DNR30US12

**5-60 Watts** 

xppower.com 

## **DNR Series** 

- Rugged Design for Industrial Applications 

- Up to 89% Efficiency 

- Full Power to +60 °C 

- Wide Adjustment Range 

- DC OK 24 V Models 

- DC Standby Versions 

- 3 Year Warranty 

## ~~**Specification**~~ 

## **Input** 

- Input Voltage • 90-264 VAC, 120-375 VDC (DNR05/10/18) 85-264 VAC, 90-375 VDC (DNR30/60) 

- Input Frequency • 47-63 Hz Input Current • See tables Inrush Current • 5-18 W: 15/30 A at 115/230 VAC 30 W: 20/40 A at 115/230 VAC 60 W: 30/60 A at 115/230 VAC 

- Power Factor • EN61000-3-2, class A Earth Leakage Current • 0.8 mA max Input Protection • Internal fuse T2A, 250 VAC fitted in line 

## **Output** 

- Output Voltage • See tables Output Voltage Trim • See tables Initial Set Accuracy • ±1% Minimum Load • No minimum load required Start Up Delay • <1 s (may increase at low temperature extremes) 

- Start Up Rise Time • <150 ms Hold Up Time • 30/130 ms at 115/230 VAC (DNR05) 25/100 ms at 115/230 VAC (DNR10) 20/75 ms at 115/230 VAC (DNR18) 20/30 ms at 115/230 VAC (DNR30) 20/30 ms at 115/230 VAC DNR60) 

- Line Regulation • 5-18 W: ±1.0% max 30-60 W: ±0.5% max 

- Load Regulation • 5-18 W: ±2.0% max 30-60 W: ±0.5% max 

- Parallel Operation • Redundancy module DPM10 available for load currents up to 10 A (not with standby system), contact sales 

- Transient Response • 4% max deviation recovery to within 1% in 2 ms for a 50% load change 

- Ripple & Noise • 50 mV pk-pk, 20 MHz bandwidth (may increase at low temperature extremes) 

- Overvoltage Protection • Output clamps at 120-145% Vnom, auto recovery 

- Overload Protection • 110-165% constant current (DNR05-18) 105-150% power limited (DNR30/60) 

Short Circuit Protection • Power limited, auto recovery Temperature • ±0.03%/°C Coefficient 

## **Safety** 

- Safety Approvals • CE & UKCA meets all applicable directives & legislation 

## **General** 

- Efficiency • See tables Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground 

- Switching Frequency • 132 KHz typical, 55-90 kHz (DNR60) Signals • DC ON indicator LED Green: All models DC LOW indicator LED Red: 5-18 W models DC OK: 24 V 30-60 W models DC OK: All standby models 

- MTBF • 800 kHrs typical Bellcore, Issue 6 at +40 °C, GB  (DNR05/10/18), 530 kHrs typical Bellcore, Issue 6 at +40 °C, GB (DNR30/60) 

   - DC ON indicator LED Green: All models DC LOW indicator LED Red: 5-18 W models DC OK: 24 V 30-60 W models DC OK: All standby models 

- DIN Rail • Compatible with TS35/7.5 or TS35/15 

## **Environmental** 

- Operating Temperature • -20 °C to +70 °C (DNR05/10/18) -40 °C to +70 °C, start up at -35 °C (DNR30/60), all units derate linearly from 60 °C (see derating curves) 

- Cooling • Convection-cooled with 25mm free space all sides 

- Operating Altitude • 5000m Operating Humidity • 20-95% RH, non-condensing Storage Temperature • -25 °C to +85 °C (DNR05/10/18) -40 °C to +85 °C (DNR30/60) 

- Shock • 15 g, 11 ms, X, Y & Z axis, 3 shocks/axis in both directions 

- Vibration • 2 g, 10 Hz to 500 Hz, along X, Y & Z axis, 60 mins/axis, mounted on rail 

## **EMC & Safety** 

- Emissions • EN55022, level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 4, Perf Criteria A Radiated Immunity • EN61000-4-3, level 3, Perf Criteria A EFT/Burst • EN61000-4-4, level 4, Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A 

- Conducted Immunity • EN61000-4-6, level 3, Perf Criteria A Magnetic Field • EN61000-4-8, level 4 Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B 

- Safety Approvals • EN62368-1, UL508 Pollution Degree 2, UL1310 class 2 power recognised. See note 3 & ratings table, UL62368-1, cUL62368-1 Overvoltage Category II, UL508 Overvoltage Category III, ANSI/ISA 12.12.01. Class 1, Division 2 Groups A,B,C and D DNR30 & DNR60: SEMI F47 

. 

