=**5~~||NPN open-collector transistor|
||||||||**DP-102-M-P**<br>~~**=**5~~||PNP open-collector transistor|
||||Multi-function<br>~~[a=~~<br>~~——_~~|For low pressure<br>~~[a=~~<br>~~——_~~||−100.0 to +100.0 kPa<br>~~=~~~~**=**~~<br>~~——_~~|**DP-101A-M**<br>~~**=**5~~||NPN open-collector transistor|
||||||||**DP-101A-M-P**<br>~~**=**5~~||PNP open-collector transistor|
|||||For high pressure<br>~~[a= ~~<br>~~——_~~||−0.100 to +1.000 MPa<br> ~~=~~~~**=**~~<br>~~——_~~|**DP-102A-M**<br>~~**=**5~~||NPN open-collector transistor|
||||||||**DP-102A-M-P**<br>~~**=**5~~||PNP open-collector transistor|



## **Accessory** 

**• CN-14A-C2** (Connector attached cable 2 m 6.562 ft) 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

743 

## FIBER **OPTIONS** ~~a~~ SENSORS ~~meee~~ 

## FIBER **OPTIONS** SENSORS LASER SENSORS 

**Connector attached cable • CN-14A-C□ • CN-14A-R-C□** 

**==> picture [536 x 403] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|PHOTO-|Designation|Model No.|Description|• CN-14A-C□|
|ELECTRIC|• CN-14A-R-C□|
|SENSORS|
|MICRO|CN-14A-C1|Length: 1 m 3.281 ft|
|ELECTRICSENSORSPHOTO-|Connector attached cable|CN-14A-C2|(Note)|Length: 2 m 6.562 ft|0.2 mmconnector on one end|[2]|4-core cabtyre cable with|
|CN-14A-C3|Length: 3 m 9.843 ft|Cable outer diameter: ø3.7 mm ø0.146 in|
|AREA|
|SENSORS|CN-14A-C5|Length: 5 m 16.404 ft|
|LIGHT|CN-14A-R-C1|Length: 1 m 3.281 ft|
|COMPONENTSCURTAINS /SAFETY|Connector attached cable|CN-14A-R-C2|Length: 2 m 6.562 ft|with connector on one end 0.2 mm|[2]|4-core flexible cabtyre cable|
|—|PRESSURE / FLOW|(Flexible cable)|[J|CN-14A-R-C3|Length: 3 m 9.843 ft|Cable outer diameter: ø3.7 mm ø0.146 in|-|
|=|SENSORS|a|CN-14A-R-C5|Length: 5 m 16.404 ft|
|PROXIMITYINDUCTIVE|M8 connector|CN-24A-C2|Length: 2 m 6.562 ft|For M8 plug-in connector type|
|SENSORS|attached cable|The connector on one end|M8 connector attached cable|
|——|PARTICULARUSE|P|p|CN-24A-C5|o|Length: 5 m 16.404 ft|Cable outer diameter: ø4 mm ø0.157 in|• CN-24A-C□|
|SENSORS|Connector|CN-14A|Set of 10 housings and 40 contacts|
|—|oo|
|OPTIONSSENSOR|Sensor|MS-DP1-1|Allows sensors to be installed on the flooring or ceiling. Multiple sensors can also be mounted closely.|
|mounting|
|WIRE-SAVINGSIMPLE|bracket|MS-DP1-5|Allows sensors to be installed on the wall.  Multiple sensors|
|UNITS|can also be mounted closely.|
|——_|WIRE-SAVING SYSTEMS|Panel mounting|oe|MS-DP1-2|Allows installation to panels with thickness of 1 to 6 mm to 0.236 in. Multiple sensors can also be mounted closely.0.039|Fe|‘es.|
|MEASURE-SENSORSMENT|bracket|MS-DP1-4|Allows replacement from set-up, please use panel mounting bracket|DP2|/|DP3|series to|MS-DP1-2DP-100|series.  For newly designed  for panel mounting.|1.23631.4|ø4ø0.157|
|ELECTRICITYSTATIC|Front protection|ee|MS-DP1-3|Protects the adjustment surfaces of sensors.|-—|
|PREVENTION|cover|(Can be attached when using the panel mounting bracket)|
|_|DEVICES|a|=|—|—|
|ø9|
|MARKERSLASER|Conversion bushing|MS-DP1-7|RcBy equipping with|[1]|/8 female thread.  Replacement from|DP-10|□|-M|(|-P|), pressure port can be converted to|DP2|/|DP3|series is possible.|_|ø0.354|(Unit: mm in)|
|MS-DP1-FM|M5 female thread|
|—|PLC|es|Pressure port and cable can now be|
|—a|CONSUMPTION INTERFACESMACHINE HUMAN ENERGY|Note: The connector attached cable Flat attachment|MS-DP1-FRMS-DP1-FNMS-DP1-FE|CN-14A-C2|GRcNPT|[1]|/|[1]|8/ female thread8|[1]|female thread/8 is supplied with the  female thread|pulled out in downward, left or right directions.  Flat mounting on surfaces such as the wall is made possible.|DP-100|series.|Sensor mounting bracket• MS-DP1-1|M3 (length 6 mm screws with washers0.236 in)screws with washers0.236 in)0.236 in))|;|
|VISUALIZATION COMPONENTS|(Excluding M8 plug-in connector type).|(Accessory forAccessory for|MS-DP1-1|)|
|COMPONENTSFA|ee|ae|
|Sensor mounting|
|MACHINE|Panel mounting bracket, Front protection cover|bracket|
|SYSTEMSVISION|• MS-DP1-2|• MS-DP1-4|DP2|/|DP3|MS-DP1-1|
|• MS-DP1-3|
|UV|Front protection cover|
|CURING|DPX-04|(optional)|Remove|
|SYSTEMS|

