DP-0501-01A

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **DP-0501-01A Datasheet** 

## **1 Introduction** 

## **1.1 Features** 

The DP-0501-01A is a 5-inch TFT-LCD module featuring a resolution of 800 × 480 pixels. It integrates a TFT-LCD panel, driver ICs (ILI6122 and ILI5960), flexible printed circuit (FPC), backlight unit, and a capacitive touch panel (CTP). 

Touch input is managed by the FT5336 touch controller, which supports an I²C interface for seamless communication and enables smooth, responsive touch performance with support for up to five simultaneous touch points. 

- 5.0" TFT-LCD with 800 × 480 resolution and integrated capacitive touch panel (CTP) 

- Integrated FT5336 touch controller with I²C interface, supporting up to 5-point multitouch input 

- Supports 16.7M colors for vivid and accurate image reproduction 

- RGB interface ensuring stable and reliable signal transmission 

- Compliant with RoHS environmental requirements 

Designed to deliver 16.7 million colors via an RGB interface, the DP-0501-01A provides high-quality visual performance and reliable operation for a wide range of applications. 

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device, or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 1 Tai Seng Avenue, #0305, Singapore 4536464. Singapore Registered Company Number: 201542387H 

Copyright © Bridgetek Pte Ltd 

1 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **2 Part Numbers/Ordering Information** 

|**Part No.**|**Description**|
|---|---|
|DP-0501-01A|TFT Display5 inch(800*480 resolution)with Capacitive Touch Panel|
||**Table 1 - Part Number/Ordering Information**|



Copyright © Bridgetek Pte Ltd 

2 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

|**Table of Contents**|
|---|
|**1** **Introduction ............................................................1**|
|**1.1**<br>**Features ......................................................................... 1**|
|**2** **Part Numbers/Ordering Information ......................2**|
|**3** **General Specifications .............................................5**|
|**4** **Hardware Description .............................................6**|
|**4.1**<br>**Pin Assignment .............................................................. 6**|
|4.1.1<br>TFT-LCD Interface Pin Assignment .................................................. 6|
|**4.2**<br>**CTP Interface Pin Assignment ........................................ 7**|
|**5** **Specifications ..........................................................8**|
|**5.1**<br>**Absolute Maximum Ratings ............................................ 8**|
|5.1.1<br>Electrical Absolute Maximum Ratings .............................................. 8|
|5.1.2<br>Environmental Absolute Maximum Ratings ...................................... 8|
|**5.2**<br>**Electrical Specifications .................................................. 8**|
|5.2.1<br>Electrical Characteristics for TFT-LCD .............................................. 8|
|5.2.2<br>Electrical Characteristics for CTP .................................................... 9|
|5.2.3<br>LED Backlight Specification ............................................................ 9|
|**5.3**<br>**Timing Chart ................................................................ 10**|
|5.3.1<br>Horizontal Input Timing ............................................................... 10|
|5.3.2<br>Vertical Input Timing ................................................................... 10|
|**5.4**<br>**Optical Specifications ................................................... 11**|
|**6** **Reliability Test Items ............................................ 14**|
|**7** **Dimension ............................................................. 15**|
|**8** **Disclaimer Notice: Use of Third-Party Software or**|
|**Websites ................................................................... 16**|
|**9** **Warranty Statement ............................................. 17**|
|**10**<br>**Contact Information ........................................... 18**|
|**Appendix A – References ........................................... 19**|



Copyright © Bridgetek Pte Ltd 

3 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

**Document References ........................................................... 19 Acronyms and Abbreviations ................................................ 19 Appendix B – List of Tables & Figures........................ 20 List of Tables ........................................................................ 20 List of Figures ....................................................................... 20 Appendix C – Revision History ................................... 21** 