## ~~**Models and Ratings**~~ 

## **DNR05-60** 

|Output<br>Voltage|Input Current(typ.)|Input Current(typ.)|Output<br>Voltage Trim|Output Current|Efficiency (typ.)|Model Number<br>~~XP |~~|
|---|---|---|---|---|---|---|
||115 VAC|230 VAC|||||
|5 V|0.12 A|0.08 A|4.50-5.75 V|1.000 A|69%|DNR05US05<br>~~XP |~~|
|12 V|0.12 A|0.08 A|10.80-13.80 V|0.420 A|72%|DNR05US12<br>~~XP |~~|
|15 V|0.12 A|0.08 A|13.50-17.25 V|0.340 A|72%|DNR05US15<br>~~XP |~~|
|24 V|0.12 A|0.08 A|21.60-28.80 V|0.210 A|72%|DNR05US24<br>~~XP |~~|
|5 V|0.20 A|0.13 A|4.50-5.75 V|2.000 A|73%|DNR10US05<br>~~XP |~~|
|12 V|0.20 A|0.13 A|10.80-13.80 V|0.840 A|75%|DNR10US12<br>~~XP | ~~|
|15 V|0.20 A|0.13 A|13.50-17.25 V|0.670 A|76%|DNR10US15|
|24 V|0.20 A|0.13 A|21.60-28.80 V|0.420 A|76%|DNR10US24|
|5 V|0.36 A|0.21 A|4.50-5.75 V|3.000 A|75%|DNR18US05|
|12 V|0.36 A|0.21 A|10.80-13.80 V|1.500 A|77%|DNR18US12|
|15 V|0.36 A|0.21 A|13.50-17.25 V|1.200 A|77%|DNR18US15|
|24 V|0.36 A|0.21 A|21.60-28.80 V|0.750 A|77%|DNR18US24|
|5 V|0.56 A|0.33 A|5.00-5.50 V|6.000 A|79%|DNR30US05(2,3)|
|12 V|0.56 A|0.33 A|12.00-14.00 V|2.500 A|84%|DNR30US12(2,3)|
|24 V|0.56 A|0.33 A|24.00-28.00 V|1.250 A|86%|DNR30US24(2,3)|
|48 V|0.56 A|0.33 A|48.00-55.00 V|0.625 A|86%|DNR30US48(2,3)|
|5 V|1.10 A|0.59 A|5.00-5.50 V|10.000 A|79%|DNR60US05(2,3)|
|12 V|1.10 A|0.59 A|12.00-14.00 V|5.000 A|86%|DNR60US12(2,3)|
|24 V|1.10 A|0.59 A|24.00-28.00 V|2.500 A|89%|DNR60US24(2,3)|
|48 V|1.10 A|0.59 A|48.00-55.00 V|1.250 A|89 %|DNR60US48(2,3)|



## ~~**Notes**~~ 

_1. 30-60 W models are suitable for battery-charging applications. Available for OEM quantities, contact sales._ 

_2. Approved to UL1310, but 5 & 12 V not Class 2 Power recognised._ 

_3. SEMI F47 compliant._ 

## ~~**Derating Curves**~~ 

**==> picture [350 x 288] intentionally omitted <==**

**----- Start of picture text -----**<br>
,<br>DNR05-18 W Models 100 A<br>a<br>80 PoP NN<br>a Qe<br>60 aQe<br>a<br>40 QOa Qs ee<br>20 Poa Qe ss<br>0 po<br>-20 0 10 20 30 40 50 60 70<br>DNR30-60 W Models 100 PoPe<br>80 PoNN<br>Po<br>60 aa QQ<br>40 a GG<br>a<br>20 Po<br>Po<br>0 a Qs<br>-40 0 10 20 30 40 50 60 70<br>Ambient Temp (˚C)<br>Load (%)<br>Load (%)<br>**----- End of picture text -----**<br>


**DNR05-60** 

## ~~**Mechanical Details**~~ 

**DNR05/10/18 W Models** 

**==> picture [243 x 216] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.89<br>4.53 (115.0)<br>(22.5)<br>2 1<br>-V +V<br>DC<br>Sem Output NE<br>O DC LO<br>3.48 ON<br>(88.5) ( @<br>\<br>Voltage<br>Trim<br>N L<br>1 3<br>e—| | !<br>AC Input<br>**----- End of picture text -----**<br>


