DP-1012-01A

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **DP-1012-01A Datasheet** 

## **1 Introduction** 

## **1.1 Features** 

The DP-1012-01A is a colour active matrix TFT-LCD module using amorphous silicon thinfilm transistors (TFTs) as active switching devices. It features a 10.1-inch diagonally measured active area with a WUXGA resolution of 1920 × 1200 pixels. Each pixel is divided into red, green, and blue sub-pixels arranged in a vertical stripe configuration, enabling the display of 16.7 million colours. 

- 10.1" TFT-LCD with 1920 × 1200 resolution and CTP support 

- • 16.7M RGB colors for vivid display 

- Dual-channel LVDS interface for highspeed, reliable data transfer 

- High contrast ratio and transmittance 

- Integrated GT911 touch controller with I²C interface providing accurate and low-latency capacitive touch response 

- Supports up to 5-finger multi-touch 

The module integrates a TFT-LCD panel, display driver ICs, backlight unit, and a capacitive touch panel (CTP). Driven by the HX8290-B display drivers, it supports a dualchannel LVDS interface for stable, high-speed image transmission. Touch input is managed by the GT911 controller over an I²C interface, providing accurate, smooth, and responsive capacitive multi-touch functionality. 

- Meets RoHS requirements for environmental compliance 

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device, or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 1 Tai Seng Avenue, #0305, Singapore 4536464. Singapore Registered Company Number: 201542387H 

Copyright © Bridgetek Pte Ltd 

1 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **2 Part Numbers/Ordering Information** 

|**Part No.**|**Description**|
|---|---|
|DP-1012-01A|TFT Display 10.1 inch (1920 x 1200 resolution) with Capacitive Touch<br>Panel|



Copyright © Bridgetek Pte Ltd 

2 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

|**Contents**|**Contents**|
|---|---|
|**1**|**Introduction ............................................................1**|
|**1.1**<br>**Features ......................................................................... 1**||
|**2**|**Part Numbers/Ordering Information ......................2**|
|**3**|**General Specifications .............................................5**|
|**4**|**Hardware Description .............................................6**|
|**4.1**<br>**Pin Assignment .............................................................. 6**||
||4.1.1<br>TFT-LCD Interface Pin Assignment .................................................. 6|
||4.1.2<br>CTP Interface Pin Assignment ........................................................ 7|
|**5**|**Specifications ..........................................................8**|
|**5.1**<br>**Absolute Maximum Ratings ............................................ 8**||
||5.1.1<br>Electrical Absolute Maximum Ratings .............................................. 8|
||5.1.2<br>Environmental Absolute Maximum Ratings ...................................... 8|
|**5.2**<br>**Electrical Specifications .................................................. 8**||
||5.2.1<br>Electrical Characteristics ............................................................... 8|
||5.2.2<br>LED Backlight Specification ............................................................ 9|
||5.2.3<br>LVDS Electrical Characteristics ...................................................... 10|
|**5.3**<br>**Timing .......................................................................... 10**||
||5.3.1<br>LVDS Timing Specification ............................................................ 10|
||5.3.2<br>LVDS AC Timing Specification ....................................................... 11|
|**5.4**<br>**Power Sequence ........................................................... 12**||
|**5.5**<br>**Optical Specifications ................................................... 13**||
|**6**|**Reliability Test Items ............................................ 16**|
|**7**|**Dimension ............................................................. 17**|
|**8**|**Disclaimer Notice: Use of Third-Party Software or**|
|**Websites ................................................................... 18**||
|**9**|**Warranty Statement ............................................. 19**|
|**10**|**Contact Information ........................................... 20**|
|**Appendix A – References ........................................... 21**||



Copyright © Bridgetek Pte Ltd 

3 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

**Document References ........................................................... 21 Acronyms and Abbreviations ................................................ 21 Appendix B – List of Tables & Figures........................ 22 List of Tables ........................................................................ 22 List of Figures ....................................................................... 22 Appendix C – Revision History ................................... 23** 

Copyright © Bridgetek Pte Ltd 

4 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **3 General Specifications** 

|**Item**|**Specification**|**Unit**|**Note**|
|---|---|---|---|
|LCD Type|TFT|-||
|LCD Size|10.1|inch||
|Number of Pixels|1920(H) x 1200(V)|pixels||
|Display Mode|Normally Black|||
|Viewing Angle(CR>10)|80°/80°/80°/80°(typ.)|o’clock||
|Interface|2 port LVDS|||
|Display Colors|16.7MColors (RGB8 bit)|colors||
|Module Size|259(H)x 158(V)x 4.23(D)|mm||
|Active Area|216.8064(H)*135.504(V)|mm||
|Pixel Pitch|0.03764(H)×RGB×0.11292(V)|mm||
|Display Driver IC|HX8290-B|-||
|Touch Panel|Capacitive Touch Panel|-||
|Touch Driver IC|GT911|-||
|CTP Structure|G + G|-||
|TFT & CTP Bonding|Air bonding|||
|Surface Treatment|HC|||
|Operation Temperature|-20~70|°C||
|Storage Temperature|-30~80|°C||