**----- End of picture text -----**<br>


**==> picture [319 x 336] intentionally omitted <==**

**----- Start of picture text -----**<br>
DP-100  series.  M3 (length 6 mm screws with washers0.236 in)screws with washers0.236 in)0.236 in))<br>(Accessory forAccessory for MS-DP1-1 )<br>Sensor mounting<br>bracket<br>• MS-DP1-4 DP2  /  DP3 MS-DP1-1<br>Front protection cover<br>DPX-04  (optional) Remove<br>can be installed on<br>MS-DP1-4 .<br>Remove<br>• MS-DP1-5<br>Insert M3 (length 6 mm 0.236 in)<br>DP-100 5 Mounting holes screws with washers<br>for  DP2  /  DP3  series Accessory for<br>can be used as is. ( MS-DP1-5 )<br>Panel mounting bracket g bracket  bracket  MS-DP1-4<br>Sensor mounting<br>bracket<br>MS-DP1-5<br>-<br>Net weight: MS-DP1-FM  15g approx. Conversion bushing<br>MS-DP1-FR/FN/FE  25g approx. • MS-DP1-7<br>Two M3 (length 8 mm 0.315 in) screws,<br> two M4 (length 20 mm 0.787 in) screws are attached. M5 female thread Rcthread [1] /8 female<br>0 S0<br>e,<br>Conversion bushing<br>fo MS-DP1-7<br>0-ADJ<br>OUT1 OUT2MODEMODE<br>DP2-20 ñ101.3kPa<br>**----- End of picture text -----**<br>


**==> picture [343 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
• MS-DP1-2 • MS-DP1-4 DP2  /  DP3<br>• MS-DP1-3<br>Front protection cover<br>DPX-04  (optional) Remove<br>can be installed on<br>MS-DP1-4 .<br>Front protection cover Remove<br>MS-DP1-3<br>Insert<br>(A DP-100 5 Mounting holes<br>for  DP2  /  DP3  series<br>can be used as is.<br>Panel mounting bracket MS-DP1-2 Panel mounting bracket g bracket  bracket  MS-DP1-4<br>0-ADJ<br>OUT1 OUT2MODEMODE<br>DP2-20 ñ101.3kPa<br>**----- End of picture text -----**<br>


Selection Guide Panel mounting bracket **MS-DP1-2** Pressure/ Digital Display Pressure/ Head-separated **Flat attachment** ~~=~~ Flow **• MS-DP1-FM • MS-DP1-FR** ~~.~~ **• MS-DP1-FN• MS-DP1-FE DP-100 DP-M** ~~_~~ _ Net weight: **MS-DP1-FM** ® ae **Recommended connector** Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.) 

Note: Contact the manufacturer for details of the recommended products. 