Copyright © Bridgetek Pte Ltd 

4 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **3 General Specifications** 

|**Item**|**Specification**|**Unit**|
|---|---|---|
|LCD Type|TFT|-|
|LCD Size|5|inch|
|Numberof Pixels|800(H)x 480(V)|pixels|
|TechnologyType|a-Si|-|
|Pixel Pitch|0.135(W)X0.135(H)|mm|
|DisplayMode|TN with NormallyWhite|-|
|SurfaceTreatment(UpPolarizer)An|Anti-Glare|-|
|ViewingDirection|12|o’clock|
|Gray Scale Inversion Direction|6|o’clock|
|Interface|24-bit RGB|-|
|Display Colors|16.7MColors (RGB8 bit)|colors|
|Module Size|136.80(H)x 93.60(V)x 5.00(D)|mm|
|Active Area|108.00(H) x 64.80(V)|mm|
|DisplayDriver IC|ILI6122&ILI5960|-|
|Touch Panel|Capacitive Touch Panel|-|
|Touch Driver IC|FT5336|-|
|CTPSupportedTouch Points|Up to 5 points|-|
|CTP Surface hardness|>6H|-|
|CTP Transparency|>85|%|
|Operation Temperature|-9~+60|°C|
|Storage Temperature|-20~+70|°C|



**Note:** Complies with environmental protection requirements and is RoHS compliant. 

Copyright © Bridgetek Pte Ltd 

5 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **4 Hardware Description** 

The DP-0501-01A features a 5-inch TFT-LCD with a 800 × 480 resolution, integrated with a capacitive touch panel. 

## **4.1 Pin Assignment** 

The interface connector pin configurations are described in the following sections. 

## **4.1.1 TFT-LCD Interface Pin Assignment** 

**- FPC: 0.5 mm pitch, 40 pin** 

|**Pin no**|**Symbol**|**Type**|**Description**|
|---|---|---|---|
|1|VLED-|P|LED backlight(Cathode)|
|2|VLED+|P|LED backlight(Anode)|
|3|NC|-|No Connection|
|4|VCC|P|Power Supply|
|5|R0|I|Red Data Input|
|6|R1|I|Red Data Input|
|7|R2|I|Red Data Input|
|8|R3|I|Red Data Input|
|9|R4|I|Red Data Input|
|10|R5|I|Red Data Input|
|11|R6|I|Red Data Input|
|12|R7|I|Red Data Input|
|13|G0|I|Green Data Input|
|14|G1|I|Green Data Input|
|15|G2|I|Green Data Input|
|16|G3|I|Green Data Input|
|17|G4|I|Green Data Input|
|18|G5|I|Green Data Input|
|19|G6|I|Green Data Input|
|20|G7|I|Green Data Input|
|21|B0|I|Blue Data Input|
|22|B1|I|Blue Data Input|
|23|B2|I|Blue Data Input|
|24|B3|I|Blue Data Input|
|25|B4|I|Blue Data Input|
|26|B5|I|Blue Data Input|
|27|B6|I|Blue Data Input|
|28|B7|I|Blue Data Input|
|29|GND|P|Ground|
|30|PCLK|I|Data Clock|
|31|DISP|I|Normal Displayand StandbyMode selectpin|
|32|HSYNC|I|Line Sync Signal|
|33|VSYNC|I|Frame Sync Signal|



Copyright © Bridgetek Pte Ltd 

6 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

|34|DE|I|Data Enable Pin|
|---|---|---|---|
|35|NC|-|No Connection|
|36|GND|P|Ground|
|37|NC|-|No Connection|
|38|NC|-|No Connection|
|39|NC|-|No Connection|
|40|NC|-|No Connection|



**Table 3 - TFT-LCD Interface Pin Definition** 

## **4.2 CTP Interface Pin Assignment** 

**I2C Interface Pin Definition, FPC: 0.5 mm pitch, 40-pin** 

|**Pin no**|**Symbol**|**Type**|**Description**|
|---|---|---|---|
|1|GND|P|Ground|
|2|SDA|I/O|I2C serial bus,data line(3.3V)|
|3|SCL|I/O|I2C serial bus,clock line(3.3V)|
|4|VDD|P|Power Supply|
|5|INT|O|Interruptpin|
|6|RST|I|Reset the touch controller|