**Table 2 - General Specifications** 

**Note:** Complies with environmental protection requirements and is RoHS compliant. 

Copyright © Bridgetek Pte Ltd 

5 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **4 Hardware Description** 

The DP-1012-01A features a 10.1-inch TFT-LCD with a 1920 × 1200 resolution, integrated with a capacitive touch panel directly bonded to the LCD. 

## **4.1 Pin Assignment** 

The interface connector pin configurations are described in the following sections. 

## **4.1.1 TFT-LCD Interface Pin Assignment** 

|**Pin no**|**Symbol**|**Type**|**Description**|
|---|---|---|---|
|1|VLED-|P|LED Cathode|
|2|VLED-|P|LED Cathode|
|3|VLED+|P|LED Anode|
|4|VLED+|P|LED Anode|
|5|NC|-|No Connection|
|6|GND|P|Ground|
|7|RXE3+|I|LVDS Data Input,Even Channel(+)|
|8|RXE3-|I|LVDS Data Input,Even Channel(-)|
|9|GND|P|Ground|
|10|RXE2+|I|LVDS Data Input,Even Channel(+)|
|11|RXE2-|I|LVDS Data Input,Even Channel(-)|
|12|GND|P|Ground|
|13|RXECLK+|I|LVDS Clock Input,Even Channel(+)|
|14|RXECLK-|I|LVDS Clock Input,Even Channel(-)|
|15|GND|P|Ground|
|16|RXE1+|I|LVDS Data Input,Even Channel(+)|
|17|RXE1-|I|LVDS Data Input,Even Channel(-)|
|18|GND|P|Ground|
|19|RXE0+|I|LVDS Data Input,Even Channel(+)|
|20|RXE0-|I|LVDS Data Input,Even Channel(-)|
|21|GND|P|Ground|
|22|RXO3+|I|LVDS Data Input,Odd Channel(+)|
|23|RXO3-|I|LVDS Data Input,Odd Channel(-)|
|24|GND|P|Ground|
|25|RXO2+|I|LVDS Data Input,Odd Channel(+)|
|26|RXO2-|I|LVDS Data Input,Odd Channel(-)|
|27|GND|P|Ground|
|28|RXOCLK+|I|LVDS Clock Input,Odd Channel(+)|
|29|RXOCLK-|I|LVDS Clock Input,Odd Channel(-)|
|30|GND|P|Ground|
|31|RXO1+|I|LVDS Data Input,Odd Channel(+)|
|32|RXO1-|I|LVDS Data Input,Odd Channel(-)|
|33|GND|P|Ground|
|34|RXO0+|I|LVDS Data Input,Odd Channel(+)|



Copyright © Bridgetek Pte Ltd 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

|35|RXO0-|I|LVDS Data Input,Odd Channel(-)|
|---|---|---|---|
|36|GND|P|Ground|
|37|I2C _SDA|I|Reserved for LCD manufacturer’s use(No Connection)|
|38|I2C _SCL|I|Reserved for LCD manufacturer’s use(No Connection)|
|39|VDD_OTP|P|Reserved for LCD manufacturer’s use(No Connection)|
|40|EEPEN|I|No Connection|
|41|VDD|P|Power Supply,3.3V(Typ.)|
|42|VDD|P|Power Supply,3.3V(Typ.)|
|43|VDD|P|Power Supply,3.3V(Typ.)|
|44|VDD|P|Power Supply,3.3V(Typ.)|
|45|VDD|P|Power Supply,3.3V(Typ.)|



**Table 3 - TFT-LCD Interface Pin Definition** 

## **4.1.2 CTP Interface Pin Assignment** 

## **I2C Interface Pin Definition, connector: FPC 0.5mm pitch 6pin** 

|**Pin no**|**Name**|**Type**|**Description**|
|---|---|---|---|
|1|SDA|I/O|I2C serial bus,data line(3.3V)|
|2|SCL|I/O|I2C serial bus,clock line(3.3V)|
|3|RES|I|Reset input(3.3V)|
|4|INT|O|Interrupt request to the host(3.3V)|
|5|GND|P|Ground|
|6|VDD_CTP|P|Power Supply,3.3V(Typ.)|



**Table 4 - CTP Interface Pin Definition** 

Copyright © Bridgetek Pte Ltd 

7 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **5 Specifications** 

## **5.1 Absolute Maximum Ratings** 

The following values are absolute maximum ratings. Operation beyond these limits may cause malfunction or permanent damage to the device. 