## **Recommended crimping tool** 

Model No.: YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

744 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

## **SPECIFICATIONS** 

|Model No.<br>Item|Model No.<br>Item|Type|Type|Standard|Standard|Standard|Multi-function|Multi-function|
|---|---|---|---|---|---|---|---|---|
|||||For lowpressure||For highpressure|For lowpressure|For highpressure|
|||Asia(Note 2)||**DP-101**(**-M**)(**-P**)||**DP-102**(**-M**)(**-P**)|**DP-101A**(**-M**)(**-P**)|**DP-102A**(**-M**)(**-P**)|
|||Europe<br>M8plug-in connector type||**DP-101-E-P**||**DP-102-E-P**|**DP-101A-E-P**|**DP-102A-E-P**|
||||M8plug-in connector type|**DP-111-E-P-J**<br>||**DP-112-E-P-J**|**DP-111A-E-P-J**|**DP-112A-E-P-J**|
|||North America(Note 2)||**DP-101-N**(**-P**)||**DP-102-N**(**-P**)|**DP-101A-N**(**-P**)|**DP-102A-N**(**-P**)|
|Type ofpressure||||Gaugepressure|||||
|Ratedpressure range||||−100.0 to +100.0 kPa||−0.100 to +1.000 MPa<br>|−100.0 to +100.0 kPa<br>|−0.100 to +1.000 MPa|
|Set pressure range||||−1.030 to +1.030 kgf/cm2<br>−1.010 to +1.010 bar<br>−14.64 to +14.64 psi<br>−757 to +757 mmHg<br>−29.8 to 29.8 inHg<br>−101.0 to +101.0 kPa||−101 to +1,010 kPa<br>−1.03 to +10.30 kgf/cm2<br>−1.01 to +10.10 bar<br>−14.6 to +146.4 psi<br>−0.101 to +1.010 MPa|−1.030 to +1.030 kgf/cm2<br>−1.010 to +1.010 bar<br>−14.64 to +14.64 psi<br>−757 to +757 mmHg<br>−29.8 to 29.8 inHg<br>−101.0 to +101.0 kPa|−101 to +1,010 kPa<br>−1.03 to +10.30 kgf/cm2<br>−1.01 to +10.10 bar<br>−14.6 to +146.4 psi<br>−0.101 to +1.010 MPa|
|Pressure withstandability||||500 kPa||1.5 MPa|500 kPa|1.5 MPa|
|Applicable fluid||||Non-corrosivegas|||||
|Selectable unit||||For lowpressure: kPa, kgf/cm2, bar,psi, mmHg, inHg, For highpressure: MPa, kPa, kgf/cm2, bar,psi|||||
|Supplyvoltage||||12 to 24 V DC ±10 %   Ripple P-P 10 % or less|||||
|Power consumption||||Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)<br>ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)<br>360 mW or less at FULL(Current consumption 15 mA or less at 24 V supplyvoltage)|||||
|Comparative output<br>Output operation / Output modes<br>Hysteresis<br>Repeatability<br>Response time<br>Short-circuitprotection<br>Comparative output 1,<br>Comparative output 2 (Note 3)||||<Asia (NPN output), North America (NPN output)><br>NPN open-collector transistor<br>• Maximum sink current: 100 mA<br>•Applied voltage: 30 V DC or less (between comparative output and 0 V)<br>• Residual voltage: 2 V or less(at 100 mA sink current)<br><Asia (PNP output), Europe, North America (PNP output)><br>PNP open-collector transistor<br>• Maximum source current: 100 mA<br>•Applied voltage: 30 V DC or less (between comparative output and +V)<br>• Residual voltage: 2 V or less(at 100 mA source current)|||||
||Output operation / Output modes|||NO / NC(selectable bykeyoperation)/ EASY mode / Hysteresis mode / Window comparator mode|||||
||Hysteresis|||Minimum 1 digit(variable) (however, 2 digits when using psi unit)|||||
||Repeatability|||±0.1 % F.S.(within ±2 digits)||±0.2 % F.S.(within ±2 digits)|±0.1 % F.S.(within ±2 digits)|±0.2 % F.S.(within ±2 digits)|
||Response time|||2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable bykeyoperation|||||
||Short-circuitprotection||||Incorporated||||
|External input (Note 4)<br>Auto-reference function /<br>Remote zero-adjustment<br>function|||||||<Asia (NPN output), North America (NPN output)><br>ON voltage: 0.4 V DC or less<br>OFF voltage: 5 to 30 V DC, or open<br>Input impedance: 10 kΩ approx.<br>Input time: 1 ms or more<br><Asia (PNP output), Europe, North America (PNP output)><br>ON voltage: 5 V to+V DC<br>OFF voltage: 0.6 V DC or less, or open<br>Input impedance: 10 kΩ approx.<br>Input time: 1 ms or more||
|Analog voltage output (Note 4)|||||||Output voltage: 1 to 5 V DC<br>Zero point: within 3 V±5 % F.S.<br>Span: within 4 V ±5 % F.S.<br>Linearity: within ±1 % F.S.<br>Output impedance: 1 kΩ approx.|Output voltage: 0.6 to 5 V<br>Zero point: within 1 V±5 % F.S.<br>Span: within 4.4 V ±5 % F.S.<br>Linearity: within ±1 % F.S.<br>Output impedance: 1 kΩ approx.|
|Analog current output (Note 4)|||||||Output current: 4 to 20 mA<br>Zero point: 12 mA ±5 % F.S.<br>Span: 16 mA ±5 % F.S.<br>Linearity: within ±1 % F.S.<br>Load resistance: 250 Ω(max.)|Output current: 2.4 to 20 mA<br>Zero point: 4 mA ±5 % F.S.<br>Span: 17.6 mA ±5 % F.S.<br>Linearity: within ±1 % F.S.<br>Load resistance: 250 Ω(max.)|
|Display<br>Displayable pressure range||||4 digits  + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)|||||
||Displayable pressure range|||−1.030 to +1.030 kgf/cm2<br>−1.010 to +1.010 bar<br>−14.64 to +14.64 psi<br>−757 to +757 mmHg<br>−29.8 to 29.8 inHg<br>−101.0 to +101.0 kPa||−101 to +1,010 kPa<br>−1.03 to +10.30 kgf/cm2<br>−1.01 to +10.10 bar<br>−14.6 to +146.4 psi<br>−0.101 to +1.010 MPa|−1.030 to +1.030 kgf/cm2<br>−1.010 to +1.010 bar<br>−14.64 to +14.64 psi<br>−757 to +757 mmHg<br>−29.8 to 29.8 inHg<br>−101.0 to +101.0 kPa|−101 to +1,010 kPa<br>−1.03 to +10.30 kgf/cm2<br>−1.01 to +10.10 bar<br>−14.6 to +146.4 psi<br>−0.101 to +1.010 MPa|
|Indicator||||(<br>Comparative output 1 operation indicator, comparative output 2 operation indicator:<br>Lights up when each comparative output is ON )<br>Orange LED|||Orange LED<br>(<br>Comparative output 1 operation indicator: Lights up when comparative output is ON,<br> Analog voltage output operation indicator: Lights up when setting<br>)||
|Environmental resistance|Protection|||IP40(IEC)|||||
||Ambient temperature|||−10 to +50 °C+14 to +122 °F, Storage: −10 to +60 °C+14 to +140 °F|||||
||Ambient humidity|||35 to 85 % RH(No dew condensation or icingallowed), Storage: 35 to 85 % RH|||||
||Voltage withstandability|||1,000 V AC for one min. between all supplyterminals connected together and enclosure|||||
||Insulation resistance|||50MΩ or more with 500 V DC megger between all supplyterminals connected together and enclosure|||||
||Vibration resistance|||10 to 500 Hz frequency, 3 mm0.118 inamplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each<br>(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 inamplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)|||||
||Shock resistance|||100 m/s2acceleration(10 G approx.)in X, Y and Z directions for three times each|||||
|Temperature characteristics||||Within ±0.5 % F.S.(at +20°C+68°F)||Within ±1 % F.S.(at +20 °C+68 °F)|Within ±0.5 % F.S.(at +20°C+68°F)|Within ±1 % F.S.(at +20 °C+68 °F)|
|Pressureport||||Asia: M5 female thread + R(PT) 1/8male thread [excluding **DP-**□**-M**(**-P**)], Europe: M5 female thread + G1/8male thread, North America: M5 female thread + NPT1/8male thread|||||
|Material||||Enclosure: PBT(glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel(SUS303), Mountingthreaded part: Brass(nickel plated), Switch part: Silicone rubber|||||
|Connectingmethod / Cable length||||Connector / Total length upto 100 m328.084 ft (less than 30 m98.425 ftwhen conformingto CE marking)ispossible with 0.3 mm2, or more, cable|||||
|Weight||||Net weight: 40gapprox.(**DP-10**□**-M**(**-P**): 30gapprox.), Gross weight: 130gapprox.(**DP-10**□**-M**(**-P**):120gapprox.)|||||
|Accessories||||**CN-14A-C2** (Connector attached cable 2 m6.562 ft): 1pc.(excludingM8plug-in connector type)|||||



**DP-100 DP-M** 

Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 

- 2) Model Nos. of Asia type having “ **-M** ” are short pressure port type.  Model Nos. of Asia and North America types having the suffix “ **-P** ” are PNP output type. 3) Only standard type is equipped with comparative output 2. 