**Table 4 - CTP Interface Pin Definition** 

Copyright © Bridgetek Pte Ltd 

7 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **5 Specifications** 

## **5.1 Absolute Maximum Ratings** 

## **5.1.1 Electrical Absolute Maximum Ratings** 

Condition: Ta=25°C 

|**Item **|**Symbol **|**MIN.**|**MAX.**|**Unit**|**Note**|
|---|---|---|---|---|---|
|Power Supply Voltage|VCC|-0.5|5.0|V|Note 1, 2|
|Backlight Forward Current|IF|-|25|mA|For each serial LED|
|PowerSupplyVoltageforCTP|VDD|-0.3|3.6|V||



**Table 5 - Electrical Absolute Maximum Ratings** 

## **Note:** 

1. Permanent damage to the LCD module may occur if operated beyond the specified limits. Operation beyond the specified electrical characteristics may lead to malfunction or reduced reliability. 

2. VCC must always be greater than Vss. 

## **5.1.2 Environmental Absolute Maximum Ratings** 

|**Item**|**Storage**|**Storage**|**Operating**|**Operating**|**Note**|
|---|---|---|---|---|---|
||**MIN.**|**MAX.**|**MIN.**|**MAX.**||
|Ambient Temperature|-20°C|70°C|-9°C|60°C|Note 1,2|



**Table 6 - Environmental Absolute Maximum Ratings** 

## **Note:** 

1. Response time decreases at low operating temperatures. 

2. Background color may vary slightly with ambient temperature; this phenomenon is reversible. 

## **5.2 Electrical Specifications** 

## **5.2.1 Electrical Characteristics for TFT-LCD** 

Condition: Ta=25°C 

|Condition: Ta=25°Ca=25°C=25°C25°C°CC|Condition: Ta=25°Ca=25°C=25°C25°C°CC|||||||
|---|---|---|---|---|---|---|---|
|**Item**||**Symbol**|**mbol**<br>**Min.**|**Typ. **|**Max.**|**Unit**|**Note**|
|Power Supply||VCC|3.0|3.3|3.6|V||
|Input<br>Voltage|‘H’|VIH|0.7* Vcc|0.7* Vcc<br>-|Vcc|V||
||‘L’|VIL|0|-|0.3*Vcc|V||
|Current Consumption<br>(Excluded the Backlight)||IDD|-|120|-|mA|VCC=3.3V<br>Black display pattern|



**Table 7 - Electrical Characteristics for TFT-LCD** 

Copyright © Bridgetek Pte Ltd 

8 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **5.2.2 Electrical Characteristics for CTP** 

|**Item**|**Item**|**Symbol**|**mbol**<br>**Min.**|**Typ. **|**Max.**|**Unit**|**Note**|
|---|---|---|---|---|---|---|---|
|Power Supply||VDD|2.8|-|3.6|V||
|Input<br>Voltage|‘H’|VIH|0.7* IOVDD|0.7* IOVDD<br>-|IOVDD|V||
||‘L’|VIL|-0.3|-|0.3*IOVDD|0.3*IOVDD<br>V||
|Output<br>Voltage|‘H’|VOH|0.7* IOVDD|0.7* IOVDD<br>-|-|V|IOH=-0.1mA|
||‘L’|VOL|-|-|0.3*IOVDD|0.3*IOVDD<br>V|IOH=0.1mA|



**Table 8 - Electrical Characteristics for CTP** 

## **5.2.3 LED Backlight Specification** 

The backlight consists of 18 white LEDs arranged in a 6 × 3 matrix, providing uniform illumination across the display. 

Condition: Ta=25°C 

|Condition: Ta=25°Ca=25°C=25°C25°C°CC|||||||
|---|---|---|---|---|---|---|
|**Item**|**Symbol**|**Min.**|**Typ. **|**Max.**|**Unit**|**Note**|
|Forward Current|IF|-|60|-|mA||
|Forward Voltage|VF|-|18.0|19.0|V|Note 2|
|Backlight Power<br>Consumption|WBBLB|-|1.08|-|W|Note 1|
|Life Time|-|20k|-|-|hours|Note 3|



**Table 9 - LED Backlight Specification** 

**Figure 1 - Backlight LED Circuit** 

## **Note:** 

1. The LED driving conditions are defined for the total backlight consumption and depend on the forward current (IF) setting. 