## **5.1.1 Electrical Absolute Maximum Ratings** 

**==> picture [403 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Item|Symbol|MIN.|MAX.|Unit|Remarks|
|Power Supply Voltage|VDD|VSS-0.3|3.6|V|Ta=25°C|

**----- End of picture text -----**<br>


**Table 5 - Electrical Absolute Maximum Ratings** 

## **5.1.2 Environmental Absolute Maximum Ratings** 

**==> picture [424 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Item|Symbol|MIN.|MAX.|Unit|Remarks|
|Operating Temperature|TOP|-20|70|°C|
|Storage Temperature|TST|-30|80|°C|
|Operating Ambient Humidity|HOP|10|90|%RH|
|Storage Humidity|HST|10|90|%RH|

**----- End of picture text -----**<br>


**Table 6 - Environmental Absolute Maximum Ratings** 

## **5.2 Electrical Specifications** 

## **5.2.1 Electrical Characteristics** 

Condition: Ta=25±2°C 

**==> picture [433 x 175] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|es|Item|Symbol|Min.|Typ.|Max.|Unit|Note|
|VDD|3.0|3.3|3.6|V|
|ee|ss|
|Power Supply Voltage|VRP|-|-|300|mV|Ripple|
|es|es|ee|es|
|VDD_CTP|-|3.3|-|V|
|ee|es|es|ss|
|Power Supply Current|IDD|-|300|360|mA|Note 1|
|Po|es|ee|es|
|Power Consumption|PLCD|-|1|1.2|W|Note 2|
|Po|rrrrt—“‘<—<~i|et|
|es|Inrush Current|IRUSH|-|-|3.0|A|
|Input|VIH|2.7|-|3.3|V|
|CMOS|S|Voltage|Ree|VIL|es|0|rsee|-|es|0.5|ns|I|V|
|Interface|Output|VOH|2.7|-|3.3|V|
|i|Voltage|ee|VOL|es|0|ee|-|es|0.5|V|
|Table 7 - LCD Module Electrical Specifications|

**----- End of picture text -----**<br>


## **Note:** 

1. The supply is measured and specified at the LCM interface connector. Current consumption and power values are based on VDD = 3.3 V, frame rate fV = 60 Hz, and clock frequency = 80 MHz. Power supply current is measured under the following test patterns: 

Copyright © Bridgetek Pte Ltd 

8 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

- a) Typical: Mosaic 8 × 6 pattern (L0/L255) 

**Figure 1 - Mosaic 8x6 pattern** 

- b) Maximum: Skip sub-pixel (L255) 

**Figure 2 - Skip sub-pixel** 

2. The inrush current duration is approximately 2 ms and the power input rise time is 1 ms(min). 

## **5.2.2 LED Backlight Specification** 

|**Item**|**Symbol**|**Min.**|**Typ. **|**Max.**|**Unit**|**Remark**|
|---|---|---|---|---|---|---|
|LED Current|ILED|-|160|-|mA|Total LED|
|Forward Voltage|VF|18.9|22.4|24.5|V|IF=160mA|
|Reverse Current|IR|-|-|10|uA|VR=5V, 1 LED<br>Note 1|
|Power Dissipation|Pd|3584|||mW|Total LED|



**Table 8 - LED Backlight Specification** 

**Figure 3 - Backlight LED Circuit** 

## **Note:** 

The specified Reverse Voltage (Vr) and Reverse Current (Ir) are defined per LED. Since the backlight is a 7×7 array, the effective reverse voltage for a full string will scale accordingly. Only the full array terminals are accessible at the module level. 

Copyright © Bridgetek Pte Ltd 

9 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## «oYoy BridgetekBRIDGING= TECHNOLOGY 