- 4) Cannot be used at the same time. 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

745 

LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

FIBER SENSORS 

## **I/O CIRCUIT AND WIRING DIAGRAMS** 

**==> picture [503 x 699] intentionally omitted <==**

**----- Start of picture text -----**<br>
DP-10 □ NPN output type<br>Terminal No.<br>I/O circuit diagram Terminal No. Multi-function type Color code of connector attached cable<br>Standard type Color code of connector attached cable<br>1 (Brown) +V 5 V D1 1 (Brown) +V<br>Tr2 Tr1 DZ1 D1 DD32 23 (Black) Comparative output 1(White) Comparative output 2100 mA max.Load Load +− 12 to 24 V DC±10 % TTr2r1 1kΩ D3 D2 3 2 (White) Analog output(Black) Comparative output 1  or External input100 mA max.Load +− 1 ±2 to 24 V DC10 %<br>100 mA max. ZD<br>ZD2 4 (Blue) 0 V 4 (Blue) 0 V<br>Internal circuit Users’ circuit<br>Internal circuit Users’ circuit<br>Symbols • • • D1 to D3 : Reverse supply polarity protection diode Symbols • • • DZD1 to D : Surge absorption zener diode3 : Reverse supply polarity protection diode<br>ZD1, ZD2 : Surge absorption zener diode Tr1 : PNP input transistor<br>Tr1, Tr2 : NPN output transistor Tr2 : NPN output transistor<br>Terminal arrangement diagram Terminal  Designation<br>1 +V<br>2 Comparative output 1<br>3 Standard type: Comparative output 2<br>Multi-function type: Analog output or External input<br>1 2 3 4 4 0 V<br>DP-10 □ -P PNP output type<br>I/O circuit diagram Terminal No. Multi-function type Terminal No.Color code of connector attached cable<br>Standard type Color code of connector attached cable 1 (Brown) +V<br>1 (Brown) +V D1<br>Tr1 Tr2 ZD1 ZDD2 23 (Black) Comparative output 1(White) Comparative output 2100 mA max.100 mA max.Load Load +− 12 to 24 V DC±10 % TT1kΩrr12 D3 ZDD2 2 3 4 (Black) Comparative output 1(White) Analog output(Blue) 0 Vor External input100 mA max. Load +− 12 to 24 V DC±10 %<br>4 (Blue) 0 V Internal circuit Users’ circuit<br>Internal circuit Users’ circuit<br>Symbols • • • D1, D2 : Reverse supply polarity protection diode<br>Symbols • • • D : Reverse supply polarity protection diode ZD   : Surge absorption zener diode<br>ZD1, ZD2 : Surge absorption zener diode Tr1 : PNP output transistor<br>Tr1, Tr2  : PNP output transistor Tr2 : NPN input transistor<br>Terminal arrangement diagram Terminal  Designation<br>1 +V<br>2 Comparative output 1<br>3 Standard type: Comparative output 2<br>Multi-function type: Analog output or External input<br>1 2 3 4 4 0 V<br>DP-11 □ -E-P-J PNP output type<br>I/O circuit diagram Terminal No. Multi-function type Terminal No.<br>Color code of connection cable<br>Standard type Color code of connection cable<br>1 (Brown) +V D11 (Brown) +V<br>D ZD<br>Tr1 ZD1 ZD2 4 (Black) Comparative output 1100 mA max.100 mA max. +− 12 to 24 V DC±10 % TTrr12 1 k 4 2 (Black) Comparative output 1(White) Analog voltage output100 mA max. Load +− 12 to 24 V DC±10 %<br>Tr2 2 (White) Comparative output 2 Load D2 or External input<br>3 (Blue) 0 V Load 3 (Blue) 0 V<br>Internal circuit Users’ circuit<br>Internal circuit Users’ circuit<br>Symbols • • • D1, D2 : Reverse supply polarity protection diode<br>Symbols • • • D : Reverse supply polarity protection diode ZD : Surge absorption zener diode<br>ZD1, ZD2 : Surge absorption zener diode Tr1 : PNP output transistor<br>Tr1, Tr2 : PNP output transistor Tr2 : NPN input transistor<br>Terminal arrangement diagram 1 2 Terminal  Designation<br>1 +V<br>2 Standard type: Comparative output 2<br>3 4 Multi-function type: Analog output or External input<br>3 0 V<br>4 Comparative output 1<br>Sensor circuit<br>Sensor circuit<br>Sensor circuit<br>Sensor circuit<br>Sensor circuit<br>Sensor circuit<br>**----- End of picture text -----**<br>


Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

746 

Refer to p.1472 for general precautions. 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

## **PRECAUTIONS FOR PROPER USE** 

- Never use this product as a sensing device for personnel protection. 

- In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. 

- • The **DP-100** series is designed for use with non-corrosive gas. It cannot be used with liquid or corrosive gas. 

**==> picture [236 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
Part description<br>Main display<br>Comparative Output 1 operation indicator<br>Sub display<br>Comparative Output 2 operation indicator<br>Work as analog voltage output operation<br>( indicator in Multi-function type in<br>Mode selection Decrement<br>— key key<br>Increment<br>key<br>**----- End of picture text -----**<br>


## **Wiring** 

- Make sure that the power supply is off while wiring. 

- Verify that the supply voltage variation is within the rating. 

- If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. 

- In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this sensor, connect the frame ground (F.G.) terminal of the equipment to an actual ground. 

- Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. 

- Incorrect wiring will cause problems with operation. 

## **Connection** 

- Do not apply stress directly to . Connector the connection cable leader or attached cable to the connector. [ **CN-14A** ( **-R** ) **-C** □] 

## **Mounting** 

- **MS-DP1-1** / **MS-DP1-5** sensor mounting brackets are available separately, and it should be used for mounting. When tightening the sensor to the sensor mounting bracket, use a tightening torque of 0.5 N·m or less. 

**==> picture [148 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
M3 (length 6 mm 0.236 in)<br>screws with washers<br>Accessory for  MS-DP1-1<br>(                      )and  MS-DP1-5<br>Sensor mounting bracket<br>MS-DP1-1  (Optional)<br>**----- End of picture text -----**<br>


- The **MS-DP1-2** panel mounting bracket (optional) and the **MS-DP1-3** front protection cover (optional) are also available. 