2. The forward voltage (VF) is provided for reference for a single LED string. 

3. The operating lifetime is defined as the time for the module brightness to decrease to 50% of its original brightness at Ta = 25 °C and IF = 60 mA. The LED lifetime may decrease if the operating IF larger than 60 mA. 

Copyright © Bridgetek Pte Ltd 

9 

**DP-0501-01A Datasheet** 

**Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

**==> picture [107 x 31] intentionally omitted <==**

**----- Start of picture text -----**<br>
¢YY .<br>«*N BridgetekBRIDGING TECHNOLOGY<br>**----- End of picture text -----**<br>


## **5.3 Timing Chart** 

## **5.3.1 Horizontal Input Timing** 

**Figure 2 - Horizontal Input Timing** 

|**Parameter**|**Parameter**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|
|---|---|---|---|---|---|---|
|Horizontal Display Area||tHD|-|800|-|CLKIN|
|CLKIN Frequency||FCLK|-|33.3|50|MHz|
|1 Horizontal Line Period||tH|862|1056|1200|CLKIN|
|HSD Pulse Width||tHPW|1|-|40|CLKIN|
|HSD Back Porch|SYNC|tHBP|46|46|46|CLKIN|
|HSD Front Porch|SYNC|tHFP|16|210|354|CLKIN|



**Table 10 - Horizontal Input Timing** 

## **5.3.2 Vertical Input Timing** 

**==> picture [164 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Figure 3 - Vertical Input Timing<br>**----- End of picture text -----**<br>


Copyright © Bridgetek Pte Ltd 

10 

**DP-0501-01A Datasheet** 

**Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

|**Parameter**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|
|---|---|---|---|---|---|
|Vertical Display Area|tVD|-|480|-|HSD|
|VSD Period time|tV|510|525|650|HSD|
|VSD Pulse Width|tVPW|1|-|20|HSD|
|VSD Back Porch|tVBP|23|23|23|HSD|
|VSD Front Porch|tVFP|7|22|147|HSD|



**Table 11 - Vertical Input Timing** 

## **5.4 Optical Specifications** 

Test Conditions: IF = 60mA , Ta = 25°C. 

|**Item**|**Symbol Condition**|**Symbol Condition**|**mbol Condition**|**Min.**|**Typ. **|**Max.**|**Unit**|**Note**|
|---|---|---|---|---|---|---|---|---|
|Luminance|L||_-_|350|420|-|Cd/m2|2<br>Note 1<br>Note 7|
|Uniformity|⊿Bp|||75|-|-|%|Note 1<br>Note 6|
|Viewing Angle|ΘT||Cr≥9|-|65|-|Deg|Note 2|
||ΘB|||-|55|-|||
||ΘL|||-|65|-|||
||ΘR|||-|65|-|||
|Contrast Ratio|Cr||_θ_=0°|400|500|-|-|Note 1<br>Note 3|
|Response Time|Tr||25°C|-|20|30|ms|Note 1<br>Note 4|
||Tf|||-|20|30|ms||
|Color of CIE Coordinate|W|x|Backlight is<br>ON|0.274|0.324|0.374|-|Note 1<br>Note 5|
|||y||0.295|0.345|0.395|-||
||R|X||0.544|0.594|0.644|-||
|||y||0.301|0.351|0.401|-||
||G|x||0.299|0.349|0.399|-||
|||y||0.531|0.581|0.631|-||
||B|x||0.092|0.152|0.202|-||
|||y||0.053|0.093|0.153|-||
|NTSC Ratio|S||_-_|45|50|-|%|Note 5|



**Table 12 - Optical Specifications** 

**Remark:** _**Parameters may vary slightly depending on temperature, driving voltage, and material.**_ 

## **Note:** 

1. Data Definition of the optical measurement system. Optical characteristics should be measured in a dark room. After 5 minutes of operation, the optical properties are measured at the center point of the LCD screen. All input terminals of the LCD panel must be grounded when measuring the center area of the panel. 