## **5.2.3 LVDS Electrical Characteristics** 

||~~ee~~|~~eeeeeees~~|~~eeeeeees~~|~~eeeeeees~~|~~ee~~||
|---|---|---|---|---|---|---|
|**Item**<br>~~ee~~|**Symbol**<br>~~ee~~<br>~~ee~~<br>~~ee~~|**Values**<br>~~ee~~<br>~~eeeeeees~~|||**Unit**<br>~~ee~~<br>~~ee~~|**Note**<br>~~ee~~|
|||**Min.**<br>~~ee~~<br>~~ee~~|**Typ. **<br>~~ee~~<br>~~eee~~|**Max.**<br>~~ee~~<br>~~ees~~|||
|Differential Input High<br>Threshold Voltage<br>~~ee~~<br>~~es~~|Vth<br>~~ee~~<br>~~ee ~~<br>~~es~~<br>~~ee~~|-<br>~~ee~~<br> ~~ee ~~<br>~~es~~|-<br>~~ee~~<br> ~~eee ~~<br>~~es~~|0.1<br>~~ee~~<br> ~~ees ~~<br>~~es~~|V<br>~~ee~~<br> ~~ee~~<br>~~es~~|Vcm= 1.2V<br>~~ee~~<br>~~es~~|
|Differential Input Low<br>Threshold Voltage|Vtl<br>~~ee~~|-0.1|-|-|V||
|Differential Input Common<br>Threshold Voltage|Vcm|1|1.2|1.7-|Vid|/2|V||
|LVDS Input Voltage|Vinvl|0.7|-|1.7|V||
|Differential Input Voltage||Vid||0.35|-|0.6|V||
|Differential Input Leakage<br>Voltage|Iivleak|-10|-|10|uA||



**Table 9 - AC Electrical Characteristics** 

**Figure 4 - LVDS Electrical Characteristics** 

## **5.3 Timing** 

## **5.3.1 LVDS Timing Specification** 

|**Item**<br>~~ee~~|**Symbol**<br>~~ee~~<br>~~eee~~<br>~~ns~~|**Values**<br>~~——~~<br>~~ee~~<br>~~eeeeee~~|**Values**<br>~~——~~<br>~~ee~~<br>~~eeeeee~~|**Values**<br>~~——~~<br>~~ee~~<br>~~eeeeee~~|**Unit**<br>~~——~~|
|---|---|---|---|---|---|
|||**Min.**<br>~~——~~<br>~~ee~~<br>~~eee~~|**Typ. **<br>~~——~~<br>~~ee~~<br>~~eee~~|**Max.**<br>~~——~~<br>~~ee~~<br>~~eee~~||
|DCLK Frequency<br>~~rd~~<br>~~a~~|Fdclk<br>~~eee~~<br>~~rd~~<br>~~ns~~<br>~~rs~~<br>|74.5<br>~~eee ~~<br>~~rd~~<br>|77.56<br> ~~eee~~<br>~~rd~~<br>|85<br>~~eee~~<br>~~rd~~<br>|MHz<br>~~rd~~<br>|
|Horizontal DisplayArea<br>~~rs~~<br>~~a~~|Thd<br>~~ns~~<br>~~rs~~<br>~~rs~~<br>|960<br>~~rs~~<br>|||DCLK<br>~~rs~~<br>|
|HSYNC Period Time<br>~~a~~|Th<br>~~rs~~<br>|989<br>|1040<br>|1248<br>|DCLK<br>|
|Horizontal Blank<br>~~ass~~|tHB<br>~~rs~~<br>~~ss~~|29<br>~~ss~~|80<br>~~ss~~|288<br>~~ss~~|DCLK<br>~~ss~~|
|HSYNC Pulse Width<br>~~ss~~|Thp<br>~~ss~~|2<br>~~ss~~|10<br>~~ss~~|255<br>~~ss~~|DCLK<br>~~ss~~|
|HSYNC Back Porch<br>~~ss~~|Thbp<br>~~ss~~<br>~~ee~~|3<br>~~ss~~|6<br>~~ss~~|255<br>~~ss~~|DCLK<br>~~ss~~|
|HSYNC Front Porch<br>~~ee~~|Thfp<br>~~ee~~<br>~~ee~~<br>~~ee~~|24<br>~~ee~~|64<br>~~ee~~|260<br>~~ee~~|DCLK<br>~~ee~~|
|Vertical DisplayArea<br>~~rs~~|Tvd<br>~~ee~~<br>~~rs~~<br>~~ee~~<br>~~es~~|1200<br>~~rs~~|||H<br>~~rs~~|
|VSYNC Period Time<br>~~re~~|Tv<br>~~ee~~<br>~~re~~<br>~~es~~<br>~~re~~|1243<br>~~re~~|1243<br>~~re~~|1560<br>~~re~~|H<br>~~re~~|
|Vertical Blank<br>~~ee~~|TVB<br>~~es~~<br>~~ee~~<br>~~re~~|43<br>~~ee~~|43<br>~~ee~~|360<br>~~ee~~|H<br>~~ee~~|
|VSYNC Pulse Width<br>~~es~~|Tvp<br>~~re~~<br>~~es~~|4<br>~~es~~|4<br>~~es~~|20<br>~~es~~|H<br>~~es~~|
|VSYNC Back Porch<br>~~ss~~|Tvbp<br>~~ss~~|20<br>~~ss~~|20<br>~~ss~~|255<br>~~ss~~|H<br>~~ss~~|
|VSYNC Front Porch<br>~~ss~~|Tvfp<br>~~ss~~<br>~~es~~|19<br>~~ss~~|19<br>~~ss~~|260<br>~~ss~~|H<br>~~ss~~|
|Frequency<br>~~rs~~|fV<br>~~rs~~<br>~~es~~|-<br>~~rs~~|60<br>~~rs~~|-<br>~~rs~~|Hz<br>~~rs~~|