**==> picture [156 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
Front protection cover<br>MS-DP1-3  (op s tional) ee<br>Panel mounting bracket<br>MS-DP1-2 (optional)<br>**----- End of picture text -----**<br>


- The **MS-DP1-4** panel mounting bracket is available when switching from the **DP2** / **DP3** series. 

**==> picture [201 x 173] intentionally omitted <==**

**----- Start of picture text -----**<br>
DP2  /  DP3<br>33<br>Front protective cover Remove<br>DPX-04  (Optional)<br>can be installed on<br>MS-DP1-4 .<br>><br>Remove<br>Insert<br>DP-100 -<br>Mounting holes<br>for  DP2  /  DP3  series<br>can be used as is.<br>Panel mounting bracket  MS-DP1-4<br>wr/ ;<br>An conversion bushing is available for when using the  DP-10 □<br>short pressure port type. It can be used to switch between this  Hf<br>OUT1<br>OUT2MODE<br>DP2-20<br>0-ADJ<br>ñ101.3kPa<br>**----- End of picture text -----**<br>


- An conversion bushing is available for when using the **DP-10** □ **-M** short pressure port type. It can be used to switch between this model and the **DP2** / **DP3** series. When connecting to the pressure port, use a M5 female thread        Rc >[1 ] / 8 female thread tightening torque of 1.0 N·m or less. 0 S0 Lin Zo Conversion bushing **MS-DP1-7** 

- The **MS-DP1-F** □ flat attachment is available. If using the **MS-DP1-F** □ flat attachment (optional), install by following the procedures given below. 

**==> picture [227 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
O     Decide the direction of this product to mount with the sensor.1<br>ce B£e Ss <<br>SED << BE OK BE<br>| Ws A CRS UR ORE<br>Pressure port  Pressure port  Pressure port<br>Cy faces downward faces leftward Cy ©) faces rightward<br>Note: It is not possible to mount this product such<br>that the pressure port faces upward.<br>Pressure port<br>( faces upward )<br>**----- End of picture text -----**<br>


- O Mount this product with the M3 female threads of the 2 sensor by using the attached M3 (length 8 mm 0.315 in) screws. The tightening torque should be 0.5 N·m or less. 

**==> picture [126 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
M3 female thread<br>M3 (length 8 mm 0.315 in)<br>screw (Accessory)<br>**----- End of picture text -----**<br>


**==> picture [48 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
M3 female thread<br>**----- End of picture text -----**<br>


- O Mount this product with the mounting surface by using 3 the attached M4 (length 20 mm 0.787 in) screws. The tightening torque should be 1.2 N·m or less. 

Groove - D gl, Sa Z Connector attached cable M4 (length 20 mm 0.787 in) screw (Accessory) Note: Take care that if the cable with connector is sticking out of the side groove of this product when mounting, the cable may disconnected. ~~———~~ 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

747 

Refer to p.1472 for general precautions. 

FIBER SENSORS 

LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 

MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

## **PRECAUTIONS FOR PROPER USE** 

## **Conditions in use for CE conformity** 

• The **DP-100** series is a CE conformity product complying with EMC Directive. The harmonized standard with regard to immunity that applies to this product is EN 61000-6-2 and the following condition must be met to conform  to that standard. 

## **Condition** 

- The line to connect with this sensor should be less than 30 m 98.425 ft. 

## **Piping** 

• If connecting a commercially-available 12 mm spanner0.472 in coupling to the pressure port, attach a 12 mm 0.472 in spanner (14 mm 

0.551 in spanner for **DP-100-E** type) to the hexagonal section of the pressure port to secure it, and tighten at a torque of 9.8 N·m or less. If it is 

tightened using excessive torque, it may damage the coupling or the pressure port. 

In addition, wrap sealing tape around the coupling when connecting it to prevent leaks. 

• If connecting a commercially-available joint to the pressure port of the **DP-10** □ **-M** , hold the main unit in your hand to steady it, and tighten to a torque of 1.0 N·m or less. If it is tightened to an excessive torque, the joint or the main unit may become damaged. 

• If connecting a commercially-available joint to the pressure port of the **MS-DP1-7** , tighten to a torque of 9.8 N·m or less. 

**==> picture [61 x 71] intentionally omitted <==**

**----- Start of picture text -----**<br>
14 mm 0.551 in<br>spanner<br>**----- End of picture text -----**<br>


- The tightening torque should be 1 N·m or less when connecting a coupling to the pressure port of **MS-DP1-FM** . 

## **Flat attachment** 

- Make sure to mount **MS-DP1-F** □ with the sensor properly. If it is not mounted properly, air leakage may occur. 

- Take care that the excessive mounting and dismounting of this product may cause deterioration of the O-ring. 

- If you touch the O-ring of **MS-DP1-F** □, or any scratch or dust, etc. is attached to it, air leakage may occur and the sensing performance may deteriorate. 

Take sufficient care when using and storing **MS-DP1-F** □. 

## **Others** 

- Use within the rated pressure range. 

- Do not apply pressure exceeding the pressure withstandability value. The diaphragm will get damaged and correct operation shall not be maintained. 

- Do not use during the initial transient time (0.5 sec. approx.) after the power supply is switched on. 

- Avoid dust, dirt, and steam. 

- Take care that the sensor does not come in direct contact with water, oil, grease, or organic solvents, such as, thinner, etc. 

- Do not insert wires, etc., into the pressure port. The 

- diaphragm will get damaged and correct operation shall not be maintained. 

- Do not operate the keys with pointed or sharp objects. 

## **RUN mode** 

## • This is the normal operating mode. 

|Setting item|Description|
|---|---|
|Threshold value<br>setting|The threshold values for ON / OFF operation can be<br>changed directly by pressing the increment key<br>(UP) and the decrement key (DOWN).|
|Zero-adjustment<br>function|This forces the pressure value display to be reset to zero when<br>the pressure port is open on the atmospheric pressure side.|
|Key lock function|Stops key operations from being accepted.|
|Peak hold /<br>bottom hold function|Displays the peak value and bottom value for fluctuating<br>pressure. The peak value appears in the main display,<br>and the bottom value appears in the sub display.|



## **MENU SETTING mode** 

- If the mode selection key is pressed and held for 2 seconds in RUN mode, the mode will switch to MENU SETTING mode. 