Copyright © Bridgetek Pte Ltd 

11 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

|**Item**|**Photo detector Field**|**Photo detector Field**|
|---|---|---|
|Contrast Ratio|BM-7A|1°|
|Luminance|||
|Chromaticity|||
|Luminance<br>Uniformity|||



**Figure 4 - Measurement Setup** 

2. Definition of Viewing Angle Range and Measurement System. The viewing angle is measured at the center point of the LCD using a CONOSCOPE (ERGO80). 

**Figure 5 - Viewing Angle** 

3. Definition of Contrast ratio. 

𝐋𝐮𝐦𝐢𝐧𝐚𝐧𝐜𝐞 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐝 𝐰𝐡𝐞𝐧 𝐋𝐂𝐃 𝐢𝐬 𝐨𝐧 𝐭𝐡𝐞 " White" 𝐬𝐭𝐚𝐭𝐞 Contrast ratio, Cr = 𝐋𝐮𝐦𝐢𝐧𝐚𝐧𝐜𝐞 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐝 𝐰𝐡𝐞𝐧 𝐋𝐂𝐃 𝐢𝐬 𝐨𝐧 𝐭𝐡𝐞 " Black" 𝐬𝐭𝐚𝐭𝐞 

“White” state: The state is that the LCD should drive by Vwhite. 

“Black” state: The state is that the LCD should drive by Vblack. Wwhite: To be determined. 

Vblack: To be determined. 

4. Definition of response time. 

   - The response time is defined as the LCD optical switching interval between the “White” and “Black” states. 

   - Rise time (Tr): The time required for the photo detector output intensity to change from 90% to 9%. 

   - Fall time (Tf): The time required for the photo detector output intensity to change from 9% to 90%. 

Copyright © Bridgetek Pte Ltd 

12 

**DP-0501-01A Datasheet Version 1.0** 

**==> picture [107 x 31] intentionally omitted <==**

**----- Start of picture text -----**<br>
_Y ><br>«*N BridgetekBRIDGING TECHNOLOGY<br>**----- End of picture text -----**<br>


Document Reference No.: BRT_000503   Clearance No.: BRT#263 

**Figure 6 - Definition of Response Time** 

5. Definition of color chromaticity (CIE1931). 

Color coordinates measured at center point of LCD. 

6. Definition of Luminance Uniformity. 

   - Active area is divided into 9 measuring area. Every measuring point is placed at the center of each measuring area. 

𝐋𝐦𝐢𝐧 Luminance Uniformity,U = 

𝐋𝐦𝐚𝐱 

Lmax: The measured Maximum luminance of all measurement position. Lmin: The measured Minimum luminance of all measurement position. 

**Figure 7 - Measuring Area for Luminance Uniformity** 

7. Definition of Luminance. 

Measure the luminance of white state at center point. 

Copyright © Bridgetek Pte Ltd 

13 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **6 Reliability Test Items** 

|**Test Item**|**Test Conditions**|
|---|---|
|High Temperature Operation|High Temperature OperationTemperature: +60°C<br>Duration: 240hrs|
|Low Temperature Operation|Temperature: -9°C<br>Duration: 240hrs|
|High Temperature Storage|Temperature: +70°C<br>Duration: 240hrs|
|Low Temperature Storage|Temperature: -20°C<br>Duration: 240hrs|
|Storage at High<br>Temperature and Humidity|Temperature and Humidity<br>Temperature: +40°C<br>Humidity: 90%RH max<br>Duration: 240hrs|
|Thermal Shock<br>(non-operation)|Temperature Range: -20°C (30min) ~ +70°C (30min)<br>Transfer Time: 5min<br>Cycles: 90 cycles<br>Start with cold temperature, end with high temperature.|
|ESD|Capacitance: 150pF, Resistance: 330ohm, 5point/panel<br>Air Discharge: ±8kV, 5 times<br>Contact Discharge: ±4kV, 5 times<br>Environment: 15°C~35°C, 30%~60%, 86kpa~96kpa|
|Vibration Test|Frequency range: 9Hz ~ 55Hz<br>Stroke: 1.5mm<br>Sweep: 9Hz ~ 55Hz ~ 9Hz<br>Duration: 2 hrs per axis (X, Y, Z)|
|Mechanical Shock<br>(non-operation)|Waveform: Half-sine wave<br>Peak Acceleration: 90G<br>Pulse Duration: 6ms<br>Directions: ±X,±Y,±Z, 3 times each|