Copyright © Bridgetek Pte Ltd 

10 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

**Figure 5 - LVDS Timing Characteristic** 

## **5.3.2 LVDS AC Timing Specification** 

**Values Unit Remark Item Symbol** ~~__—————————es~~ **Min. Typ. Max.** CLK Frequency Frcip 20 - 85 MHz ~~ee Se~~ CLKIN Period tRCIP 11.76 - - nsec ~~ee~~ Input Data 0 tRIP1 tRCIP/7 x (-0.2) 0 tRCIP/7 x 0.2 nsec ~~es re rs ee~~ Input Data 1 tRIP0 tRCIP/7 x 0.8 tRCIP/7 tRCIP/7 x 1.2 nsec ~~ee~~ Input Data 2 tRIP6 tRCIP/7 x 1.8 ~~ss~~ tRCIP/7 x 2 tRCIP/7 x 2.2 nsec ~~ee~~ Input Data 3 tRIP5 tRCIP/7 x 2.8 tRCIP/7 x 3 tRCIP/7 x 3.2 nsec ~~ee~~ Input Data 4 tRIP4 tRCIP/7 x 3.8 tRCIP/7 x 4 tRCIP/7 x 4.2 nsec Input Data 5 tRIP3 tRCIP/7 x 4.8 tRCIP/7 x 5 tRCIP/7 x 5.2 nsec ~~ee Ge~~ Input Data 6 tRIP2 tRCIP/7 x 5.8 tRCIP/7 x 6 tRCIP/7 x 6.2 nsec ~~ee esss~~ **Table 11 - LVDS AC Timing Parameter** 

**Figure 6 - LVDS AC Timing Characteristic** 

Copyright © Bridgetek Pte Ltd 

11 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## wy«*N BridgetekBRIDGING. TECHNOLOGY 

## **5.4 Power Sequence** 

**Figure 7 - Power Sequence** 

|**Symbol**|**Values**|**Values**|**Values**|**Unit**|
|---|---|---|---|---|
||**Min.**|**Typ.**|**Max.**||
|T1|0|-|10|ms|
|T2|0|-|50|ms|
|T3|200|-|-|ms|
|T4|500|-|-|ms|
|T5|0|-|50|ms|
|T6|0|-|10|ms|
|T7|500|-|-|ms|



**Table 12 - Sequence Table** 

**Figure 8 - Power Sequence** 

Copyright © Bridgetek Pte Ltd 

12 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **5.5 Optical Specifications** 

The optical specifications shall be measured in a dark room (ambient luminance ≤ 1 lux, temperature = 25 ± 2 °C) using a luminance meter system (gonio-meter system and TOPCON BM-5). The test unit shall be positioned approximately 50 cm from the LCD surface at a viewing angle of θ and Φ = 0°. 

Viewing directions are defined as follows: 

- θØ = 0° (θ₃): 3 o’clock direction (“right”) 

- θØ = 90° (θ₁₂): 12 o’clock direction (“upward”) 

- θØ = 180° (θ₉): 9 o’clock direction (“left”) 

- θØ = 270° (θ₆): 6 o’clock direction (“bottom”) 

While scanning θ and/or Φ, the center of the measuring spot on the display surface shall remain fixed. 

|**Item**|**Symbol**|**Symbol**|**Condition**|**Min.**|**Typ. **|**Max.**|**Unit**|**Note**|
|---|---|---|---|---|---|---|---|---|
|Brightness|Bp||_θ_=0°|300|350|-|Cd/m2|2|
|Viewing Angle|θL||Cr≥10|70|80|-|Deg|Note 1|
||θR|||70|80|-|||
||ФT|||70|80|-|||
||ФB|||70|80|-|||
|Contrast Ratio|Cr||_θ_=0°<br>FF=0°|700|900|-|-|Note 2|
|Response Time|Tr+ Tf|||-|30|35|ms|Note 3|
|Color Coordinate of<br>CIE 1931|Red|x|_θ_=0°|-0.03|0.644|+0.03|-|@BOE BLU<br>Note 4|
|||y|||0.344||-||
||Green|x|||0.315||-||
|||y|||0.632||-||
||Blue|x|||0.157||-||
|||y|||0.054||-||
||White|x|||0.285||-||
|||y|||0.327||-||
|NTSC Ratio|NTSC||CIE 1931|-|72|-|%|@BOE BLU<br>Note 5|
|Polarization<br>Direction of<br>Front Polarizer|PdF||-|-|0|-|deg|Absorption axis<br>Note 6|
|Polarization<br>Direction of<br>Rear Polarizer|PdR|||-|90|-|deg||