• If the mode selection key is pressed while a setting is being made, the mode will switch to RUN mode. In this case, the settings that have been changed will be entered. 

**==> picture [86 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pressure port<br>Coupling (Purchase separately.)<br>**----- End of picture text -----**<br>


• When connecting the coupling to the pressure port of **MS-DP1-FR/FE/FN** , hold the pressure port with a 14 mm 0.551 in spanner and make sure that the tightening torque is 9.8 N·m or less. 

In addition, in order to prevent any leakage, wind a sealing tape on the coupling when connecting. 

**==> picture [42 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
14 mm 0.551 in<br>spanner<br>**----- End of picture text -----**<br>


|Setting item|Description|
|---|---|
|Comparative output 1<br>output mode setting|Sets the output mode for comparative output 1.|
|Comparative output 2 output mode<br>setting (standard type only)|Sets the output mode for comparative output 2.|
|Analog output / external<br>input switching<br>(multi-function type only)|Allows switching between analog voltage output /<br>analog current output, and auto-reference input /<br>remote zero-adjust-ment input.|
|NO / NC switching|Sets normally open (NO) or normally closed (NC).|
|Response time setting|Sets the response time.<br>The response time can be selected from 2.5 ms,<br>5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms,<br>500 ms, 1,000 ms and 5,000 ms.|
|Display color switching<br>for main display|Allows the color for the main display to be changed.<br>The colors can be set to ‘red / green’ or ‘green / red’<br>to correspond to ON / OFF output, or it can be fixed<br>at ‘red’ or ‘green’ all the time.|
|Unit switching|Pressure unit can be changed.|



Note: Do not tighten the pressure port by holding the product with the spanner. It may cause the product breakage. 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

748 

FIBER SENSORS LASER SENSORS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

## **PRECAUTIONS FOR PROPER USE** Refer to p.1472 for general precautions. ~~i~~ 

## Refer to p.1472 for general precautions. 

## **PRO mode** 

**==> picture [57 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Table of codes<br>**----- End of picture text -----**<br>


- If the mode selection key is pressed and held for 5 seconds in RUN mode, the mode will switch to PRO mode. 

|PHOTO-<br>ELECTRIC<br>SENSORS<br>MICRO<br>PHOTO-<br>ELECTRIC<br>SENSORS<br>AREA<br>SENSORS<br>LIGHT<br>CURTAINS /<br>SAFETY<br>COMPONENTS<br>PRESSURE /<br>FLOW<br>SENSORS<br>INDUCTIVE<br>PROXIMITY<br>SENSORS<br>PARTICULAR<br>USE<br>SENSORS<br>SENSOR<br>OPTIONS<br>SIMPLE<br>WIRE-SAVING<br>UNITS<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>ADJ.<br>NO<br>OFF<br>OFF<br>P-1, Lo-1<br>NC<br>NO<br>Hi-1<br>NO<br>NC<br>P-2, Lo-2<br>NC<br>NO<br>Hi-2<br>NO<br>NC<br>NC<br>NC<br>NO<br>EASY<br>EASY<br>Analog voltage output  /<br>External input<br>NO / NC<br>switching<br>Comparative output 2<br>output mode<br>Comparative output 1<br>output mode<br>NO / NC<br>switching<br>Display color for<br>main display<br>Threshold<br>value display<br>Display<br>color linking<br>Code<br>1st digit<br>2nd digit<br>3rd digit<br>4th digit<br>Standard<br>type only<br>Multi-function<br>type<br>Standard type<br>Hysteresis<br>Hysteresis<br>Red<br>when ON<br>Comparative<br>output 1<br>Comparative<br>output 2<br>Comparative<br>output 1<br>Comparative<br>output 2<br>Comparative<br>output 1<br>Comparative<br>output 2<br>Comparative<br>output 1<br>Comparative<br>output 2<br>Green<br>when ON<br>Always<br>red<br>Always<br>green<br>Analog voltage<br>output<br>Auto-<br>reference<br>Remote<br>zero-adjustment<br>Analog current<br>output<br>Window<br>comparator<br>Window<br>comparator<br>~~a~~<br>~~eee~~<br>~~op~~<br>~~fT |~~<br>f**o**)<br>J ~~|]~~<br>~~ee ee ee~~<br>~~ey eeee~~<br>~~ee~~<br>~~0~~<br>~~ee ee~~<br>~~2 ee ee~~<br>~~ee ee~~<br>~~ee eeee~~<br>~~yo~~<br>ft|
|---|
|WIRE-SAVING<br>SYSTEMS|
|MEASURE-|
|MENT<br>SENSORS<br>STATIC|
|ELECTRICITY<br>PREVENTION|
|DEVICES|
|LASER<br>MARKERS<br>Code<br>5th digit<br>6th digit<br>7th digit<br>8th digit<br>Response time<br>Unit switching<br>Displayrefresh rate<br>ECO mode|
|PLC<br>2.5 ms<br>MPa<br>250 ms<br>OFF<br>5 ms<br>kPa<br>500 ms<br>STD<br>ul~~|~~|
|HUMAN<br>10 ms<br>kgf/cm2<br>1,000 ms<br>FULL<br>~~2~~|
|MACHINE<br>INTERFACES<br>25 ms<br>bar<br>—<br>—<br>~~i~~|
|ENERGY<br>CONSUMPTION<br>VISUALIZATION<br>COMPONENTS<br>FA<br>COMPONENTS<br>50 ms<br>psi<br>100 ms<br>mmHg<br>250 ms<br>inchHg<br>500 ms<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>—<br>~~r~~<br>~~5~~<br>~~b~~<br>~~7~~|
|MACHINE<br>1,000 ms<br>—<br>—<br>—<br>~~H~~|
|VISION<br>SYSTEMS<br>5,000 ms<br>—<br>—<br>—<br>~~q~~|
|UV<br>CURING<br>SYSTEMS<br>The CAD data in the dimensions can be downloaded from the website.<br>~~i~~|



- If the mode selection key is pressed while a setting is being made, the mode will switch to RUN mode. In this case, the settings that have been changed will be entered. 