Copyright © Bridgetek Pte Ltd 

14 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **7 Dimension** 

**Figure 8 - LCM Dimension** 

Copyright © Bridgetek Pte Ltd 

15 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **8 Disclaimer Notice: Use of Third-Party Software or Websites** 

We may recommend use of software or web sites that are owned or operated by other companies. We offer or facilitate this recommendation by hyperlinks or other methods to aid your access to the third-party resource. While we endeavour to direct you to helpful, trustworthy resources, we cannot endorse, approve, or guarantee software, information, products, or services provided by or at a thirdparty resource or track changes in the resource. Thus, we are not responsible for the content or accuracy of any third-party resource or for any loss or damage of any sort resulting from the use of, or for any failure of, products or services provided at or from a third party resource. 

We recommend these resources on an “as is” basis. When you use a third party resource, you will be subject to its terms and licenses and no longer be protected by our privacy policy or security practices, which may differ from the third policy or practices or other terms. You should familiarize yourself with any license or use terms of, and the privacy policy and security practices of, the third party resource, which will govern your use of that resource. 

Copyright © Bridgetek Pte Ltd 

16 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **9 Warranty Statement** 

According to our after-sales policy, the warranty (if applicable) will be void under the following circumstances: 

- The device has been damaged due to human factors, such as dropping, impact, water exposure, or unauthorized disassembly/modification. 

- The device has malfunctioned due to improper use, mishandling, or usage beyond its intended design. 

- The device has been disassembled, repaired, or modified by unauthorized personnel. 

- Any other conditions that do not comply with our warranty policy. For details, please contact our sales team. 

Copyright © Bridgetek Pte Ltd 

17 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **10 Contact Information** 

Refer to https://brtchip.com/contact-us/ for contact information. 

## **Distributor and Sales Representatives** 

Please visit the Distribution Network – IC & Module (brtchip.com) page for the contact details of our distributor(s) and sales representative(s) in your country. 

System and equipment manufacturers and designers are responsible to ensure that their systems, and any Bridgetek Pte Ltd (BRTChip) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested Bridgetek devices and other materials) is provided for reference only. While Bridgetek has taken care to assure it is accurate, this information is subject to customer confirmation, and Bridgetek disclaims all liability for system designs and for any applications assistance provided by Bridgetek. Use of Bridgetek devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless Bridgetek from any and all damages, claims, suits, or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted, or reproduced in any material or electronic form without the prior written consent of the copyright holder. Bridgetek Pte Ltd, 1 Tai Seng Avenue, Tower A, #03-05, Singapore 536464. Singapore Registered Company Number: 201542387H. 

Copyright © Bridgetek Pte Ltd 

18 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **Appendix A – References** 

## **Document References** 

NA 

## **Acronyms and Abbreviations** 

|**Terms**|**Description**|
|---|---|
|CTP|Capacitive Touch Panel|
|ESD|Electrostatic Discharge|
|FPC|Flexible Printed Circuit|
|IC|Integrated Circuit|
|I2C|Inter-Integrated Circuit|
|LCD|Liquid Crystal Display|
|LCM|Liquid Crystal Module|
|LED|Light Emitting Diode|
|LEDA|Light Emitting Diode Anode|
|LEDK|Light Emitting Diode Cathode|
|TFT|Thin Film Transistor|



Copyright © Bridgetek Pte Ltd 

19 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **Appendix B – List of Tables & Figures** 