**Table 13 - Optical Specifications** 

## **Note :** 

1. Definition of viewing angle: Refer to Figure 9 below, indicated by θ and Ф. 

Copyright © Bridgetek Pte Ltd 

13 

**DP-1012-01A Datasheet Version 1.0** 

**==> picture [107 x 31] intentionally omitted <==**

**----- Start of picture text -----**<br>
KY«*N BridgetekBRIDGING= TECHNOLOGY<br>**----- End of picture text -----**<br>


Document Reference No.: BRT_000479   Clearance No.: BRT#246 

**Figure 9 - Viewing Angle** 

2. Definition of contrast ratio: Contrast ratio is measured in optimum common electrode voltage. 

Contrast Ratio(CR) = 

𝐋𝐮𝐦𝐢𝐧𝐚𝐧𝐜𝐞 𝐰𝐡𝐞𝐧 𝐋𝐂𝐃 𝐢𝐬 𝐚𝐭 "White" state 

## 𝐋𝐮𝐦𝐢𝐧𝐚𝐧𝐜𝐞 𝐰𝐡𝐞𝐧 𝐋𝐂𝐃 𝐢𝐬 𝐚𝐭 "Black" state 

3. Definition of response time. (Test equipment: RD80S or similar equipment) The output signal and photo detector response are measured when the input signal changes from “black” to “white” (voltage falling time) and from “white” to “black” (voltage rising time), respectively. 

The response time is defined as the time interval between 10% and 90% of the signal amplitude. Refer to the figures below. 

**Figure 10 - Response Time** 

4. Color Coordinates of CIE 1931 : The Color Coordinates (CIE 1931) are measured at the center of the display. 

Test Conditions: - LED Current (ILED): 20 mA 

   - Measurement Location: On the surface of the LCD module at 25 °C 

   - Equipment: CS2000 or equivalent 

5. Definition of Color of CIE Coordinate and NTSC Ratio. 

𝐀𝐫𝐞𝐚 𝐨𝐟 𝐑𝐆𝐁 𝐭𝐫𝐢𝐚𝐧𝐠𝐥𝐞 S = x 100% 𝐀𝐫𝐞𝐚 𝐨𝐟 𝐍𝐓𝐒𝐂 𝐭𝐫𝐢𝐚𝐧𝐠𝐥𝐞 

Copyright © Bridgetek Pte Ltd 

14 

**DP-1012-01A Datasheet Version 1.0** 

**==> picture [237 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Document Reference No.: BRT_000479   Clearance No.: BRT#246<br>**----- End of picture text -----**<br>


**Figure 11 - Color of CIE Coordinate and NTSC Ratio** 

6. Definition of Polarization Direction 

   - Viewing Direction: Defined as the normal user viewing direction, perpendicular to the display surface. 

   - Front Polarizer: The polarizer closer to the viewer. 

   - Rear Polarizer: The polarizer on the side opposite the viewer. 

   - X-Axis: Defined as the line parallel to the top and bottom edges of the Active Area. 

   - PdF: Polarization degree of the Front Polarizer, indicated by the blue arrow. 

   - PdB: Polarization degree of the Rear Polarizer, indicated by the red arrow. 

   - Polarization Degree: Must be specified within a range of 0° to 180° according to the definitions above. 

**Figure 12 - Polarization Direction** 

Copyright © Bridgetek Pte Ltd 

15 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **6 Reliability Test Items** 

|**Test Item**|**Test Conditions**|
|---|---|
|High Temperature Storage Test|+80°C<br>240hrs|
|Low Temperature Storage Test|-30°C<br>240hrs|
|High Temperature Operation Test|+70°C<br>240hrs|
|Low Temperature Operation Test|-20°C<br>240hrs|
|High Temperature and High Humidity<br>(operation test)|High Temperature and High Humidity<br>+60°C, 90%RH<br>240hrs|
|Thermal Shock|-40°C~ +80°C<br>1hr/cycle, 100 cycles|



**Table 14 - Reliability Test Items** 

Copyright © Bridgetek Pte Ltd 

16 

**DP-1012-01A Datasheet Version 1.0** 

## *BRIDGING * ! 

**==> picture [237 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Document Reference No.: BRT_000479   Clearance No.: BRT#246<br>**----- End of picture text -----**<br>