## Setting item Description 

Changes the information in the sub display Sub display switching during RUN mode operation to the desired alphanumeric display. Display refresh rate Changes the display refresh rate for the switching pressure value displayed in the main display. Hysteresis fix value Sets the hysteresis for EASY mode and window switching comparator mode. (8 steps) Linked display color Allows the display color for the main display to switching be switched in line with the output operation for (standard type only) comparative output 1 or comparative output 2. Allows power consumption to be reduced by ECO mode setting dimming the display or turning it off. Allows the setting details to be checked via Setting check code codes. Allows the setting details for the master sensor Setting copy mode to be copied to slave sensors. Reset setting Resets the settings to the factory settings. 

~~i~~ **DIMENSIONS (Unit: mm in)** The CAD data in the dimensions can be downloaded from the website. **DP-10** □ ma Sensor 

**==> picture [500 x 289] intentionally omitted <==**

**----- Start of picture text -----**<br>
DP-10 □ Sensor<br>42.5<br>1.18130 1.00425.51.673 7.50.295 0.3749.5 0.78720 Connector | Europe 0.39410 0.2767<br>30 peat Sta 20 rly = 12 _ pas 14<br>1.181 0.787 0.472 0.551<br>G  [1] /8<br>OM © 4 f i R (PT) male thread  [1] /8 © - 4 f i male thread & ©<br>_ | 1.50.059 (North America: NPT  [1] /8) M3 female thread, 4  7 M5 female threa0.157 deedp :<br>DP-10 □ -M(P) | Sensor<br>30<br>1.18130 1.00425.51.181 4.50.177 0.78720<br>— resins<br>Ks - at 7"<br>30 ø8.3 20<br>1.181 ø0.327 0.787 connector<br>i enw 0 © | \e<br>1.5 M3 female thread, M5 female thread,<br>0.059 4 0.157 deep 4 0.157 deep<br>DP-11 □ -E-P-J ma Sensor<br>47.5<br>1.18130 1.00425.5 1.870 70.276 0.78720 M8 connector<br>9.5<br>30 rier i a 0.374 20<br>1.181 0.787 14<br>0.551<br>4.5 0.177<br>Se fo (COO | FOA<br>1.5 15 G  [1] /8 male thread M5 female thread<br>0.059 0.591 7 0.276 M3 female thread,<br>4 0.157 deep<br>**----- End of picture text -----**<br>


**DP-100 DP-M** 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

749 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 

SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS 

WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow **DP-100 DP-M** 

## **DIMENSIONS (Unit: mm in)** 

The CAD data in the dimensions can be downloaded from the website. 

## **MS-DP1-1** 

**==> picture [188 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
ø2.3<br>ø0.091<br>14.5 9.5<br>0.571 0.374 1<br>0.039<br>4.2 2-R2.1 R0.083<br>0.165 22<br>0.866<br>30 2-ø3.5 ø0.138<br>1.181<br>20<br>0.787<br>13<br>0.512<br>20 R13 5.3<br>0.787 R0.512 (         )0.209 44<br>5.5 1.732<br>t 0.079t 2 20 0.217<br>0.787<br>Material:  Cold rolled carbon steel (SPCC)<br>(Uni-chrome plated)<br>**----- End of picture text -----**<br>


Sensor mounting bracket (Optional) 

**==> picture [251 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions<br>Mounting drawing with  DP-10□<br>22 2-R2.1 R0.083<br>0.866 9.5<br>0.374<br>14.5<br>0.571<br>4.2<br>0.165 25.5<br>1.004 42.5<br>1.673<br>7.5 9.5<br>0.295 0.374<br>45<br>1.772 30 12<br>1.181 45 0.472<br>1.772 30<br>15 1.181<br>0.591 1.5<br>0.059<br>30 t 2<br>1.181 t 0.079<br>**----- End of picture text -----**<br>


Two M3 (length 6 mm 0.236 in) screws with washers are attached. 

## **MS-DP1-5** 

Sensor mounting bracket (Optional) 

## **Assembly dimensions** 

**==> picture [139 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
22.75<br>0.896<br>29.5 ø4.5<br>1.161 ø0.177<br>20 28<br>4.5 0.787 8.5 1.102<br>0.177 0.335<br>44.5<br>30 1.752<br>20 1.181<br>0.787<br>t 1.5<br>13.5 2-ø3.5 ø0.138 t 0.059<br>0.531<br>20<br>0.787<br>**----- End of picture text -----**<br>


Material:  Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M3 (length 6 mm 0.236 in) screws with washers are attached. 

## **MS-DP1-2   MS-DP1-3** 

## **Assembly dimensions** 

**==> picture [110 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  DP-10□<br>**----- End of picture text -----**<br>


**==> picture [52 x 46] intentionally omitted <==**

**==> picture [218 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.2 18.3 7.5 9.5<br>39.3 0.283 0.720 0.295 0.374<br>(         )1.547 11<br>34.5 0.433<br>1.358<br>Front<br>34.5 20 protection  12<br>1.358(         )0.787 cover 0.472<br>R(PT)  [1] /8<br>50 male thread<br>1.969 8.7<br>33.4 0.343 Panel thickness dimension<br>1.315 1 to 6 mm 0.039 to 0.236 in<br>33.4 Connector<br>1.315 M5 female thread,<br>4 0.157 deep<br>M3 female thread,<br>(52 2.047 max) 4 0.157 deep<br>View A<br>**----- End of picture text -----**<br>


**==> picture [212 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting drawing with  DP-10□-M<br>R6.75<br>R0.266<br>16<br>0.630<br>30<br>1.181<br>4.5<br>0.177<br>49.5<br>(         )1.949<br>ø8.3<br>ø0.327<br>20 49.5<br>0.787 28.5 1.949<br>1.122<br>1.5<br>ø4.5 0.059<br>ø0.177 20 4.5 28 t 1.5<br>0.787 0.177 1.102 t0.059<br>29.5 53.5<br>1.161 2.106<br>30<br>1.181<br>**----- End of picture text -----**<br>