## ~~**Notes**~~ 

1. All dimensions in inches (mm). 

2. Weight 0.33 lb (150 g) approx. 

3. Tolerance: ±0.02 (0.5) maximum. 

4. Connection screw maximum torque: Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm) 

|DNR05, 10, 18  Connections|DNR05, 10, 18  Connections|DNR05, 10, 18  Connections|
|---|---|---|
|Conn|Pin|Designation|
|AC<br>Input|1|Ground|
||2|Neutral|
||3|Line|
|DC<br>Output|1|Positive|
||2|Negative|



## **30/60 W Models** 

**==> picture [525 x 301] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.59<br>4.53 (115.0)<br>(40.5)<br>5 1<br>-V -V +V +V DC<br>OK<br>DC Output<br>aii<br>Voltage<br>Trim<br>3.60 |<br>(90.0)<br>ON<br>N L<br>1 3<br>eee] | W llllanaeenegennagnnr DNR30/60 Connections<br>AC Input Conn Pin Designation<br>1 Ground<br>AC<br>2 Neutral<br>Input 3 Line<br>1 DC OK*<br>2 Positive<br>DC<br>3 Positive<br>Notes Output 4 Negative<br>1. All dimensions in inches (mm). 2. Weight 0.8 lb (350 g) approx.  [|e ©@] | | PUB 4. Connection screw maximum torque:  Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm) AAHAHAH | _ 5 Negative<br>3. Tolerance: ±0.02 (0.5) maximum.  * 24 V and standby models only.<br>**----- End of picture text -----**<br>


**DNR05-60** 

~~**Standby Versions**~~ 

**==> picture [523 x 194] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 [ eee@4]] 1 Maximum current drain from battery by PSU when inactive 22 mA<br>-V -V +V +V DC +V<br>OK DNR30/60 Connections<br>DC Output +V Conn Pin Designation<br>DC OK 1 Ground<br>Voltage AC Input 2 Neutral<br>Trim 3 Line<br>D1 Relay 1 DC OK<br>Control<br>e.g. IN4001 2 Positive<br>C e LOAD DC Output 3 Positive<br>ON 4 Negative<br>5 Negative<br>Fuse<br>Notes<br>1. With AC in, unit provides power to the load and to charge the<br>-V Lead  battery. The DC OK signal acts by sensing a voltage on +V and<br>Acid  holds the relay closed.<br>Battery<br>2. With loss of AC in, battery voltage is present on +V. DC OK<br>© N L<br>-V signal holds the relay closed. Battery supplies power to the load.<br>1 3 3. As the battery discharges, its voltage falls. When this falls below<br>[ |e ee] J<br>DNR30/60 connection for DC   the level shown in the table below the DC OK signal switches off<br>AC Input standby system applications to allow the relay to open to disconnect and protect the battery.<br>Coil<br>**----- End of picture text -----**<br>


|Output Set Voltages For StandbyVersions|Output Set Voltages For StandbyVersions|Output Set Voltages For StandbyVersions|Output Set Voltages For StandbyVersions|Output Set Voltages For StandbyVersions|
|---|---|---|---|---|
|Model(1,3)|Voltage|Current|DC OK Signal Off|Efficiency|
|DNR30US12_#_|13.6 V|2.20 A|10.30-11.30 V|84%|
|DNR30US24_#_|27.2 V|1.10 A|21.10-22.10 V|86%|
|DNR30US48_#_|54.5 V|0.55 A|42.70-43.70 V|86%|
|DNR60US12_#_(2)|13.6 V|4.40 A|10.30-11.30 V|86%|
|DNR60US24_#_|27.2 V|2.20 A|21.10-22.10 V|89%|
|DNR60US48_#_|54.5 V|1.10 A|42.70-43.70 V|89%|



## ~~**Notes**~~ 

1. Suffix # indicates standby version. 

   3. _Available for OEM quantities, contact sales._ 

2. Not UL1310 approved. 

## ~~**DC OK**~~ 

## **30/60 W Models** 

Output good = 24 V   Output not good = 0 V 

**==> picture [314 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
RL > 700Ω<br>©) N/O DCOK<br>DCOK N/C<br>22 K<br>0.5 W<br>5.1 V<br>-Vout E |©) Common -Vout 0.3 W<br>Example using external relay  Example using external components<br>to create volt-free contact to create TTL signal<br>oil<br>CC<br>**----- End of picture text -----**<br>


Standard on 24 V models, 30-60 W only. 

17 Aug 2022