**==> picture [345 x 564] intentionally omitted <==**

**----- Start of picture text -----**<br>
7 Dimension<br>50+ 0 ,.05 3<br>B.00+ 0 | re<br>—<br>Bs :<br>Re :<br>BS :<br>Re Hq<br>=:<br>sRS [i] H<br>BS :<br>Re :<br>= ;<br>34 , =<br>= : i)<br>= H dD<br>oe)94 lj; ot<br>2) ;<br>= : =<<br>$539354 :H ig?)=<br>= ; =<br>Bei aratetataterateterateterater orator areterareteretetereterers  it= —<br>wm<br>pa<br>Q.<br>LAK: ttt t | fap)<br>=<<br>hm.<br>7a=Oo<br>ee =g<br>CERES SOE | 8<br>S0 Es5 mmm a S<br>"SSSORSSSS |g2S :BoBS<br>PISANIPEERISABPSSRVSNSBPBeeoSSSSSRVSNY,SNESSSSSSOIS ROY CN ON)SH [2=e&=B2 ByBIx%sBo)=SBe%<br>CMSA & Bo<br>BRSBROSESSSO 3a2 Bobos &co<br>SSSTSsBPBESOOSSBRENMISASDSSBRBRSORSBESSBRONSONOBERSSESITSSOROS VSS SOY E SS ing&2 BaBSPeBSssBosBYBosByRoy3BIboBo OQ@=aa<=-<br>OSSBeaOSOOMSSSBESO RR | SN SBIseIBSBS<br>ORV By<br>o t o LIT<br>0.50+ 0 .05 I<br>**----- End of picture text -----**<br>


**==> picture [140 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Figure 13 - LCM Dimension<br>**----- End of picture text -----**<br>


Copyright © Bridgetek Pte Ltd 

17 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **8 Disclaimer Notice: Use of Third-Party Software or Websites** 

We may recommend use of software or web sites that are owned or operated by other companies. We offer or facilitate this recommendation by hyperlinks or other methods to aid your access to the third-party resource. While we endeavour to direct you to helpful, trustworthy resources, we cannot endorse, approve, or guarantee software, information, products, or services provided by or at a thirdparty resource or track changes in the resource. Thus, we are not responsible for the content or accuracy of any third-party resource or for any loss or damage of any sort resulting from the use of, or for any failure of, products or services provided at or from a third party resource. 

We recommend these resources on an “as is” basis. When you use a third party resource, you will be subject to its terms and licenses and no longer be protected by our privacy policy or security practices, which may differ from the third policy or practices or other terms. You should familiarize yourself with any license or use terms of, and the privacy policy and security practices of, the third party resource, which will govern your use of that resource. 

Copyright © Bridgetek Pte Ltd 

18 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **9 Warranty Statement** 

According to our after-sales policy, the warranty (if applicable) will be void under the following circumstances: 

- The device has been damaged due to human factors, such as dropping, impact, water exposure, or unauthorized disassembly/modification. 

- The device has malfunctioned due to improper use, mishandling, or usage beyond its intended design. 

- The device has been disassembled, repaired, or modified by unauthorized personnel. 

- Any other conditions that do not comply with our warranty policy. For details, please contact our sales team. 

Copyright © Bridgetek Pte Ltd 

19 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **10 Contact Information** 

Refer to https://brtchip.com/contact-us/ for contact information. 

## **Distributor and Sales Representatives** 

Please visit the Distribution Network – IC & Module (brtchip.com) page for the contact details of our distributor(s) and sales representative(s) in your country. 

System and equipment manufacturers and designers are responsible to ensure that their systems, and any Bridgetek Pte Ltd (BRTChip) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested Bridgetek devices and other materials) is provided for reference only. While Bridgetek has taken care to assure it is accurate, this information is subject to customer confirmation, and Bridgetek disclaims all liability for system designs and for any applications assistance provided by Bridgetek. Use of Bridgetek devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless Bridgetek from any and all damages, claims, suits, or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted, or reproduced in any material or electronic form without the prior written consent of the copyright holder. Bridgetek Pte Ltd, 1 Tai Seng Avenue, Tower A, #03-05, Singapore 536464. Singapore Registered Company Number: 201542387H. 