Panel mounting bracket (Optional), Front protection cover (Optional) 

**==> picture [109 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
Panel cut-out dimensions<br>When 1 unit is installed<br>31−0.40<br>1.220 −0.0160<br>31−0.40<br>1.220 −0.0160<br>**----- End of picture text -----**<br>


**==> picture [240 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
When “n” units are installed horizontally in series When “n” units are installed vertically in series31−0.40<br>31 1.220 Xn + 3.5 0.138 X (n-1) 1.220 −0.0160<br>31−0.40<br>1.220 −0.0160<br>55 2.165 31 1.220 Xn + 3.5 0.138 X (n-1)<br>or more<br>55 2.165<br>or more<br>Note: The panel thickness should be  Note: The panel thickness should be<br>1 to 6 mm 0.039 to 0.236 in. 1 to 6 mm 0.039 to 0.236 in.<br>**----- End of picture text -----**<br>


Material:  POM (Panel mounting bracket) Polycarbonate (Front protection cover) 

Dual Display Digital Pressure Sensor **DP-100 SERIES Ver.2** 

750 

FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS 

PLC 

HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 

Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow 

**DP-100 DP-M** 

## **DIMENSIONS (Unit: mm in)** 

**==> picture [235 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
The CAD data in the dimensions can be downloaded from the website.<br>**----- End of picture text -----**<br>


**==> picture [502 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-DP1-4 Panel mounting bracket (Optional)<br>Assembly dimensions<br>Mounting drawing with  DP-10□ Panel cut-out dimensions<br>42.7 36<br>(         )1.5751.6814030 (         )0.3829.7 1.0436.5 26.51.4170.256 R  [1] /8 2.20556<br>1.181 3 0.118 male thread 1.41736 +0.5+0.02000<br>Connector<br>1.57540 1.18130 1.68142.7 Panel mountingbracket body 0.47212 M5 femalethreadSpacer 3.15080 1.41736 +0.5+000.020<br>Front protection cover<br>( DPX-04 ) 8<br>Panel thickness dimension 1 to 3.2 mm0.315 Panel mountingbracket<br>0.039 to 0.126 in<br>**----- End of picture text -----**<br>


Note: The panel tickness should be 1 to 32 mm 0.039 to 1.260 in. Material: Panel mounting bracket body • • •  Nylon 6 Panel mounting bracket • • •  Stainless steel (SUS304) Spacer • • •  Cold rolled carbon steel (SPCC)(Uni-chrome plated) 

**==> picture [239 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-DP1-FM Flat attachment (Optional)<br>**----- End of picture text -----**<br>


**==> picture [78 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-DP1-FR/FN/FE<br>**----- End of picture text -----**<br>


**==> picture [103 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Flat attachment (Optional)<br>**----- End of picture text -----**<br>


**==> picture [492 x 242] intentionally omitted <==**

**----- Start of picture text -----**<br>
Assembly dimensions  Assembly dimensions<br>Mounting drawing with  DP-10□-M Mounting drawing with  DP-10□-M<br>44.5 37 52.5<br>(         )1.752 1.457 (          )2.067 37<br>(        )0.94524 11.50.453 (          )0.94524 1 .457 11.50.453<br>30 11<br>30 11 1.181 0.433<br>44.51.181 24 0.433 2.06752.5 0.94524<br>1.752  0.945 6.5 0.256<br>6.5 0.256 5.5 0.217  13.5<br>5.5 0.217  0.531<br>2-ø4.3 ø0.169  20 2-ø4.3 14<br>0.9451.1810.7872430 Material: Enclosure •••Polybutylene0.68917.5 ø0.169  0.7870.9450.551202430 Product distinguishing mark MS-DP1-FRMS-DP1-FNMS-DP1-FE : 0 line: 1 line: 2 line 0.68917.5 8.50.335<br>terephthalate (PBT) 1.181<br>M5 female thread (Glass fiber reinforced) Pressure port Material: Enclosure [•••] Polybutylene terephthalate (PBT)<br>Pressure port •••Stainless steel G [1] /8 female thread (Note) (Glass fiber reinforced)<br>(SUS303) Pressure port [•••] Stainless steel (SUS303)<br>O-ring •••Hydrogenated Nitrile O-ring [•••] Hydrogenated Nitrile<br>Butadiene Rubber Butadiene Rubber (H-NBR)<br>Weight: 25 g approx. (flat attachment only)<br>8.5 0.335 (H-NBR)<br>Weight: 15 g approx. (flat attachment only) Two M3 (length 8 mm 0.315 in) screws, two M4<br>(length 20 mm 0.787 in) screws are attached.<br>Two M3 (length 8 mm 0.315 in) screws,<br>two M4 (length 20 mm 0.787 in) screws  Note:  MS-DP1-FR  has a Rc [1] /8 female thread.<br>are attached.           MS-DP1-FN  has a NPT [1] /8 female thread.<br>**----- End of picture text -----**<br>


**==> picture [239 x 186] intentionally omitted <==**

**----- Start of picture text -----**<br>
MS-DP1-7 Conversion bushing (Optional)<br>15.8<br>0.622<br>14<br>0.551<br>3.5 7.8<br>0.138 0.307 M5 male thread<br>0.5 Gasket<br>(          )0.020<br>11 0.433 10 0.394 8<br>0.315<br>Rc [1] /8 female thread<br>Material: Brass (Nickel plated)<br>Weight: 10 g approx.<br>**----- End of picture text -----**<br>


**==> picture [239 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
CN-14A(-R)-C□  Connector attached cable (Optional,  CN-14A-C2  is attached to the sensor)<br>L<br>(         )1.37835 (         )1.96950<br>8 8<br>(         )0.315 (         )0.315<br>ø3.7 ø0.146 cable<br>• Length L<br>Model No. Length L (mm in)<br>CN-14A(-R)-C1 1,000 39.370<br>CN-14A(-R)-C2 2,000 78.740<br>CN-14A(-R)-C3 3,000 118.110<br>CN-14A(-R)-C5 5,000 196.850<br>**----- End of picture text -----**<br>