## **List of Tables** 

|Table 1 - Part Number/Ordering Information ..................................................................... 2|Table 1 - Part Number/Ordering Information ..................................................................... 2|
|---|---|
|Table 2 - General Specifications ...................................................................................... 5|Table 2 - General Specifications ...................................................................................... 5|
|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|
|Table 4 - CTP Interface Pin Definition ............................................................................... 7|Table 4 - CTP Interface Pin Definition ............................................................................... 7|
|Table 5 - Electrical Absolute Maximum Ratings .................................................................. 8|Table 5 - Electrical Absolute Maximum Ratings .................................................................. 8|
|Table 6 - Environmental Absolute Maximum Ratings .......................................................... 8|Table 6 - Environmental Absolute Maximum Ratings .......................................................... 8|
|Table 7 - Electrical Characteristics for TFT-LCD ................................................................. 8|Table 7 - Electrical Characteristics for TFT-LCD ................................................................. 8|
|Table 8 - Electrical Characteristics for CTP ........................................................................ 9|Table 8 - Electrical Characteristics for CTP ........................................................................ 9|
|Table 9 - LED Backlight Specification ............................................................................... 9|Table 9 - LED Backlight Specification ............................................................................... 9|
|Table 10 - Horizontal Input Timing ................................................................................. 10|Table 10 - Horizontal Input Timing ................................................................................. 10|
|Table 11 - Vertical Input Timing ..................................................................................... 11|Table 11 - Vertical Input Timing ..................................................................................... 11|
|Table 12 - Optical Specifications ..................................................................................... 11|Table 12 - Optical Specifications ..................................................................................... 11|
|Table 13 - Reliability Test Items ..................................................................................... 14|Table 13 - Reliability Test Items ..................................................................................... 14|



## **List of Figures** 

|Figure 1 - Backlight LED Circuit ....................................................................................... 9|Figure 1 - Backlight LED Circuit ....................................................................................... 9|Figure 1 - Backlight LED Circuit ....................................................................................... 9|
|---|---|---|
|Figure 2 - Horizontal Input Timing .................................................................................. 10|Figure 2 - Horizontal Input Timing .................................................................................. 10|Figure 2 - Horizontal Input Timing .................................................................................. 10|
|Figure 3 - Vertical Input Timing ...................................................................................... 10|Figure 3 - Vertical Input Timing ...................................................................................... 10|Figure 3 - Vertical Input Timing ...................................................................................... 10|
|Figure 4 - Measurement Setup ....................................................................................... 12|Figure 4 - Measurement Setup ....................................................................................... 12|Figure 4 - Measurement Setup ....................................................................................... 12|
|Figure 5 - Viewing Angle ............................................................................................... 12|Figure 5 - Viewing Angle ............................................................................................... 12|Figure 5 - Viewing Angle ............................................................................................... 12|
|Figure 6 - Definition of Response Time ............................................................................ 13|Figure 6 - Definition of Response Time ............................................................................ 13|Figure 6 - Definition of Response Time ............................................................................ 13|
|Figure 7 - Measuring Area for Luminance Uniformity ......................................................... 13|Figure 7 - Measuring Area for Luminance Uniformity ......................................................... 13|Figure 7 - Measuring Area for Luminance Uniformity ......................................................... 13|
|Figure 8 - LCM Dimension .............................................................................................. 15|Figure 8 - LCM Dimension .............................................................................................. 15|Figure 8 - LCM Dimension .............................................................................................. 15|



Copyright © Bridgetek Pte Ltd 

20 

**DP-0501-01A Datasheet Version 1.0** 

Document Reference No.: BRT_000503   Clearance No.: BRT#263 

## **Appendix C – Revision History** 

Document Title: 

DP-0501-01A Datasheet 

Document Reference No.: BRT_000503 Clearance No.: BRT#263 - Product Page: https://brtchip.com/product category/products/ Document Feedback: Send Feedback 

|**Revision**|**Changes**|**Date**|
|---|---|---|
|Version 1.0|Initial Release|07-11-2025|



Copyright © Bridgetek Pte Ltd 

21