Copyright © Bridgetek Pte Ltd 

20 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **Appendix A – References** 

## **Document References** 

NA 

## **Acronyms and Abbreviations** 

|**Terms**|**Description**|
|---|---|
|BLU|Backlight Unit|
|CTP|Capacitive Touch Panel|
|DC|Direct Current|
|FPC|Flexible Printed Circuit|
|IC|Integrated Circuit|
|I2C|Inter-Integrated Circuit|
|LCD|Liquid Crystal Display|
|LCM|Liquid Crystal Module|
|LED|Light Emitting Diode|
|LEDA|Light Emitting Diode Anode|
|LEDK|Light Emitting Diode Cathode|
|LVDS|Low-Voltage Differential Signaling|
|TFT|Thin Film Transistor|



Copyright © Bridgetek Pte Ltd 

21 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **Appendix B – List of Tables & Figures** 

## **List of Tables** 

|Table 1 - Part Number/Ordering Information ..................................................................... 2|Table 1 - Part Number/Ordering Information ..................................................................... 2|
|---|---|
|Table 2 - General Specifications ...................................................................................... 5|Table 2 - General Specifications ...................................................................................... 5|
|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|
|Table 4 - CTP Interface Pin Definition ............................................................................... 7|Table 4 - CTP Interface Pin Definition ............................................................................... 7|
|Table 5 - Electrical Absolute Maximum Ratings .................................................................. 8|Table 5 - Electrical Absolute Maximum Ratings .................................................................. 8|
|Table 6 - Environmental Absolute Maximum Ratings .......................................................... 8|Table 6 - Environmental Absolute Maximum Ratings .......................................................... 8|
|Table 7 - LCD Module Electrical Specifications ................................................................... 8|Table 7 - LCD Module Electrical Specifications ................................................................... 8|
|Table 8 - LED Backlight Specification ............................................................................... 9|Table 8 - LED Backlight Specification ............................................................................... 9|
|Table 9 - AC Electrical Characteristics ............................................................................. 10|Table 9 - AC Electrical Characteristics ............................................................................. 10|
|Table 10 - LVDS Timing Parameter ................................................................................. 10|Table 10 - LVDS Timing Parameter ................................................................................. 10|
|Table 11 - LVDS AC Timing Parameter ............................................................................ 11|Table 11 - LVDS AC Timing Parameter ............................................................................ 11|
|Table 12 - Sequence Table ............................................................................................ 12|Table 12 - Sequence Table ............................................................................................ 12|
|Table 13 - Optical Specifications ..................................................................................... 13|Table 13 - Optical Specifications ..................................................................................... 13|
|Table 14 - Reliability Test Items ..................................................................................... 16|Table 14 - Reliability Test Items ..................................................................................... 16|



## **List of Figures** 

|**List of Figures**|**List of Figures**|
|---|---|
|Figure 1 - Mosaic 8x6 pattern ......................................................................................... 9|Figure 1 - Mosaic 8x6 pattern ......................................................................................... 9|
|Figure 2 - Skip sub-pixel ................................................................................................ 9|Figure 2 - Skip sub-pixel ................................................................................................ 9|
|Figure 3 - Backlight LED Circuit ....................................................................................... 9|Figure 3 - Backlight LED Circuit ....................................................................................... 9|
|Figure 4 - LVDS Electrical Characteristics ......................................................................... 10|Figure 4 - LVDS Electrical Characteristics ......................................................................... 10|
|Figure 5 - LVDS Timing Characteristic ............................................................................. 11|Figure 5 - LVDS Timing Characteristic ............................................................................. 11|
|Figure 6 - LVDS AC Timing Characteristic ........................................................................ 11|Figure 6 - LVDS AC Timing Characteristic ........................................................................ 11|
|Figure 7 - Power Sequence ............................................................................................ 12|Figure 7 - Power Sequence ............................................................................................ 12|
|Figure 8 - Power Sequence ............................................................................................ 12|Figure 8 - Power Sequence ............................................................................................ 12|
|Figure 9 - Viewing Angle ............................................................................................... 14|Figure 9 - Viewing Angle ............................................................................................... 14|
|Figure 10 - Response Time ............................................................................................ 14|Figure 10 - Response Time ............................................................................................ 14|
|Figure 11 - Color of CIE Coordinate and NTSC Ratio ............................................................ 15|Figure 11 - Color of CIE Coordinate and NTSC Ratio ............................................................ 15|
|Figure 12 - Polarization Direction .................................................................................... 15|Figure 12 - Polarization Direction .................................................................................... 15|
|Figure 13 - LCM Dimension ............................................................................................ 17|Figure 13 - LCM Dimension ............................................................................................ 17|



Copyright © Bridgetek Pte Ltd 

22 

**DP-1012-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000479   Clearance No.: BRT#246 

## **Appendix C – Revision History** 

Document Title: 

DP-1012-01A Datasheet 

Document Reference No.: BRT_000479 Clearance No.: BRT#246 - Product Page: https://brtchip.com/product category/products/ Document Feedback: Send Feedback 

|**Revision**|**Changes**|**Date**|
|---|---|---|
|Version 1.0|Initial Release|06-10-2025|



Copyright © Bridgetek Pte Ltd 

23